aboutsummaryrefslogtreecommitdiff
path: root/target/riscv
AgeCommit message (Collapse)Author
2024-01-10target/riscv/tcg: update priv_ver on user_set extensionsDaniel Henrique Barboza
We'll add a new bare CPU type that won't have any default priv_ver. This means that the CPU will default to priv_ver = 0, i.e. 1.10.0. At the same we'll allow these CPUs to enable extensions at will, but then, if the extension has a priv_ver newer than 1.10, we'll end up disabling it. Users will then need to manually set priv_ver to something other than 1.10 to enable the extensions they want, which is not ideal. Change the setter() of extensions to allow user enabled extensions to bump the priv_ver of the CPU. This will make it convenient for users to enable extensions for CPUs that doesn't set a default priv_ver. This change does not affect any existing CPU: vendor CPUs does not allow extensions to be enabled, and generic CPUs are already set to priv_ver LATEST. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231218125334.37184-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv/tcg: do not use "!generic" CPU checksDaniel Henrique Barboza
Our current logic in get/setters of MISA and multi-letter extensions works because we have only 2 CPU types, generic and vendor, and by using "!generic" we're implying that we're talking about vendor CPUs. When adding a third CPU type this logic will break so let's handle it beforehand. In set_misa_ext_cfg() and set_multi_ext_cfg(), check for "vendor" cpu instead of "not generic". The "generic CPU" checks remaining are from riscv_cpu_add_misa_properties() and cpu_add_multi_ext_prop() before applying default values for the extensions. This leaves us with: - vendor CPUs will not allow extension enablement, all other CPUs will; - generic CPUs will inherit default values for extensions, all others won't. And now we can add a new, third CPU type, that will allow extensions to be enabled and will not inherit defaults, without changing the existing logic. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231218125334.37184-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv: create TYPE_RISCV_VENDOR_CPUDaniel Henrique Barboza
We want to add a new CPU type for bare CPUs that will inherit specific traits of the 2 existing types: - it will allow for extensions to be enabled/disabled, like generic CPUs; - it will NOT inherit defaults, like vendor CPUs. We can make this conditions met by adding an explicit type for the existing vendor CPUs and change the existing logic to not imply that "not generic" means vendor CPUs. Let's add the "vendor" CPU type first. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231218125334.37184-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv: Add support for Zacas extensionWeiwei Li
Add support for amocas.w/d/q instructions which are part of the ratified Zacas extension: https://github.com/riscv/riscv-zacas Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231207153842.32401-2-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv/kvm: rename riscv_reg_id() to riscv_reg_id_ulong()Daniel Henrique Barboza
kvm_riscv_reg_id() returns an id encoded with an ulong size, i.e. an u32 size when running TARGET_RISCV32 and u64 when running TARGET_RISCV64. Rename it to kvm_riscv_reg_id_ulong() to enhance code readability. It'll be in line with the existing kvm_riscv_reg_id_<size>() helpers. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20231208183835.2411523-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv/kvm: add RISCV_CONFIG_REG()Daniel Henrique Barboza
Create a RISCV_CONFIG_REG() macro, similar to what other regs use, to hide away some of the boilerplate. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20231208183835.2411523-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv/kvm: change timer regs size to u64Daniel Henrique Barboza
KVM_REG_RISCV_TIMER regs are always u64 according to the KVM API, but at this moment we'll return u32 regs if we're running a RISCV32 target. Use the kvm_riscv_reg_id_u64() helper in RISCV_TIMER_REG() to fix it. Reported-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20231208183835.2411523-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv/kvm: change KVM_REG_RISCV_FP_D to u64Daniel Henrique Barboza
KVM_REG_RISCV_FP_D regs are always u64 size. Using kvm_riscv_reg_id() in RISCV_FP_D_REG() ends up encoding the wrong size if we're running with TARGET_RISCV32. Create a new helper that returns a KVM ID with u64 size and use it with RISCV_FP_D_REG(). Reported-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20231208183835.2411523-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv/kvm: change KVM_REG_RISCV_FP_F to u32Daniel Henrique Barboza
KVM_REG_RISCV_FP_F regs have u32 size according to the API, but by using kvm_riscv_reg_id() in RISCV_FP_F_REG() we're returning u64 sizes when running with TARGET_RISCV64. The most likely reason why no one noticed this is because we're not implementing kvm_cpu_synchronize_state() in RISC-V yet. Create a new helper that returns a KVM ID with u32 size and use it in RISCV_FP_F_REG(). Reported-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20231208183835.2411523-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv/cpu.c: fix machine IDs gettersDaniel Henrique Barboza
mvendorid is an uint32 property, mimpid/marchid are uint64 properties. But their getters are returning bools. The reason this went under the radar for this long is because we have no code using the getters. The problem can be seem via the 'qom-get' API though. Launching QEMU with the 'veyron-v1' CPU, a model with: VEYRON_V1_MVENDORID: 0x61f (1567) VEYRON_V1_MIMPID: 0x111 (273) VEYRON_V1_MARCHID: 0x8000000000010000 (9223372036854841344) This is what the API returns when retrieving these properties: (qemu) qom-get /machine/soc0/harts[0] mvendorid true (qemu) qom-get /machine/soc0/harts[0] mimpid true (qemu) qom-get /machine/soc0/harts[0] marchid true After this patch: (qemu) qom-get /machine/soc0/harts[0] mvendorid 1567 (qemu) qom-get /machine/soc0/harts[0] mimpid 273 (qemu) qom-get /machine/soc0/harts[0] marchid 9223372036854841344 Fixes: 1e34150045 ("target/riscv/cpu.c: restrict 'mvendorid' value") Fixes: a1863ad368 ("target/riscv/cpu.c: restrict 'mimpid' value") Fixes: d6a427e2c0 ("target/riscv/cpu.c: restrict 'marchid' value") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20231211170732.2541368-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv/pmp: Use hwaddr instead of target_ulong for RV32Ivan Klokov
The Sv32 page-based virtual-memory scheme described in RISCV privileged spec Section 5.3 supports 34-bit physical addresses for RV32, so the PMP scheme must support addresses wider than XLEN for RV32. However, PMP address register format is still 32 bit wide. Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231123091214.20312-1-ivan.klokov@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv: Not allow write mstatus_vs without RVVLIU Zhiwei
If CPU does not implement the Vector extension, it usually means mstatus vs hardwire to zero. So we should not allow write a non-zero value to this field. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231215023313.1708-1-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv: Fix th.dcache.cval1 priviledge checkLIU Zhiwei
According to the specification, the th.dcache.cvall1 can be executed under all priviledges. The specification about xtheadcmo located in, https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadcmo/dcache_cval1.adoc Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Christoph Muellner <christoph.muellner@vrull.eu> Message-ID: <20231208094315.177-1-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv: The whole vector register move instructions depend on vsewMax Chou
The RISC-V v spec 16.6 section says that the whole vector register move instructions operate as if EEW=SEW. So it should depends on the vsew field of vtype register. Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20231129170400.21251-3-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-10target/riscv: Add vill check for whole vector register move instructionsMax Chou
The ratified version of RISC-V V spec section 16.6 says that `The instructions operate as if EEW=SEW`. So the whole vector register move instructions depend on the vtype register that means the whole vector register move instructions should raise an illegal-instruction exception when vtype.vill=1. Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231129170400.21251-2-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-08qemu/main-loop: rename QEMU_IOTHREAD_LOCK_GUARD to BQL_LOCK_GUARDStefan Hajnoczi
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL) instead, it is already widely used and unambiguous. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2024-01-05target/riscv: Fix mcycle/minstret increment behaviorXu Lu
The mcycle/minstret counter's stop flag is mistakenly updated on a copy on stack. Thus the counter increments even when the CY/IR bit in the mcountinhibit register is set. This commit corrects its behavior. Fixes: 3780e33732f88 (target/riscv: Support mcycle/minstret write operation) Signed-off-by: Xu Lu <luxu.kernel@bytedance.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-05target: Use generic cpu_model_from_type()Gavin Shan
Use generic cpu_model_from_type() when the CPU model name needs to be extracted from the CPU type name. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20231114235628.534334-23-gshan@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-01-05target/riscv: Use generic cpu_list()Gavin Shan
Before it's applied: [gshan@gshan q]$ ./build/qemu-system-riscv64 -cpu ? any max rv64 shakti-c sifive-e51 sifive-u54 thead-c906 veyron-v1 x-rv128 After it's applied: [gshan@gshan q]$ ./build/qemu-system-riscv64 -cpu ? Available CPUs: any max rv64 shakti-c sifive-e51 sifive-u54 thead-c906 veyron-v1 x-rv128 Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20231114235628.534334-18-gshan@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-01-05cpu: Call object_class_dynamic_cast() once in cpu_class_by_name()Philippe Mathieu-Daudé
For all targets, the CPU class returned from CPUClass::class_by_name() and object_class_dynamic_cast(oc, CPU_RESOLVING_TYPE) need to be compatible. Lets apply the check in cpu_class_by_name() for once, instead of having the check in CPUClass::class_by_name() for individual target. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Gavin Shan <gshan@redhat.com> Message-ID: <20231114235628.534334-4-gshan@redhat.com>
2023-12-29target/riscv: Constify VMState in machine.cRichard Henderson
Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-16-richard.henderson@linaro.org>
2023-12-23target/riscv/kvm: do not use non-portable strerrorname_np()Natanael Copa
strerrorname_np is non-portable and breaks building with musl libc. Use strerror(errno) instead, like we do other places. Cc: qemu-stable@nongnu.org Fixes: commit 082e9e4a58ba (target/riscv/kvm: improve 'init_multiext_cfg' error msg) Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2041 Buglink: https://gitlab.alpinelinux.org/alpine/aports/-/issues/15541 Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-12-04target/riscv/kvm: fix shadowing in kvm_riscv_(get|put)_regs_csrDaniel Henrique Barboza
KVM_RISCV_GET_CSR() and KVM_RISCV_SET_CSR() use an 'int ret' variable that is used to do an early 'return' if ret > 0. Both are being called in functions that are also declaring a 'ret' integer, initialized with '0', and this integer is used as return of the function. The result is that the compiler is less than pleased and is pointing shadowing errors: ../target/riscv/kvm/kvm-cpu.c: In function 'kvm_riscv_get_regs_csr': ../target/riscv/kvm/kvm-cpu.c:90:13: error: declaration of 'ret' shadows a previous local [-Werror=shadow=compatible-local] 90 | int ret = kvm_get_one_reg(cs, RISCV_CSR_REG(env, csr), &reg); \ | ^~~ ../target/riscv/kvm/kvm-cpu.c:539:5: note: in expansion of macro 'KVM_RISCV_GET_CSR' 539 | KVM_RISCV_GET_CSR(cs, env, sstatus, env->mstatus); | ^~~~~~~~~~~~~~~~~ ../target/riscv/kvm/kvm-cpu.c:536:9: note: shadowed declaration is here 536 | int ret = 0; | ^~~ ../target/riscv/kvm/kvm-cpu.c: In function 'kvm_riscv_put_regs_csr': ../target/riscv/kvm/kvm-cpu.c:98:13: error: declaration of 'ret' shadows a previous local [-Werror=shadow=compatible-local] 98 | int ret = kvm_set_one_reg(cs, RISCV_CSR_REG(env, csr), &reg); \ | ^~~ ../target/riscv/kvm/kvm-cpu.c:556:5: note: in expansion of macro 'KVM_RISCV_SET_CSR' 556 | KVM_RISCV_SET_CSR(cs, env, sstatus, env->mstatus); | ^~~~~~~~~~~~~~~~~ ../target/riscv/kvm/kvm-cpu.c:553:9: note: shadowed declaration is here 553 | int ret = 0; | ^~~ The macros are doing early returns for non-zero returns and the local 'ret' variable for both functions is used just to do 'return 0', so remove them from kvm_riscv_get_regs_csr() and kvm_riscv_put_regs_csr() and do a straight 'return 0' in the end. For good measure let's also rename the 'ret' variables in KVM_RISCV_GET_CSR() and KVM_RISCV_SET_CSR() to '_ret' to make them more resilient to these kind of errors. Fixes: 937f0b4512 ("target/riscv: Implement kvm_arch_get_registers") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231123101338.1040134-1-dbarboza@ventanamicro.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-22target/riscv/cpu_helper.c: Fix mxr bit behaviorIvan Klokov
According to RISCV Specification sect 9.5 on two stage translation when V=1 the vsstatus(mstatus in QEMU's terms) field MXR, which makes execute-only pages readable, only overrides VS-stage page protection. Setting MXR at HS-level(mstatus_hs), however, overrides both VS-stage and G-stage execute-only permissions. The hypervisor extension changes the behavior of MXR\MPV\MPRV bits. Due to RISCV Specification sect. 9.4.1 when MPRV=1, explicit memory accesses are translated and protected, and endianness is applied, as though the current virtualization mode were set to MPV and the current nominal privilege mode were set to MPP. vsstatus.MXR makes readable those pages marked executable at the VS translation stage. Fixes: 36a18664ba ("target/riscv: Implement second stage MMU") Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231121071757.7178-3-ivan.klokov@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-22target/riscv/cpu_helper.c: Invalid exception on MMU translation stageIvan Klokov
According to RISCV privileged spec sect. 5.3.2 Virtual Address Translation Process access-fault exceptions may raise only after PMA/PMP check. Current implementation generates an access-fault for mbare mode even if there were no PMA/PMP errors. This patch removes the erroneous MMU mode check and generates an access-fault exception based on the pmp_violation flag only. Fixes: 1448689c7b ("target/riscv: Allow specifying MMU stage") Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231121071757.7178-2-ivan.klokov@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-22target/riscv: don't verify ISA compatibility for zicntr and zihpmClément Chigot
The extensions zicntr and zihpm were officially added in the privilege instruction set specification 1.12. However, QEMU has been implemented them long before it and thus they are forced to be on during the cpu initialization to ensure compatibility (see riscv_cpu_init). riscv_cpu_disable_priv_spec_isa_exts was not updated when the above behavior was introduced, resulting in these extensions to be disabled after all. Signed-off-by: Clément Chigot <chigot@adacore.com> Fixes: c004099330 ("target/riscv: add zicntr extension flag for TCG") Fixes: 0824121660 ("target/riscv: add zihpm extension flag for TCG") Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231114123913.536194-1-chigot@adacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-15target/riscv/cpu.h: spelling fix: separatlyMichael Tokarev
Fixes: 40336d5b1d4c "target/riscv: Add HS-mode virtual interrupt and IRQ filtering support." Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-11-07hw/cpu: Call object_class_is_abstract() once in cpu_class_by_name()Philippe Mathieu-Daudé
Let CPUClass::class_by_name() handlers to return abstract classes, and filter them once in the public cpu_class_by_name() method. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230908112235.75914-3-philmd@linaro.org>
2023-11-07target: Move ArchCPUClass definition to 'cpu.h'Philippe Mathieu-Daudé
The OBJECT_DECLARE_CPU_TYPE() macro forward-declares each ArchCPUClass type. These forward declarations are sufficient for code in hw/ to use the QOM definitions. No need to expose these structure definitions. Keep each local to their target/ by moving them to the corresponding "cpu.h" header. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231013140116.255-13-philmd@linaro.org>
2023-11-07target/riscv: Use env_archcpu() in [check_]nanbox()Philippe Mathieu-Daudé
When CPUArchState* is available (here CPURISCVState*), we can use the fast env_archcpu() macro to get ArchCPU* (here RISCVCPU*). The QOM cast RISCV_CPU() macro will be slower when building with --enable-qom-cast-debug. Inspired-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20231009110239.66778-3-philmd@linaro.org>
2023-11-07target/riscv: Move TYPE_RISCV_CPU_BASE definition to 'cpu.h'Philippe Mathieu-Daudé
TYPE_RISCV_CPU_BASE depends on the TARGET_RISCV32/TARGET_RISCV64 definitions which are target specific. Such target specific definition taints "cpu-qom.h". Since "cpu-qom.h" must be target agnostic, remove its target specific definition uses by moving TYPE_RISCV_CPU_BASE to "target/riscv/cpu.h". "target/riscv/cpu-qom.h" is now fully target agnostic. Add a comment clarifying that in the header. Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231013140116.255-12-philmd@linaro.org>
2023-11-07target/riscv: Remove CPU_RESOLVING_TYPE from 'cpu-qom.h'Philippe Mathieu-Daudé
CPU_RESOLVING_TYPE is a per-target definition, and is irrelevant for other targets. Move it to "cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231013140116.255-6-philmd@linaro.org>
2023-11-07target: Unify QOM stylePhilippe Mathieu-Daudé
Enforce the style described by commit 067109a11c ("docs/devel: mention the spacing requirement for QOM"): The first declaration of a storage or class structure should always be the parent and leave a visual space between that declaration and the new code. It is also useful to separate backing for properties (options driven by the user) and internal state to make navigation easier. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20231013140116.255-2-philmd@linaro.org>
2023-11-07target/riscv: Add "pmu-mask" property to replace "pmu-num"Rob Bradford
Using a mask instead of the number of PMU devices supports the accurate emulation of platforms that have a discontinuous set of PMU counters. The "pmu-num" property now generates a warning when used by the user on the command line. Rather than storing the value for "pmu-num" convert it directly to the mask if it is specified (overwriting the default "pmu-mask" value) likewise the value is calculated from the mask if the property value is obtained. In the unusual situation that both "pmu-mask" and "pmu-num" are provided then then the order on the command line determines which takes precedence (later overwriting earlier.) Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231031154000.18134-5-rbradford@rivosinc.com> [Changes by AF - Fixup ext_zihpm logic after rebase ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Use existing PMU counter mask in FDT generationRob Bradford
During the FDT generation use the existing mask containing the enabled counters rather then generating a new one. Using the existing mask will support the use of discontinuous counters. Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20231031154000.18134-4-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Don't assume PMU counters are continuousRob Bradford
Check the PMU available bitmask when checking if a counter is valid rather than comparing the index against the number of PMUs. Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20231031154000.18134-3-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Propagate error from PMU setupRob Bradford
More closely follow the QEMU style by returning an Error and propagating it there is an error relating to the PMU setup. Further simplify the function by removing the num_counters parameter as this is available from the passed in cpu pointer. Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20231031154000.18134-2-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: cpu: Set the OpenTitan priv to 1.12.0Alistair Francis
Set the Ibex CPU priv to 1.12.0 to ensure that smepmp/epmp is correctly enabled. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231102003424.2003428-3-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Move vector crypto extensions to riscv_cpu_extensionsMax Chou
Because the vector crypto specification is ratified, so move theses extensions from riscv_cpu_experimental_exts to riscv_cpu_extensions. Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-11-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Expose Zvks[c|g] extnesion propertiesMax Chou
Expose the properties of ShangMi Algorithm Suite related extensions (Zvks, Zvksc, Zvksg). Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-10-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Add cfg properties for Zvks[c|g] extensionsMax Chou
Vector crypto spec defines the ShangMi algorithm suite related extensions (Zvks, Zvksc, Zvksg) combined by several vector crypto extensions. Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-9-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Expose Zvkn[c|g] extnesion propertiesMax Chou
Expose the properties of NIST Algorithm Suite related extensions (Zvkn, Zvknc, Zvkng). Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-8-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Add cfg properties for Zvkn[c|g] extensionsMax Chou
Vector crypto spec defines the NIST algorithm suite related extensions (Zvkn, Zvknc, Zvkng) combined by several vector crypto extensions. Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-7-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Expose Zvkb extension propertyMax Chou
Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-6-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Replace Zvbb checking by ZvkbMax Chou
The Zvkb extension is a proper subset of the Zvbb extension and includes following instructions: * vandn.[vv,vx] * vbrev8.v * vrev8.v * vrol.[vv,vx] * vror.[vv,vx,vi] Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-5-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Add cfg property for Zvkb extensionMax Chou
After vector crypto spec v1.0.0-rc3 release, the Zvkb extension is defined as a proper subset of the Zvbb extension. And both the Zvkn and Zvks shorthand extensions replace the included Zvbb extension by Zvkb extnesion. Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-4-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Expose Zvkt extension propertyMax Chou
Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-3-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Add cfg property for Zvkt extensionMax Chou
Vector crypto spec defines the Zvkt extension that included all of the instructions of Zvbb & Zvbc extensions and some vector instructions. Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231026151828.754279-2-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: correct csr_ops[CSR_MSECCFG]Heinrich Schuchardt
The CSR register mseccfg is used by multiple extensions: Smepm and Zkr. Consider this when checking the existence of the register. Fixes: 77442380ecbe ("target/riscv: rvk: add CSR support for Zkr") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231030102105.19501-1-heinrich.schuchardt@canonical.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv/kvm: add zicsr, zifencei, zba, zbs, svnapotDaniel Henrique Barboza
These regs were added in Linux 6.6. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231031205150.208405-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:19:17 +0000