aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2019-09-23s390x/tcg: MVCOS: Lengths are 32 bit in 24/31-bit modeDavid Hildenbrand
Triggered by a review comment from Richard, also MVCOS has a 32-bit length in 24/31-bit addressing mode. Add a new helper. Rename wrap_length() to wrap_length31(). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: MVCS/MVCP: Check for special operation exceptionsDavid Hildenbrand
Let's perform the documented checks. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: MVCLU/MVCLE: Process max 4k bytes at a timeDavid Hildenbrand
Let's stay within single pages. ... and indicate cc=3 in case there is work remaining. Keep unicode padding simple. While reworking, properly wrap the addresses. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: MVPG: Properly wrap the addressesDavid Hildenbrand
We have to mask of any unused bits. While at it, document what exactly is missing. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: MVPG: Check for specification exceptionsDavid Hildenbrand
Perform the checks documented in the PoP. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: MVC: Use is_destructive_overlap()David Hildenbrand
Let's use the new helper, that also detects destructive overlaps when wrapping. We'll make the remaining code (e.g., fast_memmove()) aware of wrapping later. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: MVC: Increment the length onceDavid Hildenbrand
Let's increment the length once. While at it, cleanup the comment. The memset() example is given as a programming note in the PoP, so drop the description. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: MVCL: Process max 4k bytes at a timeDavid Hildenbrand
Process max 4k bytes at a time, writing back registers between the accesses. The instruction is interruptible. "For operands longer than 2K bytes, access exceptions are not recognized for locations more than 2K bytes beyond the current location being processed." Note that on z/Architecture, 2k vs. 4k access cannot get differentiated as long as pages are not crossed. This seems to be a leftover from ESA/390. Simply stay within single pages. MVCL handling is quite different than MVCLE/MVCLU handling, so split up the handlers. Defer interrupt handling, as that will require more thought, add a TODO for that. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: MVCL: Detect destructive overlapsDavid Hildenbrand
We'll have to zero-out unused bit positions, so make sure to write the addresses back. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: MVCL: Zero out unused bits of addressDavid Hildenbrand
We have to zero out unused bits in 24 and 31-bit addressing mode. Provide a new helper. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/tcg: Reset exception_index to -1 instead of 0David Hildenbrand
We use the marker "-1" for "no exception". s390_cpu_do_interrupt() might get confused by that. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23s390x/cpumodel: Add the z15 name to the description of gen15aChristian Borntraeger
We now know that gen15a is called z15. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-09-23s390x/kvm: Officially require at least kernel 3.15Thomas Huth
Since QEMU v2.10, the KVM acceleration does not work on older kernels anymore since the code accidentally requires the KVM_CAP_DEVICE_CTRL capability now - it should have been optional instead. Instead of fixing the bug, we asked in the ChangeLog of QEMU 2.11 - 3.0 that people should speak up if they still need support of QEMU running with KVM on older kernels, but seems like nobody really complained. Thus let's make this official now and turn it into a proper error message, telling the users to use at least kernel 3.15 now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190913091443.27565-1-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-09-20Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-pull-request' into staging Trivial patches 20190919 # gpg: Signature made Thu 19 Sep 2019 14:50:55 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: configure: Add xkbcommon configure options kvm: Fix typo in header of kvm_device_access() Fix cacheline detection on FreeBSD/powerpc. build: Don't ignore qapi-visit-core.c target/m68k/fpu_helper.c: rename the access arguments Replace '-machine accel=xyz' with '-accel xyz' cutils: Move size_to_str() from "qemu-common.h" to "qemu/cutils.h" vfio: fix a typo Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-19target/m68k/fpu_helper.c: rename the access argumentsKONRAD Frederic
The "access" arguments clash with a macro under Windows with MinGW: CC m68k-softmmu/target/m68k/fpu_helper.o target/m68k/fpu_helper.c: In function 'fmovem_predec': target/m68k/fpu_helper.c:405:56: error: macro "access" passed 4 arguments, but takes just 2 size = access(env, addr, &env->fregs[i], ra); So this renames them access_fn. Tested with: ./configure --target-list=m68k-softmmu make -j8 Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1568296920-29939-1-git-send-email-frederic.konrad@adacore.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-09-17gdbstub: riscv: fix the fflags registersKONRAD Frederic
While debugging an application with GDB the following might happen: (gdb) return Make xxx return now? (y or n) y Could not fetch register "fflags"; remote failure reply 'E14' This is because riscv_gdb_get_fpu calls riscv_csrrw_debug with a wrong csr number (8). It should use the csr_register_map in order to reach the riscv_cpu_get_fflags callback. Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17target/riscv: Use TB_FLAGS_MSTATUS_FS for floating pointAlistair Francis
Use the TB_FLAGS_MSTATUS_FS macro when enabling floating point in the tb flags. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17target/riscv: Fix mstatus dirty maskAlistair Francis
This is meant to mask off the hypervisor bits, but a typo caused it to mask MPP instead. Fixes: 1f0419cb04 ("target/riscv: Allow setting mstatus virtulisation bits") Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17target/riscv: Use both register name and ABI nameAtish Patra
Use both the generic register name and ABI name for the general purpose registers and floating point registers. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hmp: Add a command to show virtual memory mappingsBin Meng
This adds 'info mem' command for RISC-V, to show virtual memory mappings that aids debugging. Rather than showing every valid PTE, the command compacts the output by merging all contiguous physical address mappings into one block and only shows the merged block mapping details. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: rv32: Root page table address can be larger than 32-bitBin Meng
For RV32, the root page table's PPN has 22 bits hence its address bits could be larger than the maximum bits that target_ulong is able to represent. Use hwaddr instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17target/riscv: Update the Hypervisor CSRs to v0.4Alistair Francis
Update the Hypervisor CSR addresses to match the v0.4 spec. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17target/riscv: Create function to test if FP is enabledAlistair Francis
Let's create a function that tests if floating point support is enabled. We can then protect all floating point operations based on if they are enabled. This patch so far doesn't change anything, it's just preparing for the Hypervisor support for floating point operations. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Christophe de Dinechin <dinechin@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17target/riscv/pmp: Convert qemu_log_mask(LOG_TRACE) to trace eventsPhilippe Mathieu-Daudé
Use the always-compiled trace events, remove the now unused RISCV_DEBUG_PMP definition. Note pmpaddr_csr_read() could previously do out-of-bound accesses passing addr_index >= MAX_RISCV_PMPS. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17target/riscv/pmp: Restrict priviledged PMP to system-mode emulationPhilippe Mathieu-Daudé
The RISC-V Physical Memory Protection is restricted to privileged modes. Restrict its compilation to QEMU system builds. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17target/sparc: Switch to do_transaction_failed() hookPeter Maydell
Switch the SPARC target from the old unassigned_access hook to the new do_transaction_failed hook. This will cause the "if transaction failed" code paths added in the previous commits to become active if the access is to an unassigned address. In particular we'll now handle bus errors during page table walks correctly (generating a translation error with the right kind of fault status). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-8-peter.maydell@linaro.org
2019-09-17target/sparc: Remove unused ldl_phys from dump_mmu()Peter Maydell
The dump_mmu() function does a ldl_phys() at the start, but then never uses the value it loads at all. Remove the unused code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-7-peter.maydell@linaro.org
2019-09-17target/sparc: Handle bus errors in mmu_probe()Peter Maydell
Convert the mmu_probe() function to using address_space_ldl() rather than ldl_phys(), so we can explicitly detect memory transaction failures. This makes no practical difference at the moment, because ldl_phys() will return 0 on a transaction failure, and we treat transaction failures and 0 PDEs identically. However the spec says that MMU probe operations are supposed to update the fault status registers, and if we ever implement that we'll want to distinguish the difference. For the moment, just add a TODO comment about the bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-6-peter.maydell@linaro.org
2019-09-17target/sparc: Correctly handle bus errors in page table walksPeter Maydell
Currently we use the ldl_phys() function to read page table entries. With the unassigned_access hook in place, if these hit an unassigned area of memory then the hook will cause us to wrongly generate an exception with a fault address matching the address of the page table entry. Change to using address_space_ldl() so we can detect and correctly handle bus errors and give them their correct behaviour of causing a translation error with a suitable fault status register. Note that this won't actually take effect until we switch the over to using the do_translation_failed hook. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-5-peter.maydell@linaro.org
2019-09-17target/sparc: Check for transaction failures in MXCC stream ASI accessesPeter Maydell
Currently the ld/st_asi helper functions make calls to the ld*_phys() and st*_phys() functions for those ASIs which imply direct accesses to physical addresses. These implicitly rely on the unassigned_access hook to cause them to generate an MMU fault if the access fails. Switch to using the address_space_* functions instead, which return a MemTxResult that we can check. This means that when we switch SPARC over to using the do_transaction_failed hook we'll still get the same MMU faults we did before. This commit converts the ASIs which do MXCC stream source and destination accesses. It's not clear to me whether raising an MMU fault like this is the correct behaviour if we encounter a bus error, but we retain the same behaviour that the old unassigned_access hook would implement. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-4-peter.maydell@linaro.org
2019-09-17target/sparc: Check for transaction failures in MMU passthrough ASIsPeter Maydell
Currently the ld/st_asi helper functions make calls to the ld*_phys() and st*_phys() functions for those ASIs which imply direct accesses to physical addresses. These implicitly rely on the unassigned_access hook to cause them to generate an MMU fault if the access fails. Switch to using the address_space_* functions instead, which return a MemTxResult that we can check. This means that when we switch SPARC over to using the do_transaction_failed hook we'll still get the same MMU faults we did before. This commit converts the ASIs which do "MMU passthrough". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-3-peter.maydell@linaro.org
2019-09-17target/sparc: Factor out the body of sparc_cpu_unassigned_access()Peter Maydell
Currently the SPARC target uses the old-style do_unassigned_access hook. We want to switch it over to do_transaction_failed, but to do this we must first remove all the direct calls in ldst_helper.c to cpu_unassigned_access(). Factor out the body of the hook function's code into a new sparc_raise_mmu_fault() and call it from the hook and from the various places that used to call cpu_unassigned_access(). In passing, this fixes a bug where the code that raised the MMU exception was directly calling GETPC() from a function that was several levels deep in the callstack from the original helper function: the new sparc_raise_mmu_fault() instead takes the return address as an argument. Other than the use of retaddr rather than GETPC() and a comment format fixup, the body of the new function has no changes from that of the old hook function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-2-peter.maydell@linaro.org
2019-09-17Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Fix Patchew CI failures (myself) * i386 fw_cfg refactoring (Philippe) * pmem bugfix (Stefan) * Support for accessing cstate MSRs (Wanpeng) * exec.c cleanups (Wei Yang) * Improved throttling (Yury) * elf-ops.h coverity fix (Stefano) # gpg: Signature made Mon 16 Sep 2019 16:13:12 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (29 commits) hw/i386/pc: Extract the x86 generic fw_cfg code hw/i386/pc: Rename pc_build_feature_control() as generic fw_cfg_build_* hw/i386/pc: Let pc_build_feature_control() take a MachineState argument hw/i386/pc: Let pc_build_feature_control() take a FWCfgState argument hw/i386/pc: Rename pc_build_smbios() as generic fw_cfg_build_smbios() hw/i386/pc: Let pc_build_smbios() take a generic MachineState argument hw/i386/pc: Let pc_build_smbios() take a FWCfgState argument hw/i386/pc: Replace PCMachineState argument with MachineState in fw_cfg_arch_create hw/i386/pc: Pass the CPUArchIdList array by argument hw/i386/pc: Pass the apic_id_limit value by argument hw/i386/pc: Pass the boot_cpus value by argument hw/i386/pc: Rename bochs_bios_init as more generic fw_cfg_arch_create hw/i386/pc: Use address_space_memory in place hw/i386/pc: Extract e820 memory layout code hw/i386/pc: Use e820_get_num_entries() to access e820_entries cpus: Fix throttling during vm_stop qemu-thread: Add qemu_cond_timedwait memory: inline and optimize devend_memop memory: fetch pmem size in get_file_size() elf-ops.h: fix int overflow in load_elf() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-16hw/i386/pc: Extract e820 memory layout codePhilippe Mathieu-Daudé
Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16Merge remote-tracking branch 'remotes/rth/tags/pull-hppa-20190915' into stagingPeter Maydell
Two temp live across branch fixes. # gpg: Signature made Sun 15 Sep 2019 14:48:06 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-hppa-20190915: target/hppa: prevent trashing of temporary in do_depw_sar() target/hppa: prevent trashing of temporary in trans_mtctl() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-16i386/kvm: support guest access CORE cstateWanpeng Li
Allow guest reads CORE cstate when exposing host CPU power management capabilities to the guest. PKG cstate is restricted to avoid a guest to get the whole package information in multi-tenant scenario. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1563154124-18579-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-14target/hppa: prevent trashing of temporary in do_depw_sar()Sven Schnelle
nullify_over() calls brcond which destroys all temporaries. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190913101714.29019-3-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-14target/hppa: prevent trashing of temporary in trans_mtctl()Sven Schnelle
nullify_over() calls brcond which destroys all temporaries. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190913101714.29019-2-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-13Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-sep-12-2019' ↵Peter Maydell
into staging MIPS queue for September 12th, 2019 # gpg: Signature made Thu 12 Sep 2019 17:26:10 BST # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-sep-12-2019: target/mips: gdbstub: Revert commit 8e0b373 hw/mips/mips_jazz: Remove no-longer-necessary override of do_unassigned_access target/mips: Switch to do_transaction_failed() hook hw/mips/mips_jazz: Override do_transaction_failed hook Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-12target/mips: gdbstub: Revert commit 8e0b373Libo Zhou
Multiple reports from users were received regarding failures of packet 'g' communication with gdb for some MIPS configurations. It was found out (by bisecting) that the problematic commit is 8e0b373. Revert that commit until a better solution is developed. Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Libo Zhou <zhlb29@foxmail.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1568207966-25202-1-git-send-email-aleksandar.markovic@rt-rk.com>
2019-09-12target/mips: Switch to do_transaction_failed() hookPeter Maydell
Switch the MIPS target from the old unassigned_access hook to the new do_transaction_failed hook. Unlike the old hook, do_transaction_failed is only ever called from the TCG memory access paths, so there is no need for the "ignore this if we're using KVM" hack that we were previously using to work around the way unassigned_access was called for all kinds of memory accesses to unassigned physical addresses. The MIPS target does not ever do direct memory reads by physical address (via either ldl_phys etc or address_space_ldl etc), so the only memory accesses this affects are the 'normal' guest loads and stores, which will be handled by the new hook; their behaviour is unchanged. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20190802160458.25681-3-peter.maydell@linaro.org>
2019-09-11target/xtensa: linux-user: add call0 ABI supportMax Filippov
Xtensa binaries built for call0 ABI don't rotate register window on function calls and returns. Invocation of signal handlers from the kernel is therefore different in windowed and call0 ABIs. There's currently no way to determine xtensa ELF binary ABI from the binary itself. Add handler for the -xtensa-abi-call0 command line parameter/QEMU_XTENSA_ABI_CALL0 envitonment variable to the qemu-user and record ABI choice. Use it to initialize PS.WOE in xtensa_cpu_reset. Check PS.WOE in setup_rt_frame to determine how a signal should be delivered. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20190906165713.5558-1-jcmvbkbc@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-09-05target/arm: Inline gen_bx_im into callersRichard Henderson
There are only two remaining uses of gen_bx_im. In each case, we know the destination mode -- not changing in the case of gen_jmp or changing in the case of trans_BLX_i. Use this to simplify the surrounding code. For trans_BLX_i, use gen_jmp for the actual branch. For gen_jmp, use gen_set_pc_im to set up the single-step. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-70-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Clean up disas_thumb_insnRichard Henderson
Now that everything is converted, remove the rest of the legacy decode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-69-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, long branchesRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-68-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, Unconditional branchRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-67-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, load (literal)Richard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-66-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, shift immediateRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-65-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, Miscellaneous 16-bit instructionsRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-64-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, Conditional branches, Supervisor callRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-63-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 11:08:40 +0000