aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2019-03-19target/riscv: Remove unused structAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Update load reservation comment in do_interruptMichael Clark
Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Convert trap debugging to trace eventsMichael Clark
Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Add support for vectored interruptsMichael Clark
If vectored interrupts are enabled (bits[1:0] of mtvec/stvec == 1) then use the following logic for trap entry address calculation: pc = mtvec + cause * 4 In addition to adding support for vectored interrupts this patch simplifies the interrupt delivery logic by making sync/async cause decoding and encoding steps distinct. The cause code and the sign bit indicating sync/async is split at the beginning of the function and fixed cause is renamed to cause. The MSB setting for async traps is delayed until setting mcause/scause to allow redundant variables to be eliminated. Some variables are renamed for conciseness and moved so that decls are at the start of the block. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Change local interrupts from edge to levelMichael Clark
This effectively changes riscv_cpu_update_mip from edge to level. i.e. cpu_interrupt or cpu_reset_interrupt are called regardless of the current interrupt level. Fixes WFI doesn't return when a IPI is issued: - https://github.com/riscv/riscv-qemu/issues/132 To test: 1) Apply RISC-V Linux CPU hotplug patch: - http://lists.infradead.org/pipermail/linux-riscv/2018-May/000603.html 2) Enable CONFIG_CPU_HOTPLUG in linux .config 3) Try to offline and online cpus: echo 1 > /sys/devices/system/cpu/cpu2/online echo 0 > /sys/devices/system/cpu/cpu2/online echo 1 > /sys/devices/system/cpu/cpu2/online Reported-by: Atish Patra <atishp04@gmail.com> Cc: Atish Patra <atishp04@gmail.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: linux-user support for RVE ABIKito Cheng
This change checks elf_flags for EF_RISCV_RVE and if present uses the RVE linux syscall ABI which uses t0 for the syscall number instead of a7. Warn and exit if a non-RVE ABI binary is run on a cpu with the RVE extension as it is incompatible. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Co-authored-by: Kito Cheng <kito.cheng@gmail.com> Co-authored-by: Michael Clark <mjc@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Allow interrupt controllers to claim interruptsMichael Clark
We can't allow the supervisor to control SEIP as this would allow the supervisor to clear a pending external interrupt which will result in lost a interrupt in the case a PLIC is attached. The SEIP bit must be hardware controlled when a PLIC is attached. This logic was previously hard-coded so SEIP was always masked even if no PLIC was attached. This patch adds riscv_cpu_claim_interrupts so that the PLIC can register control of SEIP. In the case of models without a PLIC (spike), the SEIP bit remains software controlled. This interface allows for hardware control of supervisor timer and software interrupts by other interrupt controller models. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19riscv: pmp: Log pmp access errors as guest errorsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Add hooks to use the gdb xml files.Jim Wilson
The gdb CSR xml file has registers in documentation order, not numerical order, so we need a table to map the register numbers. This also adds fairly standard gdb hooks to access xml specified registers. notice: The fpu xml from gdb 8.3 has unused register #, 65 and make first csr register # become 69. We register extra register on gdb to correct csr offset calculation Signed-off-by: Jim Wilson <jimw@sifive.com> Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Add debug support for accessing CSRs.Jim Wilson
Add a debugger field to CPURISCVState. Add riscv_csrrw_debug function to set it. Disable mode checks when debugger field true. Signed-off-by: Jim Wilson <jimw@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190212230903.9215-1-jimw@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Fixes to CSR_* register macros.Jim Wilson
This adds some missing CSR_* register macros, and documents some as being priv v1.9.1 specific. Signed-off-by: Jim Wilson <jimw@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190212230830.9160-1-jimw@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-17target/riscv: Fix manually parsed 16 bit insnBastian Koppelmann
during the refactor to decodetree we removed the manual decoding that is necessary for c.jal/c.addiw and removed the translation of c.flw/c.ld and c.fsw/c.sd. This reintroduces the manual parsing and the omited implementation. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Tested-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-15target/hppa: Avoid squishing DISAS_IAQ_N_STALE_EXITRichard Henderson
Within a delay slot, we were squishing both DISAS_IAQ_N_STALE and DISAS_IAQ_N_STALE_EXIT to DISAS_IAQ_N_UPDATED. This lost the required exit to the main loop, and could result in interrupts never being delivered. Tested-by: Sven Schnelle <svens@stackframe.org> Reported-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-15target/arm: Check access permission to ADDVL/ADDPL/RDVLAmir Charif
These instructions do not trap when SVE is disabled in EL0, causing them to be executed with wrong size information. Signed-off-by: Amir Charif <amir.charif@cea.fr> Message-id: 1552579248-31025-1-git-send-email-amir.charif@cea.fr Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added 'target/arm' prefix to subject] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-15target/arm: change arch timer registers access permissionDongjiu Geng
Some generic arch timer registers are Config-RW in the EL0, which means the EL0 exception level can have write permission if it is appropriately configured. When VM access registers, QEMU firstly checks whether they have RW permission, then check whether it is appropriately configured. If they are defined to read only in EL0, even though they have been appropriately configured, they still do not have write permission. So need to add the write permission according to ARMV8 spec when define it. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Message-id: 1552395177-12608-1-git-send-email-gengdongjiu@huawei.com Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-13Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.0-sf4' ↵Peter Maydell
into staging target/riscv: Convert to decodetree Bastian: this patchset converts the RISC-V decoder to decodetree in four major steps: 1) Convert 32-bit instructions to decodetree [Patch 1-15]: Many of the gen_* functions are called by the decode functions for 16-bit and 32-bit functions. If we move translation code from the gen_* functions to the generated trans_* functions of decode-tree, we get a lot of duplication. Therefore, we mostly generate calls to the old gen_* function which are properly replaced after step 2). Each of the trans_ functions are grouped into files corresponding to their ISA extension, e.g. addi which is in RV32I is translated in the file 'trans_rvi.inc.c'. 2) Convert 16-bit instructions to decodetree [Patch 16-18]: All 16 bit instructions have a direct mapping to a 32 bit instruction. Thus, we convert the arguments in the 16 bit trans_ function to the arguments of the corresponding 32 bit instruction and call the 32 bit trans_ function. 3) Remove old manual decoding in gen_* function [Patch 19-29]: this move all manual translation code into the trans_* instructions of decode tree, such that we can remove the old decode_* functions. Palmer: This, with some additional cleanup patches, passed Alistar's testing on rv32 and rv64 as well as my testing on rv64, so I think it's good to go. I've run my standard test against this exact tag. I still don't have a Mac to try this on, sorry! # gpg: Signature made Wed 13 Mar 2019 13:44:49 GMT # gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41 # gpg: issuer "palmer@dabbelt.com" # gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown] # gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41 * remotes/palmer/tags/riscv-for-master-4.0-sf4: (29 commits) target/riscv: Remove decode_RV32_64G() target/riscv: Remove gen_system() target/riscv: Rename trans_arith to gen_arith target/riscv: Remove manual decoding of RV32/64M insn target/riscv: Remove shift and slt insn manual decoding target/riscv: make ADD/SUB/OR/XOR/AND insn use arg lists target/riscv: Move gen_arith_imm() decoding into trans_* functions target/riscv: Remove manual decoding from gen_store() target/riscv: Remove manual decoding from gen_load() target/riscv: Remove manual decoding from gen_branch() target/riscv: Remove gen_jalr() target/riscv: Convert quadrant 2 of RVXC insns to decodetree target/riscv: Convert quadrant 1 of RVXC insns to decodetree target/riscv: Convert quadrant 0 of RVXC insns to decodetree target/riscv: Convert RV priv insns to decodetree target/riscv: Convert RV64D insns to decodetree target/riscv: Convert RV32D insns to decodetree target/riscv: Convert RV64F insns to decodetree target/riscv: Convert RV32F insns to decodetree target/riscv: Convert RV64A insns to decodetree ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-13target/riscv: Remove decode_RV32_64G()Bastian Koppelmann
decodetree handles all instructions now so the fallback is not necessary anymore. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Remove gen_system()Bastian Koppelmann
with all 16 bit insns moved to decodetree no path is falling back to gen_system(), so we can remove it. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Rename trans_arith to gen_arithBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2019-03-13target/riscv: Remove manual decoding of RV32/64M insnBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Remove shift and slt insn manual decodingBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: make ADD/SUB/OR/XOR/AND insn use arg listsBastian Koppelmann
manual decoding in gen_arith() is not necessary with decodetree. For now the function is called trans_arith as the original gen_arith still exists. The former will be renamed to gen_arith as soon as the old gen_arith can be removed. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Move gen_arith_imm() decoding into trans_* functionsBastian Koppelmann
gen_arith_imm() does a lot of decoding manually, which was hard to read in case of the shift instructions and is not necessary anymore with decodetree. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Remove manual decoding from gen_store()Bastian Koppelmann
With decodetree we don't need to convert RISC-V opcodes into to MemOps as the old gen_store() did. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Remove manual decoding from gen_load()Bastian Koppelmann
With decodetree we don't need to convert RISC-V opcodes into to MemOps as the old gen_load() did. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Remove manual decoding from gen_branch()Bastian Koppelmann
We now utilizes argument-sets of decodetree such that no manual decoding is necessary. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Remove gen_jalr()Bastian Koppelmann
trans_jalr() is the only caller, so move the code into trans_jalr(). Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert quadrant 2 of RVXC insns to decodetreeBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert quadrant 1 of RVXC insns to decodetreeBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert quadrant 0 of RVXC insns to decodetreeBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RV priv insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RV64D insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RV32D insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RV64F insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RV32F insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RV64A insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RV32A insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RVXM insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RVXI csr insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RVXI fence insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RVXI arithmetic insns to decodetreeBastian Koppelmann
we cannot remove the call to gen_arith() in decode_RV32_64G() since it is used to translate multiply instructions. Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RV64I load/store insns to decodetreeBastian Koppelmann
this splits the 64-bit only instructions into its own decode file such that we generate the decoder for these instructions only for the RISC-V 64 bit target. Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RV32I load/store insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Convert RVXI branch insns to decodetreeBastian Koppelmann
Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-13target/riscv: Activate decodetree and implemnt LUI & AUIPCBastian Koppelmann
for now only LUI & AUIPC are decoded and translated. If decodetree fails, we fall back to the old decoder. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
2019-03-12target/hppa: exit TB if either Data or Instruction TLB changesSven Schnelle
The current code assumes that we don't need to exit the TB if a Data Cache Flush or Insert has happend. However, as we have a shared Data/Instruction TLB, a Data cache flush also flushes Instruction TLB entries, and a Data cache TLB insert might also evict a Instruction TLB entry. So exit the TB in all cases if Instruction translation is enabled. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-11-svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: add TLB protection id checkSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-10-svens@stackframe.org> [rth: Add required tlb flushing when prot id registers change.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: allow multiple itlbp without itlbaSven Schnelle
The ODE software calls itlbp on existing TLB entries without calling itlba first, so this seems to be valid. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-9-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: fix b,gate instructionSven Schnelle
b,gate does GR[t] ← cat(GR[t]{0..29},IAOQ_Front{30..31}); instead of saving the link address to register t. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-8-svens@stackframe.org> [rth: Move link check outside of ifndef CONFIG_USER_ONLY; use ctx->privilege; nullify the insn earlier.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: ignore DIAG opcodeSven Schnelle
DIAG is usually only used by diagnostics software as it's CPU specific. In most of the cases it's better to ignore it and log a message that it's not implemented. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-7-svens@stackframe.org> [rth: Free the nullify condition.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-29 02:50:05 +0000