aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2020-10-20target/arm: Implement FPSCR.LTPSIZE for M-profile LOB extensionPeter Maydell
If the M-profile low-overhead-branch extension is implemented, FPSCR bits [18:16] are a new field LTPSIZE. If MVE is not implemented (currently always true for us) then this field always reads as 4 and ignores writes. These bits used to be the vector-length field for the old short-vector extension, so we need to take care that they are not misinterpreted as setting vec_len. We do this with a rearrangement of the vfp_set_fpscr() code that deals with vec_len, vec_stride and also the QC bit; this obviates the need for the M-profile only masking step that we used to have at the start of the function. We provide a new field in CPUState for LTPSIZE, even though this will always be 4, in preparation for MVE, so we don't have to come back later and split it out of the vfp.xregs[FPSCR] value. (This state struct field will be saved and restored as part of the FPSCR value via the vmstate_fpscr in machine.c.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201019151301.2046-11-peter.maydell@linaro.org
2020-10-20target/arm: Allow M-profile CPUs with FP16 to set FPSCR.FP16Peter Maydell
M-profile CPUs with half-precision floating point support should be able to write to FPSCR.FZ16, but an M-profile specific masking of the value at the top of vfp_set_fpscr() currently prevents that. This is not yet an active bug because we have no M-profile FP16 CPUs, but needs to be fixed before we can add any. The bits that the masking is effectively preventing from being set are the A-profile only short-vector Len and Stride fields, plus the Neon QC bit. Rearrange the order of the function so that those fields are handled earlier and only under a suitable guard; this allows us to drop the M-profile specific masking, making FZ16 writeable. This change also makes the QC bit correctly RAZ/WI for older no-Neon A-profile cores. This refactoring also paves the way for the low-overhead-branch LTPSIZE field, which uses some of the bits that are used for A-profile Stride and Len. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201019151301.2046-10-peter.maydell@linaro.org
2020-10-20target/arm: Fix has_vfp/has_neon ID reg squashing for M-profilePeter Maydell
In arm_cpu_realizefn(), if the CPU has VFP or Neon disabled then we squash the ID register fields so that we don't advertise it to the guest. This code was written for A-profile and needs some tweaks to work correctly on M-profile: * A-profile only fields should not be zeroed on M-profile: - MVFR0.FPSHVEC,FPTRAP - MVFR1.SIMDLS,SIMDINT,SIMDSP,SIMDHP - MVFR2.SIMDMISC * M-profile only fields should be zeroed on M-profile: - MVFR1.FP16 In particular, because MVFR1.SIMDHP on A-profile is the same field as MVFR1.FP16 on M-profile this code was incorrectly disabling FP16 support on an M-profile CPU (where has_neon is always false). This isn't a visible bug yet because we don't have any M-profile CPUs with FP16 support, but the change is necessary before we introduce any. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201019151301.2046-9-peter.maydell@linaro.org
2020-10-20target/arm: Implement v8.1M low-overhead-loop instructionsPeter Maydell
v8.1M's "low-overhead-loop" extension has three instructions for looping: * DLS (start of a do-loop) * WLS (start of a while-loop) * LE (end of a loop) The loop-start instructions are both simple operations to start a loop whose iteration count (if any) is in LR. The loop-end instruction handles "decrement iteration count and jump back to loop start"; it also caches the information about the branch back to the start of the loop to improve performance of the branch on subsequent iterations. As with the branch-future instructions, the architecture permits an implementation to discard the LO_BRANCH_INFO cache at any time, and QEMU takes the IMPDEF option to never set it in the first place (equivalent to discarding it immediately), because for us a "real" implementation would be unnecessary complexity. (This implementation only provides the simple looping constructs; the vector extension MVE (Helium) adds some extra variants to handle looping across vectors. We'll add those later when we implement MVE.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201019151301.2046-8-peter.maydell@linaro.org
2020-10-20target/arm: Implement v8.1M branch-future insns (as NOPs)Peter Maydell
v8.1M implements a new 'branch future' feature, which is a set of instructions that request the CPU to perform a branch "in the future", when it reaches a particular execution address. In hardware, the expected implementation is that the information about the branch location and destination is cached and then acted upon when execution reaches the specified address. However the architecture permits an implementation to discard this cached information at any point, and so guest code must always include a normal branch insn at the branch point as a fallback. In particular, an implementation is specifically permitted to treat all BF insns as NOPs (which is equivalent to discarding the cached information immediately). For QEMU, implementing this caching of branch information would be complicated and would not improve the speed of execution at all, so we make the IMPDEF choice to implement all BF insns as NOPs. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201019151301.2046-7-peter.maydell@linaro.org
2020-10-20target/arm: Don't allow BLX imm for M-profilePeter Maydell
The BLX immediate insn in the Thumb encoding always performs a switch from Thumb to Arm state. This would be totally useless in M-profile which has no Arm decoder, and so the instruction does not exist at all there. Make the encoding UNDEF for M-profile. (This part of the encoding space is used for the branch-future and low-overhead-loop insns in v8.1M.) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201019151301.2046-6-peter.maydell@linaro.org
2020-10-20target/arm: Make the t32 insn[25:23]=111 group non-overlappingPeter Maydell
The t32 decode has a group which represents a set of insns which overlap with B_cond_thumb because they have [25:23]=111 (which is an invalid condition code field for the branch insn). This group is currently defined using the {} overlap-OK syntax, but it is almost entirely non-overlapping patterns. Switch it over to use a non-overlapping group. For this to be valid syntactically, CPS must move into the same overlapping-group as the hint insns (CPS vs hints was the only actual use of the overlap facility for the group). The non-overlapping subgroup for CLREX/DSB/DMB/ISB/SB is no longer necessary and so we can remove it (promoting those insns to be members of the parent group). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201019151301.2046-5-peter.maydell@linaro.org
2020-10-20target/arm: Implement v8.1M conditional-select insnsPeter Maydell
v8.1M brings four new insns to M-profile: * CSEL : Rd = cond ? Rn : Rm * CSINC : Rd = cond ? Rn : Rm+1 * CSINV : Rd = cond ? Rn : ~Rm * CSNEG : Rd = cond ? Rn : -Rm Implement these. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201019151301.2046-4-peter.maydell@linaro.org
2020-10-20target/arm: Implement v8.1M NOCP handlingPeter Maydell
From v8.1M, disabled-coprocessor handling changes slightly: * coprocessors 8, 9, 14 and 15 are also governed by the cp10 enable bit, like cp11 * an extra range of instruction patterns is considered to be inside the coprocessor space We previously marked these up with TODO comments; implement the correct behaviour. Unfortunately there is no ID register field which indicates this behaviour. We could in theory test an unrelated ID register which indicates guaranteed-to-be-in-v8.1M behaviour like ID_ISAR0.CmpBranch >= 3 (low-overhead-loops), but it seems better to simply define a new ARM_FEATURE_V8_1M feature flag and use it for this and other new-in-v8.1M behaviour that isn't identifiable from the ID registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201019151301.2046-3-peter.maydell@linaro.org
2020-10-20target/arm: Ignore HCR_EL2.ATA when {E2H,TGE} != 11Richard Henderson
Unlike many other bits in HCR_EL2, the description for this bit does not contain the phrase "if ... this field behaves as 0 for all purposes other than", so do not squash the bit in arm_hcr_el2_eff. Instead, replicate the E2H+TGE test in the two places that require it. Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Message-id: 20201008162155.161886-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-20target/arm: Fix reported EL for mte_check_failRichard Henderson
The reporting in AArch64.TagCheckFail only depends on PSTATE.EL, and not the AccType of the operation. There are two guest visible problems that affect LDTR and STTR because of this: (1) Selecting TCF0 vs TCF1 to decide on reporting, (2) Report "data abort same el" not "data abort lower el". Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Message-id: 20201008162155.161886-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-20target/arm: Remove redundant mmu_idx lookupRichard Henderson
We already have the full ARMMMUIdx as computed from the function parameter. For the purpose of regime_has_2_ranges, we can ignore any difference between AccType_Normal and AccType_Unpriv, which would be the only difference between the passed mmu_idx and arm_mmu_idx_el. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Message-id: 20201008162155.161886-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-20target/arm: Use tlb_flush_page_bits_by_mmuidx*Richard Henderson
When TBI is enabled in a given regime, 56 bits of the address are significant and we need to clear out any other matching virtual addresses with differing tags. The other uses of tlb_flush_page (without mmuidx) in this file are only used by aarch32 mode. Fixes: 38d931687fa1 Reported-by: Jordan Frank <jordanfrank@fb.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201016210754.818257-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-20target/arm: AArch32 VCVT fixed-point to float is always round-to-nearestPeter Maydell
For AArch32, unlike the VCVT of integer to float, which honours the rounding mode specified by the FPSCR, VCVT of fixed-point to float is always round-to-nearest. (AArch64 fixed-point-to-float conversions always honour the FPCR rounding mode.) Implement this by providing _round_to_nearest versions of the relevant helpers which set the rounding mode temporarily when making the call to the underlying softfloat function. We only need to change the VFP VCVT instructions, because the standard- FPSCR value used by the Neon VCVT is always set to round-to-nearest, so we don't need to do the extra work of saving and restoring the rounding mode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201013103532.13391-1-peter.maydell@linaro.org
2020-10-20target/arm: Fix SMLAD incorrect setting of Q bitPeter Maydell
The SMLAD instruction is supposed to: * signed multiply Rn[15:0] * Rm[15:0] * signed multiply Rn[31:16] * Rm[31:16] * perform a signed addition of the products and Ra * set Rd to the low 32 bits of the theoretical infinite-precision result * set the Q flag if the sign-extension of Rd would differ from the infinite-precision result (ie on overflow) Our current implementation doesn't quite do this, though: it performs an addition of the products setting Q on overflow, and then it adds Ra, again possibly setting Q. This sometimes incorrectly sets Q when the architecturally mandated only-check-for-overflow-once algorithm does not. For instance: r1 = 0x80008000; r2 = 0x80008000; r3 = 0xffffffff smlad r0, r1, r2, r3 This is (-32768 * -32768) + (-32768 * -32768) - 1 The products are both 0x4000_0000, so when added together as 32-bit signed numbers they overflow (and QEMU sets Q), but because the addition of Ra == -1 brings the total back down to 0x7fff_ffff there is no overflow for the complete operation and setting Q is incorrect. Fix this edge case by resorting to 64-bit arithmetic for the case where we need to add three values together. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201009144712.11187-1-peter.maydell@linaro.org
2020-10-19Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-next-20201017' ↵Peter Maydell
into staging MIPS patches queue . Fix some comment spelling errors . Demacro some TCG helpers . Add loongson-ext lswc2/lsdc2 group of instructions . Log unimplemented cache opcode . Increase number of TLB entries on the 34Kf core . Allow the CPU to use dynamic frequencies . Calculate the CP0 timer period using the CPU frequency . Set CPU frequency for each machine . Fix Malta FPGA I/O region size . Allow running qtests when ROM is missing . Add record/replay acceptance tests . Update MIPS CPU documentation . MAINTAINERS updates CI jobs results: https://gitlab.com/philmd/qemu/-/pipelines/203931842 https://travis-ci.org/github/philmd/qemu/builds/736491461 https://cirrus-ci.com/build/6272264062631936 https://app.shippable.com/github/philmd/qemu/runs/886/summary/console # gpg: Signature made Sat 17 Oct 2020 14:59:53 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/mips-next-20201017: (44 commits) target/mips: Increase number of TLB entries on the 34Kf core (16 -> 64) MAINTAINERS: Remove duplicated Malta test entries MAINTAINERS: Downgrade MIPS Boston to 'Odd Fixes', fix Paul Burton mail MAINTAINERS: Put myself forward for MIPS target MAINTAINERS: Remove myself docs/system: Update MIPS CPU documentation tests/acceptance: Add MIPS record/replay tests hw/mips: Remove exit(1) in case of missing ROM hw/mips: Rename TYPE_MIPS_BOSTON to TYPE_BOSTON hw/mips: Simplify code using ROUND_UP(INITRD_PAGE_SIZE) hw/mips: Simplify loading 64-bit ELF kernels hw/mips/malta: Use clearer qdev style hw/mips/malta: Move gt64120 related code together hw/mips/malta: Fix FPGA I/O region size target/mips/cpu: Display warning when CPU is used without input clock hw/mips/cps: Do not allow use without input clock hw/mips/malta: Set CPU frequency to 320 MHz hw/mips/boston: Set CPU frequency to 1 GHz hw/mips/cps: Expose input clock and connect it to CPU cores hw/mips/jazz: Correct CPU frequencies ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-17Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * Drop ninjatool and just require ninja (Paolo) * Fix docs build under msys2 (Yonggang) * HAX snafu fix (Claudio) * Disable signal handlers during fuzzing (Alex) * Miscellaneous fixes (Bruce, Greg) # gpg: Signature made Sat 17 Oct 2020 15:45:56 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (22 commits) ci: include configure and meson logs in all jobs if configure fails hax: unbreak accelerator cpu code after cpus.c split fuzz: Disable QEMU's SIG{INT,HUP,TERM} handlers cirrus: Enable doc build on msys2/mingw meson: Move the detection logic for sphinx to meson meson: move SPHINX_ARGS references within "if build_docs" docs: Fix Sphinx configuration for msys2/mingw meson: Only install icons and qemu.desktop if have_system configure: fix handling of --docdir parameter meson: cleanup curses/iconv test meson.build: don't condition iconv detection on library detection build: add --enable/--disable-libudev build: replace ninjatool with ninja build: cleanups to Makefile add ninja to dockerfiles, CI configurations and test VMs dockerfiles: enable Centos 8 PowerTools configure: move QEMU_INCLUDES to meson tests: add missing generated sources to testqapi make: run shell with pipefail tests/Makefile.include: unbreak non-tcg builds ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-17hax: unbreak accelerator cpu code after cpus.c splitClaudio Fontana
during my split of cpus.c, code line "current_cpu = cpu" was removed by mistake, causing hax to break. This commit fixes the situation restoring it. Reported-by: Volker Rümelin <vr_qemu@t-online.de> Fixes: e92558e4bf8059ce4f0b310afe218802b72766bc Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20201016080032.13914-1-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-17target/mips: Increase number of TLB entries on the 34Kf core (16 -> 64)Philippe Mathieu-Daudé
Per "MIPS32 34K Processor Core Family Software User's Manual, Revision 01.13" page 8 in "Joint TLB (JTLB)" section: "The JTLB is a fully associative TLB cache containing 16, 32, or 64-dual-entries mapping up to 128 virtual pages to their corresponding physical addresses." There is no particular reason to restrict the 34Kf core model to 16 TLB entries, so raise its config to 64. This is helpful for other projects, in particular the Yocto Project: Yocto Project uses qemu-system-mips 34Kf cpu model, to run 32bit MIPS CI loop. It was observed that in this case CI test execution time was almost twice longer than 64bit MIPS variant that runs under MIPS64R2-generic model. It was investigated and concluded that the difference in number of TLBs 16 in 34Kf case vs 64 in MIPS64R2-generic is responsible for most of CI real time execution difference. Because with 16 TLBs linux user-land trashes TLB more and it needs to execute more instructions in TLB refill handler calls, as result it runs much longer. (https://lists.gnu.org/archive/html/qemu-devel/2020-10/msg03428.html) Buglink: https://bugzilla.yoctoproject.org/show_bug.cgi?id=13992 Reported-by: Victor Kamensky <kamensky@cisco.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201016133317.553068-1-f4bug@amsat.org>
2020-10-17target/mips/cpu: Display warning when CPU is used without input clockPhilippe Mathieu-Daudé
All our QOM users provides an input clock. In order to avoid avoid future machines added without clock, display a warning. User-mode emulation use the CP0 timer with the RDHWR instruction (see commit cdfcad788394) so keep using the fixed 200 MHz clock without diplaying any warning. Only display it in system-mode emulation. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012095804.3335117-22-f4bug@amsat.org>
2020-10-17target/mips/cpu: Introduce mips_cpu_create_with_clock() helperPhilippe Mathieu-Daudé
Introduce an helper to create a MIPS CPU and connect it to a reference clock. This helper is not MIPS specific, but so far only MIPS CPUs need it. Suggested-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012095804.3335117-13-f4bug@amsat.org>
2020-10-17target/mips/cpu: Allow the CPU to use dynamic frequenciesPhilippe Mathieu-Daudé
Use the Clock API and let the CPU object have an input clock. If no clock is connected, keep using the default frequency of 200 MHz used since the introduction of the 'r4k' machine in commit 6af0bf9c7c3. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012095804.3335117-12-f4bug@amsat.org>
2020-10-17target/mips/cpu: Make cp0_count_rate a propertyPhilippe Mathieu-Daudé
Since not all CPU implementations use a cores use a CP0 timer at half the frequency of the CPU, make this variable a property. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012095804.3335117-11-f4bug@amsat.org>
2020-10-17target/mips/cpu: Calculate the CP0 timer period using the CPU frequencyPhilippe Mathieu-Daudé
The CP0 timer period is a function of the CPU frequency. Start using the default values, which will be replaced by properties in the next commits. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20201012095804.3335117-10-f4bug@amsat.org>
2020-10-17target/mips: Move cp0_count_ns to CPUMIPSStatePhilippe Mathieu-Daudé
Currently the CP0 timer period is fixed at 10 ns, corresponding to a fixed CPU frequency of 200 MHz (using half the speed of the CPU). In few commits we will be able to use a different CPU frequency. In preparation, move the cp0_count_ns variable to CPUMIPSState so we can modify it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20201012095804.3335117-9-f4bug@amsat.org>
2020-10-17target/mips/cp0_timer: Document TIMER_PERIOD originPhilippe Mathieu-Daudé
TIMER_PERIOD value of '10 ns' can be explained looking at commit 6af0bf9c7c3doc, where the CPU frequency is 200 MHz and CP0 default count rate is half the frequency of the CPU. Document that. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012095804.3335117-8-f4bug@amsat.org>
2020-10-17target/mips/cp0_timer: Explicit unit in variable namePhilippe Mathieu-Daudé
Name variables holding nanoseconds with the '_ns' suffix. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Message-Id: <20201012095804.3335117-7-f4bug@amsat.org>
2020-10-17target/mips: Move cpu_mips_get_random() with CP0 helpersPhilippe Mathieu-Daudé
The get_random() helper uses the CP0_Wired register, which is unrelated to the CP0_Count register used as timer. Commit e16fe40c872 ("Move the MIPS CPU timer in a separate file") incorrectly moved this get_random() helper with timer specific code. Move it back to generic CP0 helpers. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-Id: <20201012095804.3335117-6-f4bug@amsat.org>
2020-10-17target/mips/op_helper: Log unimplemented cache opcodePhilippe Mathieu-Daudé
In case the guest uses a cache opcode we are not expecting, log it to give us a chance to notice it, in case we should actually do something. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20200813181527.22551-4-f4bug@amsat.org>
2020-10-17target/mips/op_helper: Document Invalidate/Writeback opcodes as no-opPhilippe Mathieu-Daudé
QEMU does not model caches, so there is not much to do with the Invalidate/Writeback opcodes. Make it explicit adding a comment. Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20200813181527.22551-3-f4bug@amsat.org>
2020-10-17target/mips/op_helper: Convert multiple if() to switch casePhilippe Mathieu-Daudé
The cache operation is encoded in bits [20:18] of the instruction. The 'op' argument of helper_cache() contains the bits [20:16]. Extract the 3 bits and parse them using a switch case. This allow us to handle multiple cache types (the cache type is encoded in bits [17:16]). Previously the if() block was only checking the D-Cache (Primary Data or Unified Primary). Now we also handle the I-Cache (Primary Instruction), S-Cache (Secondary) and T-Cache (Terciary). Reported-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20200813181527.22551-2-f4bug@amsat.org>
2020-10-17target/mips: Add loongson-ext lsdc2 group of instructionsJiaxun Yang
LDC2/SDC2 opcodes have been rewritten as "load & store with offset" group of instructions by loongson-ext ASE. This patch add implementation of these instructions: gslbx: load 1 bytes to GPR gslhx: load 2 bytes to GPR gslwx: load 4 bytes to GPR gsldx: load 8 bytes to GPR gslwxc1: load 4 bytes to FPR gsldxc1: load 8 bytes to FPR gssbx: store 1 bytes from GPR gsshx: store 2 bytes from GPR gsswx: store 4 bytes from GPR gssdx: store 8 bytes from GPR gsswxc1: store 4 bytes from FPR gssdxc1: store 8 bytes from FPR Details of Loongson-EXT is here: https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1602831120-3377-5-git-send-email-chenhc@lemote.com>
2020-10-17target/mips: Add loongson-ext lswc2 group of instructions (Part 2)Jiaxun Yang
LWC2 & SWC2 have been rewritten by Loongson EXT vendor ASE as "load/store quad word" and "shifted load/store" groups of instructions. This patch add implementation of these instructions: gslwlc1: similar to lwl but RT is FPR instead of GPR gslwrc1: similar to lwr but RT is FPR instead of GPR gsldlc1: similar to ldl but RT is FPR instead of GPR gsldrc1: similar to ldr but RT is FPR instead of GPR gsswlc1: similar to swl but RT is FPR instead of GPR gsswrc1: similar to swr but RT is FPR instead of GPR gssdlc1: similar to sdl but RT is FPR instead of GPR gssdrc1: similar to sdr but RT is FPR instead of GPR Details of Loongson-EXT is here: https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Message-Id: <1602831120-3377-4-git-send-email-chenhc@lemote.com> [PMD: Reuse t1 on MIPS32, reintroduce t2/fp0] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-10-17target/mips: Add loongson-ext lswc2 group of instructions (Part 1)Jiaxun Yang
LWC2 & SWC2 have been rewritten by Loongson EXT vendor ASE as "load/store quad word" and "shifted load/store" groups of instructions. This patch add implementation of these instructions: gslq: load 16 bytes to GPR gssq: store 16 bytes from GPR gslqc1: load 16 bytes to FPR gssqc1: store 16 bytes from FPR Details of Loongson-EXT is here: https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Message-Id: <1602831120-3377-3-git-send-email-chenhc@lemote.com> [PMD: Restrict t1 variable to TARGET_MIPS64, remove unused t2/fp0] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-10-17target/mips: Demacro helpers for <MAX|MAXA|MIN|MINA>.<D|S>Aleksandar Markovic
Remove function definitions via macros to achieve better code clarity. Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1602103041-32017-4-git-send-email-aleksandar.qemu.devel@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-10-17target/mips: Demacro helpers for M<ADD|SUB>F.<D|S>Aleksandar Markovic
Remove function definitions via macros to achieve better code clarity. Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1602103041-32017-3-git-send-email-aleksandar.qemu.devel@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-10-17target/mips: Demacro helpers for <ABS|CHS>.<D|S|PS>Aleksandar Markovic
Remove function definitions via macros to achieve better code clarity. Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1602103041-32017-2-git-send-email-aleksandar.qemu.devel@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-10-17target/mips: Fix some comment spelling errorszhaolichang
There are many spelling errors in the comments in target/mips/. Use spellcheck to check the spelling errors. Signed-off-by: zhaolichang <zhaolichang@huawei.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201009064449.2336-7-zhaolichang@huawei.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-10-16Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' ↵Peter Maydell
into staging x86 queue, 2020-10-15 Cleanups: * Drop x86_cpu_get_supported_feature_word() forward declaration (Vitaly Kuznetsov) * Delete kvm_allows_irq0_override() (Eduardo Habkost) * Correct documentation of kvm_irqchip_*() (Eduardo Habkost) * Fix FEATURE_HYPERV_EDX value in hyperv_passthrough case (Zhenyu Wang) Deprecation: * CPU model deprecation API (Robert Hoo) * Mark Icelake-Client CPU models deprecated (Robert Hoo) Bug fixes: * Remove core_id assert check in CPUID 0x8000001E (Babu Moger) # gpg: Signature made Thu 15 Oct 2020 17:43:58 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-next-pull-request: i386: Mark Icelake-Client CPU models deprecated cpu: Introduce CPU model deprecation API kvm: Correct documentation of kvm_irqchip_*() i386/kvm: Delete kvm_allows_irq0_override() i386/kvm: Remove IRQ routing support checks i386/kvm: Require KVM_CAP_IRQ_ROUTING target/i386: Remove core_id assert check in CPUID 0x8000001E i386/kvm: fix FEATURE_HYPERV_EDX value in hyperv_passthrough case i386: drop x86_cpu_get_supported_feature_word() forward declaration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-14i386: Mark Icelake-Client CPU models deprecatedRobert Hoo
Icelake-Client CPU models will be removed in the future. Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Message-Id: <1600758855-80046-2-git-send-email-robert.hu@linux.intel.com> [ehabkost: reword deprecation note, fix version in doc] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-14cpu: Introduce CPU model deprecation APIRobert Hoo
Implement the ability of marking some versions deprecated. When that CPU model is chosen, print a warning. The warning message can be customized, e.g. suggesting an alternative CPU model to be used instead. The deprecation message will be printed by x86_cpu_list_entry(), e.g. '-cpu help'. QMP command 'query-cpu-definitions' will return a bool value indicating the deprecation status. Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Message-Id: <1600758855-80046-1-git-send-email-robert.hu@linux.intel.com> [ehabkost: reword commit message] [ehabkost: Handle NULL cpu_type] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-14i386/kvm: Delete kvm_allows_irq0_override()Eduardo Habkost
As IRQ routing is always available on x86, kvm_allows_irq0_override() will always return true, so we don't need the function anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200922201922.2153598-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-14i386/kvm: Remove IRQ routing support checksEduardo Habkost
KVM_CAP_IRQ_ROUTING is always available on x86, so replace checks for kvm_has_gsi_routing() and KVM_CAP_IRQ_ROUTING with asserts. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200922201922.2153598-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-14i386/kvm: Require KVM_CAP_IRQ_ROUTINGEduardo Habkost
KVM_CAP_IRQ_ROUTING is available since 2009 (Linux v2.6.30), so it's safe to just make it a requirement on x86. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200922201922.2153598-2-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-14target/i386: Remove core_id assert check in CPUID 0x8000001EBabu Moger
With x2apic enabled, configurations can have more that 255 cores. Noticed the device add test is hitting an assert when during cpu hotplug with core_id > 255. This is due to assert check in the CPUID 0x8000001E. Remove the assert check and fix the problem. Fixes the bug: Link: https://bugzilla.redhat.com/show_bug.cgi?id=1834200 Signed-off-by: Babu Moger <babu.moger@amd.com> Message-Id: <160072824160.9666.8890355282135970684.stgit@naples-babu.amd.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-14i386/kvm: fix FEATURE_HYPERV_EDX value in hyperv_passthrough caseZhenyu Wang
Fix typo to use correct edx value for FEATURE_HYPERV_EDX when hyperv_passthrough is enabled. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Message-Id: <20190820103030.12515-1-zhenyuw@linux.intel.com> Fixes: e48ddcc6ce13 ("i386/kvm: implement 'hv-passthrough' mode") Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-14i386: drop x86_cpu_get_supported_feature_word() forward declarationVitaly Kuznetsov
We only use x86_cpu_get_supported_feature_word() after its implementation, no forward declaration needed. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200904145431.196885-3-vkuznets@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-13i386: Register most CPU properties as class propertiesEduardo Habkost
Class properties make QOM introspection simpler and easier, as they don't require an object to be instantiated. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200921221045.699690-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-13target/sparc/int32_helper: Remove duplicated 'Tag Overflow' entryPhilippe Mathieu-Daudé
Commit 0b09be2b2f ("Nicer debug output for exceptions") added twice the same "Tag Overflow" entry, remove the extra one. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20201011200112.3222822-1-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-12target/i386/cpu: Update comment that mentions TexinfoMarkus Armbruster
Missed in commit 41fba1618b "docs/system: convert the documentation of deprecated features to rST." Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200929075824.1517969-3-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 23:04:30 +0000