aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2017-11-07translate.c: Fix usermode big-endian AArch32 LDREXD and STREXDPeter Maydell
For AArch32 LDREXD and STREXD, architecturally the 32-bit word at the lowest address is always Rt and the one at addr+4 is Rt2, even if the CPU is big-endian. Our implementation does these with a single 64-bit store, so if we're big-endian then we need to put the two 32-bit halves together in the opposite order to little-endian, so that they end up in the right places. We were trying to do this with the gen_aa32_frob64() function, but that is not correct for the usermode emulator, because there there is a distinction between "load a 64 bit value" (which does a BE 64-bit access and doesn't need swapping) and "load two 32 bit values as one 64 bit access" (where we still need to do the swapping, like system mode BE32). Fixes: https://bugs.launchpad.net/qemu/+bug/1725267 Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1509622400-13351-1-git-send-email-peter.maydell@linaro.org
2017-11-07arm: implement cache/shareability attribute bits for PAR registersAndrew Baumann
On a successful address translation instruction, PAR is supposed to contain cacheability and shareability attributes determined by the translation. We previously returned 0 for these bits (in line with the general strategy of ignoring caches and memory attributes), but some guest OSes may depend on them. This patch collects the attribute bits in the page-table walk, and updates PAR with the correct attributes for all LPAE translations. Short descriptor formats still return 0 for these bits, as in the prior implementation. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 20171031223830.4608-1-Andrew.Baumann@microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-31fix WFI/WFE length in syndrome registerStefano Stabellini
WFI/E are often, but not always, 4 bytes long. When they are, we need to set ARM_EL_IL_SHIFT in the syndrome register. Pass the instruction length to HELPER(wfi), use it to decrement pc appropriately and to pass an is_16bit flag to syn_wfx, which sets ARM_EL_IL_SHIFT if needed. Set dc->insn in both arm_tr_translate_insn and thumb_tr_translate_insn. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: alpine.DEB.2.10.1710241055160.574@sstabellini-ThinkPad-X260 [PMM: move setting of dc->insn for Thumb so it is correct for 32 bit insns] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-30Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20171030' into ↵Peter Maydell
staging s390x: fixups for 2.11 - missing \r in the BIOS console output - CPU type name is now "s390x-cpu" - fixup for the host-model on z14 and older machine versions # gpg: Signature made Mon 30 Oct 2017 08:34:15 GMT # gpg: using RSA key 0x117BBC80B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" # Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C * remotes/borntraeger/tags/s390x-20171030: s390-*.img: update s390 bios with latest fixes s390-ccw: print carriage return with new lines s390x/kvm: use cpu model for gscb on compat machines target/s390x: change CPU type name to "s390x-cpu" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-30Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging x86/cpu/numa queue, 2017-10-27 # gpg: Signature made Fri 27 Oct 2017 15:17:12 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: (39 commits) x86: Skip check apic_id_limit for Xen numa: fixup parsed NumaNodeOptions earlier mips: r4k: replace cpu_model with cpu_type mips: mipssim: replace cpu_model with cpu_type mips: Magnum/Acer Pica 61: replace cpu_model with cpu_type mips: fulong2e: replace cpu_model with cpu_type mips: malta/boston: replace cpu_model with cpu_type mips: use object_new() instead of gnew()+object_initialize() sparc: leon3: use generic cpu_model parsing sparc: sparc: use generic cpu_model parsing sparc: sun4u/sun4v/niagara: use generic cpu_model parsing sparc: cleanup cpu type name composition tricore: use generic cpu_model parsing tricore: cleanup cpu type name composition unicore32: use generic cpu_model parsing unicore32: cleanup cpu type name composition xtensa: lx60/lx200/ml605/kc705: use generic cpu_model parsing xtensa: sim: use generic cpu_model parsing xtensa: cleanup cpu type name composition sh4: remove SuperHCPUClass::name field ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-30s390x/kvm: use cpu model for gscb on compat machinesChristian Borntraeger
Starting a guest with <os> <type arch='s390x' machine='s390-ccw-virtio-2.9'>hvm</type> </os> <cpu mode='host-model'/> on an IBM z14 results in "qemu-system-s390x: Some features requested in the CPU model are not available in the configuration: gs" This is because guarded storage is fenced for compat machines that did not have guarded storage support. While this prevents future migration abort (by not starting the guest at all), not being able to start a "host-model" guest is very much unexpected. As it turns out, even if we would modify libvirt to not expand the cpu model to contain "gs" for compat machines, it cannot guarantee that a migration will succeed. For example if the kernel changes its features (or the user has nested=1 on one host but not on the other) the migration will fail nevertheless. So instead of fencing "gs" for machines <= 2.9 lets allow it for all machine types that support the CPU model. This will make "host-model" runnable all the time, while relying on the CPU model to reject invalid migration attempts. We also need to change the migration for guarded storage. Additional discussions about host-model are still pending but are out of scope of this patch. Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Cornelia Huck <Cornelia Huck <cohuck@redhat.com> Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
2017-10-30target/s390x: change CPU type name to "s390x-cpu"David Hildenbrand
For now, e.g. host-s390-cpu wasn't exposed to the user. cpu-add, -cpu and the CPU model qmp interfaces didn't care about the actual type, as that information was hidden. This changed with CPU hotplug via device_add. Now the type is visible to the user. Before we get that supported in a stable version, this is our last chance to change it. So change it from "s390-cpu" to "s390x-cpu", to match the architecture name. Example names are then e.g. z14-s390x-cpu or qemu-s390x-cpu. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20171020115803.14093-1-david@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-10-27mips: malta/boston: replace cpu_model with cpu_typeIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-37-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27sparc: cleanup cpu type name compositionIgor Mammedov
introduce SPARC_CPU_TYPE_NAME macro and use it to construct cpu type names. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-32-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27tricore: cleanup cpu type name compositionIgor Mammedov
introduce TRICORE_CPU_TYPE_NAME macro and use it to construct cpu type names. While at it move cpu type_infos into one array and register it directly with type_init_from_array() instead of custom tricore_cpu_register_types()/cpu_register() Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-30-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27unicore32: cleanup cpu type name compositionIgor Mammedov
use new UNICORE32_CPU_TYPE_NAME to compose CPU type name and get rid of intermediate UniCore32CPUInfo/uc32_cpu_register_types() which is replaced by static TypeInfo array and type_init_from_array() Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-28-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27xtensa: cleanup cpu type name compositionIgor Mammedov
use new XTENSA_CPU_TYPE_NAME to compose CPU type name to bring xtensa in line with all other targets that will similar macro. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-25-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27sh4: remove SuperHCPUClass::name fieldIgor Mammedov
the field contains upper-cased cpu model name and is used for printing supported cpu model names for '-cpu help'. Considering that cpu model lookup in superh_cpu_class_by_name() is case-insensitive, we can drop upper-casing when printing supported cpus list and use cpu type directly to do the same by cutting out SUPERH_CPU_TYPE_SUFFIX from typename. It allows to remove SuperHCPUClass::name, which practically duplicates names defined by TYPE_SH*_CPU definitions and simplify sh*_class_init()/SuperHCPUClass a bit. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-24-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27sh4: simplify superh_cpu_class_by_name()Igor Mammedov
currently for sh4 cpu_model argument for '-cpu' option could be either 'cpu model' name or cpu_typename. however typically '-cpu' takes 'cpu model' name and cpu type for sh4 target isn't advertised publicly ('-cpu help' prints only 'cpu model' names) so we shouldn't care about this use case (it's more of a bug). 1. Drop '-cpu cpu_typename' to align with the rest of targets. 2. Compose searched for typename from cpu model and use it with object_class_by_name() directly instead of over-complicated object_class_get_list() g_slist_find_custom() + superh_cpu_name_compare() With #1 droped, #2 could be used for both lookups which simplifies superh_cpu_class_by_name() quite a bit. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-23-git-send-email-imammedo@redhat.com> [ehabkost: Include fixup sent by Igor] Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27sh4: cleanup cpu type name compositionIgor Mammedov
introduce SUPERH_CPU_TYPE_NAME macro and use it to construct cpu type names. While at it move cpu type_infos into one array and register it directly with type_init_from_array() instead of custom superh_cpu_register_types() Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-22-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27openrisc: cleanup cpu type name compositionIgor Mammedov
use new OPENRISC_CPU_TYPE_NAME to compose CPU type name and get rid of intermediate OpenRISCCPUInfo/openrisc_cpu_register_types() which is replaced by static TypeInfo array. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-18-git-send-email-imammedo@redhat.com> Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27moxie: cleanup cpu type name compositionIgor Mammedov
introduce MOXIE_CPU_TYPE_NAME macro and consistently use it to construct cpu type names. While at it replace dynamic cpu type name composition with static data. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-16-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27moxie: fix qemu-system-moxie failing to start with CLI "-cpu MoxieLite"Igor Mammedov
It 'works' with default CPU only because of bug in moxie_cpu_class_by_name() where it treats cpu_model as type name and default cpu_model also happens to be type name. But specifying explicitly cpu on CLI, ex: '-cpu MoxieLite', makes QEMU fail since moxie_cpu_class_by_name() doesn't traslate cpu_model to cpu type and fails to find corresponding object class. Fix moxie_cpu_class_by_name() to do proper cpu_model -> cpu type translation and fix default cpu_model to be cpu_model instead of being typename. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-15-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27m68k: cleanup cpu type name compositionIgor Mammedov
use new M68K_CPU_TYPE_NAME to compose CPU type names and get rid of intermediate M68kCPUInfo/register_cpu_type() which is replaced by static TypeInfo array. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1507211474-188400-12-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27lm32: cleanup cpu type name compositionIgor Mammedov
introduce LM32_CPU_TYPE_NAME macro and consistently use it to construct cpu type names. While at it replace dynamic cpu type name composition with static data. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Michael Walle <michael@walle.cc> Message-Id: <1507211474-188400-9-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27cris: cleanup cpu type name compositionIgor Mammedov
replace ambiguous TYPE macro with a new CRIS_CPU_TYPE_NAME and use it consistently in the code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1507211474-188400-7-git-send-email-imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27alpha: cleanup cpu type name compositionIgor Mammedov
Introduce ALPHA_CPU_TYPE_NAME macro to replace rather ununique TYPE macro that alpha uses. With new macro it will follow the same naming convention as other targets. While at it put scattered TypeInfo into one array which places type desriptions at one place and reduces code a bit. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-5-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27Merge remote-tracking branch 'remotes/rth/tags/pull-dis-20171026' into stagingPeter Maydell
Capstone disassembler # gpg: Signature made Thu 26 Oct 2017 10:57:27 BST # gpg: using RSA key 0x64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-dis-20171026: disas: Add capstone as submodule disas: Remove monitor_disas_is_physical ppc: Support Capstone in disas_set_info arm: Support Capstone in disas_set_info i386: Support Capstone in disas_set_info disas: Support the Capstone disassembler library disas: Remove unused flags arguments target/arm: Don't set INSN_ARM_BE32 for CONFIG_USER_ONLY target/arm: Move BE32 disassembler fixup target/ppc: Convert to disas_set_info hook target/i386: Convert to disas_set_info hook Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # target/i386/cpu.c # target/ppc/translate_init.c
2017-10-26tcg: Avoid setting tcg_initialize if !CONFIG_TCGRichard Henderson
Fix the build for --disable-tcg. Fixes: 55c3ceef61fcf06fc98ddc752b7cce788ce7680b Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20171026135814.20773-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-25ppc: Support Capstone in disas_set_infoRichard Henderson
Cc: qemu-ppc@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25arm: Support Capstone in disas_set_infoRichard Henderson
Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25i386: Support Capstone in disas_set_infoRichard Henderson
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25disas: Remove unused flags argumentsRichard Henderson
Now that every target is using the disas_set_info hook, the flags argument is unused. Remove it. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25target/arm: Don't set INSN_ARM_BE32 for CONFIG_USER_ONLYRichard Henderson
This matches translator behaviour in arm_lduw_code. Fixes: https://bugs.launchpad.net/qemu/+bug/1724485 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25target/arm: Move BE32 disassembler fixupRichard Henderson
The Capstone disassembler has its own big-endian fixup. Doing this twice does not work, of course. Move our current fixup from target/arm/cpu.c to disas/arm.c. This makes read_memory_inner_func unused and can be removed. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25target/ppc: Convert to disas_set_info hookRichard Henderson
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25target/i386: Convert to disas_set_info hookRichard Henderson
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: Initialize cpu_env genericallyRichard Henderson
This is identical for each target. So, move the initialization to common code. Move the variable itself out of tcg_ctx and name it cpu_env to minimize changes within targets. This also means we can remove tcg_global_reg_new_{ptr,i32,i64}, since there are no longer global-register temps created by targets. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: define tcg_init_ctx and make tcg_ctx a pointerEmilio G. Cota
Groundwork for supporting multiple TCG contexts. The core of this patch is this change to tcg/tcg.h: > -extern TCGContext tcg_ctx; > +extern TCGContext tcg_init_ctx; > +extern TCGContext *tcg_ctx; Note that for now we set *tcg_ctx to whatever TCGContext is passed to tcg_context_init -- in this case &tcg_init_ctx. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24target/sparc: check CF_PARALLEL instead of parallel_cpusEmilio G. Cota
Thereby decoupling the resulting translated code from the current state of the system. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24target/sh4: check CF_PARALLEL instead of parallel_cpusEmilio G. Cota
Thereby decoupling the resulting translated code from the current state of the system. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24target/s390x: check CF_PARALLEL instead of parallel_cpusEmilio G. Cota
Thereby decoupling the resulting translated code from the current state of the system. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24target/m68k: check CF_PARALLEL instead of parallel_cpusEmilio G. Cota
Thereby decoupling the resulting translated code from the current state of the system. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24target/i386: check CF_PARALLEL instead of parallel_cpusEmilio G. Cota
Thereby decoupling the resulting translated code from the current state of the system. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24target/hppa: check CF_PARALLEL instead of parallel_cpusEmilio G. Cota
Thereby decoupling the resulting translated code from the current state of the system. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24target/arm: check CF_PARALLEL instead of parallel_cpusEmilio G. Cota
Thereby decoupling the resulting translated code from the current state of the system. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: convert tb->cflags reads to tb_cflags(tb)Emilio G. Cota
Convert all existing readers of tb->cflags to tb_cflags, so that we use atomic_read and therefore avoid undefined behaviour in C11. Note that the remaining setters/getters of the field are protected by tb_lock, and therefore do not need conversion. Luckily all readers access the field via 'tb->cflags' (so no foo.cflags, bar->cflags in the code base), which makes the conversion easily scriptable: FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \ accel/tcg/translator.c | cut -f1 -d':' | sort | uniq) perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES Then manually fixed the few errors that checkpatch reported. Compile-tested for all targets. Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24qom: Introduce CPUClass.tcg_initializeRichard Henderson
Move target cpu tcg initialization to common code, called from cpu_exec_realizefn. Acked-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: Remove TCGV_EQUAL*Richard Henderson
When we used structures for TCGv_*, we needed a macro in order to perform a comparison. Now that we use pointers, this is just clutter. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: Remove GET_TCGV_* and MAKE_TCGV_*Richard Henderson
The GET and MAKE functions weren't really specific enough. We now have a full complement of functions that convert exactly between temporaries, arguments, tcgv pointers, and indices. The target/sparc change is also a bug fix, which would have affected a host that defines TCG_TARGET_HAS_extr[lh]_i64_i32, i.e. MIPS64. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-21openrisc/cputimer: Perparation for MulticoreStafford Horne
In order to support multicore system we move some of the previously static state variables into the state of each core. On the other hand in order to allow timers to be synced between each code the ttcr (tick timer count register) is moved out of the core. This is not as per real hardware spec which has a separate timer counter per core, but it seems the most simple way to keep each clock in sync. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-10-21target/openrisc: Make coreid and numcores variableStafford Horne
Previously coreid and numcores were hard coded as 0 and 1 respectively as OpenRISC QEMU did not have multicore support. Multicore support is now being added so these registers need to have configured values. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-10-20s390x/tcg: low-address protection supportDavid Hildenbrand
This is a neat way to implement low address protection, whereby only the first 512 bytes of the first two pages (each 4096 bytes) of every address space are protected. Store a tec of 0 for the access exception, this is what is defined by Enhanced Suppression on Protection in case of a low address protection (Bit 61 set to 0, rest undefined). We have to make sure to to pass the access address, not the masked page address into mmu_translate*(). Drop the check from testblock. So we can properly test this via kvm-unit-tests. This will check every access going through one of the MMUs. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20171016202358.3633-3-david@redhat.com> [CH: restored error message for access register mode] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20s390x: refactor error handling for MSCH handlerHalil Pasic
Simplify the error handling of the MSCH. Let the code detecting the condition tell (in a less ambiguous way) how it's to be handled. No changes in behavior. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20171017140453.51099-8-pasic@linux.vnet.ibm.com> [CH: fix return code for fctl != 0] Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20s390x: refactor error handling for HSCH handlerHalil Pasic
Simplify the error handling of the HSCH. Let the code detecting the condition tell (in a less ambiguous way) how it's to be handled. No changes in behavior. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20171017140453.51099-7-pasic@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-31 06:31:50 +0000