aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2022-02-09target/ppc: 6xx: Program exception cleanupFabiano Rosas
There's no ESR in the 6xx CPUs. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203200957.1434641-8-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: 6xx: External interrupt cleanupFabiano Rosas
There's no Hypervisor mode in the 6xx, so remove all LPES0 logic. Also remove BookE IRQ code. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203200957.1434641-7-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: 6xx: Machine Check exception cleanupFabiano Rosas
There's no MSR_HV in the 6xx CPUs. Also remove the 40x and BookE code. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203200957.1434641-6-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: 6xx: Critical exception cleanupFabiano Rosas
This only applies to the G2s, the other 6xx CPUs will not have this vector registered. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203200957.1434641-5-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: Simplify powerpc_excp_6xxFabiano Rosas
Differences from the generic powerpc_excp code: - Not BookE, so some MSR bits are cleared at interrupt dispatch; - No MSR_HV; - No power saving states; - No Hypervisor Emulation Assistance; - Not 64 bits; - No System call vectored; - No Alternate Interrupt Location. Exceptions used: POWERPC_EXCP_ALIGN POWERPC_EXCP_CRITICAL POWERPC_EXCP_DABR POWERPC_EXCP_DECR POWERPC_EXCP_DLTLB POWERPC_EXCP_DSI POWERPC_EXCP_DSTLB POWERPC_EXCP_DTLB POWERPC_EXCP_EXTERNAL POWERPC_EXCP_FPA POWERPC_EXCP_FPU POWERPC_EXCP_IABR POWERPC_EXCP_IFTLB POWERPC_EXCP_ISI POWERPC_EXCP_ITLB POWERPC_EXCP_MCHECK POWERPC_EXCP_MEXTBR POWERPC_EXCP_NMEXTBR POWERPC_EXCP_PROGRAM POWERPC_EXCP_RESET POWERPC_EXCP_SMI POWERPC_EXCP_SYSCALL POWERPC_EXCP_TRACE Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203200957.1434641-4-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: Introduce powerpc_excp_6xxFabiano Rosas
Introduce a new powerpc_excp function specific for PowerPC 6xx CPUs (603, 604, G2, MPC5xx, MCP8xx). This commit copies powerpc_excp_legacy verbatim so the next one has a clean diff. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203200957.1434641-3-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: Merge exception model IDs for 6xx CPUsFabiano Rosas
We don't need three separate exception model IDs for the 603, 604 and G2. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203200957.1434641-2-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: Remove PowerPC 601 CPUsCédric Le Goater
The PowerPC 601 processor is the first generation of processors to implement the PowerPC architecture. It was designed as a bridge processor and also could execute most of the instructions of the previous POWER architecture. It was found on the first Macs and IBM RS/6000 workstations. There is not much interest in keeping the CPU model of this POWER-PowerPC bridge processor. We have the 603 and 604 CPU models of the 60x family which implement the complete PowerPC instruction set. Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203142756.1302515-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: Fix radix loggingCédric Le Goater
ppc_radix64_partition_scoped_xlate() logs the host page protection bits variable but it is uninitialized. The value is set later on in ppc_radix64_check_prot(). Remove the output. Fixes: Coverity CID 1468942 Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20220203142145.1301749-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: booke: System Reset exception cleanupFabiano Rosas
There is no MSR_HV in BookE, so remove all of the HV logic. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-12-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: booke: Watchdog Timer interruptFabiano Rosas
Remove the switch as this function applies to BookE only. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-11-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: booke: System Call exception cleanupFabiano Rosas
QEMU does not support BookE as a hypervisor. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-10-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: booke: Alignment interrupt cleanupFabiano Rosas
BookE has no DSISR or DAR. The proper registers ESR and DEAR were already set at this point. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-9-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: booke: External interrupt cleanupFabiano Rosas
There is no LPES0 in BookE and no MSR_HV. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-8-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: booke: Instruction storage exception cleanupFabiano Rosas
The SRR1 should be set to the MSR value. There are no diagnostic bits in the SRR1 for BookE. Note that this fixes a bug where MSR_GS would be set and Linux would go into KVM code when there's no KVM guest. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-7-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: booke: Data Storage exception cleanupFabiano Rosas
There is no DSISR or DAR in BookE. Change to ESR and DEAR. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-6-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: booke: Machine Check cleanupsFabiano Rosas
There's no MSR_HV in BookE. Also remove 40x code. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-5-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: booke: Critical exception cleanupFabiano Rosas
Remove 40x and G2 code. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-4-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: Simplify powerpc_excp_bookeFabiano Rosas
Differences from the generic powerpc_excp code: - No MSR bits are cleared at interrupt dispatch; - No MSR_HV; - No power saving states; - No Hypervisor Emulation Assistance; - SPEU needs special handling; - Big endian only; - Both 64 and 32 bits; - No System call vectored; - No Alternate Interrupt Location. Exceptions used: POWERPC_EXCP_ALIGN POWERPC_EXCP_APU POWERPC_EXCP_CRITICAL POWERPC_EXCP_DEBUG POWERPC_EXCP_DECR POWERPC_EXCP_DSI POWERPC_EXCP_DTLB POWERPC_EXCP_EFPDI POWERPC_EXCP_EFPRI POWERPC_EXCP_EXTERNAL POWERPC_EXCP_FIT POWERPC_EXCP_FPU POWERPC_EXCP_ISI POWERPC_EXCP_ITLB POWERPC_EXCP_MCHECK POWERPC_EXCP_PROGRAM POWERPC_EXCP_RESET POWERPC_EXCP_SPEU POWERPC_EXCP_SYSCALL POWERPC_EXCP_WDT Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-3-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: Introduce powerpc_excp_bookeFabiano Rosas
Introduce a new powerpc_excp function specific for BookE CPUs. This commit copies powerpc_excp_legacy verbatim so the next one has a clean diff. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220128224018.1228062-2-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: Remove 440x4 CPUFabiano Rosas
This CPU was partially removed due to lack of support in 2017 by commit aef7796057 ("ppc: remove non implemented cpu models"). Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220128221611.1221715-1-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-08arm: force flag recalculation when messing with DAIFAlex Bennée
The recently introduced debug tests in kvm-unit-tests exposed an error in our handling of singlestep cause by stale hflags. This is caught by --enable-debug-tcg when running the tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reported-by: Andrew Jones <drjones@redhat.com> Tested-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220202122353.457084-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-08arm: tcg: Adhere to SMCCC 1.3 section 5.2Peter Maydell
The SMCCC 1.3 spec section 5.2 says The Unknown SMC Function Identifier is a sign-extended value of (-1) that is returned in the R0, W0 or X0 registers. An implementation must return this error code when it receives: * An SMC or HVC call with an unknown Function Identifier * An SMC or HVC call for a removed Function Identifier * An SMC64/HVC64 call from AArch32 state To comply with these statements, let's always return -1 when we encounter an unknown HVC or SMC call. [PMM: This is a reinstatement of commit 9fcd15b9193e819b, previously reverted in commit 4825eaae4fdd56fba0f; we can do this now that we have arranged for all the affected board models to not enable the PSCI emulation if they are running guest code at EL3. This avoids the regressions that caused us to revert the change for 7.0.] Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-08target/arm: make psci-conduit settable after realizePeter Maydell
We want to allow the psci-conduit property to be set after realize, because the parts of the code which are best placed to decide if it's OK to enable QEMU's builtin PSCI emulation (the board code and the arm_load_kernel() function are distant from the code which creates and realizes CPUs (typically inside an SoC object's init and realize method) and run afterwards. Since the DEFINE_PROP_* macros don't have support for creating properties which can be changed after realize, change the property to be created with object_property_add_uint32_ptr(), which is what we already use in this function for creating settable-after-realize properties like init-svtor and init-nsvtor. Note that it doesn't conceptually make sense to change the setting of the property after the machine has been completely initialized, beacuse this would mean that the behaviour of the machine when first started would differ from its behaviour when the system is subsequently reset. (It would also require the underlying state to be migrated, which we don't do.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20220127154639.2090164-2-peter.maydell@linaro.org
2022-02-08target/arm: Use CPTR_TFP with CPTR_EL3 in fp_exception_elRichard Henderson
Use the named bit rather than a bare extract32. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20220127063428.30212-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-08target/arm: Fix {fp, sve}_exception_el for VHE mode runningRichard Henderson
When HCR_EL2.E2H is set, the format of CPTR_EL2 changes to look more like CPACR_EL1, with ZEN and FPEN fields instead of TZ and TFP fields. Reported-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220127063428.30212-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-08target/arm: Tidy sve_exception_el for CPACR_EL1 accessRichard Henderson
Extract entire fields for ZEN and FPEN, rather than testing specific bits. This makes it easier to follow the code versus the ARM spec. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20220127063428.30212-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-08target/arm: Fix sve_zcr_len_for_el for VHE mode runningRichard Henderson
When HCR_EL2.{E2H,TGE} == '11', ZCR_EL1 is unused. Reported-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20220127063428.30212-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-02Merge remote-tracking branch ↵Peter Maydell
'remotes/hdeller/tags/hppa-updates-pull-request' into staging Fixes and updates for hppa target This patchset fixes some important bugs in the hppa artist graphics driver: - Fix artist graphics for HP-UX and Linux - Mouse cursor fixes for HP-UX - Fix draw_line() function on artist graphic and it adds new qemu features for hppa: - Allow up to 16 emulated CPUs (instead of 8) - Add support for an emulated TOC/NMI button A new Seabios-hppa firmware is included as well: - Update SeaBIOS-hppa to VERSION 3 - New opt/hostid fw_cfg option to change hostid - Add opt/console fw_cfg option to select default console - Added 16x32 font to STI firmware Signed-off-by: Helge Deller <deller@gmx.de> # gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT # gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F # gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown] # gpg: aka "Helge Deller <deller@kernel.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603 # Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F * remotes/hdeller/tags/hppa-updates-pull-request: hw/display/artist: Fix draw_line() artefacts hw/display/artist: Mouse cursor fixes for HP-UX hw/display/artist: rewrite vram access mode handling hppa: Add support for an emulated TOC/NMI button. hw/hppa: Allow up to 16 emulated CPUs seabios-hppa: Update SeaBIOS-hppa to VERSION 3 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-02hppa: Add support for an emulated TOC/NMI button.Helge Deller
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB in Linux. This patch adds support for such an emulated TOC button. It wires up the qemu monitor "nmi" command to trigger a TOC. For that it provides the hppa_nmi function which is assigned to the nmi_monitor_handler function pointer. When called it raises the EXCP_TOC hardware interrupt in the hppa_cpu_do_interrupt() function. The interrupt function then calls the architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address 0xf0000000). According to the PA-RISC PDC specification, the SeaBIOS firmware then writes the CPU registers into PIM (processor internal memmory) for later analysis. In order to write all registers it needs to know the contents of the CPU "shadow registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are provided by qemu in shadow registers when entering the SeaBIOS TOC function. This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which restores the original values of the shadow registers. With this opcode SeaBIOS can store those registers as well into PIM before calling an OS-provided TOC handler. To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the command "nmi". After the TOC started the OS-debugger, exit the qemu monitor with Ctrl-A C. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-31Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220130' into ↵Peter Maydell
staging ppc 7.0 queue: * Exception and TLB fixes for the 405 CPU (Fabiano and Cedric) * spapr fixes (Alexey and Daniel) * PowerNV PHB3/4 fixes (Frederic and Daniel) * PowerNV XIVE improvements (Cedric) * 603 CPUs fixes (Christophe) * Book-E exception fixes (Vitaly) * Misc compile issues (Philippe and Fabiano) * Exception model rework for the BookS CPUs (Fabiano) * Exception model rework for the 74xx CPUs (Fabiano) * Removal of 602 CPUs # gpg: Signature made Sun 30 Jan 2022 17:42:23 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-ppc-20220130: (41 commits) target/ppc: Remove support for the PowerPC 602 CPU target/ppc: 74xx: Set SRRs directly in exception code target/ppc: 74xx: System Reset interrupt cleanup target/ppc: 74xx: System Call exception cleanup target/ppc: 74xx: Program exception cleanup target/ppc: 74xx: External interrupt cleanup target/ppc: 74xx: Machine Check exception cleanup target/ppc: Simplify powerpc_excp_74xx target/ppc: Introduce powerpc_excp_74xx target/ppc: books: Program exception cleanup target/ppc: books: External interrupt cleanup target/ppc: books: Machine Check exception cleanup target/ppc: Simplify powerpc_excp_books target/ppc: Introduce powerpc_excp_books target/ppc: 405: Watchdog timer exception cleanup target/ppc: 405: Program exception cleanup target/ppc: 405: Instruction storage interrupt cleanup target/ppc: 405: Data Storage exception cleanup target/ppc: 405: Debug exception cleanup target/ppc: 405: Alignment exception cleanup ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-29Merge remote-tracking branch ↵Peter Maydell
'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging Migration Pull request (Take 2) Hi This time I have disabled vmstate canary patches form Dave Gilbert. Let's see if it works. Later, Juan. # gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT # gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full] # gpg: aka "Juan Quintela <quintela@trasno.org>" [full] # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits) migration: Move temp page setup and cleanup into separate functions migration: Simplify unqueue_page() migration: Add postcopy_has_request() migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat migration: No off-by-one for pss->page update in host page size migration: Tally pre-copy, downtime and post-copy bytes independently migration: Introduce ram_transferred_add() migration: Don't return for postcopy_send_discard_bm_ram() migration: Drop return code for disgard ram process migration: Do chunk page in postcopy_each_ram_send_discard() migration: Drop postcopy_chunk_hostpages() migration: Don't return for postcopy_chunk_hostpages() migration: Drop dead code of ram_debug_dump_bitmap() migration/ram: clean up unused comment. migration: Report the error returned when save_live_iterate fails migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished migration/migration.c: Avoid COLO boot in postcopy migration migration/migration.c: Add missed default error handler for migration state Remove unnecessary minimum_version_id_old fields multifd: Rename pages_used to normal_pages ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-28target/ppc: Remove support for the PowerPC 602 CPUCédric Le Goater
The 602 was derived from the PowerPC 603, for the gaming market it seems. It was hardly used and no firmware supporting the CPU could be found. Drop support. Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28Remove unnecessary minimum_version_id_old fieldsPeter Maydell
The migration code will not look at a VMStateDescription's minimum_version_id_old field unless that VMSD has set the load_state_old field to something non-NULL. (The purpose of minimum_version_id_old is to specify what migration version is needed for the code in the function pointed to by load_state_old to be able to handle it on incoming migration.) We have exactly one VMSD which still has a load_state_old, in the PPC CPU; every other VMSD which sets minimum_version_id_old is doing so unnecessarily. Delete all the unnecessary ones. Commit created with: sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old') with the one legitimate use then hand-edited back in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- It missed vmstate_ppc_cpu.
2022-01-28target/arm: Use correct entrypoint for SVC taken from Hyp to HypPeter Maydell
The exception caused by an SVC instruction may be taken to AArch32 Hyp mode for two reasons: * HCR.TGE indicates that exceptions from EL0 should trap to EL2 * we were already in Hyp mode The entrypoint in the vector table to be used differs in these two cases: for an exception routed to Hyp mode from EL0, we enter at the common 0x14 "hyp trap" entrypoint. For SVC from Hyp mode to Hyp mode, we enter at the 0x08 (svc/hvc trap) entrypoint. In the v8A Arm ARM pseudocode this is done in AArch32.TakeSVCException. QEMU incorrectly routed both of these exceptions to the 0x14 entrypoint. Correct the entrypoint for SVC from Hyp to Hyp by making use of the existing logic which handles "normal entrypoint for Hyp-to-Hyp, otherwise 0x14" for traps like UNDEF and data/prefetch aborts (reproduced here since it's outside the visible context in the diff for this commit): if (arm_current_el(env) != 2 && addr < 0x14) { addr = 0x14; } Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220117131953.3936137-1-peter.maydell@linaro.org
2022-01-28target/arm: Log CPU index in 'Taking exception' logPeter Maydell
In an SMP system it can be unclear which CPU is taking an exception; add the CPU index (which is the same value used in the TCG 'Trace %d:' logging) to the "Taking exception" log line to clarify it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220122182444.724087-2-peter.maydell@linaro.org
2022-01-28target/ppc: 74xx: Set SRRs directly in exception codeFabiano Rosas
The 74xx does not have alternate/hypervisor Save and Restore Registers, so we can set SRR0 and SRR1 directly. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220127201116.1154733-9-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: 74xx: System Reset interrupt cleanupFabiano Rosas
The whole power saving states logic seems to be dependent on HV mode, which don't exist for 74xx so I'm removing it all and leaving the abort message. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220127201116.1154733-8-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: 74xx: System Call exception cleanupFabiano Rosas
Remove the BookE code and add a comment explaining why we need to keep hypercall support even though this CPU does not have a hypervisor mode. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220127201116.1154733-7-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: 74xx: Program exception cleanupFabiano Rosas
Remove the BookE ESR setting. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220127201116.1154733-6-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: 74xx: External interrupt cleanupFabiano Rosas
The 74xx don't have MSR_HV so all the LPES0 logic can be removed. Also remove the BookE IRQ code. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220127201116.1154733-5-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: 74xx: Machine Check exception cleanupFabiano Rosas
The 74xx don't have an MSR_HV. Also remove 40x and BookE code. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220127201116.1154733-4-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: Simplify powerpc_excp_74xxFabiano Rosas
Differences from the generic powerpc_excp code: - Not BookE, so some MSR bits are cleared at interrupt dispatch; - No MSR_HV; - No power saving states; - No Hypervisor Emulation Assistance; - Not 64 bits; - No System call vectored; - No Alternate Interrupt Location. Exceptions used: POWERPC_EXCP_ALIGN POWERPC_EXCP_DECR POWERPC_EXCP_DSI POWERPC_EXCP_EXTERNAL POWERPC_EXCP_FPU POWERPC_EXCP_IABR POWERPC_EXCP_ISI POWERPC_EXCP_MCHECK POWERPC_EXCP_PERFM POWERPC_EXCP_PROGRAM POWERPC_EXCP_RESET POWERPC_EXCP_SMI POWERPC_EXCP_SYSCALL POWERPC_EXCP_THERM POWERPC_EXCP_TRACE POWERPC_EXCP_VPU POWERPC_EXCP_VPUA Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220127201116.1154733-3-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: Introduce powerpc_excp_74xxFabiano Rosas
Introduce a new powerpc_excp function specific for PowerPC 74xx CPUs. This commit copies powerpc_excp_legacy verbatim so the next one has a clean diff. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220127201116.1154733-2-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: books: Program exception cleanupFabiano Rosas
Remove setting of BookE registers. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220124184605.999353-6-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: books: External interrupt cleanupFabiano Rosas
Since this is now BookS only, we can simplify the code a bit and check has_hv_mode instead of enumerating the exception models. LPES0 does not make sense if there is no MSR_HV. Note that QEMU does not support HV mode on 970 and POWER5+ so we don't set MSR_HV in msr_mask. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220124184605.999353-5-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: books: Machine Check exception cleanupFabiano Rosas
powerpc_excp_books is BookS only, so remove 40x and BookE code. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220124184605.999353-4-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: Simplify powerpc_excp_booksFabiano Rosas
Differences from the generic powerpc_excp code: - Not BookE, so some MSR bits are cleared at interrupt dispatch; - Always uses HV_EMU if the CPU has MSR_HV; - Exceptions always delivered in 64 bit. Exceptions used: POWERPC_EXCP_ALIGN POWERPC_EXCP_DECR POWERPC_EXCP_DSEG POWERPC_EXCP_DSI POWERPC_EXCP_EXTERNAL POWERPC_EXCP_FPU POWERPC_EXCP_FU POWERPC_EXCP_HDECR POWERPC_EXCP_HDSI POWERPC_EXCP_HISI POWERPC_EXCP_HVIRT POWERPC_EXCP_HV_EMU POWERPC_EXCP_HV_FU POWERPC_EXCP_ISEG POWERPC_EXCP_ISI POWERPC_EXCP_MAINT POWERPC_EXCP_MCHECK POWERPC_EXCP_PERFM POWERPC_EXCP_PROGRAM POWERPC_EXCP_RESET POWERPC_EXCP_SDOOR_HV POWERPC_EXCP_SYSCALL POWERPC_EXCP_SYSCALL_VECTORED POWERPC_EXCP_THERM POWERPC_EXCP_TRACE POWERPC_EXCP_VPU POWERPC_EXCP_VPUA POWERPC_EXCP_VSXU POWERPC_EXCP_HV_MAINT POWERPC_EXCP_SDOOR (I added the two above that were not being considered. They used to be "Invalid exception". Now they become "Unimplemented exception" which is more accurate.) Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220124184605.999353-3-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: Introduce powerpc_excp_booksFabiano Rosas
Introduce a new powerpc_excp function specific for BookS CPUs. This commit copies powerpc_excp_legacy verbatim so the next one has a clean diff. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220124184605.999353-2-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28target/ppc: 405: Watchdog timer exception cleanupFabiano Rosas
Remove references to BookE. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220118184448.852996-15-farosas@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 11:08:49 +0000