aboutsummaryrefslogtreecommitdiff
path: root/target/s390x
AgeCommit message (Collapse)Author
2017-10-06s390x/tcg: initialize machine check queueCornelia Huck
Just as for external interrupts and I/O interrupts, we need to initialize mchk_index during cpu reset. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390/kvm: Support for get/set of extended TOD-Clock for guestCollin L. Walling
Provides an interface for getting and setting the guest's extended TOD-Clock via a single ioctl to kvm. If the ioctl fails because it is not support by kvm, then we fall back to the old style of retrieving the clock via two ioctls. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [split failure change from epoch index change] Message-Id: <20171004105751.24655-2-borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> [some cosmetic fixes]
2017-10-06s390x/tcg: make STFL store into the lowcoreDavid Hildenbrand
Using virtual memory access is wrong and will soon include low-address protection checks, which is to be bypassed for STFL. STFL is a privileged instruction and using LowCore requires !CONFIG_USER_ONLY, so add the ifdef and move the declaration to the right place. This was originally part of a bigger STFL(E) refactoring. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170927170027.8539-4-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x: introduce and use S390_MAX_CPUSDavid Hildenbrand
Will be handy in the future. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170928134609.16985-6-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06target/s390x: get rid of next_core_idDavid Hildenbrand
core_id is not needed by linux-user, as the core_id a.k.a. CPU address is only accessible from kernel space. Therefore, drop next_core_id and make cpu_index get autoassigned again for linux-user. While at it, shield core_id and cpuid completely from linux-user. cpuid can also only be queried from kernel space. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170928134609.16985-5-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/cpumodel: fix max STFL(E) bit numberDavid Hildenbrand
Not that it would matter in the near future, but it is actually 2048 bytes, therefore 16384 possible bits. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170928134609.16985-4-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x: raise CPU hotplug irq after really hotpluggedDavid Hildenbrand
Let's move it into the machine, so we trigger the IRQ after setting ms->possible_cpus (which SCLP uses to construct the list of online CPUs). This also fixes a problem reported by Thomas Huth, whereby qemu can be crashed using the none machine qemu-s390x-softmmu -M none -monitor stdio -> device_add qemu-s390-cpu Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170928134609.16985-3-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: make idte/ipte use the new _real mmuDavid Hildenbrand
We don't wrap addresses in the mmu for the _real case, therefore the behavior should be unchanged. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-7-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: make testblock use the new _real mmuDavid Hildenbrand
Low address protection checks will be moved into the mmu later. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-6-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: make stora(g) use the new _real mmuDavid Hildenbrand
As we properly handle the return address now, we can drop potential_page_fault(). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-5-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: make lura(g) use the new _real mmu.David Hildenbrand
Looks like, lurag was not loading 64bit but only 32bit. As we properly handle the return address now, we can drop potential_page_fault(). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-4-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: add MMU for real addressesDavid Hildenbrand
This makes it easy to access real addresses (prefix) and in addition checks for valid memory addresses, which is missing when using e.g. stl_phys(). We can later reuse it to implement low address protection checks (then we might even decide to introduce yet another MMU for absolute addresses, just for handling storage keys and low address protection). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-3-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: fix checking for invalid memory checkDavid Hildenbrand
It should have been a >=, but let's directly perform a proper access check to also be able to deal with hotplugged memory later. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-2-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/kvm: fix and cleanup storing CPU statusDavid Hildenbrand
env->psa is a 64bit value, while we copy 4 bytes into the save area, resulting always in 0 getting stored. Let's try to reduce such errors by using a proper structure. While at it, use correct cpu->be conversion (and get_psw_mask()), as we will be reusing this code for TCG soon. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170922140338.6068-1-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x: use generic cpu_model parsingIgor Mammedov
Define default CPU type in generic way in machine class_init and let common machine code handle cpu_model parsing. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <1505998749-269631-1-git-send-email-imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: add basic MSA featuresDavid Hildenbrand
The STFLE bits for the MSA (extension) facilities simply indicate that the respective instructions can be executed. The QUERY subfunction can then be used to identify which features exactly are available. Availability of subfunctions can also vary on real hardware. For now, we simply implement a CPU model without any available subfunctions except QUERY (which is always around). As all MSA functions behave quite similarly, we can use one translation handler for now. Prepare the code for implementation of actual subfunctions. At least MSA is helpful for now, as older Linux kernels require this facility when compiled for a z9 model. Allow to enable the facilities for the qemu cpu model. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170920153016.3858-4-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: move wrap_address() to internal.hDavid Hildenbrand
We want to use it in another file. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170920153016.3858-3-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: implement spm (SET PROGRAM MASK)David Hildenbrand
Missing and is used inside Linux in the context of CPACF. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170920153016.3858-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-27Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20170927a' into staging Migration pull 2017-09-27 # gpg: Signature made Wed 27 Sep 2017 14:56:23 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20170927a: migration: Route more error paths migration: Route errors up through vmstate_save migration: wire vmstate_save_state errors up to vmstate_subsection_save migration: Check field save returns migration: check pre_save return in vmstate_save_state migration: pre_save return int migration: disable auto-converge during bulk block migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-27migration: pre_save return intDr. David Alan Gilbert
Modify the pre_save method on VMStateDescription to return an int rather than void so that it potentially can fail. Changed zillions of devices to make them return 0; the only case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already had an error_report/return case. Note: If you add an error exit in your pre_save you must emit an error_report to say why. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27s390x/cpumodel: remove ais from z14 default model-> also for 2.10.1Christian Borntraeger
We disabled ais for 2.10, so let's also remove it from the z14 default model. Fixes: 3f2d07b3b01e ("s390x/ais: for 2.10 stable: disable ais facility") CC: qemu-stable@nongnu.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20170927072030.35737-2-borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-22s390x/ais: for 2.10 stable: disable ais facilityChristian Borntraeger
The migration interface for ais was introduced with kernel 4.13 but the capability itself had been active since 4.12. As migration support is considered necessary lets disable ais in the 2.10 stable version. A proper fix and re-enablement will be done for qemu 2.11. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20170921140834.14233-2-borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x/ccw: create s390 phb for compat reasons as wellCornelia Huck
d32bd032d8 ("s390x/ccw: create s390 phb conditionally") made registering the s390 pci host bridge conditional on presense of the zpci facility bit. Sadly, that breaks migration from machines that did not use the cpu model (2.7 and previous). Create the s390 phb for pre-cpu model machines as well: We can tweak s390_has_feat() to always indicate the zpci facility bit when no cpu model is available (on 2.7 and previous compat machines). Fixes: d32bd032d8 ("s390x/ccw: create s390 phb conditionally") Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: allow CPU hotplug in random core-id orderDavid Hildenbrand
SCLP correctly indicates the core-id aka. CPU address for each available CPU. As the core-id corresponds to cpu_index, also a newly created kvm vcpu gets assigned this core-id as vcpu id. So SIGP in the kernel works correctly (it uses the vcpu id to lookup the correct CPU). So there should be nothing hindering us from hotplugging CPUs in random core-id order. This now makes sure that the output from "query-hotpluggable-cpus" is completely true. Until now, a specific order is implicit. Performance vice, hotplugging CPUs in non-sequential order might not be the best thing to do, as VCPU lookup inside KVM might be a little slower. But that doesn't hinder us from supporting it. next_core_id is now used by linux user only. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-23-david@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: get rid of cpu_s390x_create()David Hildenbrand
Now that there is only one user of cpu_s390x_create() left, make cpu creation look like on x86. - Perform the model/properties split and checks in s390_init_cpus() - Parse features only once without having to remember if already parsed - Pass only the typename to s390x_new_cpu() - Use the typename of an existing CPU for hotplug via cpu-add Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-21-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: allow cpu hotplug via device_addDavid Hildenbrand
E.g. the following now works: device_add host-s390-cpu,id=cpu1,core-id=1 The system will perform the same checks as when using cpu_add: - If the core_id is already in use - If the next sequential core_id isn't used - If core-id >= max_cpu is specified In addition, mixed CPU models are checked. E.g. if starting with -cpu host and trying to hotplug "qemu-s390-cpu": "Mixed CPU models are not supported on s390x." Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-17-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: print CPU definitions in sorted orderDavid Hildenbrand
Other architectures provide nicely sorted lists, let's do it similarly on s390x. While at it, clean up the code we have to touch either way. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-16-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19target/s390x: rename next_cpu_id to next_core_idDavid Hildenbrand
Adapt to the new term "core_id". While at it, fix the type and drop the initialization to 0 (which is superfluous). Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-15-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19target/s390x: use "core-id" for cpu number/address/id handlingDavid Hildenbrand
Some time ago we discussed that using "id" as property name is not the right thing to do, as it is a reserved property for other devices and will not work with device_add. Switch to the term "core-id" instead, and use it as an equivalent to "CPU address" mentioned in the PoP. There is no such thing as cpu number, so rename env.cpu_num to env.core_id. We use "core-id" as this is the common term to use for device_add later on (x86 and ppc). We can get rid of cpu->id now. Keep cpu_index and env->core_id in sync. cpu_index was already implicitly used by e.g. cpu_exists(), so keeping both in sync seems to be the right thing to do. cpu_index will now no longer automatically get set via cpu_exec_realizefn(). For now, we were lucky that both implicitly stayed in sync. Our new cpu property "core-id" can be a static property. Range checks can be avoided by using the correct type and the "setting after realized" check is done implicitly. device_add will later need the reserved "id" property. Hotplugging a CPU on s390x will then be: "device_add host-s390-cpu,id=cpu2,core-id=2". Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-14-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19target/s390x: set cpu->id for linux user when realizingDavid Hildenbrand
scc->next_cpu_id is updated when realizing. Setting it just before that point looks cleaner. Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-13-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19target/s390x: use program_interrupt() in per_check_exception()David Hildenbrand
Clean it up by reusing program_interrupt(). Add a concern regarding ilen. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-11-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19target/s390x: use trigger_pgm_exception() in s390_cpu_handle_mmu_fault()David Hildenbrand
This looks cleaner. linux-user will not use the ilen field, so setting it doesn't do any harm. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-10-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: move sclp_service_call() to sclp.hDavid Hildenbrand
Implemented in sclp.c, so let's move it to the right include file. Also adjust some includes. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-9-david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19target/s390x: move some s390x typedefs to cpu-qom.hDavid Hildenbrand
This allows us to drop inclusion of cpu_models.h in cpu-qom.h, and prepares for using cpu-qom.h as a s390 specific version of typedefs.h Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-8-david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: move subsystem_reset() to s390-virtio-ccw.hDavid Hildenbrand
Implemented in s390-virtio-ccw.c, so move it to the right header. We can also drop the extern. Fix up one include. Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-7-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: move s390_virtio_hypercall() to s390-virtio-hcall.hDavid Hildenbrand
Implemented in hw/s390x/s390-virtio-hcall.c, so let's move it to the right header file. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-6-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19exec,dump,i386,ppc,s390x: don't include exec/cpu-all.h explicitlyDavid Hildenbrand
All but a handful of files include exec/cpu-all.h via cpu.h only. As these files already include cpu.h, let's just drop the additional include. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x/pci: fixup ind_offset of msix routing entryYi Min Zhao
The guest uses the mpcifc instruction to register the aibvo of a zpci device, which is the starting offset of indicators in the indicator area and thus remains constant. Each msix vector is an offset from the aibvo. When we map a msix route to an adapter route, we should not modify the starting offset, but instead add the vector to the starting offset to get the absolute offset in the specific route. Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Message-Id: <1504606380-49341-3-git-send-email-zyimin@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x/pci: remove idx from msix msg dataYi Min Zhao
PCIDevice pointer has been a parameter of kvm_arch_fixup_msi_route(). So we don't need to store zpci idx in msix message data to find out the specific zpci device. Instead, we could use pci device id to find its corresponding zpci device. Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Message-Id: <1504606380-49341-2-git-send-email-zyimin@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19Convert remaining error_report() to warn_report()Alistair Francis
In a previous patch (3dc6f8693694a649a9c83f1e2746565b47683923) we converted uses of error_report("warning:"... to use warn_report() instead. This was to help standardise on a single method of printing warnings to the user. There appears to have been some cases that slipped through in patch sets applied around the same time, this patch catches the few remaining cases. All of the warnings were changed using this command: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. Two messages were manually fixed up as well. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <eec8cba0d5434bd828639e5e45f12182490ff47d.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-06target: [tcg] Use a generic enum for DISAS_ valuesLluís Vilanova
Used later. An enum makes expected values explicit and bounds the value space of switches. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <150002049746.22386.2316077281615710615.stgit@frigg.lan> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-01s390x: replace cpu_s390x_init() with cpu_generic_init()Igor Mammedov
cpu_s390x_init() is used only *-user targets indirectly via cpu_init() macro and has a hack to assign ids to created cpus (I'm not sure if 'id' really matters to *-user emulation). So to on safe side, instead of having custom wrapper to do numbering replace it with cpu_generic_init() and use S390CPUClass::next_cpu_id which could serve the same purpose as static variable and move cpu->id initialization to s390_cpu_initfn for CONFIG_USER_ONLY use-case. PS: ifdef is ugly but it allows us to hide s390x detail that isn't set by *-user targets and reuse generic cpu creation utility for btoh machine and user emulation. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <1504185578-80843-1-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-08-30target/s390x: cleanup cpu.hDavid Hildenbrand
Let's reshuffle the function prototypes so we get a cleaner outline of the files. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-19-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30s390x/kvm: move KVM declarations and stubs to separate filesDavid Hildenbrand
Let's do it just like the other architectures. Introduce kvm-stub.c for stubs and kvm_s390x.h for the declarations. Change license to GPL2+ and keep copyright notice. As we are dropping the sysemu/kvm.h include from cpu.h, fix up includes. Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-18-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30s390x: avoid calling kvm_ functions outside of target/s390x/David Hildenbrand
Let's just introduce an helper. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-17-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30target/s390x: move a couple of functions to cpu.cDavid Hildenbrand
Prepare to move more stuff (especially KVM related) from cpu.h to internal.h. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-16-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30target/s390x: introduce internal.hDavid Hildenbrand
cpu.h should only contain what really has to be accessed outside of target/s390x/. Add internal.h which can only be used inside target/s390x/. Move everything that isn't fast enough to run away and restructure it right away. We'll move all kvm_* stuff later. Minor style fixes to avoid checkpatch warning to: - struct Lowcore: "{" goes into same line as typedef - struct LowCore: add spaces around "-" in array length calculations - time2tod() and tod2time(): move "{" to separate line - get_per_atmid(): add space between ")" and "?". Move cases by one char. - get_per_atmid(): drop extra paremthesis around (1 << 6) Change license of new file to GPL2+ and keep copyright notice. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-15-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30target/s390x: move get_per_in_range() to misc_helper.cDavid Hildenbrand
Only used in that file. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-14-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30target/s390x: move s390_do_cpu_reset() to diag.cDavid Hildenbrand
Only used in that file. Also drop the comment, not really needed. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-13-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30target/s390x: move psw_key_valid() to mem_helper.cDavid Hildenbrand
Only used in that file. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-12-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-05 21:34:40 +0000