aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2024-07-19target/arm: Use FPST_F16 for SME FMOPA (widening)Richard Henderson
This operation has float16 inputs and thus must use the FZ16 control not the FZ control. Cc: qemu-stable@nongnu.org Fixes: 3916841ac75 ("target/arm: Implement FMOPA, FMOPS (widening)") Reported-by: Daniyal Khan <danikhan632@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240717060149.204788-3-richard.henderson@linaro.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2374 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 207d30b5fdb5b45a36f26eefcf52fe2c1714dd4f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-19target/arm: Use float_status copy in sme_fmopa_sDaniyal Khan
We made a copy above because the fp exception flags are not propagated back to the FPST register, but then failed to use the copy. Cc: qemu-stable@nongnu.org Fixes: 558e956c719 ("target/arm: Implement FMOPA, FMOPS (non-widening)") Signed-off-by: Daniyal Khan <danikhan632@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240717060149.204788-2-richard.henderson@linaro.org [rth: Split from a larger patch] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 31d93fedf41c24b0badb38cd9317590d1ef74e37) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-02target/arm: Fix VCMLA Dd, Dn, Dm[idx]Richard Henderson
The inner loop, bounded by eltspersegment, must not be larger than the outer loop, bounded by elements. Cc: qemu-stable@nongnu.org Fixes: 18fc2405781 ("target/arm: Implement SVE fp complex multiply add (indexed)") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2376 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 76bccf3cb9d9383da0128bbc6d1300cddbe3ae8f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-01i386/cpu: fixup number of addressable IDs for processor cores in the ↵Chuang Xu
physical package When QEMU is started with: -cpu host,host-cache-info=on,l3-cache=off \ -smp 2,sockets=1,dies=1,cores=1,threads=2 Guest can't acquire maximum number of addressable IDs for processor cores in the physical package from CPUID[04H]. When creating a CPU topology of 1 core per package, host-cache-info only uses the Host's addressable core IDs field (CPUID.04H.EAX[bits 31-26]), resulting in a conflict (on the multicore Host) between the Guest core topology information in this field and the Guest's actual cores number. Fix it by removing the unnecessary condition to cover 1 core per package case. This is safe because cores_per_pkg will not be 0 and will be at least 1. Fixes: d7caf13b5fcf ("x86: cpu: fixup number of addressable IDs for logical processors sharing cache") Signed-off-by: Guixiong Wei <weiguixiong@bytedance.com> Signed-off-by: Yipeng Yin <yinyipeng@bytedance.com> Signed-off-by: Chuang Xu <xuchuangxclwt@bytedance.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240611032314.64076-1-xuchuangxclwt@bytedance.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 903916f0a017fe4b7789f1c6c6982333a5a71876) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: fixup for 7.2 due to other changes in this area past 8.2)
2024-06-11target/i386: fix size of EBP writeback in gen_enter()Mark Cave-Ayland
The calculation of FrameTemp is done using the size indicated by mo_pushpop() before being written back to EBP, but the final writeback to EBP is done using the size indicated by mo_stacksize(). In the case where mo_pushpop() is MO_32 and mo_stacksize() is MO_16 then the final writeback to EBP is done using MO_16 which can leave junk in the top 16-bits of EBP after executing ENTER. Change the writeback of EBP to use the same size indicated by mo_pushpop() to ensure that the full value is written back. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2198 Message-ID: <20240606095319.229650-5-mark.cave-ayland@ilande.co.uk> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 3973615e7fbaeef1deeaa067577e373781ced70a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-06-07target/loongarch: fix a wrong print in cpu dumplanyanzhi
description: loongarch_cpu_dump_state() want to dump all loongarch cpu state registers, but there is a tiny typographical error when printing "PRCFG2". Cc: qemu-stable@nongnu.org Signed-off-by: lanyanzhi <lanyanzhi22b@ict.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20240604073831.666690-1-lanyanzhi22b@ict.ac.cn> Signed-off-by: Song Gao <gaosong@loongson.cn> (cherry picked from commit 78f932ea1f7b3b9b0ac628dc2a91281318fe51fa) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-06-06target/i386: fix SSE and SSE2 feature checkXinyu Li
Features check of CPUID_SSE and CPUID_SSE2 should use cpuid_features, rather than cpuid_ext_features. Signed-off-by: Xinyu Li <lixinyu20s@ict.ac.cn> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240602100904.2137939-1-lixinyu20s@ict.ac.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit da7c95920d027dbb00c6879c1da0216b19509191) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-06-06target/i386: fix xsave.flat from kvm-unit-testsPaolo Bonzini
xsave.flat checks that "executing the XSETBV instruction causes a general- protection fault (#GP) if ECX = 0 and EAX[2:1] has the value 10b". QEMU allows that option, so the test fails. Add the condition. Cc: qemu-stable@nongnu.org Fixes: 892544317fe ("target/i386: implement XSAVE and XRSTOR of AVX registers", 2022-10-18) Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 7604bbc2d87d153e65e38cf2d671a5a9a35917b1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-06-01target/arm: Disable SVE extensions when SVE is disabledMarcin Juszkiewicz
Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2304 Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Message-id: 20240526204551.553282-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit daf9748ac002ec35258e5986b6257961fd04b565) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-05-30hvf: arm: Fix encodings for ID_AA64PFR1_EL1 and debug System registersZenghui Yu
We wrongly encoded ID_AA64PFR1_EL1 using {3,0,0,4,2} in hvf_sreg_match[] so we fail to get the expected ARMCPRegInfo from cp_regs hash table with the wrong key. Fix it with the correct encoding {3,0,0,4,1}. With that fixed, the Linux guest can properly detect FEAT_SSBS2 on my M1 HW. All DBG{B,W}{V,C}R_EL1 registers are also wrongly encoded with op0 == 14. It happens to work because HVF_SYSREG(CRn, CRm, 14, op1, op2) equals to HVF_SYSREG(CRn, CRm, 2, op1, op2), by definition. But we shouldn't rely on it. Cc: qemu-stable@nongnu.org Fixes: a1477da3ddeb ("hvf: Add Apple Silicon support") Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev> Reviewed-by: Alexander Graf <agraf@csgraf.de> Message-id: 20240503153453.54389-1-zenghui.yu@linux.dev Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 19ed42e8adc87a3c739f61608b66a046bb9237e2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-05-27target/i386: no single-step exception after MOV or POP SSPaolo Bonzini
Intel SDM 18.3.1.4 "If an occurrence of the MOV or POP instruction loads the SS register executes with EFLAGS.TF = 1, no single-step debug exception occurs following the MOV or POP instruction." Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit f0f0136abba688a6516647a79cc91e03fad6d5d7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: context fixup for v8.1.0-1189-gad75a51e84af "tcg: Rename cpu_env to tcg_env")
2024-05-27target/i386: disable jmp_opt if EFLAGS.RF is 1Paolo Bonzini
If EFLAGS.RF is 1, special processing in gen_eob_worker() is needed and therefore goto_tb cannot be used. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 8225bff7c5db504f50e54ef66b079854635dba70) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-05-27target-i386: hyper-v: Correct kvm_hv_handle_exit return valuedonsheng
This bug fix addresses the incorrect return value of kvm_hv_handle_exit for KVM_EXIT_HYPERV_SYNIC, which should be EXCP_INTERRUPT. Handling of KVM_EXIT_HYPERV_SYNIC in QEMU needs to be synchronous. This means that async_synic_update should run in the current QEMU vCPU thread before returning to KVM, returning EXCP_INTERRUPT to guarantee this. Returning 0 can cause async_synic_update to run asynchronously. One problem (kvm-unit-tests's hyperv_synic test fails with timeout error) caused by this bug: When a guest VM writes to the HV_X64_MSR_SCONTROL MSR to enable Hyper-V SynIC, a VM exit is triggered and processed by the kvm_hv_handle_exit function of the QEMU vCPU. This function then calls the async_synic_update function to set synic->sctl_enabled to true. A true value of synic->sctl_enabled is required before creating SINT routes using the hyperv_sint_route_new() function. If kvm_hv_handle_exit returns 0 for KVM_EXIT_HYPERV_SYNIC, the current QEMU vCPU thread may return to KVM and enter the guest VM before running async_synic_update. In such case, the hyperv_synic test’s subsequent call to synic_ctl(HV_TEST_DEV_SINT_ROUTE_CREATE, ...) immediately after writing to HV_X64_MSR_SCONTROL can cause QEMU’s hyperv_sint_route_new() function to return prematurely (because synic->sctl_enabled is false). If the SINT route is not created successfully, the SINT interrupt will not be fired, resulting in a timeout error in the hyperv_synic test. Fixes: 267e071bd6d6 (“hyperv: make overlay pages for SynIC”) Suggested-by: Chao Gao <chao.gao@intel.com> Signed-off-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com> Message-ID: <20240521200114.11588-1-dongsheng.x.zhang@intel.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 84d4b72854869821eb89813c195927fdd3078c12) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-05-27target/i386: rdpkru/wrpkru are no-prefix instructionsPaolo Bonzini
Reject 0x66/0xf3/0xf2 in front of them. Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 40a3ec7b5ffde500789d016660a171057d6b467c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-05-27target/i386: fix operand size for DATA16 REX.W POPCNTPaolo Bonzini
According to the manual, 32-bit vs 64-bit is governed by REX.W and REX ignores the 0x66 prefix. This can be confirmed with this program: #include <stdio.h> int main() { int x = 0x12340000; int y; asm("popcntl %1, %0" : "=r" (y) : "r" (x)); printf("%x\n", y); asm("mov $-1, %0; .byte 0x66; popcntl %1, %0" : "+r" (y) : "r" (x)); printf("%x\n", y); asm("mov $-1, %0; .byte 0x66; popcntq %q1, %q0" : "+r" (y) : "r" (x)); printf("%x\n", y); } which prints 5/ffff0000/5 on real hardware and 5/ffff0000/ffff0000 on QEMU. Cc: qemu-stable@nongnu.org Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 41c685dc59bb611096f3bb6a663cfa82e4cba97b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: drop removal of mo_64_32() helper function in target/i386/tcg/translate.c due to missing-in-7.2 v9.0.0-542-gaef4f4affde2 "target/i386: remove now-converted opcodes from old decoder" which removed other user of it)
2024-05-09target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASKRuihan Li
When emulated with QEMU, interrupts will never come in the following loop. However, if the NOP instruction is uncommented, interrupts will fire as normal. loop: cli call do_sti jmp loop do_sti: sti # nop ret This behavior is different from that of a real processor. For example, if KVM is enabled, interrupts will always fire regardless of whether the NOP instruction is commented or not. Also, the Intel Software Developer Manual states that after the STI instruction is executed, the interrupt inhibit should end as soon as the next instruction (e.g., the RET instruction if the NOP instruction is commented) is executed. This problem is caused because the previous code may choose not to end the TB even if the HF_INHIBIT_IRQ_MASK has just been reset (e.g., in the case where the STI instruction is immediately followed by the RET instruction), so that IRQs may not have a change to trigger. This commit fixes the problem by always terminating the current TB to give IRQs a chance to trigger when HF_INHIBIT_IRQ_MASK is reset. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Message-ID: <20240415064518.4951-4-lrh2000@pku.edu.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 6a5a63f74ba5c5355b7a8468d3d814bfffe928fb) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: context fixup due to missing-in-7.2 v8.1.0-1189-gad75a51e84 "tcg: Rename cpu_env to tcg_env")
2024-04-10target/sh4: add missing CHECK_NOT_DELAY_SLOTZack Buhman
CHECK_NOT_DELAY_SLOT is correctly applied to the branch-related instructions, but not to the PC-relative mov* instructions. I verified the existence of an illegal slot exception on a SH7091 when any of these instructions are attempted inside a delay slot. This also matches the behavior described in the SH-4 ISA manual. Signed-off-by: Zack Buhman <zack@buhman.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240407150705.5965-1-zack@buhman.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewd-by: Yoshinori Sato <ysato@users.sourceforge.jp> (cherry picked from commit b754cb2dcde26a7bc8a9d17bb6900a0ac0dd38e2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: trivial context (whitespace before comments) fixup)
2024-04-09target/hppa: Clear psw_n for BE on use_nullify_skip pathRichard Henderson
Along this path we have already skipped the insn to be nullified, so the subsequent insn should be executed. Cc: qemu-stable@nongnu.org Reported-by: Sven Schnelle <svens@stackframe.org> Tested-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit 4a3aa11e1fb25c28c24a43fd2835c429b00a463d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-09target/loongarch: Fix qemu-system-loongarch64 assert failed with the option ↵Song Gao
'-d int' qemu-system-loongarch64 assert failed with the option '-d int', the helper_idle() raise an exception EXCP_HLT, but the exception name is undefined. Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240321123606.1704900-1-gaosong@loongson.cn> (cherry picked from commit 1590154ee4376819a8c6ee61e849ebf4a4e7cd02) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: fixup for lack of 2 commits adding new entries into excp_names[]: v8.0.0-514-ga3f3db5cda "target/loongarch: Add CHECK_SXE maccro for check LSX enable" and v8.1.0-801-gb8f1bdf3d1 "target/loongarch: check_vec support check LASX instructions")
2024-04-09target/i386: Revert monitor_puts() in do_inject_x86_mce()Tao Su
monitor_puts() doesn't check the monitor pointer, but do_inject_x86_mce() may have a parameter with NULL monitor pointer. Revert monitor_puts() in do_inject_x86_mce() to fix, then the fact that we send the same message to monitor and log is again more obvious. Fixes: bf0c50d4aa85 (monitor: expose monitor_puts to rest of code) Reviwed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Tao Su <tao1.su@linux.intel.com> Message-ID: <20240320083640.523287-1-tao1.su@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 7fd226b04746f0be0b636de5097f1b42338951a0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-09target/i386: fix direction of "32-bit MMU" testPaolo Bonzini
The low bit of MMU indices for x86 TCG indicates whether the processor is in 32-bit mode and therefore linear addresses have to be masked to 32 bits. However, the index was computed incorrectly, leading to possible conflicts in the TLB for any address above 4G. Analyzed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Fixes: b1661801c18 ("target/i386: Fix physical address truncation", 2024-02-28) Fixes: 1c15f97b4f1 ("target/i386: Fix physical address truncation" in stable-7.2) Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2206 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 2cc68629a6fc198f4a972698bdd6477f883aedfb) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: move changes for x86_cpu_mmu_index() to cpu_mmu_index() due to missing v8.2.0-1030-gace0c5fe59 "target/i386: Populate CPUClass.mmu_index")
2024-04-09target/i386: use separate MMU indexes for 32-bit accessesPaolo Bonzini
Accesses from a 32-bit environment (32-bit code segment for instruction accesses, EFER.LMA==0 for processor accesses) have to mask away the upper 32 bits of the address. While a bit wasteful, the easiest way to do so is to use separate MMU indexes. These days, QEMU anyway is compiled with a fixed value for NB_MMU_MODES. Split MMU_USER_IDX, MMU_KSMAP_IDX and MMU_KNOSMAP_IDX in two. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 90f641531c782c873a05895f411c05fbbbef3c49) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: move changes for x86_cpu_mmu_index() to cpu_mmu_index() due to missing v8.2.0-1030-gace0c5fe5950 "target/i386: Populate CPUClass.mmu_index" Increase NB_MMU_MODES from 5 to 8 in target/i386/cpu-param.h due to missing v7.2.0-2640-gffd824f3f32d "include/exec: Set default NB_MMU_MODES to 16" v7.2.0-2647-g6787318a5d86 "target/i386: Remove NB_MMU_MODES define" which relaxed upper limit of MMU index for i386, since this commit starts using MMU_NESTED_IDX=7. Thanks Zhao Liu and Paolo Bonzini for the analisys and suggestions. )
2024-03-21target/i386: introduce function to query MMU indicesPaolo Bonzini
Remove knowledge of specific MMU indexes (other than MMU_NESTED_IDX and MMU_PHYS_IDX) from mmu_translate(). This will make it possible to split 32-bit and 64-bit MMU indexes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 5f97afe2543f09160a8d123ab6e2e8c6d98fa9ce) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: context fixup in target/i386/cpu.h due to other changes in that area)
2024-03-13target/arm: Fix SME full tile indexingRichard Henderson
For the outer product set of insns, which take an entire matrix tile as output, the argument is not a combined tile+column. Therefore using get_tile_rowcol was incorrect, as we extracted the tile number from itself. The test case relies only on assembler support for SME, since no release of GCC recognizes -march=armv9-a+sme yet. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: dropped now-unneeded changes to sysregs CFLAGS] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 1f51573f7925b80e79a29f87c7d9d6ead60960c0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-13target/arm: align exposed ID registers with LinuxZhuojia Shen
In CPUID registers exposed to userspace, some registers were missing and some fields were not exposed. This patch aligns exposed ID registers and their fields with what the upstream kernel currently exposes. Specifically, the following new ID registers/fields are exposed to userspace: ID_AA64PFR1_EL1.BT: bits 3-0 ID_AA64PFR1_EL1.MTE: bits 11-8 ID_AA64PFR1_EL1.SME: bits 27-24 ID_AA64ZFR0_EL1.SVEver: bits 3-0 ID_AA64ZFR0_EL1.AES: bits 7-4 ID_AA64ZFR0_EL1.BitPerm: bits 19-16 ID_AA64ZFR0_EL1.BF16: bits 23-20 ID_AA64ZFR0_EL1.SHA3: bits 35-32 ID_AA64ZFR0_EL1.SM4: bits 43-40 ID_AA64ZFR0_EL1.I8MM: bits 47-44 ID_AA64ZFR0_EL1.F32MM: bits 55-52 ID_AA64ZFR0_EL1.F64MM: bits 59-56 ID_AA64SMFR0_EL1.F32F32: bit 32 ID_AA64SMFR0_EL1.B16F32: bit 34 ID_AA64SMFR0_EL1.F16F32: bit 35 ID_AA64SMFR0_EL1.I8I32: bits 39-36 ID_AA64SMFR0_EL1.F64F64: bit 48 ID_AA64SMFR0_EL1.I16I64: bits 55-52 ID_AA64SMFR0_EL1.FA64: bit 63 ID_AA64MMFR0_EL1.ECV: bits 63-60 ID_AA64MMFR1_EL1.AFP: bits 47-44 ID_AA64MMFR2_EL1.AT: bits 35-32 ID_AA64ISAR0_EL1.RNDR: bits 63-60 ID_AA64ISAR1_EL1.FRINTTS: bits 35-32 ID_AA64ISAR1_EL1.BF16: bits 47-44 ID_AA64ISAR1_EL1.DGH: bits 51-48 ID_AA64ISAR1_EL1.I8MM: bits 55-52 ID_AA64ISAR2_EL1.WFxT: bits 3-0 ID_AA64ISAR2_EL1.RPRES: bits 7-4 ID_AA64ISAR2_EL1.GPA3: bits 11-8 ID_AA64ISAR2_EL1.APA3: bits 15-12 The code is also refactored to use symbolic names for ID register fields for better readability and maintainability. The test case in tests/tcg/aarch64/sysregs.c is also updated to match the intended behavior. Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com> Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit bc6bd20ee3538347afb750c4bd06edca4a922897) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: pick this for v8.0.0-2361-g1f51573f79 "target/arm: Fix SME full tile indexing")
2024-02-28target/i386: leave the A20 bit set in the final NPT walkPaolo Bonzini
The A20 mask is only applied to the final memory access. Nested page tables are always walked with the raw guest-physical address. Unlike the previous patch, in this one the masking must be kept, but it was done too early. Cc: qemu-stable@nongnu.org Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit b5a9de3259f4c791bde2faff086dd5737625e41e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-28target/i386: remove unnecessary/wrong application of the A20 maskPaolo Bonzini
If ptw_translate() does a MMU_PHYS_IDX access, the A20 mask is already applied in get_physical_address(), which is called via probe_access_full() and x86_cpu_tlb_fill(). If ptw_translate() on the other hand does a MMU_NESTED_IDX access, the A20 mask must not be applied to the address that is looked up in the nested page tables; it must be applied only to the addresses that hold the NPT entries (which is achieved via MMU_PHYS_IDX, per the previous paragraph). Therefore, we can remove A20 masking from the computation of the page table entry's address, and let get_physical_address() or mmu_translate() apply it when they know they are returning a host-physical address. Cc: qemu-stable@nongnu.org Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit a28fe7dc1939333c81b895cdced81c69eb7c5ad0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-28target/i386: Fix physical address truncationPaolo Bonzini
The address translation logic in get_physical_address() will currently truncate physical addresses to 32 bits unless long mode is enabled. This is incorrect when using physical address extensions (PAE) outside of long mode, with the result that a 32-bit operating system using PAE to access memory above 4G will experience undefined behaviour. The truncation code was originally introduced in commit 33dfdb5 ("x86: only allow real mode to access 32bit without LMA"), where it applied only to translations performed while paging is disabled (and so cannot affect guests using PAE). Commit 9828198 ("target/i386: Add MMU_PHYS_IDX and MMU_NESTED_IDX") rearranged the code such that the truncation also applied to the use of MMU_PHYS_IDX and MMU_NESTED_IDX. Commit 4a1e9d4 ("target/i386: Use atomic operations for pte updates") brought this truncation into scope for page table entry accesses, and is the first commit for which a Windows 10 32-bit guest will reliably fail to boot if memory above 4G is present. The truncation code however is not completely redundant. Even though the maximum address size for any executed instruction is 32 bits, helpers for operations such as BOUND, FSAVE or XSAVE may ask get_physical_address() to translate an address outside of the 32-bit range, if invoked with an argument that is close to the 4G boundary. Likewise for processor accesses, for example TSS or IDT accesses, when EFER.LMA==0. So, move the address truncation in get_physical_address() so that it applies to 32-bit MMU indexes, but not to MMU_PHYS_IDX and MMU_NESTED_IDX. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2040 Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Cc: qemu-stable@nongnu.org Co-developed-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit b1661801c184119a10ad6cbc3b80330fc22e7b2c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: drop unrelated change in target/i386/cpu.c)
2024-02-28target/i386: check validity of VMCB addressesPaolo Bonzini
MSR_VM_HSAVE_PA bits 0-11 are reserved, as are the bits above the maximum physical address width of the processor. Setting them to 1 causes a #GP (see "15.30.4 VM_HSAVE_PA MSR" in the AMD manual). The same is true of VMCB addresses passed to VMRUN/VMLOAD/VMSAVE, even though the manual is not clear on that. Cc: qemu-stable@nongnu.org Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit d09c79010ffd880dc69e7a21e3cfdef90b928fb8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-28target/i386: mask high bits of CR3 in 32-bit modePaolo Bonzini
CR3 bits 63:32 are ignored in 32-bit mode (either legacy 2-level paging or PAE paging). Do this in mmu_translate() to remove the last where get_physical_address() meaningfully drops the high bits of the address. Cc: qemu-stable@nongnu.org Suggested-by: Richard Henderson <richard.henderson@linaro.org> Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 68fb78d7d5723066ec2cacee7d25d67a4143b42f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-24target/ppc: Fix lxv/stxv MSR facility checkNicholas Piggin
The move to decodetree flipped the inequality test for the VEC / VSX MSR facility check. This caused application crashes under Linux, where these facility unavailable interrupts are used for lazy-switching of VEC/VSX register sets. Getting the incorrect interrupt would result in wrong registers being loaded, potentially overwriting live values and/or exposing stale ones. Cc: qemu-stable@nongnu.org Reported-by: Joel Stanley <joel@jms.id.au> Fixes: 70426b5bb738 ("target/ppc: moved stxvx and lxvx from legacy to decodtree") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1769 Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Tested-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> (cherry picked from commit 2cc0e449d17310877fb28a942d4627ad22bb68ea) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-20target/i386: Generate an illegal opcode exception on cmp instructions with ↵Ziqiao Kong
lock prefix target/i386: As specified by Intel Manual Vol2 3-180, cmp instructions are not allowed to have lock prefix and a `UD` should be raised. Without this patch, s1->T0 will be uninitialized and used in the case OP_CMPL. Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com> Message-ID: <20240215095015.570748-2-ziqiaokong@gmail.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 99d0dcd7f102c07a510200d768cae65e5db25d23) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-20i386/cpuid: Move leaf 7 to correct groupXiaoyao Li
CPUID leaf 7 was grouped together with SGX leaf 0x12 by commit b9edbadefb9e ("i386: Propagate SGX CPUID sub-leafs to KVM") by mistake. SGX leaf 0x12 has its specific logic to check if subleaf (starting from 2) is valid or not by checking the bit 0:3 of corresponding EAX is 1 or not. Leaf 7 follows the logic that EAX of subleaf 0 enumerates the maximum valid subleaf. Fixes: b9edbadefb9e ("i386: Propagate SGX CPUID sub-leafs to KVM") Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-ID: <20240125024016.2521244-4-xiaoyao.li@intel.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 0729857c707535847d7fe31d3d91eb8b2a118e3c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-20i386/cpuid: Decrease cpuid_i when skipping CPUID leaf 1FXiaoyao Li
Existing code misses a decrement of cpuid_i when skip leaf 0x1F. There's a blank CPUID entry(with leaf, subleaf as 0, and all fields stuffed 0s) left in the CPUID array. It conflicts with correct CPUID leaf 0. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by:Yang Weijiang <weijiang.yang@intel.com> Message-ID: <20240125024016.2521244-2-xiaoyao.li@intel.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 10f92799af8ba3c3cef2352adcd4780f13fbab31) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-20i386/cpu: Mask with XCR0/XSS mask for FEAT_XSAVE_XCR0_HI and ↵Xiaoyao Li
FEAT_XSAVE_XSS_HI leafs The value of FEAT_XSAVE_XCR0_HI leaf and FEAT_XSAVE_XSS_HI leaf also need to be masked by XCR0 and XSS mask respectively, to make it logically correct. Fixes: 301e90675c3f ("target/i386: Enable support for XSAVES based features") Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Yang Weijiang <weijiang.yang@intel.com> Message-ID: <20240115091325.1904229-3-xiaoyao.li@intel.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit a11a365159b944e05be76f3ec3b98c8b38cb70fd) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-20i386/cpu: Clear FEAT_XSAVE_XSS_LO/HI leafs when CPUID_EXT_XSAVE is not availableXiaoyao Li
Leaf FEAT_XSAVE_XSS_LO and FEAT_XSAVE_XSS_HI also need to be cleared when CPUID_EXT_XSAVE is not set. Fixes: 301e90675c3f ("target/i386: Enable support for XSAVES based features") Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Yang Weijiang <weijiang.yang@intel.com> Message-ID: <20240115091325.1904229-2-xiaoyao.li@intel.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 81f5cad3858f27623b1b14467926032d229b76cc) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-16target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ↵Peter Maydell
ARM_FEATURE_PMU It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile CPU, and in fact if you try to do it we will assert: #6 0x00007ffff4b95e96 in __GI___assert_fail (assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101 #7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600 #8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595 #9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512 We might call pmu_counter_enabled() on an M-profile CPU (for example from the migration pre/post hooks in machine.c); this should always return false because these CPUs don't set ARM_FEATURE_PMU. Avoid the assertion by not calling arm_mdcr_el2_eff() before we have done the early return for "PMU not present". This fixes an assertion failure if you try to do a loadvm or savevm for an M-profile board. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240208153346.970021-1-peter.maydell@linaro.org (cherry picked from commit ac1d88e9e7ca0bed83e91e07ce6d0597f10cc77d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-16target/arm: Fix SVE/SME gross MTE suppression checksRichard Henderson
The TBI and TCMA bits are located within mtedesc, not desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 855f94eca80c85a99f459e36684ea2f98f6a3243) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-16target/arm: Fix nregs computation in do_{ld,st}_zpaRichard Henderson
The field is encoded as [0-3], which is convenient for indexing our array of function pointers, but the true value is [1-4]. Adjust before calling do_mem_zpa. Add an assert, and move the comment re passing ZT to the helper back next to the relevant code. Cc: qemu-stable@nongnu.org Fixes: 206adacfb8d ("target/arm: Add mte helpers for sve scalar + int loads") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 64c6e7444dff64b42d11b836b9aec9acfbe8ecc2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-03target/arm: fix exception syndrome for AArch32 bkpt insnJan Klötzke
Debug exceptions that target AArch32 Hyp mode are reported differently than on AAarch64. Internally, Qemu uses the AArch64 syndromes. Therefore such exceptions need to be either converted to a prefetch abort (breakpoints, vector catch) or a data abort (watchpoints). Cc: qemu-stable@nongnu.org Signed-off-by: Jan Klötzke <jan.kloetzke@kernkonzept.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240127202758.3326381-1-jan.kloetzke@kernkonzept.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit f670be1aad33e801779af580398895b9455747ee) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-27target/xtensa: fix OOB TLB entry accessMax Filippov
r[id]tlb[01], [iw][id]tlb opcodes use TLB way index passed in a register by the guest. The host uses 3 bits of the index for ITLB indexing and 4 bits for DTLB, but there's only 7 entries in the ITLB array and 10 in the DTLB array, so a malicious guest may trigger out-of-bound access to these arrays. Change split_tlb_entry_spec return type to bool to indicate whether TLB way passed to it is valid. Change get_tlb_entry to return NULL in case invalid TLB way is requested. Add assertion to xtensa_tlb_get_entry that requested TLB way and entry indices are valid. Add checks to the [rwi]tlb helpers that requested TLB way is valid and return 0 or do nothing when it's not. Cc: qemu-stable@nongnu.org Fixes: b67ea0cd7441 ("target-xtensa: implement memory protection options") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20231215120307.545381-1-jcmvbkbc@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 604927e357c2b292c70826e4ce42574ad126ef32) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-20target/i386: pcrel: store low bits of physical address in data[0]Paolo Bonzini
For PC-relative translation blocks, env->eip changes during the execution of a translation block, Therefore, QEMU must be able to recover an instruction's PC just from the TranslationBlock struct and the instruction data with. Because a TB will not span two pages, QEMU stores all the low bits of EIP in the instruction data and replaces them in x86_restore_state_to_opc. Bits 12 and higher (which may vary between executions of a PCREL TB, since these only use the physical address in the hash key) are kept unmodified from env->eip. The assumption is that these bits of EIP, unlike bits 0-11, will not change as the translation block executes. Unfortunately, this is incorrect when the CS base is not aligned to a page. Then the linear address of the instructions (i.e. the one with the CS base addred) indeed will never span two pages, but bits 12+ of EIP can actually change. For example, if CS base is 0x80262200 and EIP = 0x6FF4, the first instruction in the translation block will be at linear address 0x802691F4. Even a very small TB will cross to EIP = 0x7xxx, while the linear addresses will remain comfortably within a single page. The fix is simply to use the low bits of the linear address for data[0], since those don't change. Then x86_restore_state_to_opc uses tb->cs_base to compute a temporary linear address (referring to some unknown instruction in the TB, but with the correct values of bits 12 and higher); the low bits are replaced with data[0], and EIP is obtained by subtracting again the CS base. Huge thanks to Mark Cave-Ayland for the image and initial debugging, and to Gitlab user @kjliew for help with bisecting another occurrence of (hopefully!) the same bug. It should be relatively easy to write a testcase that performs MMIO on an EIP with different bits 12+ than the first instruction of the translation block; any help is welcome. Fixes: e3a79e0e878 ("target/i386: Enable TARGET_TB_PCREL", 2022-10-11) Cc: qemu-stable@nongnu.org Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Richard Henderson <richard.henderson@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1759 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1964 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2012 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 729ba8e933f8af5800c3a92b37e630e9bdaa9f1e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: fixup in target/i386/tcg/tcg-cpu.c target/i386/tcg/translate.c for v7.2.0-1839-g2e3afe8e19 "target/i386: Replace `TARGET_TB_PCREL` with `CF_PCREL`")
2024-01-20target/i386: fix incorrect EIP in PC-relative translation blocksguoguangyao
The PCREL patches introduced a bug when updating EIP in the !CF_PCREL case. Using s->pc in func gen_update_eip_next() solves the problem. Cc: qemu-stable@nongnu.org Fixes: b5e0d5d22fbf ("target/i386: Fix 32-bit wrapping of pc/eip computation") Signed-off-by: guoguangyao <guoguangyao18@mails.ucas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240115020804.30272-1-guoguangyao18@mails.ucas.ac.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 2926eab8969908bc068629e973062a0fb6ff3759) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-20target/i386: Do not re-compute new pc with CF_PCRELRichard Henderson
With PCREL, we have a page-relative view of EIP, and an approximation of PC = EIP+CSBASE that is good enough to detect page crossings. If we try to recompute PC after masking EIP, we will mess up that approximation and write a corrupt value to EIP. We already handled masking properly for PCREL, so the fix in b5e0d5d2 was only needed for the !PCREL path. Cc: qemu-stable@nongnu.org Fixes: b5e0d5d22fbf ("target/i386: Fix 32-bit wrapping of pc/eip computation") Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240101230617.129349-1-richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit a58506b748b8988a95f4fa1a2420ac5c17038b30) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-20target/i386: Fix 32-bit wrapping of pc/eip computationRichard Henderson
In 32-bit mode, pc = eip + cs_base is also 32-bit, and must wrap. Failure to do so results in incorrect memory exceptions to the guest. Before 732d548732ed, this was implicitly done via truncation to target_ulong but only in qemu-system-i386, not qemu-system-x86_64. To fix this, we must add conditional zero-extensions. Since we have to test for 32 vs 64-bit anyway, note that cs_base is always zero in 64-bit mode. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2022 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20231212172510.103305-1-richard.henderson@linaro.org> (cherry picked from commit b5e0d5d22fbffc3d8f7d3e86d7a2d05a1a974e27) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: context fix in target/i386/tcg/tcg-cpu.c for v8.1.0-1190-gb77af26e97 "accel/tcg: Replace CPUState.env_ptr with cpu_env()") (Mjt: fixup in target/i386/tcg/tcg-cpu.c for v7.2.0-1854-g34a39c2443 "target/i386: Replace `tb_pc()` with `tb->pc`")
2024-01-13target/s390x: Fix LAE setting a wrong access registerIlya Leoshkevich
LAE should set the access register corresponding to the first operand, instead, it always modifies access register 1. Co-developed-by: Ido Plat <Ido.Plat@ibm.com> Cc: qemu-stable@nongnu.org Fixes: a1c7610a6879 ("target-s390x: implement LAY and LAEY instructions") Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-ID: <20240111092328.929421-2-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com> (cherry picked from commit e358a25a97c71c39e3513d9b869cdb82052e50b8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: target/s390x/tcg/translate.c: fixup for v8.1.0-1189-gad75a51e84 "tcg: Rename cpu_env to tcg_env" and v7.2.0-2636-g3ac6f91bca "target/s390x: Drop tcg_temp_free from translate.c")
2024-01-08target/riscv: Fix mcycle/minstret increment behaviorXu Lu
The mcycle/minstret counter's stop flag is mistakenly updated on a copy on stack. Thus the counter increments even when the CY/IR bit in the mcountinhibit register is set. This commit corrects its behavior. Fixes: 3780e33732f88 (target/riscv: Support mcycle/minstret write operation) Signed-off-by: Xu Lu <luxu.kernel@bytedance.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (cherry picked from commit 5cb0e7abe1635cb82e0033260dac2b910d142f8c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-12-20target/arm/helper: Propagate MDCR_EL2.HPMN into PMCR_EL0.NJean-Philippe Brucker
MDCR_EL2.HPMN allows an hypervisor to limit the number of PMU counters available to EL1 and EL0 (to keep the others to itself). QEMU already implements this split correctly, except for PMCR_EL0.N reads: the number of counters read by EL1 or EL0 should be the one configured in MDCR_EL2.HPMN. Cc: qemu-stable@nongnu.org Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20231215144652.4193815-2-jean-philippe@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 6980c31dec42b6daebf7fec13b2d39ed87bb4766) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-12-20target/arm: Disable SME if SVE is disabledPeter Maydell
There is no architectural requirement that SME implies SVE, but our implementation currently assumes it. (FEAT_SME_FA64 does imply SVE.) So if you try to run a CPU with eg "-cpu max,sve=off" you quickly run into an assert when the guest tries to write to SMCR_EL1: #6 0x00007ffff4b38e96 in __GI___assert_fail (assertion=0x5555566e69cb "sm", file=0x5555566e5b24 "../../target/arm/helper.c", line=6865, function=0x5555566e82f0 <__PRETTY_FUNCTION__.31> "sve_vqm1_for_el_sm") at ./assert/assert.c:101 #7 0x0000555555ee33aa in sve_vqm1_for_el_sm (env=0x555557d291f0, el=2, sm=false) at ../../target/arm/helper.c:6865 #8 0x0000555555ee3407 in sve_vqm1_for_el (env=0x555557d291f0, el=2) at ../../target/arm/helper.c:6871 #9 0x0000555555ee3724 in smcr_write (env=0x555557d291f0, ri=0x555557da23b0, value=2147483663) at ../../target/arm/helper.c:6995 #10 0x0000555555fd1dba in helper_set_cp_reg64 (env=0x555557d291f0, rip=0x555557da23b0, value=2147483663) at ../../target/arm/tcg/op_helper.c:839 #11 0x00007fff60056781 in code_gen_buffer () Avoid this unsupported and slightly odd combination by disabling SME when SVE is not present. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2005 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20231127173318.674758-1-peter.maydell@linaro.org (cherry picked from commit f7767ca301796334f74b9b642b395a4bd3e3dbac) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-12-05target/arm: Set IL bit for pauth, SVE access, BTI trap syndromesPeter Maydell
The syndrome register value always has an IL field at bit 25, which is 0 for a trap on a 16 bit instruction, and 1 for a trap on a 32 bit instruction (or for exceptions which aren't traps on a known instruction, like PC alignment faults). This means that our syn_*() functions should always either take an is_16bit argument to determine whether to set the IL bit, or else unconditionally set it. We missed setting the IL bit for the syndrome for three kinds of trap: * an SVE access exception * a pointer authentication check failure * a BTI (branch target identification) check failure All of these traps are AArch64 only, and so the instruction causing the trap is always 64 bit. This means we can unconditionally set the IL bit in the syn_*() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20231120150121.3458408-1-peter.maydell@linaro.org Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 11a3c4a286d5dc603582ea0a1fca62c2ec0a1aee) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-20 14:39:59 +0000