aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2019-04-29target/arm: Enable FPU for Cortex-M4 and Cortex-M33Peter Maydell
Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org
2019-04-29target/arm: Implement VLLDM for v7M CPUs with an FPUPeter Maydell
Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org
2019-04-29target/arm: Implement VLSTM for v7M CPUs with an FPUPeter Maydell
Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org
2019-04-29target/arm: Implement M-profile lazy FP state preservationPeter Maydell
The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org
2019-04-29target/arm: Add lazy-FP-stacking support to v7m_stack_write()Peter Maydell
Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org
2019-04-29target/arm: New function armv7m_nvic_set_pending_lazyfp()Peter Maydell
In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org
2019-04-29target/arm: New helper function arm_v7m_mmu_idx_all()Peter Maydell
Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org
2019-04-29target/arm: Activate M-profile floating point context when FPCCR.ASPEN is setPeter Maydell
The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org
2019-04-29target/arm: Set FPCCR.S when executing M-profile floating point insnsPeter Maydell
The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org
2019-04-29target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flagsPeter Maydell
We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org
2019-04-29target/arm: Move NS TBFLAG from bit 19 to bit 6Peter Maydell
Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org
2019-04-29target/arm: Handle floating point registers in exception returnPeter Maydell
Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org
2019-04-29target/arm: Allow for floating point in callee stack integrity checkPeter Maydell
The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org
2019-04-29target/arm: Clean excReturn bits when tail chainingPeter Maydell
The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org
2019-04-29target/arm: Clear CONTROL.SFPA in BXNS and BLXNSPeter Maydell
For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org
2019-04-29target/arm: Implement v7m_update_fpccr()Peter Maydell
Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org
2019-04-29target/arm: Handle floating point registers in exception entryPeter Maydell
Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org
2019-04-29target/arm/helper: don't return early for STKOF faults during stackingPeter Maydell
Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org
2019-04-29target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROLPeter Maydell
The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org
2019-04-29target/arm: Clear CONTROL_S.SFPA in SG insn if FPU presentPeter Maydell
If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org
2019-04-29target/arm: Decode FP instructions for M profilePeter Maydell
Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org
2019-04-29target/arm: Honour M-profile FP enable bitsPeter Maydell
Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org
2019-04-29target/arm: Disable most VFP sysregs for M-profilePeter Maydell
The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org
2019-04-29target/arm: Implement dummy versions of M-profile FP-related registersPeter Maydell
The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org
2019-04-29target/arm: Make sure M-profile FPSCR RES0 bits are not settablePeter Maydell
Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org
2019-04-29Add Nios II semihosting support.Sandra Loosemore
This patch adds support for libgloss semihosting to Nios II bare-metal emulation. The specification for the protocol can be found in the libgloss sources. Signed-off-by: Sandra Loosemore <sandra@codesourcery.com> Signed-off-by: Julian Brown <julian@codesourcery.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1554321185-2825-3-git-send-email-sandra@codesourcery.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-28Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190426' into stagingPeter Maydell
Add tcg_gen_extract2_*. Deal with overflow of TranslationBlocks. Respect access_type in io_readx. # gpg: Signature made Fri 26 Apr 2019 18:17:01 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20190426: cputlb: Fix io_readx() to respect the access_type tcg/arm: Restrict constant pool displacement to 12 bits tcg/ppc: Allow the constant pool to overflow at 32k tcg: Restart TB generation after out-of-line ldst overflow tcg: Restart TB generation after constant pool overflow tcg: Restart TB generation after relocation overflow tcg: Restart after TB code generation overflow tcg: Hoist max_insns computation to tb_gen_code tcg/aarch64: Support INDEX_op_extract2_{i32,i64} tcg/arm: Support INDEX_op_extract2_i32 tcg/i386: Support INDEX_op_extract2_{i32,i64} tcg: Use extract2 in tcg_gen_deposit_{i32,i64} tcg: Use deposit and extract2 in tcg_gen_shifti_i64 tcg: Add INDEX_op_extract2_{i32,i64} tcg: Implement tcg_gen_extract2_{i32,i64} Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-27Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190426' ↵Peter Maydell
into staging ppc patch queue 2019-04-26 Here's the first ppc target pull request for qemu-4.1. This has a number of things that have accumulated while qemu-4.0 was frozen. * A number of emulated MMU improvements from Ben Herrenschmidt * Assorted cleanups fro Greg Kurz * A large set of mostly mechanical cleanups from me to make target/ppc much closer to compliant with the modern coding style * Support for passthrough of NVIDIA GPUs using NVLink2 As well as some other assorted fixes. # gpg: Signature made Fri 26 Apr 2019 07:02:19 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.1-20190426: (36 commits) target/ppc: improve performance of large BAT invalidations ppc/hash32: Rework R and C bit updates ppc/hash64: Rework R and C bit updates ppc/spapr: Use proper HPTE accessors for H_READ target/ppc: Don't check UPRT in radix mode when in HV real mode target/ppc/kvm: Convert DPRINTF to traces target/ppc/trace-events: Fix trivial typo spapr: Drop duplicate PCI swizzle code spapr_pci: Get rid of duplicate code for node name creation target/ppc: Style fixes for translate/spe-impl.inc.c target/ppc: Style fixes for translate/vmx-impl.inc.c target/ppc: Style fixes for translate/vsx-impl.inc.c target/ppc: Style fixes for translate/fp-impl.inc.c target/ppc: Style fixes for translate.c target/ppc: Style fixes for translate_init.inc.c target/ppc: Style fixes for monitor.c target/ppc: Style fixes for mmu_helper.c target/ppc: Style fixes for mmu-hash64.[ch] target/ppc: Style fixes for mmu-hash32.[ch] target/ppc: Style fixes for misc_helper.c ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-26Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' ↵Peter Maydell
into staging x86 queue, 2019-04-25 * Hygon Dhyana CPU model (Pu Wen) * Categorize a few devices in hw/i386 (Ernest Esene) * Support host-cache-info on TOPOEXT CPUID leaf (Stanislav Lanci) # gpg: Signature made Thu 25 Apr 2019 19:12:25 BST # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-next-pull-request: Pass through cache information for TOPOEXT CPUs Categorize devices: iommu Categorize devices: IGD passthrough ISA bridge i386: Add new Hygon 'Dhyana' CPU model Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-26target/ppc: improve performance of large BAT invalidationsArtyom Tarasenko
Performing a complete flush is ~ 100 times faster than flushing 256MiB of 4KiB pages. Set a limit of 1024 pages and perform a complete flush afterwards. This patch significantly speeds up AIX 5.1 and NetBSD-ofppc. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <1555103178-21894-4-git-send-email-atar4qemu@gmail.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-26ppc/hash32: Rework R and C bit updatesBenjamin Herrenschmidt
With MT-TCG, we are now running translation in a racy way, thus we need to mimic hardware when it comes to updating the R and C bits, by doing byte stores. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190411080004.8690-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-26ppc/hash64: Rework R and C bit updatesBenjamin Herrenschmidt
With MT-TCG, we are now running translation in a racy way, thus we need to mimic hardware when it comes to updating the R and C bits, by doing byte stores. The current "store_hpte" abstraction is ill suited for this, we replace it with two separate callbacks for setting R and C. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190411080004.8690-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-26target/ppc: Don't check UPRT in radix mode when in HV real modeBenjamin Herrenschmidt
It appears that during kexec, we run for a while in hypervisor real mode with LPCR:HR set and LPCR:UPRT clear, which trips the assertion in ppc_radix64_handle_mmu_fault(). First this shouldn't be an assertion, it's a guest error. Then we shouldn't be checking these things in hypervisor real mode (or in virtual hypervisor guest real mode which is similar) as the real HW won't use those LPCR bits in those cases anyway, so technically it's ok to have this discrepancy. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190411080004.8690-2-clg@kaod.org> [dwg: Fix for 32-bit builds] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-26target/ppc/kvm: Convert DPRINTF to tracesGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155445152490.302073.17033451726459859333.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-26target/ppc/trace-events: Fix trivial typoGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155445151931.302073.18436485925081597460.stgit@bahia.lan> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-26target/ppc: Style fixes for translate/spe-impl.inc.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for translate/vmx-impl.inc.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for translate/vsx-impl.inc.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for translate/fp-impl.inc.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for translate.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for translate_init.inc.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for monitor.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for mmu_helper.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for mmu-hash64.[ch]David Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for mmu-hash32.[ch]David Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for misc_helper.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for mfrom_table.inc.c & mfrom_table_gen.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for mem_helper.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for machine.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-26target/ppc: Style fixes for kvm_ppc.h and kvm.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 09:30:40 +0000