aboutsummaryrefslogtreecommitdiff
path: root/target/s390x
AgeCommit message (Collapse)Author
2017-06-06target/s390x: End the TB after EXECUTERichard Henderson
This split will be required for implementing EXECUTE properly. Do this now as a separate step to aid comparison of before and after TB listings. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Save current ilen during translationRichard Henderson
Use this saved value instead of recomputing from next_pc difference. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Implement CSPGRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use atomic operations for COMPARE SWAP PURGERichard Henderson
Also provide the cross-cpu tlb flushing required by the PoO. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Fix EXECUTE with R1==0Richard Henderson
The PoO specifies that when R1==0, no ORing into the insn loaded from storage takes place. Load a zero for this case. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Fix some helper_ex problemsRichard Henderson
(1) The OR of the low bits or R1 into INSN were not being done consistently; it was forgotten along all but the SVC path. (2) The setting of ILEN was wrong on SVC path for EXRL. (3) The data load for ICM read too much. Fix these by consolidating data load at the beginning, using get_ilen to control the number of bytes loaded, and ORing in the byte from R1. Use extract64 from the full aligned insn to extract arguments. Pass in ILEN rather than RET as the more natural way to give the required data along the SVC path. Modify ENV->CC_OP directly rather than include it in the functional interface. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_mvcs/mvcpRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_lraRichard Henderson
Fix saving exception_index around mmu_translate; eliminate a dead store. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_tprotRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_testblockRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_stctlRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_lctlRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_lctlgRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_trtRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_treRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_trRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_unpkRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_cksmRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_clcleRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_mvcleRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_mvclRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_stamRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_lamRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_mvstRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_mvpgRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_clstRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_srstRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_clmRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_clcRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_mvcRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_xcRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_ocRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use unwind data for helper_ncRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Move helper_ex to end of fileRichard Henderson
This will avoid needing forward declarations in following patches. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Use cpu_loop_exit_restore for tlb_fillRichard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06target/s390x: Add support for the TEST BLOCK instructionThomas Huth
TEST BLOCK was likely once used to execute basic memory tests, but nowadays it's just a (slow) way to clear a page. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1495128400-23759-1-git-send-email-thuth@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-06s390x/cpumodel: improve defintion search without an IBCDavid Hildenbrand
Currently, under z/VM on a 0x2827, QEMU will detect a 0x2828 if no IBC value is provided. QEMU will simply take the last model of that HW generation, which happens to be the BC version. Let's improve our search for that case by selecting the latest CPU definition that matches the CPU type. This for example will avoid detecting an z13 as a z13s. We might still detect a GA2 version on a GA1 system, but as we don't have further information at hand, there isn't too much we can do about it. The alternative of always presenting the oldest GA is not backward compatible, e.g: You're running on 0x2827 GA2. Old QEMU version indicated "0x2828 GA1 == 0x2827 GA2". After you updated QEMU, you suddenly detect "0x2827 GA1". You're previous libvirt guest might suddenly refuse to run. In the end presenting a newer GA level does not matter because: 1: All GAX models share the same base feature set. A GAX++ might support "more features". 2: Without an IBC, the guest can't detect the GA version. If we have no IBC (esp. unblocked_ibc == 0), the IBC we will present to the guest in read_SCP_info() will be 0. The guest will not know which GA version it has. The problem of missing IBC propagates. If we don't have a feature of the GA++ version, also our guest won't have it. So in summary, the guest also has no idea of its GA version. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170531193434.6918-3-david@redhat.com> Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [improve patch description by reusing mailing list discussion]
2017-06-06s390x/cpumodel: take care of the cpuid format bit for KVMDavid Hildenbrand
Let's also properly forward that bit. It should always be set. I verified it under z/VM, it seems to be always set there. For now, zKVM guests never get that bit set when the CPU model is active. The PoP mentiones, that z800 + z900 (HW generation 7) always set this bit to 0, so let's take care of that. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170531193434.6918-2-david@redhat.com> Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-06s390x/css: fence off MIDACornelia Huck
MIDA (modified indirect data addressing) is an optional facility, and we (currently) don't support it. Let's post an operand exception if the guest tries to set it in the orb and a channel program check if it is set in a ccw, as specified in the Principles of Operation. Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-05target/s390: Use tcg_gen_lookup_and_goto_ptrRichard Henderson
Tested-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-01migration: Remove unneeded includes of migration/vmstate.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-30Merge remote-tracking branch 'armbru/tags/pull-qapi-2017-05-23' into stagingStefan Hajnoczi
QAPI patches for 2017-05-23 # gpg: Signature made Tue 23 May 2017 12:33:32 PM BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * armbru/tags/pull-qapi-2017-05-23: qapi-schema: Remove obsolete note from ObjectTypeInfo block: Use QDict helpers for --force-share shutdown: Expose bool cause in SHUTDOWN and RESET events shutdown: Add source information to SHUTDOWN and RESET shutdown: Preserve shutdown cause through replay shutdown: Prepare for use of an enum in reset/shutdown_request shutdown: Simplify shutdown_signal sockets: Plug memory leak in socket_address_flatten() scripts/qmp/qom-set: fix the value argument passed to srv.command() Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-19s390/kvm: do not reset riccb on initial cpu resetChristian Borntraeger
The riccb is kept unchanged during initial cpu reset. Move the data structure to the other registers that are unchanged. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-05-19s390x/css: ccw translation infrastructureXiao Feng Ren
Implement a basic infrastructure of handling channel I/O instruction interception for passed through subchannels: 1. Branch the code path of instruction interception handling by SubChannel type. 2. For a passed-through subchannel, issue the ORB to kernel to do ccw translation and perform an I/O operation. 3. Assign different condition code based on the I/O result, or trigger a program check. Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170517004813.58227-12-bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-05-19s390x/css: add s390-squash-mcss machine optionXiao Feng Ren
We want to support real (i.e. not virtual) channel devices even for guests that do not support MCSS-E (where guests may see devices from any channel subsystem image at once). As all virtio-ccw devices are in css 0xfe (and show up in the default css 0 for guests not activating MCSS-E), we need an option to squash both the virtio subchannels and e.g. passed-through subchannels from their real css (0-3, or 0 for hosts not activating MCSS-E) into the default css. This will be exploited in a later patch. Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170517004813.58227-4-bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-05-12target/s390x: implement serialization in BRANCH CONDITIONAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <20170509082800.10756-4-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-05-12target/s390x: fix SIGNAL PROCESSOR return valueAurelien Jarno
The SIGNAL PROCESSOR helper returns its value through the CC register. set_cc_static should be called just after the helper. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <20170509082800.10756-3-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-05-12target/s390x: mask the SIGP order_code using SIGP_ORDER_MASKAurelien Jarno
For that move the definition from kvm.c to cpu.h Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <20170509082800.10756-2-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-05-12target/s390x: Use atomic operations for LOAD AND OPRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 14:57:12 +0000