aboutsummaryrefslogtreecommitdiff
path: root/target/riscv
AgeCommit message (Collapse)Author
2022-01-08target/riscv: support for 128-bit U-type instructionsFrédéric Pétrot
Adding the 128-bit version of lui and auipc, and introducing to that end a "set register with immediat" function to handle extension on 128 bits. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-12-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: support for 128-bit bitwise instructionsFrédéric Pétrot
The 128-bit bitwise instructions do not need any function prototype change as the functions can be applied independently on the lower and upper part of the registers. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-11-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: accessors to registers upper part and 128-bit load/storeFrédéric Pétrot
Get function to retrieve the 64 top bits of a register, stored in the gprh field of the cpu state. Set function that writes the 128-bit value at once. The access to the gprh field can not be protected at compile time to make sure it is accessed only in the 128-bit version of the processor because we have no way to indicate that the misa_mxl_max field is const. The 128-bit ISA adds ldu, lq and sq. We provide support for these instructions. Note that (a) we compute only 64-bit addresses to actually access memory, cowardly utilizing the existing address translation mechanism of QEMU, and (b) we assume for now little-endian memory accesses. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-10-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: moving some insns close to similar insnsFrédéric Pétrot
lwu and ld are functionally close to the other loads, but were after the stores in the source file. Similarly, xor was away from or and and by two arithmetic functions, while the immediate versions were nicely put together. This patch moves the aforementioned loads after lhu, and xor above or, where they more logically belong. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-9-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: setup everything for rv64 to support rv128 executionFrédéric Pétrot
This patch adds the support of the '-cpu rv128' option to qemu-system-riscv64 so that we can indicate that we want to run rv128 executables. Still, there is no support for 128-bit insns at that stage so qemu fails miserably (as expected) if launched with this option. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-8-frederic.petrot@univ-grenoble-alpes.fr [ Changed by AF - Rename CPU to "x-rv128" ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: array for the 64 upper bits of 128-bit registersFrédéric Pétrot
The upper 64-bit of the 128-bit registers have now a place inside the cpu state structure, and are created as globals for future use. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-7-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: separation of bitwise logic and arithmetic helpersFrédéric Pétrot
Introduction of a gen_logic function for bitwise logic to implement instructions in which no propagation of information occurs between bits and use of this function on the bitwise instructions. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-6-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: additional macros to check instruction supportFrédéric Pétrot
Given that the 128-bit version of the riscv spec adds new instructions, and that some instructions that were previously only available in 64-bit mode are now available for both 64-bit and 128-bit, we added new macros to check for the processor mode during translation. Although RV128 is a superset of RV64, we keep for now the RV64 only tests for extensions other than RVI and RVM. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-5-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08exec/memop: Adding signedness to quad definitionsFrédéric Pétrot
Renaming defines for quad in their various forms so that their signedness is now explicit. Done using git grep as suggested by Philippe, with a bit of hand edition to keep assignments aligned. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: Fix position of 'experimental' commentPhilipp Tomsich
When commit 0643c12e4b dropped the 'x-' prefix for Zb[abcs] and set them to be enabled by default, the comment about experimental extensions was kept in place above them. This moves it down a few lines to only cover experimental extensions. References: 0643c12e4b ("target/riscv: Enable bitmanip Zb[abcs] instructions") Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106134020.1628889-1-philipp.tomsich@vrull.eu Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: rvv-1.0: Call the correct RVF/RVD check function for narrowing ↵Frank Chang
fp/int type-convert insns vfncvt.f.xu.w, vfncvt.f.x.w convert double-width integer to single-width floating-point. Therefore, should use require_rvf() to check whether RVF/RVD is enabled. vfncvt.f.f.w, vfncvt.rod.f.f.w convert double-width floating-point to single-width integer. Therefore, should use require_scale_rvf() to check whether RVF/RVD is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220105022247.21131-4-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: rvv-1.0: Call the correct RVF/RVD check function for widening ↵Frank Chang
fp/int type-convert insns vfwcvt.xu.f.v, vfwcvt.x.f.v, vfwcvt.rtz.xu.f.v and vfwcvt.rtz.x.f.v convert single-width floating-point to double-width integer. Therefore, should use require_rvf() to check whether RVF/RVD is enabled. vfwcvt.f.xu.v, vfwcvt.f.x.v convert single-width integer to double-width floating-point, and vfwcvt.f.f.v convert double-width floating-point to single-width floating-point. Therefore, should use require_scale_rvf() to check whether RVF/RVD is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220105022247.21131-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: rvv-1.0: Call the correct RVF/RVD check function for widening ↵Frank Chang
fp insns Vector widening floating-point instructions should use require_scale_rvf() instead of require_rvf() to check whether RVF/RVD is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220105022247.21131-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: Enable the Hypervisor extension by defaultAlistair Francis
Let's enable the Hypervisor extension by default. This doesn't affect named CPUs (such as lowrisc-ibex or sifive-u54) but does enable the Hypervisor extensions by default for the virt machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220105213937.1113508-7-alistair.francis@opensource.wdc.com>
2022-01-08target/riscv: Mark the Hypervisor extension as non experimentalAlistair Francis
The Hypervisor spec is now frozen, so remove the experimental tag. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220105213937.1113508-6-alistair.francis@opensource.wdc.com>
2022-01-08target/riscv/pmp: fix no pmp illegal intrsNikita Shubin
As per the privilege specification, any access from S/U mode should fail if no pmp region is configured and pmp is present, othwerwise access should succeed. Fixes: d102f19a208 (target/riscv/pmp: Raise exception if no PMP entry is configured) Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211214092659.15709-1-nikita.shubin@maquefel.me Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: Enable bitmanip Zb[abcs] instructionsVineet Gupta
The bitmanip extension has now been ratified [1] and upstream tooling (gcc/binutils) support it too, so move them out of experimental and also enable by default (for better test exposure/coverage) [1] https://wiki.riscv.org/display/TECH/Recently+Ratified+Extensions Signed-off-by: Vineet Gupta <vineetg@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211216051844.3921088-1-vineetg@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing instructionsFrank Chang
SEW has the limitation which cannot exceed ELEN. Widening instructions have a destination group with EEW = 2*SEW and narrowing instructions have a source operand with EEW = 2*SEW. Both of the instructions have the limitation of: 2*SEW <= ELEN. Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-78-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: update opivv_vadc_check() commentFrank Chang
Vector Integer Add-with-Carry / Subtract-with-Borrow Instructions is moved to Section 11.4 in RVV v1.0 spec. Update the comment, no functional changes. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-77-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm and ↵Frank Chang
vmorn.mm Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-76-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: add vector unit-stride mask load/store insnsFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-75-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: add evl parameter to vext_ldst_us()Frank Chang
Add supports of Vector unit-stride mask load/store instructions (vlm.v, vsm.v), which has: evl (effective vector length) = ceil(env->vl / 8). The new instructions operate the same as unmasked byte loads and stores. Add evl parameter to reuse vext_ldst_us(). Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-74-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: add vsetivli instructionFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-73-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11Frank Chang
Rename r2_zimm to r2_zimm11 for the upcoming vsetivli instruction. vsetivli has 10-bits of zimm but vsetvli has 11-bits of zimm. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-72-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: floating-point reciprocal estimate instructionFrank Chang
Implement the floating-point reciprocal estimate to 7 bits instruction. Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-71-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: floating-point reciprocal square-root estimate ↵Frank Chang
instruction Implement the floating-point reciprocal square-root estimate to 7 bits instruction. Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-70-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: gdb: support vector registers for rv64 & rv32Hsiangkai Wang
Signed-off-by: Hsiangkai Wang <kai.wang@sifive.com> Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-69-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: trigger illegal instruction exception if frm is not validFrank Chang
If the frm field contains an invalid rounding mode (101-111), attempting to execute any vector floating-point instruction, even those that do not depend on the rounding mode, will raise an illegal instruction exception. Call gen_set_rm() with DYN rounding mode to check and trigger illegal instruction exception if frm field contains invalid value at run-time for vector floating-point instructions. Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-68-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: implement vstart CSRFrank Chang
* Update and check vstart value for vector instructions. * Add whole register move instruction helper functions as we have to call helper function for case where vstart is not zero. * Remove probe_pages() calls in vector load/store instructions (except fault-only-first loads) to raise the memory access exception at the exact processed vector element. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-67-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bitsFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-66-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: narrowing floating-point/integer type-convertFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-65-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: add "set round to odd" rounding mode helper functionFrank Chang
helper_set_rounding_mode() is responsible for SIGILL, and "round to odd" should be an interface private to translation, so add a new independent helper_set_rod_rounding_mode(). Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-64-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: widening floating-point/integer type-convertFrank Chang
Add the following instructions: * vfwcvt.rtz.xu.f.v * vfwcvt.rtz.x.f.v Also adjust GEN_OPFV_WIDEN_TRANS() to accept multiple floating-point rounding modes. Signed-off-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-63-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: floating-point/integer type-convert instructionsFrank Chang
Add the following instructions: * vfcvt.rtz.xu.f.v * vfcvt.rtz.x.f.v Also adjust GEN_OPFV_TRANS() to accept multiple floating-point rounding modes. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-62-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: introduce floating-point rounding mode enumFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-61-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: floating-point min/max instructionsFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-60-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: remove integer extract instructionFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-59-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: remove vmford.vv and vmford.vfFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-58-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: remove widening saturating scaled multiply-addFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-57-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: single-width scaling shift instructionsFrank Chang
log(SEW) truncate vssra.vi immediate value. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-56-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: widening floating-point reduction instructionsFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-55-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: single-width floating-point reductionFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-54-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: narrowing fixed-point clip instructionsFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-53-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: floating-point slide instructionsFrank Chang
Add the following instructions: * vfslide1up.vf * vfslide1down.vf Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211210075704.23951-52-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: slide instructionsFrank Chang
* Remove clear function from helper functions as the tail elements are unchanged in RVV 1.0. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-51-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: mask-register logical instructionsFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-50-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: floating-point compare instructionsFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-49-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: integer comparison instructionsFrank Chang
* Sign-extend vmselu.vi and vmsgtu.vi immediate values. * Remove "set tail elements to zeros" as tail elements can be unchanged for either VTA to have undisturbed or agnostic setting. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-48-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: single-width saturating add and subtract instructionsFrank Chang
Sign-extend vsaddu.vi immediate value. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-47-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20target/riscv: rvv-1.0: widening integer multiply-add instructionsFrank Chang
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211210075704.23951-46-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:19:10 +0000