aboutsummaryrefslogtreecommitdiff
path: root/target/xtensa
AgeCommit message (Collapse)Author
2018-11-20target/xtensa: drop num_[core_]regs from dc232b/dc233c configsMax Filippov
Now that xtensa_count_regs does the right thing, remove manual initialization of these fields from the affected configurations and let xtensa_finalize_config initialize them. Add XTREG_END to terminate register lists. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-11-20target/xtensa: gdbstub fix register countingMax Filippov
In order to communicate correctly with gdb xtensa gdbstub must provide expected number of registers in 'g' packet response. xtensa-elf-gdb expects both nonprivileged and privileged registers. xtensa-linux-gdb only expects nonprivileged registers. gdb only counts one contiguous stretch of registers, do the same for the core registers in the xtensa_count_regs. With this change qemu-system-xtensa is able to communicate with all xtensa-elf-gdb versions (versions prior to 8.2 require overlay fixup), and qemu-xtensa is able to communicate with all xtensa-linux-gdb versions, except 8.2. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract gen_check_interrupts callMax Filippov
- mark instructions that affect active IRQ level; - put call for gen_check_interrupts right after the instruction translation; when FLIX is enabled it will need to appear before other exits from the TB as well; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: make rsr/wsr helpers return voidMax Filippov
Now that all logic for TB termination is extracted from rsr/wsr their return value is not used and may be dropped. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract unconditional TB termination via slot 0Max Filippov
- mark instructions that require TB termination via slot 0; - put TB termination right after the instruction translation loop, if termination w/o TB linking wasn't requested; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: always end TB on CCOUNT access/CCOMPARE writeMax Filippov
Currently we only end TB in icount mode, because access to CCOUNT or write to CCOMPARE are IO operations. Simplify the behaviour a bit and end TB unconditionally. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: change SR number checks to assertionsMax Filippov
Opcode decoding with libisa takes care about range of valid group SRs, like CCOMPARE, IBREAKA, DBREAKA or DBREAKC. Turn range checks in wsr implementations into assertions. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract unconditional TB terminationMax Filippov
- mark all instructions that exit TB and require dynamic search for the next TB; - put TB termination right after the instruction translation loop; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract test for division by zeroMax Filippov
- mark quos/quou/rems/remu instructions; - drop parameter 0 from the translate_quou and split translate_remu from it; - put test for division by zero exception right after the coprocessor exception test; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract test for cpdisabled exceptionMax Filippov
- add XtensaOpcodeOps::coprocessor with bitmask of coprocessors used by the instruction; - replace coprocessor id parameter of gen_check_cpenable with the bitmask of used coprocessors; - collect coprocessor IDs used by an instruction in the disassembly loop; - put test for coprocessor disabled exception after the alloca test; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract test for alloca exceptionMax Filippov
- mark movsp instruction; - put test for alloca exception right after the test for window underflow; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract test for window underflow exceptionMax Filippov
- mark retw and retw.n instructions; - extract window inderflow test from retw helper; - put underflow exception check generation right after the overflow check; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract test for window overflow exceptionMax Filippov
- add ps.callinc to the TB flags, that allows testing all instructions for window overflow statically; - drop gen_window_check* functions; replace them with get_window_check that accepts bitmask of used registers; - add XtensaOpcodeOps::test_overflow that returns bitmask of implicitly used registers; use it for entry and call{,x}{4,8,12}; - drop window overflow test from the entry helper; - drop parameter 0 from translate_[di]cache and use translate_nop for d/i cache opcodes that don't need memory accessibility check; - add bitmask XtensaOpcodeOps::windowed_register_op that marks opcode arguments that refer to windowed registers; - translate windowed_register_op mask to a mask of actually used registers in the disassembly loop; - add check for window overflow right after the check for debug exception; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract test for debug exceptionMax Filippov
- mark break and break.n instructions; - collect debug cause bits from parameter 0 of instructions marked for debug exception; - put debug exception check right after syscall check; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract test for syscall instructionMax Filippov
- mark syscall instruction; - put syscall exception check right after privileged exception check; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract test for privileged instructionMax Filippov
- mark privileged instructions; - put single privileged instruction check after disassembly loop; - translate_[di]cache: drop parameter 0, shift parameters one down; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-01target/xtensa: extract test for an illegal instructionMax Filippov
- TB flags: add XTENSA_TBFLAG_CWOE that corresponds to the architectural CWOE state; - entry: move CWOE check from the helper to the test_ill_entry; - retw: move CWOE check from the helper to the test_ill_retw; - separate instruction disassembly loop and translation loop; save disassembly results in local array; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-09-17target/xtensa: support input from chardev consoleMax Filippov
Complete xtensa-semi chardev console implementation: allow reading input characters from file descriptor 0 and call sys_select_one simcall on it. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-09-17target/xtensa: fix s32c1i TCGMemOp flagsMax Filippov
s32c1i must load and store value with target endianness, not host. This results in an infinite loop in atomic cmpxchg sequences when target endianness doesn't match host endianness. Fixes: 9fb40342d4b3 ("target/xtensa: support MTTCG") Cc: qemu-stable@nongnu.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-09-17target/xtensa: fix FPU2000 bugsMax Filippov
- FPU2000 defines rfr and wfr opcodes, not rfr.s and wfr.s; - movcond.s uses incorrect operand in tcg_gen_movcond: in case the condition is not satisfied it must not change its argument 0. Fixes: c04e1692e3aa ("target/xtensa: extract FPU2000 opcode translators") Cc: qemu-stable@nongnu.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-09-17target/xtensa: convert to do_transaction_failedMax Filippov
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-19target/xtensa: add test_kc705_be coreMax Filippov
This is big-endian core with HiFi2 instructions. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-19target/xtensa: clean up gdbstub register handlingMax Filippov
- move register counting to xtensa/gdbstub.c - add symbolic names for register types and flags from GDB and use them in register counting and access functions. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-19target/xtensa: fix gdbstub register countsMax Filippov
This fixes communication with gdb in the presence of type-5 (TIE state mapped on user registers) and type-7 (special case of masked registers) registers in the xtensa core config. Cc: qemu-stable@nongnu.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-06target/xtensa/cpu: Set owner of memory region in xtensa_cpu_initfnThomas Huth
The instance_init function of the xtensa CPUs creates a memory region, but does not set an owner, so the memory region is not destroyed correctly when the CPU object is removed. This can happen when introspecting the CPU devices, so introspecting the CPU device will leave a dangling memory region object in the QOM tree. Make sure to set the right owner here to fix this issue. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-id: 1532005320-17794-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02hw/xtensa: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ $ git grep -n '[<>][<>]= ?[1-5]0' and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20180625124238.25339-22-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-30xtensa: Avoid calling get_page_addr_code() from helper functionPeter Maydell
The xtensa frontend calls get_page_addr_code() from its itlb_hit_test helper function. This function is really part of the TCG core's internals, and calling it from a target helper makes it awkward to make changes to that core code. It also means that we don't pass the correct retaddr to tlb_fill(), so we won't correctly handle the case where an exception is generated. The helper is used for the instructions IHI, IHU and IPFL. Change it to call cpu_ldb_code_ra() instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-30target/xtensa: Convert to TranslatorOpsRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-30target/xtensa: Change gen_intermediate_code dc to pointerRichard Henderson
This will reduce the size of the patch in the next patch, where the context will have to be a pointer. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-30target/xtensa: Convert to DisasContextBaseRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-30target/xtensa: Replace DISAS_UPDATE with DISAS_NORETURNRichard Henderson
The usage of DISAS_UPDATE is after noreturn helpers. It is thus indistinguishable from DISAS_NORETURN. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-30target/xtensa: check zero overhead loop alignmentMax Filippov
ISA book documents that the first instruction of zero overhead loop must fit completely into naturally aligned region of an instruction fetch unit size. Check that condition and log a message if it's violated. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-28move public invalidate APIs out of translate-all.{c,h}, clean upPaolo Bonzini
Place them in exec.c, exec-all.h and ram_addr.h. This removes knowledge of translate-all.h (which is an internal header) from several files outside accel/tcg and removes knowledge of AddressSpace from translate-all.c (as it only operates on ram_addr_t). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-08target/xtensa: Add trailing '\n' to qemu_log() callsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-id: 20180606152128.449-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/rth/tags/tcg-next-pull-request' into ↵Peter Maydell
staging tcg-next queue # gpg: Signature made Sat 02 Jun 2018 00:12:42 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/tcg-next-pull-request: tcg: Pass tb and index to tcg_gen_exit_tb separately Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01tcg: Pass tb and index to tcg_gen_exit_tb separatelyRichard Henderson
Do the cast to uintptr_t within the helper, so that the compiler can type check the pointer argument. We can also do some more sanity checking of the index argument. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01target: Do not include "exec/exec-all.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/exec-all.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(cpu_address_space_init|cpu_loop_|tlb_|tb_|GETPC|singlestep|TranslationBlock)" | \ xargs sed -i.bak '/#include "exec\/exec-all.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-10-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31target/xtensa: Include "qemu/timer.h" to use NANOSECONDS_PER_SECONDPhilippe Mathieu-Daudé
Since d0ce7e9cfc the dc232b structure uses the NANOSECONDS_PER_SECOND definition from "qemu/timer.h". Include it to allow further includes cleanup. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-7-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31Make tb_invalidate_phys_addr() take a MemTxAttrs argumentPeter Maydell
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to tb_invalidate_phys_addr(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180521140402.23318-3-peter.maydell@linaro.org
2018-05-21Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell
staging trivial patches for 2018-05-20 # gpg: Signature made Sun 20 May 2018 07:13:20 BST # gpg: using RSA key 701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: (22 commits) acpi: fix a comment about aml_call0() qapi/net.json: Fix the version number of the "vlan" removal gdbstub: Handle errors in gdb_accept() gdbstub: Use qemu_set_cloexec() replace functions which are only available in glib-2.24 typedefs: Remove PcGuestInfo from qemu/typedefs.h qemu-options: Allow -no-user-config again hw/timer/mt48t59: Fix bit-rotten NVRAM_PRINTF format strings Remove unnecessary variables for function return value trivial: Do not include pci.h if it is not necessary tests: fix tpm-crb tpm-tis tests race hw/ide/ahci: Keep ALLWINNER_AHCI() macro internal qemu-img-cmds.hx: add passive-aggressive note qemu-img: Make documentation between .texi and .hx consistent qemu-img: remove references to GEN_DOCS qemu-img.texi: fix command ordering qemu-img-commands.hx: argument ordering fixups HACKING: document preference for g_new instead of g_malloc qemu-option-trace: -trace enable= is a pattern, not a file slirp/debug: Print IP addresses in human readable form ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-20Remove unnecessary variables for function return valueLaurent Vivier
Re-run Coccinelle script scripts/coccinelle/return_directly.cocci Signed-off-by: Laurent Vivier <lvivier@redhat.com> ppc part Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-18target/xtensa: Honor CPU_DUMP_FPURichard Henderson
Acked-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-11Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180510' into staging target-arm queue: * hw/arm/iotkit.c: fix minor memory leak * softfloat: fix wrong-exception-flags bug for multiply-add corner case * arm: isolate and clean up DTB generation * implement Arm v8.1-Atomics extension * Fix some bugs and missing instructions in the v8.2-FP16 extension # gpg: Signature made Thu 10 May 2018 18:44:34 BST # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits) target/arm: Clear SVE high bits for FMOV target/arm: Fix float16 to/from int16 target/arm: Implement vector shifted FCVT for fp16 target/arm: Implement vector shifted SCVF/UCVF for fp16 target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only target/arm: Implement CAS and CASP target/arm: Fill in disas_ldst_atomic target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode target/riscv: Use new atomic min/max expanders tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add tcg: Introduce atomic helpers for integer min/max target/xtensa: Use new min/max expanders target/arm: Use new min/max expanders tcg: Introduce helpers for integer min/max atomic.h: Work around gcc spurious "unused value" warning make sure that we aren't overwriting mc->get_hotplug_handler by accident arm/boot: split load_dtb() from arm_load_kernel() platform-bus-device: use device plug callback instead of machine_done notifier pc: simplify MachineClass::get_hotplug_handler handling softfloat: Handle default NaN mode after pickNaNMulAdd, not before ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # target/riscv/translate.c
2018-05-10target/xtensa: Use new min/max expandersRichard Henderson
The generic expanders replace nearly identical code in the translator. Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180508151437.4232-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-09target/xtensa: avoid integer overflow in next_page PC checkEmilio G. Cota
If the PC is in the last page of the address space, next_page_start overflows to 0. Fix it. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-04-11icount: fix cpu_restore_state_from_tb for non-tb-exit casesPavel Dovgalyuk
In icount mode, instructions that access io memory spaces in the middle of the translation block invoke TB recompilation. After recompilation, such instructions become last in the TB and are allowed to access io memory spaces. When the code includes instruction like i386 'xchg eax, 0xffffd080' which accesses APIC, QEMU goes into an infinite loop of the recompilation. This instruction includes two memory accesses - one read and one write. After the first access, APIC calls cpu_report_tpr_access, which restores the CPU state to get the current eip. But cpu_restore_state_from_tb resets the cpu->can_do_io flag which makes the second memory access invalid. Therefore the second memory access causes a recompilation of the block. Then these operations repeat again and again. This patch moves resetting cpu->can_do_io flag from cpu_restore_state_from_tb to cpu_loop_exit* functions. It also adds a parameter for cpu_restore_state which controls restoring icount. There is no need to restore icount when we only query CPU state without breaking the TB. Restoring it in such cases leads to the incorrect flow of the virtual time. In most cases new parameter is true (icount should be recalculated). But there are two cases in i386 and openrisc when the CPU state is only queried without the need to break the TB. This patch fixes both of these cases. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox> [rth: Make can_do_io setting unconditional; move from cpu_exec; make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-26target/xtensa: fix timers testMax Filippov
The value of CCOUNT special register is calculated as time elapsed since CCOUNT == 0 multiplied by the core frequency. In icount mode time increment between consecutive instructions that don't involve time warps is constant, but unless the result of multiplication of this constant by the core frequency is a whole number the CCOUNT increment between these instructions may not be constant. E.g. with icount=7 each instruction takes 128ns, with core clock of 10MHz CCOUNT values for consecutive instructions are: 502: (128 * 502 * 10000000) / 1000000000 = 642.56 503: (128 * 503 * 10000000) / 1000000000 = 643.84 504: (128 * 504 * 10000000) / 1000000000 = 645.12 I.e.the CCOUNT increments depend on the absolute time. This results in varying CCOUNT differences for consecutive instructions in tests that involve time warps and don't set CCOUNT explicitly. Change frequency of the core used in tests so that clock cycle takes exactly 64ns. Change icount power used in tests to 6, so that each instruction takes exactly 1 clock cycle. With these changes CCOUNT increments only depend on the number of executed instructions and that's what timer tests expect, so they work correctly. Longer story: http://lists.nongnu.org/archive/html/qemu-devel/2018-03/msg04326.html Cc: Pavel Dovgaluk <Pavel.Dovgaluk@ispras.ru> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-03-26target/xtensa/import_core.sh: fix #include <xtensa-isa.h>Max Filippov
Change #include <xtensa-isa.h> to #include "xtensa-isa.h" in imported files to make references to local files consistent. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-03-26target/xtensa: add .inc. to non-top level source file namesMax Filippov
Fix definitions of existing cores and core importing script to follow the rule of naming non-top level source files. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-05 22:41:50 +0000