aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2019-05-17s390x/tcg: Implement VECTOR NORDavid Hildenbrand
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR NANDDavid Hildenbrand
Part of vector enhancements facility 1, but easy to implement. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR MULTIPLY *David Hildenbrand
Yet another set of variants. Implement it similar to VECTOR MULTIPLY AND ADD *. At least for one variant we have a gvec helper we can reuse. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR MULTIPLY AND ADD *David Hildenbrand
Quite some variants to handle. At least handle some 32-bit element variants via gvec expansion (we could also handle 16/32-bit variants for ODD and EVEN easily via gvec expansion, but let's keep it simple for now). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR (MAXIMUM|MINIMUM) (LOGICAL)David Hildenbrand
Luckily, we already have gvec helpers for all four cases. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR LOAD POSITIVEDavid Hildenbrand
Similar to VECTOR LOAD COMPLEMENT. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR LOAD COMPLEMENTDavid Hildenbrand
We can reuse an existing gvec helper for negating the values. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR GALOIS FIELD MULTIPLY SUM (AND ACCUMULATE)David Hildenbrand
A galois field multiplication in field 2 is like binary multiplication, however instead of doing ordinary binary additions, xor's are performed. So no carries are considered. Implement all variants via helpers. s390_vec_sar() and s390_vec_shr() will be reused later on. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR EXCLUSIVE ORDavid Hildenbrand
Easy, we can reuse an existing gvec helper. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR COUNT TRAILING ZEROSDavid Hildenbrand
Implement it similar to VECTOR COUNT LEADING ZEROS. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR COUNT LEADING ZEROSDavid Hildenbrand
For 8/16, use the 32 bit variant and properly subtract the added leading zero bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR COMPARE *David Hildenbrand
To carry out the comparison, we can reuse the existing gvec comparison function. In case the CC is to be computed, save the result vector and compute the CC lazily. The result is a vector consisting of all 1's for elements that matched and 0's for elements that didn't match. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR ELEMENT COMPARE *David Hildenbrand
Fairly easy to implement, we can make use of the existing CC helpers cmps64 and cmpu64 - we siply have to sign extend the elements. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR CHECKSUMDavid Hildenbrand
Time to introduce read_vec_element_i32 and write_vec_element_i32. Take proper care of properly adding the carry. We can perform both additions including the carry via tcg_gen_add2_i32(). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR AVERAGE LOGICALDavid Hildenbrand
Similar to VECTOR AVERAGE but without sign extension. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR AVERAGEDavid Hildenbrand
Handle 32/64-bit elements via gvec expansion and the 8/16 bits via ool helpers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR AND (WITH COMPLEMENT)David Hildenbrand
Easy, as we can reuse existing gvec helpers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR ADD WITH CARRY COMPUTE CARRYDavid Hildenbrand
Similar to VECTOR ADD COMPUTE CARRY, however 128-bit handling only. Courtesy of Richard H. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR ADD WITH CARRYDavid Hildenbrand
Only slightly ugly, perform two additions. At least it is only supported for 128 bit elements. Introduce gen_gvec128_4_i64() similar to gen_gvec128_3_i64(). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR ADD COMPUTE CARRYDavid Hildenbrand
128-bit handling courtesy of Richard H. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17s390x/tcg: Implement VECTOR ADDDavid Hildenbrand
Introduce two types of fancy new helpers that will be reused a couple of times 1. gen_gvec_fn_3: Call an existing tcg_gen_gvec_X function with 3 parameters, simplifying parameter passing 2. gen_gvec128_3_i64: Call a function that performs 128 bit calculations using two 64 bit values per vector. Luckily, for VECTOR ADD we already have everything we need. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-17hvf: Add missing break statementChen Zhang
In target/i386/hvf/hvf.c, a break statement was probably missing in `hvf_vcpu_exec()`, in handling EXIT_REASON_HLT. These lines seemed to be equivalent to `kvm_handle_halt()`. Signed-off-by: Chen Zhang <tgfbeta@me.com> Message-Id: <087F1D9C-109D-41D1-BE2C-CE5D840C981B@me.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-17target/m68k: Optimize rotate_x() using extract_i32()Philippe Mathieu-Daudé
Optimize rotate_x() using tcg_gen_extract_i32(). We can now free the 'sz' tcg_temp earlier. Since it is allocated with tcg_const_i32(), free it with tcg_temp_free_i32(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190310003428.11723-6-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-17target/m68k: Fix a tcg_temp leakPhilippe Mathieu-Daudé
The function gen_get_ccr() returns a tcg_temp created with tcg_temp_new(). Free it with tcg_temp_free(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190310003428.11723-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-17target/m68k: Reduce the l1 TCGLabel scopePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190310003428.11723-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-16target/m68k: Switch to transaction_failed hookPeter Maydell
Switch the m68k target from the old unassigned_access hook to the transaction_failed hook. The notable difference is that rather than it being called for all physical memory accesses which fail (including those made by DMA devices or by the gdbstub), it is only called for those made by the CPU via its MMU. (In previous commits we put in explicit checks for the direct physical loads made by the target/m68k code which will no longer be handled by calling the unassigned_access hook.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20181210165636.28366-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-16target/m68k: In get_physical_address() check for memory access failuresPeter Maydell
In get_physical_address(), use address_space_ldl() and address_space_stl() instead of ldl_phys() and stl_phys(). This allows us to check whether the memory access failed. For the moment, we simply return -1 in this case; add a TODO comment that we should ideally generate the appropriate kind of fault. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20181210165636.28366-3-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-16target/m68k: In dump_address_map() check for memory access failuresPeter Maydell
In dump_address_map(), use address_space_ldl() instead of ldl_phys(). This allows us to check whether the memory access failed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20181210165636.28366-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-16Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190510' into stagingPeter Maydell
Add CPUClass::tlb_fill. Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads. # gpg: Signature made Fri 10 May 2019 19:48:37 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20190510: (27 commits) tcg: Use tlb_fill probe from tlb_vaddr_to_host tcg: Remove CPUClass::handle_mmu_fault tcg: Use CPUClass::tlb_fill in cputlb.c target/xtensa: Convert to CPUClass::tlb_fill target/unicore32: Convert to CPUClass::tlb_fill target/tricore: Convert to CPUClass::tlb_fill target/tilegx: Convert to CPUClass::tlb_fill target/sparc: Convert to CPUClass::tlb_fill target/sh4: Convert to CPUClass::tlb_fill target/s390x: Convert to CPUClass::tlb_fill target/riscv: Convert to CPUClass::tlb_fill target/ppc: Convert to CPUClass::tlb_fill target/openrisc: Convert to CPUClass::tlb_fill target/nios2: Convert to CPUClass::tlb_fill target/moxie: Convert to CPUClass::tlb_fill target/mips: Convert to CPUClass::tlb_fill target/mips: Tidy control flow in mips_cpu_handle_mmu_fault target/mips: Pass a valid error to raise_mmu_exception for user-only target/microblaze: Convert to CPUClass::tlb_fill target/m68k: Convert to CPUClass::tlb_fill ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-15target/xtensa: implement exclusive access optionMax Filippov
The Exclusive Instructions provide a general-purpose mechanism for atomic updates of memory-based synchronization variables that can be used for exclusion algorithms. Use cmpxchg-based implementation that is sufficient for the typical use of exclusive access in atomic operations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-05-15target/xtensa: update list of exception causesMax Filippov
Add XEA2 exception cause codes defined in recent Xtensa ISA releases. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-05-15target/xtensa: implement block prefetch option opcodesMax Filippov
Block prefetch option adds a bunch of non-privileged opcodes that may be implemented as nops since QEMU doesn't model caches. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-05-14target/xtensa: implement DIWBUI.P opcodeMax Filippov
This is a recent addition to the set of data cache opcodes. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-05-13target/xtensa: Use tcg_gen_abs_i32Richard Henderson
Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13target/tricore: Use tcg_gen_abs_tlPhilippe Mathieu-Daudé
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20190423102145.14812-3-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13target/s390x: Use tcg_gen_abs_i64Richard Henderson
Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13target/ppc: Use tcg_gen_abs_tlRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13target/ppc: Use tcg_gen_abs_i32Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20190423102145.14812-2-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13target/cris: Use tcg_gen_abs_tlRichard Henderson
Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13target/arm: Use tcg_gen_abs_i64 and tcg_gen_gvec_absRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add support for integer absolute valueRichard Henderson
Remove a function of the same name from target/arm/. Use a branchless implementation of abs gleaned from gcc. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Specify optional vector requirements with a listRichard Henderson
Replace the single opcode in .opc with a null-terminated array in .opt_opc. We still require that all opcodes be used with the same .vece. Validate the contents of this list with CONFIG_DEBUG_TCG. All tcg_gen_*_vec functions will check any list active during .fniv expansion. Swap the active list in and out as we expand other opcodes, or take control away from the front-end function. Convert all existing vector aware front ends. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13Clean up decorations and whitespace around header guardsMarkus Armbruster
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-9-armbru@redhat.com>
2019-05-13Normalize header guard symbol definition.Markus Armbruster
We commonly define the header guard symbol without an explicit value. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-8-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-13Clean up ill-advised or unusual header guardsMarkus Armbruster
Leading underscores are ill-advised because such identifiers are reserved. Trailing underscores are merely ugly. Strip both. Our header guards commonly end in _H. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-7-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Changes to slirp/ dropped, as we're about to spin it off]
2019-05-13Clean up header guards that don't match their file nameMarkus Armbruster
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-6-armbru@redhat.com> [Rebase to master: update include/hw/net/ne2000-isa.h]
2019-05-13target/xtensa: Clean up core-isa.h header guardsMarkus Armbruster
scripts/clean-header-guards.pl warns these headers use reserved identifier _XTENSA_CORE_CONFIGURATION_H as header guard symbol. It additionally warns the guard doesn't match the file name. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use the guard symbol scripts/clean-header-guards.pl picks, less the TARGET_ prefix. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-5-armbru@redhat.com>
2019-05-13Use #include "..." for our own headers, <...> for othersMarkus Armbruster
Also delete a few redundant #include. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-2-armbru@redhat.com>
2019-05-10target/xtensa: implement MPU optionMax Filippov
The Memory Protection Unit Option (MPU) is a combined instruction and data memory protection unit with more protection flexibility than the Region Protection Option or the Region Translation Option but without any translation capability. It does no demand paging and does not reference a memory-based page table. Add memory protection unit option, internal state, SRs and opcodes. Implement MPU entries dumping in dump_mmu. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-05-10target/xtensa: add parity/ECC option SRsMax Filippov
Add SRs and rsr/wsr/xsr opcodes defined by the parity/ECC xtensa option. The implementation is trivial since we don't emulate parity/ECC yet. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-18 03:17:49 +0000