aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2018-10-24target/arm: Hoist address increment for vector memory opsRichard Henderson
This can reduce the number of opcodes required for certain complex forms of load-multiple (e.g. ld4.16b). Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 20181011205206.3552-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Report correct syndrome for FP/SIMD traps to Hyp modePeter Maydell
For traps of FP/SIMD instructions to AArch32 Hyp mode, the syndrome provided in HSR has more information than is reported to AArch64. Specifically, there are extra fields TA and coproc which indicate whether the trapped instruction was FP or SIMD. Add this extra information to the syndromes we construct, and mask it out when taking the exception to AArch64. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-11-peter.maydell@linaro.org
2018-10-24target/arm: Get IL bit correct for v7 syndrome valuesPeter Maydell
For the v7 version of the Arm architecture, the IL bit in syndrome register values where the field is not valid was defined to be UNK/SBZP. In v8 this is RES1, which is what QEMU currently implements. Handle the desired v7 behaviour by squashing the IL bit for the affected cases: * EC == EC_UNCATEGORIZED * prefetch aborts * data aborts where ISV is 0 (The fourth case listed in the v8 Arm ARM DDI 0487C.a in section G7.2.70, "illegal state exception", can't happen on a v7 CPU.) This deals with a corner case noted in a comment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-10-peter.maydell@linaro.org
2018-10-24target/arm: New utility function to extract EC from syndromePeter Maydell
Create and use a utility function to extract the EC field from a syndrome, rather than open-coding the shift. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-9-peter.maydell@linaro.org
2018-10-24target/arm: Implement HCR.PTWPeter Maydell
If the HCR_EL2 PTW virtualizaiton configuration register bit is set, then this means that a stage 2 Permission fault must be generated if a stage 1 translation table access is made to an address that is mapped as Device memory in stage 2. Implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-8-peter.maydell@linaro.org
2018-10-24target/arm: Implement HCR.VI and VFPeter Maydell
The HCR_EL2 VI and VF bits are supposed to track whether there is a pending virtual IRQ or virtual FIQ. For QEMU we store the pending VIRQ/VFIQ status in cs->interrupt_request, so this means: * if the register is read we must get these bit values from cs->interrupt_request * if the register is written then we must write the bit values back into cs->interrupt_request Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-7-peter.maydell@linaro.org
2018-10-24target/arm: ISR_EL1 bits track virtual interrupts if IMO/FMO setPeter Maydell
The A/I/F bits in ISR_EL1 should track the virtual interrupt status, not the physical interrupt status, if the associated HCR_EL2.AMO/IMO/FMO bit is set. Implement this, rather than always showing the physical interrupt status. We don't currently implement anything to do with external aborts, so this applies only to the I and F bits (though it ought to be possible for the outer guest to present a virtual external abort to the inner guest, even if QEMU doesn't emulate physical external aborts, so there is missing functionality in this area). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-6-peter.maydell@linaro.org
2018-10-24target/arm: Implement HCR.DCPeter Maydell
The HCR.DC virtualization configuration register bit has the following effects: * SCTLR.M behaves as if it is 0 for all purposes except direct reads of the bit * HCR.VM behaves as if it is 1 for all purposes except direct reads of the bit * the memory type produced by the first stage of the EL1&EL0 translation regime is Normal Non-Shareable, Inner Write-Back Read-Allocate Write-Allocate, Outer Write-Back Read-Allocate Write-Allocate. Implement this behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-5-peter.maydell@linaro.org
2018-10-24target/arm: Implement HCR.FBPeter Maydell
The HCR.FB virtualization configuration register bit requests that TLB maintenance, branch predictor invalidate-all and icache invalidate-all operations performed in NS EL1 should be upgraded from "local CPU only to "broadcast within Inner Shareable domain". For QEMU we NOP the branch predictor and icache operations, so we only need to upgrade the TLB invalidates: AArch32 TLBIALL, TLBIMVA, TLBIASID, DTLBIALL, DTLBIMVA, DTLBIASID, ITLBIALL, ITLBIMVA, ITLBIASID, TLBIMVAA, TLBIMVAL, TLBIMVAAL AArch64 TLBI VMALLE1, TLBI VAE1, TLBI ASIDE1, TLBI VAAE1, TLBI VALE1, TLBI VAALE1 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-4-peter.maydell@linaro.org
2018-10-24target/arm: Make switch_mode() file-localPeter Maydell
The switch_mode() function is defined in target/arm/helper.c and used only in that file and nowhere else, so we can make it file-local rather than global. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-3-peter.maydell@linaro.org
2018-10-24target/arm: Improve debug logging of AArch32 exception returnPeter Maydell
For AArch32, exception return happens through certain kinds of CPSR write. We don't currently have any CPU_LOG_INT logging of these events (unlike AArch64, where we log in the ERET instruction). Add some suitable logging. This will log exception returns like this: Exception return from AArch32 hyp to usr PC 0x80100374 paralleling the existing logging in the exception_return helper for AArch64 exception returns: Exception return from AArch64 EL2 to AArch64 EL0 PC 0x8003045c Exception return from AArch64 EL2 to AArch32 EL0 PC 0x8003045c (Note that an AArch32 exception return can only be AArch32->AArch32, never to AArch64.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-2-peter.maydell@linaro.org
2018-10-24target/arm: Convert v8.2-fp16 from feature bit to aa64pfr0 testRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert sve from feature bit to aa64pfr0 testRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert jazelle from feature bit to isar1 testRichard Henderson
Having V6 alone imply jazelle was wrong for cortex-m0. Change to an assertion for V6 & !M. This was harmless, because the only place we tested ARM_FEATURE_JAZELLE was for 'bxj' in disas_arm(), which is unreachable for M-profile cores. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert division from feature bits to isar0 testsRichard Henderson
Both arm and thumb2 division are controlled by the same ISAR field, which takes care of the arm implies thumb case. Having M imply thumb2 division was wrong for cortex-m0, which is v6m and does not have thumb2 at all, much less thumb2 division. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert v8 extensions from feature bits to isar testsRichard Henderson
Most of the v8 extensions are self-contained within the ISAR registers and are not implied by other feature bits, which makes them the easiest to convert. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: V8M should not imply V7VERichard Henderson
Instantiating mps2-an505 (cortex-m33) will fail make check when V7VE asserts that ID_ISAR0.Divide includes ARM division. It is also wrong to include ARM_FEATURE_LPAE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Move some system registers into a substructureRichard Henderson
Create struct ARMISARegisters, to be accessed during translation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Add support for VCPU event statesDongjiu Geng
This patch extends the qemu-kvm state sync logic with support for KVM_GET/SET_VCPU_EVENTS, giving access to yet missing SError exception. And also it can support the exception state migration. The SError exception states include SError pending state and ESR value, the kvm_put/get_vcpu_events() will be called when set or get system registers. When do migration, if source machine has SError pending, QEMU will do this migration regardless whether the target machine supports to specify guest ESR value, because if target machine does not support that, it can also inject the SError with zero ESR value. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1538067351-23931-3-git-send-email-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-23Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' ↵Peter Maydell
into staging Error reporting patches for 2018-10-22 # gpg: Signature made Mon 22 Oct 2018 13:20:23 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2018-10-22: (40 commits) error: Drop bogus "use error_setg() instead" admonitions vpc: Fail open on bad header checksum block: Clean up bdrv_img_create()'s error reporting vl: Simplify call of parse_name() vl: Fix exit status for -drive format=help blockdev: Convert drive_new() to Error vl: Assert drive_new() does not fail in default_drive() fsdev: Clean up error reporting in qemu_fsdev_add() spice: Clean up error reporting in add_channel() tpm: Clean up error reporting in tpm_init_tpmdev() numa: Clean up error reporting in parse_numa() vnc: Clean up error reporting in vnc_init_func() ui: Convert vnc_display_init(), init_keyboard_layout() to Error ui/keymaps: Fix handling of erroneous include files vl: Clean up error reporting in device_init_func() vl: Clean up error reporting in parse_fw_cfg() vl: Clean up error reporting in mon_init_func() vl: Clean up error reporting in machine_set_property() vl: Clean up error reporting in chardev_init_func() qom: Clean up error reporting in user_creatable_add_opts_foreach() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* RTC fixes (Artem) * icount fixes (Artem) * rr fixes (Pavel, myself) * hotplug cleanup (Igor) * SCSI fixes (myself) * 4.20-rc1 KVM header update (myself) * coalesced PIO support (Peng Hao) * HVF fixes (Roman B.) * Hyper-V refactoring (Roman K.) * Support for Hyper-V IPI (Vitaly) # gpg: Signature made Fri 19 Oct 2018 12:47:58 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) replay: pass raw icount value to replay_save_clock target/i386: kvm: just return after migrate_add_blocker failed hyperv_testdev: add SynIC message and event testmodes hyperv: process POST_MESSAGE hypercall hyperv: add support for KVM_HYPERV_EVENTFD hyperv: process SIGNAL_EVENT hypercall hyperv: add synic event flag signaling hyperv: add synic message delivery hyperv: make overlay pages for SynIC hyperv: only add SynIC in compatible configurations hyperv: qom-ify SynIC hyperv:synic: split capability testing and setting i386: add hyperv-stub for CONFIG_HYPERV=n default-configs: collect CONFIG_HYPERV* in hyperv.mak hyperv: factor out arch-independent API into hw/hyperv hyperv: make hyperv_vp_index inline hyperv: split hyperv-proto.h into x86 and arch-independent parts hyperv: rename kvm_hv_sint_route_set_sint hyperv: make HvSintRoute reference-counted hyperv: address HvSintRoute by X86CPU pointer ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20181018' into stagingPeter Maydell
Queued tcg patches. # gpg: Signature made Fri 19 Oct 2018 07:03:20 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20181018: (21 commits) cputlb: read CPUTLBEntry.addr_write atomically target/s390x: Check HAVE_ATOMIC128 and HAVE_CMPXCHG128 at translate target/s390x: Skip wout, cout helpers if op helper does not return target/s390x: Split do_cdsg, do_lpq, do_stpq target/s390x: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128 target/ppc: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128 target/arm: Check HAVE_CMPXCHG128 at translate time target/arm: Convert to HAVE_CMPXCHG128 target/i386: Convert to HAVE_CMPXCHG128 tcg: Split CONFIG_ATOMIC128 tcg: Add tlb_index and tlb_entry helpers cputlb: serialize tlb updates with env->tlb_lock cputlb: fix assert_cpu_is_self macro exec: introduce tlb_init target/unicore32: remove tlb_flush from uc32_init_fn target/alpha: remove tlb_flush from alpha_cpu_initfn tcg: distribute tcg_time into TCG contexts tcg: plug holes in struct TCGProfile tcg: fix use of uninitialized variable under CONFIG_PROFILER tcg: access cpu->icount_decr.u16.high with atomics ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19cpus hw target: Use warn_report() & friends to report warningsMarkus Armbruster
Calling error_report() in a function that takes an Error ** argument is suspicious. Convert a few that are actually warnings to warn_report(). While there, split a warning consisting of multiple sentences to conform to conventions spelled out in warn_report()'s contract. Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Fam Zheng <famz@redhat.com> Cc: Wei Huang <wei@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20181017082702.5581-5-armbru@redhat.com>
2018-10-19target/i386: kvm: just return after migrate_add_blocker failedLi Qiang
When migrate_add_blocker failed, the invtsc_mig_blocker is not appended so no need to remove. This can save several instructions. Signed-off-by: Li Qiang <liq3ea@163.com> Message-Id: <20181006091816.7659-1-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: process POST_MESSAGE hypercallRoman Kagan
Add handling of POST_MESSAGE hypercall. For that, add an interface to regsiter a handler for the messages arrived from the guest on a particular connection id (IOW set up a message connection in Hyper-V speak). Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-10-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: process SIGNAL_EVENT hypercallRoman Kagan
Add handling of SIGNAL_EVENT hypercall. For that, provide an interface to associate an EventNotifier with an event connection number, so that it's signaled when the SIGNAL_EVENT hypercall with the matching connection ID is called by the guest. Support for using KVM functionality for this will be added in a followup patch. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-8-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: make overlay pages for SynICRoman Kagan
Per Hyper-V spec, SynIC message and event flag pages are to be implemented as so called overlay pages. That is, they are owned by the hypervisor and, when mapped into the guest physical address space, overlay the guest physical pages such that 1) the overlaid guest page becomes invisible to the guest CPUs until the overlay page is turned off 2) the contents of the overlay page is preserved when it's turned off and back on, even at a different address; it's only zeroed at vcpu reset This particular nature of SynIC message and event flag pages is ignored in the current code, and guest physical pages are used directly instead. This happens to (mostly) work because the actual guests seem not to depend on the features listed above. This patch implements those pages as the spec mandates. Since the extra RAM regions, which introduce migration incompatibility, are only added at SynIC object creation which only happens when hyperv_synic_kvm_only == false, no extra compat logic is necessary. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-5-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: only add SynIC in compatible configurationsRoman Kagan
Certain configurations do not allow SynIC to be used in QEMU. In particular, - when hyperv_vpindex is off, SINT routes can't be used as they refer to the destination vCPU by vp_index - older KVM (which doesn't expose KVM_CAP_HYPERV_SYNIC2) zeroes out SynIC message and event pages on every msr load, breaking migration OTOH in-KVM users of SynIC -- SynIC timers -- do work in those configurations, and we shouldn't stop the guest from using them. To cover both scenarios, introduce an X86CPU property that makes CPU init code to skip creation of the SynIC object (and thus disables any SynIC use in QEMU) but keeps the KVM part of the SynIC working. The property is clear by default but is set via compat logic for older machine types. As a result, when hv_synic and a modern machine type are specified, QEMU will refuse to run unless vp_index is on and the kernel is recent enough. OTOH with an older machine type QEMU will run fine with hv_synic=on against an older kernel and/or without vp_index enabled but will disallow the in-QEMU uses of SynIC (in e.g. VMBus). Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-4-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: qom-ify SynICRoman Kagan
Make Hyper-V SynIC a device which is attached as a child to a CPU. For now it only makes SynIC visibile in the qom hierarchy, and maintains its internal fields in sync with the respecitve msrs of the parent cpu (the fields will be used in followup patches). Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-3-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv:synic: split capability testing and settingRoman Kagan
Put a bit more consistency into handling KVM_CAP_HYPERV_SYNIC capability, by checking its availability and determining the feasibility of hv-synic property first, and enabling it later. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-2-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19i386: add hyperv-stub for CONFIG_HYPERV=nRoman Kagan
This will allow to build slightly leaner QEMU that supports some HyperV features of KVM (e.g. SynIC timers, PV spinlocks, APIC assists, etc.) but nothing else on the QEMU side. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-6-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: factor out arch-independent API into hw/hypervRoman Kagan
A significant part of hyperv.c is not actually tied to x86, and can be moved to hw/. This will allow to maintain most of Hyper-V and VMBus target-independent, and to avoid conflicts with inclusion of arch-specific headers down the road in VMBus implementation. Also this stuff can now be opt-out with CONFIG_HYPERV. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: make hyperv_vp_index inlineRoman Kagan
Also make the inverse function, hyperv_find_vcpu, static as it's not used outside hyperv.c This paves the way to making hyperv.c built optionally. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-3-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: split hyperv-proto.h into x86 and arch-independent partsRoman Kagan
Some parts of the Hyper-V hypervisor-guest interface appear to be target-independent, so move them into a proper header. Not that Hyper-V ARM64 emulation is around the corner but it seems more conveninent to have most of Hyper-V and VMBus target-independent, and allows to avoid conflicts with inclusion of arch-specific headers down the road in VMBus implementation. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-2-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: rename kvm_hv_sint_route_set_sintRoman Kagan
There's nothing kvm-specific in it so follow the suite and replace "kvm_hv" prefix with "hyperv". Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921081836.29230-9-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: make HvSintRoute reference-countedRoman Kagan
Multiple entities (e.g. VMBus devices) can use the same SINT route. To make their lives easier in maintaining SINT route ownership, make it reference-counted. Adjust the respective API names accordingly. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921081836.29230-8-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: address HvSintRoute by X86CPU pointerRoman Kagan
Use X86CPU pointer to refer to the respective HvSintRoute instead of vp_index. This is more convenient and also paves the way for future enhancements. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921081836.29230-7-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: allow passing arbitrary data to sint ack callbackRoman Kagan
Make sint ack callback accept an opaque pointer, that is stored on sint_route at creation time. This allows for more convenient interaction with the callback. Besides, nothing outside hyperv.c should need to know the layout of HvSintRoute fields any more so its declaration can be removed from the header. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921081836.29230-6-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: synic: only setup ack notifier if there's a callbackRoman Kagan
There's no point setting up an sint ack notifier if no callback is specified. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921081836.29230-5-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: cosmetic: g_malloc -> g_newRoman Kagan
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921081836.29230-4-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19i386: hvf: Remove hvf_disabledRoman Bolshakov
accel_init_machine sets *(acc->allowed) to true if acc->init_machine(ms) succeeds. There's no need to have both hvf_allowed and hvf_disabled. Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20181018143051.48508-1-r.bolshakov@yadro.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19i386: hvf: Fix register refs if REX is presentRoman Bolshakov
According to Intel(R)64 and IA-32 Architectures Software Developer's Manual, the following one-byte registers should be fetched when REX prefix is present (sorted by reg encoding index): AL, CL, DL, BL, SPL, BPL, SIL, DIL, R8L - R15L The first 8 are fetched if REX.R is zero, the last 8 if non-zero. The following registers should be fetched for instructions without REX prefix (also sorted by reg encoding index): AL, CL, DL, BL, AH, CH, DH, BH Current emulation code doesn't handle accesses to SPL, BPL, SIL, DIL when REX is present, thefore an instruction 40883e "mov %dil,(%rsi)" is decoded as "mov %bh,(%rsi)". That caused an infinite loop in vp_reset: https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg03293.html Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20181018134401.44471-1-r.bolshakov@yadro.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19i386/kvm: add support for Hyper-V IPI sendVitaly Kuznetsov
Hyper-V PV IPI support is merged to KVM, enable the feature in Qemu. When enabled, this allows Windows guests to send IPIs to other vCPUs with a single hypercall even when there are >64 vCPUs in the request. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20181009130853.6412-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19target-i386: kvm: do not initialize padding fieldsPaolo Bonzini
The exception.pad field is going to be renamed to pending in an upcoming header file update. Remove the unnecessary initialization; it was introduced to please valgrind (commit 7e680753cfa2) but they were later rendered unnecessary by commit 076796f8fd27f4d, which added the "= {}" initializer to the declaration of "events". Therefore the patch does not change behavior in any way. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-18target/s390x: Check HAVE_ATOMIC128 and HAVE_CMPXCHG128 at translateRichard Henderson
Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18target/s390x: Skip wout, cout helpers if op helper does not returnRichard Henderson
When op raises an exception, it may not have initialized the output temps that would be written back by wout or cout. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18target/s390x: Split do_cdsg, do_lpq, do_stpqRichard Henderson
Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18target/s390x: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128Richard Henderson
Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18target/ppc: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128Richard Henderson
Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18target/arm: Check HAVE_CMPXCHG128 at translate timeRichard Henderson
Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 16:19:37 +0000