aboutsummaryrefslogtreecommitdiff
path: root/target/sparc
AgeCommit message (Collapse)Author
2017-03-09sparc/sparc64: grab BQL before calling cpu_check_irqsAlex Bennée
IRQ modification is part of device emulation and should be done while the BQL is held to prevent races when MTTCG is enabled. This adds assertions in the hw emulation layer and wraps the calls from helpers in the BQL. Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-03-02target/sparc: Restore ldstub of odd asisRichard Henderson
Fixes the booting of ss20 roms. Cc: qemu-stable@nongnu.org Reported-by: Michael Russo <mike@papersolve.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-24cputlb and arm/sparc targets: convert mmuidx flushes from varg to bitmapAlex Bennée
While the vargs approach was flexible the original MTTCG ended up having munge the bits to a bitmap so the data could be used in deferred work helpers. Instead of hiding that in cputlb we push the change to the API to make it take a bitmap of MMU indexes instead. For ARM some the resulting flushes end up being quite long so to aid readability I've tended to move the index shifting to a new line so all the bits being or-ed together line up nicely, for example: tlb_flush_page_by_mmuidx(other_cs, pageaddr, (1 << ARMMMUIdx_S1SE1) | (1 << ARMMMUIdx_S1SE0)); Signed-off-by: Alex Bennée <alex.bennee@linaro.org> [AT: SPARC parts only] Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> [PM: ARM parts only] Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-21monitor: Fix crashes when using HMP commands without CPUThomas Huth
When running certain HMP commands ("info registers", "info cpustats", "info tlb", "nmi", "memsave" or dumping virtual memory) with the "none" machine, QEMU crashes with a segmentation fault. This happens because the "none" machine does not have any CPUs by default, but these HMP commands did not check for a valid CPU pointer yet. Add such checks now, so we get an error message about the missing CPU instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1484309555-1935-1-git-send-email-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24migration: extend VMStateInfoJianjun Duan
Current migration code cannot handle some data structures such as QTAILQ in qemu/queue.h. Here we extend the signatures of put/get in VMStateInfo so that customized handling is supported. put now will return int type. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com> Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-18target-sparc: add ST_BLKINIT_ ASIs for UA2005+ CPUsArtyom Tarasenko
In OpenSPARC T1+ TWINX ASIs in store instructions are aliased with Block Initializing Store ASIs. "UltraSPARC T1 Supplement Draft D2.1, 14 May 2007" describes them in the chapter "5.9 Block Initializing Store ASIs" Integer stores of all sizes are allowed with these ASIs. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: store the UA2005 entries in sun4u formatArtyom Tarasenko
According to chapter 13.3 of the UltraSPARC T1 Supplement to the UltraSPARC Architecture 2005, only the sun4u format is available for data-access loads. Store UA2005 entries in the sun4u format to simplify processing. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: implement UA2005 ASI_MMU (0x21)Artyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: add more registers to dump_mmuArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: implement auto-demapping for UA2005 CPUsArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: allow 256M sized pagesArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: simplify ultrasparc_tsb_pointerArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: implement UA2005 TSB PointersArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: use SparcV9MMU type for sparc64 I/D-MMUsArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: replace the last tlb entry when no free entries leftArtyom Tarasenko
Implement the behavior described in the chapter 13.9.11 of UltraSPARC T1™ Supplement to the UltraSPARC Architecture 2005: "If a TLB Data-In replacement is attempted with all TLB entries locked and valid, the last TLB entry (entry 63) is replaced." Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: ignore writes to UA2005 CPU mondo queue registerArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: allow priveleged ASIs in hyperprivileged modeArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: use direct address translation in hyperprivileged modeArtyom Tarasenko
Please note that QEMU doesn't impelement Real->Physical address translation. The "Real Address" is always the "Physical Address". Suggested-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: fix immediate UA2005 trapsArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: implement UA2005 rdhpstate and wrhpstate instructionsArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: implement UA2005 GL registerArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: implement UA2005 hypervisor trapsArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: hypervisor mode takes over nucleus modeArtyom Tarasenko
Accordinf to UA2005, 9.3.3 "Address Space Identifiers", "In hyperprivileged mode, all instruction fetches and loads and stores with implicit ASIs use a physical address, regardless of the value of TL". Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: implement UltraSPARC-T1 Strand status ASRArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: implement UA2005 scratchpad registersArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: simplify replace_tlb_entry by using TTE_PGSIZEArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: on UA2005 don't deliver Interrupt_level_n IRQs in hypervisor modeArtyom Tarasenko
As described in Chapter 5.7.6 of the UltraSPARC Architecture 2005, outstanding disrupting exceptions that are destined for privileged mode can only cause a trap when the virtual processor is in nonprivileged or privileged mode and PSTATE.ie = 1. At all other times, they are held pending. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: add UltraSPARC T1 TLB #definesArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: add UA2005 TTE bit #definesArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: use explicit mmu register pointersArtyom Tarasenko
Use explicit register pointers while accessing D/I-MMU registers. Call cpu_unassigned_access on access to missing registers. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: store cpu super- and hypervisor flags in TBArtyom Tarasenko
Suggested-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18target-sparc: ignore MMU-faults if MMU is disabled in hypervisor modeArtyom Tarasenko
while IMMU/DMMU is disabled - ignore MMU-faults in hypervisorv mode or if CPU doesn't have hypervisor - signal TT_INSN_REAL_TRANSLATION_MISS/TT_DATA_REAL_TRANSLATION_MISS otherwise Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-13cputlb: drop flush_global flag from tlb_flushAlex Bennée
We have never has the concept of global TLB entries which would avoid the flush so we never actually use this flag. Drop it and make clear that tlb_flush is the sledge-hammer it has always been. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> [DG: ppc portions] Acked-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-13qom/cpu: move tlb_flush to cpu_common_resetAlex Bennée
It is a common thing amongst the various cpu reset functions want to flush the SoftMMU's TLB entries. This is done either by calling tlb_flush directly or by way of a general memset of the CPU structure (sometimes both). This moves the tlb_flush call to the common reset function and additionally ensures it is only done for the CONFIG_SOFTMMU case and when tcg is enabled. In some target cases we add an empty end_of_reset_fields structure to the target vCPU structure so have a clear end point for any memset which is resetting value in the structure before CPU_COMMON (where the TLB structures are). While this is a nice clean-up in general it is also a precursor for changes coming to cputlb for MTTCG where the clearing of entries can't be done arbitrarily across vCPUs. Currently the cpu_reset function is usually called from the context of another vCPU as the architectural power up sequence is run. By using the cputlb API functions we can ensure the right behaviour in the future. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-10target-sparc: Use ctpop helperRichard Henderson
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 15:04:37 +0000