aboutsummaryrefslogtreecommitdiff
path: root/target/riscv
AgeCommit message (Collapse)Author
2018-11-13RISC-V: Respect fences for user-only emulatorsPalmer Dabbelt
Our current fence implementation ignores fences for the user-only configurations. This is incorrect but unlikely to manifest: it requires multi-threaded user-only code that takes advantage of the weakness in the host's memory model and can be inlined by TCG. This patch simply treats fences the same way for all our emulators. I've given it to testing as I don't want to construct a test that would actually trigger the failure. Our fence implementation has an additional deficiency where we map all RISC-V fences to full fences. Now that we have a formal memory model for RISC-V we can start to take advantage of the strength bits on our fence instructions. This requires a bit more though, so I'm going to split it out because the implementation is still correct without taking advantage of these weaker fences. Thanks to Richard Henderson for pointing out both of the issues. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-11-13target/riscv: Fix sfence.vm/a both available in any priv versionBastian Koppelmann
sfence.vm has been replaced in priv v1.10 spec by sfence.vma. Reported-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-13target/riscv: Fix FCLASS_D being treated as RV64 onlyBastian Koppelmann
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-30target/riscv/pmp.c: pmpcfg_csr_read returns bogus value on RV64Dayeol Lee
pmp_read_cfg() returns 8-bit value, which is combined together to form a single pmpcfg CSR. The default promotion rules will result in an integer here ("i*8" is integer, which flows through) resulting in a 32-bit signed value on most hosts. That's bogus on RV64I, with the high bits of the CSR being wrong. Signed-off-by: Dayeol Lee <dayeol@berkeley.edu> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Update CSR and interrupt definitionsMichael Clark
* Add user-mode CSR defininitions. * Reorder CSR definitions to match the specification. * Change H mode interrupt comment to 'reserved'. * Remove unused X_COP interrupt. * Add user-mode interrupts. * Remove erroneous until comments on machine mode interrupts. * Move together paging mode and page table bit definitions. * Move together interrupt and exception cause definitions. Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Move non-ops from op_helper to cpu_helperMichael Clark
This patch makes op_helper.c contain only instruction operation helpers used by translate.c and moves any unrelated cpu helpers into cpu_helper.c. No logic is changed by this patch. Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Allow setting and clearing multiple irqsMichael Clark
Change the API of riscv_set_local_interrupt to take a write mask and value to allow setting and clearing of multiple local interrupts atomically in a single call. Rename the new function to riscv_cpu_update_mip. Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-09-05riscv: remove define cpu_init()Igor Mammedov
cpu_init() was removed since 2.12, so drop the define that is now unused. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-09-05target/riscv: call gen_goto_tb on DISAS_TOO_MANYEmilio G. Cota
Performance impact of this and the previous commits, measured with the very-easy-to-cross-compile rv8-bench: https://github.com/rv8-io/rv8-bench Host: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz - Key: before: master after1,2,3: the 3 commits in this series (i.e. 3 is this commit) - User-mode: bench before after1 after2 after3 final speedup --------------------------------------------------------- aes 1.12s 1.12s 1.10s 1.00s 1.12 bigint 0.78s 0.78s 0.78s 0.78s 1 dhrystone 0.96s 0.97s 0.49s 0.49s 1.9591837 miniz 1.94s 1.94s 1.88s 1.86s 1.0430108 norx 0.51s 0.51s 0.49s 0.48s 1.0625 primes 0.85s 0.85s 0.84s 0.84s 1.0119048 qsort 4.87s 4.88s 1.86s 1.86s 2.6182796 sha512 0.76s 0.77s 0.64s 0.64s 1.1875 (after1 only applies to softmmu, so no surprises here) - Full-system (fedora): bench before after1 after2 after3 final speedup --------------------------------------------------------- aes 2.68s 2.54s 2.60s 2.34s 1.1452991 bigint 1.61s 1.56s 1.55s 1.64s 0.98170732 dhrystone 1.78s 1.67s 1.25s 1.24s 1.4354839 miniz 3.53s 3.35s 3.28s 3.35s 1.0537313 norx 1.13s 1.09s 1.07s 1.06s 1.0660377 primes 15.37s 15.41s 15.20s 15.37s 1 qsort 7.20s 6.71s 3.85s 3.96s 1.8181818 sha512 1.07s 1.04s 0.90s 0.90s 1.1888889 SoftMMU slows things down, so the numbers are less sensitive. Cross-page jumps improve things a little bit, though. Note that I'm not showing here averages, just results from a single run, so with primes there isn't much to worry about. Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-09-05target/riscv: optimize indirect branchesEmilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-09-05target/riscv: optimize cross-page direct jumps in softmmuEmilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-09-04RISC-V: Simplify riscv_cpu_local_irqs_pendingMichael Clark
This commit is intended to improve readability. There is no change to the logic. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-09-04RISC-V: Improve page table walker spec complianceMichael Clark
- Inline PTE_TABLE check for better readability - Change access checks from ternary operator to if - Improve readibility of User page U mode and SUM test - Disallow non U mode from fetching from User pages - Add reserved PTE flag check: W or W|X - Add misaligned PPN check - Set READ protection for PTE X flag and mstatus.mxr - Use memory_region_is_ram in pte update Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-09-04RISC-V: Update address bits to support sv39 and sv48Michael Clark
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-06-08RISC-V: Add trailing '\n' to qemu_log() callsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-11-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01tcg: Pass tb and index to tcg_gen_exit_tb separatelyRichard Henderson
Do the cast to uintptr_t within the helper, so that the compiler can type check the pointer argument. We can also do some more sanity checking of the index argument. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-31Make address_space_translate{, _cached}() take a MemTxAttrs argumentPeter Maydell
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_translate() and address_space_translate_cached(). Callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-4-peter.maydell@linaro.org
2018-05-18target/riscv: Honor CPU_DUMP_FPURichard Henderson
Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Michael Clark <mjc@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17target/riscv: Remove floatX_maybe_silence_nan from conversionsRichard Henderson
This is now handled properly by the generic softfloat code. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Michael Clark <mjc@sifive.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-11Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180510' into staging target-arm queue: * hw/arm/iotkit.c: fix minor memory leak * softfloat: fix wrong-exception-flags bug for multiply-add corner case * arm: isolate and clean up DTB generation * implement Arm v8.1-Atomics extension * Fix some bugs and missing instructions in the v8.2-FP16 extension # gpg: Signature made Thu 10 May 2018 18:44:34 BST # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits) target/arm: Clear SVE high bits for FMOV target/arm: Fix float16 to/from int16 target/arm: Implement vector shifted FCVT for fp16 target/arm: Implement vector shifted SCVF/UCVF for fp16 target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only target/arm: Implement CAS and CASP target/arm: Fill in disas_ldst_atomic target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode target/riscv: Use new atomic min/max expanders tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add tcg: Introduce atomic helpers for integer min/max target/xtensa: Use new min/max expanders target/arm: Use new min/max expanders tcg: Introduce helpers for integer min/max atomic.h: Work around gcc spurious "unused value" warning make sure that we aren't overwriting mc->get_hotplug_handler by accident arm/boot: split load_dtb() from arm_load_kernel() platform-bus-device: use device plug callback instead of machine_done notifier pc: simplify MachineClass::get_hotplug_handler handling softfloat: Handle default NaN mode after pickNaNMulAdd, not before ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # target/riscv/translate.c
2018-05-10target/riscv: Use new atomic min/max expandersRichard Henderson
Reviewed-by: Michael Clark <mjc@sifive.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180508151437.4232-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-09target/riscv: convert to TranslatorOpsEmilio G. Cota
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Clark <mjc@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09target/riscv: convert to DisasContextBaseEmilio G. Cota
Notes: - Did not convert {num,max}_insns, since the corresponding code will go away in the next patch. - ctx->pc becomes ctx->base.pc_next, and ctx->next_pc becomes ctx->pc_succ_insn. While at it, convert the remaining tb->cflags readers to tb_cflags(). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Michael Clark <mjc@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09target/riscv: convert to DisasJumpTypeEmilio G. Cota
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Michael Clark <mjc@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09target/riscv: avoid integer overflow in next_page PC checkEmilio G. Cota
If the PC is in the last page of the address space, next_page_start overflows to 0. Fix it. Reported-by: Richard Henderson <richard.henderson@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Clark <mjc@sifive.com> Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Michael Clark <mjc@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-06RISC-V: No traps on writes to misa,minstret,mcycleMichael Clark
These fields are marked WARL (Write Any Values, Reads Legal Values) in the RISC-V Privileged Architecture Specification so instead of raising exceptions, illegal writes are silently dropped. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-05-06RISC-V: Make mtvec/stvec ignore vectored trapsMichael Clark
Vectored traps for asynchrounous interrupts are optional. The mtvec/stvec mode field is WARL and hence does not trap if an illegal value is written. Illegal values are ignored. Later we can add RISCV_FEATURE_VECTORED_TRAPS however until then the correct behavior for WARL (Write Any, Read Legal) fields is to drop writes to unsupported bits. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-05-06RISC-V: Add mcycle/minstret support for -icount autoMichael Clark
Previously the mycycle/minstret CSRs and rdcycle/rdinstret psuedo instructions would return the time as a proxy for an increasing instruction counter in the absence of having a precise instruction count. If QEMU is invoked with -icount, the mcycle/minstret CSRs and rdcycle/rdinstret psuedo instructions will return the instruction count. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Use [ms]counteren CSRs when priv ISA >= v1.10Michael Clark
Privileged ISA v1.9.1 defines mscounteren and mucounteren: * mscounteren contains a mask of counters available to S-mode * mucounteren contains a mask of counters available to U-mode Privileged ISA v1.10 defines mcounteren and scounteren: * mcounteren contains a mask of counters available to S-mode * scounteren contains a mask of counters available to U-mode mcounteren and scounteren CSR registers were implemented however they were not honoured for counter accesses when the privilege ISA was >= v1.10. This fix solves the issue by coalescing the counter enable registers. In addition the code now generates illegal instruction exceptions for accesses to the counter enabled registers depending on the privileged ISA version. - Coalesce mscounteren and mcounteren into one variable - Coalesce mucounteren and scounteren into one variable - Makes mcounteren and scounteren CSR accesses generate illegal instructions when the privileged ISA <= v1.9.1 - Makes mscounteren and mucounteren CSR accesses generate illegal instructions when the privileged ISA >= v1.10 Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-05-06RISC-V: Allow S-mode mxr access when priv ISA >= v1.10Michael Clark
The mstatus.MXR alias in sstatus should only be writable by S-mode if the privileged ISA version >= v1.10. Also MXR was masked in sstatus CSR read but not sstatus CSR writes. Now we correctly mask sstatus.mxr in both read and write. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Clear mtval/stval on exceptions without infoMichael Clark
mtval/stval must be set on all exceptions but zero is a legal value if there is no exception specific info. Placing the instruction bytes for illegal instruction exceptions in mtval/stval is an optional feature and is currently not supported by QEMU RISC-V. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Hardwire satp to 0 for no-mmu caseMichael Clark
satp is WARL so it should not trap on illegal writes, rather it can be hardwired to zero and silently ignore illegal writes. It seems the RISC-V WARL behaviour is preferred to having to trap overhead versus simply reading back the value and checking if the write took (saves hundreds of cycles and more complex trap handling code). Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Update E and I extension orderMichael Clark
Section 22.8 Subset Naming Convention of the RISC-V ISA Specification defines the canonical order for extensions in the ISA string. It is silent on the position of the E extension however E is a substitute for I so it must come early in the extension list order. A comment is added to state E and I are mutually exclusive, as the E extension will be added to the RISC-V port in the future. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Remove erroneous comment from translate.cMichael Clark
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Remove EM_RISCV ELF_MACHINE indirectionMichael Clark
Pointless indirection. Other ports use EM_ constants directly. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-03-29RISC-V: Workaround for critical mstatus.FS bugMichael Clark
This change is a workaround for a bug where mstatus.FS is not correctly reporting dirty after operations that modify floating point registers. This a critical bug or RISC-V in QEMU as it results in floating point register file corruption when running SMP Linux due to task migration and possibly uniprocessor Linux if more than one process is using the FPU. This workaround will return dirty if mstatus.FS is switched from off to initial or clean. According to the specification it is legal for an implementation to return only off, or dirty. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-28RISC-V: Convert cpu definition to future modelMichael Clark
- Model borrowed from target/sh4/cpu.c - Rewrote riscv_cpu_list to use object_class_get_list - Dropped 'struct RISCVCPUInfo' and used TypeInfo array - Replaced riscv_cpu_register_types with DEFINE_TYPES - Marked base class as abstract - Fixes -cpu list Cc: Igor Mammedov <imammedo@redhat.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2018-03-20Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine and x86 queue, 2018-03-19 * cpu_model/cpu_type cleanups * x86: Fix on Intel Processor Trace CPUID checks # gpg: Signature made Mon 19 Mar 2018 20:07:14 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: i386: Disable Intel PT if packets IP payloads have LIP values cpu: drop unnecessary NULL check and cpu_common_class_by_name() cpu: get rid of unused cpu_init() defines Use cpu_create(type) instead of cpu_init(cpu_model) cpu: add CPU_RESOLVING_TYPE macro tests: add machine 'none' with -cpu test nios2: 10m50_devboard: replace cpu_model with cpu_type Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-20RISC-V: Fix riscv_isa_string memory size bugMichael Clark
This version uses a constant size memory buffer sized for the maximum possible ISA string length. It also uses g_new instead of g_new0, uses more efficient logic to append extensions and adds manual zero termination of the string. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMM: Use qemu_tolower() rather than tolower()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-19cpu: add CPU_RESOLVING_TYPE macroIgor Mammedov
it will be used for providing to cpu name resolving class for parsing cpu model for system and user emulation code. Along with change add target to null-machine tests, so that when switch to CPU_RESOLVING_TYPE happens, it would ensure that null-machine usecase still works. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k) Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc) Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore) Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: Added macro to riscv too] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-07RISC-V Build InfrastructureMichael Clark
This adds RISC-V into the build system enabling the following targets: - riscv32-softmmu - riscv64-softmmu - riscv32-linux-user - riscv64-linux-user This adds defaults configs for RISC-V, enables the build for the RISC-V CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh' script is updated to add the RISC-V ELF magic. Expected checkpatch errors for consistency reasons: ERROR: line over 90 characters FILE: scripts/qemu-binfmt-conf.sh Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V Linux User EmulationMichael Clark
Implementation of linux user emulation for RISC-V. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V Physical Memory ProtectionMichael Clark
Implements the physical memory protection extension as specified in Privileged ISA Version 1.10. PMP (Physical Memory Protection) is as-of-yet unused and needs testing. The SiFive verification team have PMP test cases that will be run. Nothing currently depends on PMP support. It would be preferable to keep the code in-tree for folk that are interested in RISC-V PMP support. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daire McNamara <daire.mcnamara@emdalo.com> Signed-off-by: Ivan Griffin <ivan.griffin@emdalo.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V TCG Code GenerationMichael Clark
TCG code generation for the RV32IMAFDC and RV64IMAFDC. The QEMU RISC-V code generator has complete coverage for the Base ISA v2.2, Privileged ISA v1.9.1 and Privileged ISA v1.10: - RISC-V Instruction Set Manual Volume I: User-Level ISA Version 2.2 - RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.9.1 - RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.10 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V GDB StubMichael Clark
GDB Register read and write routines. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V FPU SupportMichael Clark
Helper routines for FPU instructions and NaN definitions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V CPU HelpersMichael Clark
Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V CPU Core DefinitionMichael Clark
Add CPU state header, CPU definitions and initialization routines Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-05 23:01:52 +0000