aboutsummaryrefslogtreecommitdiff
path: root/target/riscv/op_helper.c
AgeCommit message (Collapse)Author
2023-07-10target/riscv: Make MPV only work when MPP != PRV_MWeiwei Li
Upon MRET or explicit memory access with MPRV=1, MPV should be ignored when MPP=PRV_M. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230603134236.15719-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Check SUM in the correct registerRichard Henderson
Table 9.5 "Effect of MPRV..." specifies that MPV=1 uses VS-level vsstatus.SUM instead of HS-level sstatus.SUM. For HLV/HSV instructions, the HS-level register does not apply, but the VS-level register presumably does, though this is not mentioned explicitly in the manual. However, it matches the behavior for MPV. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-18-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-18-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Move hstatus.spvp check to check_access_hlsvRichard Henderson
The current cpu_mmu_index value is really irrelevant to the HLV/HSV lookup. Provide the correct priv level directly. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-16-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-16-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Rename MMU_HYP_ACCESS_BIT to MMU_2STAGE_BITRichard Henderson
We will enable more uses of this bit in the future. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-12-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-12-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Handle HLV, HSV via helpersRichard Henderson
Implement these instructions via helpers, in expectation of determining the mmu_idx to use at runtime. This allows the permission check to also be moved out of line, which allows HLSX to be removed from TB_FLAGS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Use cpu_ld*_code_mmu for HLVXRichard Henderson
Use the new functions to properly check execute permission for the read rather than read permission. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-10-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-10-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Reduce overhead of MSTATUS_SUM changeFei Wu
Kernel needs to access user mode memory e.g. during syscalls, the window is usually opened up for a very limited time through MSTATUS.SUM, the overhead is too much if tlb_flush() gets called for every SUM change. This patch creates a separate MMU index for S+SUM, so that it's not necessary to flush tlb anymore when SUM changes. This is similar to how ARM handles Privileged Access Never (PAN). Result of 'pipe 10' from unixbench boosts from 223656 to 1705006. Many other syscalls benefit a lot from this too. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fei Wu <fei2.wu@intel.com> Message-Id: <20230324054154.414846-3-fei2.wu@intel.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-8-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-8-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: fix H extension TVM trapYi Chen
- Trap satp/hgatp accesses from HS-mode when MSTATUS.TVM is enabled. - Trap satp accesses from VS-mode when HSTATUS.VTVM is enabled. - Raise RISCV_EXCP_ILLEGAL_INST when U-mode executes SFENCE.VMA/SINVAL.VMA. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes SFENCE.VMA/SINVAL.VMA or VS-mode executes SFENCE.VMA/SINVAL.VMA with HSTATUS.VTVM enabled. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes HFENCE.GVMA/HFENCE.VVMA/HINVAL.GVMA/HINVAL.VVMA. Signed-off-by: Yi Chen <chenyi2000@zju.edu.cn> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406101559.39632-1-chenyi2000@zju.edu.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Use PRV_RESERVED instead of PRV_HWeiwei Li
PRV_H has no real meaning, but just a reserved privilege mode currently. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230407014743.18779-3-liweiwei@iscas.ac.cn> [ Changes by AF: - Convert one missing use of PRV_H ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Fix the mstatus.MPP value after executing MRETWeiwei Li
The MPP will be set to the least-privileged supported mode (U if U-mode is implemented, else M). Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230407014743.18779-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Fix format for indentationWeiwei Li
Fix identation problems, and try to use the same indentation strategy in the same file. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Remove riscv_cpu_virt_enabled()Weiwei Li
Directly use env->virt_enabled instead. Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Remove redundant check on RVHWeiwei Li
Check on riscv_cpu_virt_enabled contains the check on RVH. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230327080858.39703-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-03-05target/riscv: implement Zicbom extensionChristoph Muellner
Zicbom is the Cache-Block Management extension defined in the already ratified RISC-V Base Cache Management Operation (CBO) ISA extension [1]. The extension contains three instructions: cbo.clean, cbo.flush and cbo.inval. All of them must be implemented in the same group as LQ and cbo.zero due to overlapping patterns. All these instructions can throw a Illegal Instruction/Virtual Instruction exception, similar to the existing cbo.zero. The same check_zicbo_envcfg() is used to handle these exceptions. Aside from that, these instructions also need to handle page faults and guest page faults. This is done in a new check_zicbom_access() helper. As with Zicboz, the cache block size for Zicbom is also configurable. Note that the spec determines that Zicbo[mp] and Zicboz can have different cache sizes (Section 2.7 of [1]), so we also include a 'cbom_blocksize' to go along with the existing 'cboz_blocksize'. They are set to the same size, so unless users want to play around with the settings both sizes will be the same. [1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Signed-off-by: Christoph Muellner <cmuellner@linux.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230224132536.552293-4-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-05target/riscv: implement Zicboz extensionChristoph Muellner
The RISC-V base cache management operation (CBO) ISA extension has been ratified. It defines three extensions: Cache-Block Management, Cache-Block Prefetch and Cache-Block Zero. More information about the spec can be found at [1]. Let's start by implementing the Cache-Block Zero extension, Zicboz. It uses the cbo.zero instruction that, as with all CBO instructions that will be added later, needs to be implemented in an overlap group with the LQ instruction due to overlapping patterns. cbo.zero throws a Illegal Instruction/Virtual Instruction exception depending on CSR state. This is also the case for the remaining cbo instructions we're going to add next, so create a check_zicbo_envcfg() that will be used by all Zicbo[mz] instructions. [1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Signed-off-by: Christoph Muellner <cmuellner@linux.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv: remove RISCV_FEATURE_PMPDaniel Henrique Barboza
RISCV_FEATURE_PMP is being set via riscv_set_feature() by mirroring the cpu->cfg.pmp flag. Use the flag instead. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20230222185205.355361-8-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-07RISC-V: Adding XTheadSync ISA extensionChristoph Müllner
This patch adds support for the XTheadSync ISA extension. The patch uses the T-Head specific decoder and translation. The implementation introduces a helper to execute synchronization tasks: helper_tlb_flush_all() performs a synchronized TLB flush on all CPUs. Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-3-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+Bin Meng
Since priv spec v1.12, MRET and SRET now clear mstatus.MPRV when leaving M-mode. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221207090037.281452-2-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06target/riscv: Simplify helper_sret() a little bitBin Meng
There are 2 paths in helper_sret() and the same mstatus update codes are replicated. Extract the common parts to simplify it a little bit. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221207090037.281452-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06target/riscv: Fix mret exception cause when no pmp rule is configuredBin Meng
The priv spec v1.12 says: If no PMP entry matches an M-mode access, the access succeeds. If no PMP entry matches an S-mode or U-mode access, but at least one PMP entry is implemented, the access fails. Failed accesses generate an instruction, load, or store access-fault exception. At present the exception cause is set to 'illegal instruction' but should have been 'instruction access fault'. Fixes: d102f19a2085 ("target/riscv/pmp: Raise exception if no PMP entry is configured") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221205065303.204095-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29target/riscv: rvk: add CSR support for ZkrWeiwei Li
- add SEED CSR which must be accessed with a read-write instruction: A read-only instruction such as CSRRS/CSRRC with rs1=x0 or CSRRSI/CSRRCI with uimm=0 will raise an illegal instruction exception. - add USEED, SSEED fields for MSECCFG CSR Co-authored-by: Ruibo Lu <luruibo2000@163.com> Co-authored-by: Zewen Ye <lustrew@foxmail.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220423023510.30794-13-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-21compiler.h: replace QEMU_NORETURN with G_NORETURNMarc-André Lureau
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in glib-compat. Note that this attribute must be placed before the function declaration (bringing a bit of consistency in qemu codebase usage). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Warner Losh <imp@bsdimp.com> Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
2022-01-21target/riscv: Adjust csr write mask with XLENLIU Zhiwei
Write mask is representing the bits we care about. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220120122050.41546-11-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21target/riscv: Don't save pc when exception returnLIU Zhiwei
As pc will be written by the xepc in exception return, just ignore pc in translation. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220120122050.41546-3-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: helper functions to wrap calls to 128-bit csr insnsFrédéric Pétrot
Given the side effects they have, the csr instructions are realized as helpers. We extend this existing infrastructure for 128-bit sized csr. We return 128-bit values using the same approach as for div/rem. Theses helpers all call a unique function that is currently a fallback on the 64-bit version. The trans_csrxx functions supporting 128-bit are yet to be implemented. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-17-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv/pmp: fix no pmp illegal intrsNikita Shubin
As per the privilege specification, any access from S/U mode should fail if no pmp region is configured and pmp is present, othwerwise access should succeed. Fixes: d102f19a208 (target/riscv/pmp: Raise exception if no PMP entry is configured) Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211214092659.15709-1-nikita.shubin@maquefel.me Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01target/riscv: Reorg csr instructionsRichard Henderson
Introduce csrr and csrw helpers, for read-only and write-only insns. Note that we do not properly implement this in riscv_csrrw, in that we cannot distinguish true read-only (rs1 == 0) from any other zero write_mask another source register -- this should still raise an exception for read-only registers. Only issue gen_io_start for CF_USE_ICOUNT. Use ctx->zero for csrrc. Use get_gpr and dest_gpr. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210823195529.560295-19-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08target/riscv: fix wfi exception behaviorJose Martins
The wfi exception trigger behavior should take into account user mode, hstatus.vtw, and the fact the an wfi might raise different types of exceptions depending on various factors: If supervisor mode is not present: - an illegal instruction exception should be generated if user mode executes and wfi instruction and mstatus.tw = 1. If supervisor mode is present: - when a wfi instruction is executed, an illegal exception should be triggered if either the current mode is user or the mode is supervisor and mstatus.tw is set. Plus, if the hypervisor extensions are enabled: - a virtual instruction exception should be raised when a wfi is executed from virtual-user or virtual-supervisor and hstatus.vtw is set. Signed-off-by: Jose Martins <josemartins90@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210420213656.85148-1-josemartins90@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11target/riscv: Use RISCVException enum for CSR accessAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 302b208f40373557fa11b351b5c9f43039ca8ea3.1617290165.git.alistair.francis@wdc.com
2021-05-02hw: Do not include qemu/log.h if it is not necessaryThomas Huth
Many files include qemu/log.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210328054833.2351597-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-01-16target/riscv/pmp: Raise exception if no PMP entry is configuredAtish Patra
As per the privilege specification, any access from S/U mode should fail if no pmp region is configured. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201223192553.332508-1-atish.patra@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-09target/riscv: Split the Hypervisor execute load helpersAlistair Francis
Split the hypervisor execute load functions into two seperate functions. This avoids us having to pass the memop to the C helper functions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 5b1550f0faa3c435cc77f3c1ae811dea98ab9e36.1604464950.git.alistair.francis@wdc.com
2020-11-09target/riscv: Remove the hyp load and store functionsAlistair Francis
Remove the special Virtulisation load and store functions and just use the standard tcg tcg_gen_qemu_ld_tl() and tcg_gen_qemu_st_tl() functions instead. As part of this change we ensure we still run an access check to make sure we can perform the operations. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 189ac3e53ef2854824d18aad7074c6649f17de2c.1604464950.git.alistair.francis@wdc.com
2020-11-09target/riscv: Remove the HS_TWO_STAGE flagAlistair Francis
The HS_TWO_STAGE flag is no longer required as the MMU index contains the information if we are performing a two stage access. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: f514b128b1ff0fb41c85f914cee18f905007a922.1604464950.git.alistair.francis@wdc.com
2020-11-09target/riscv: Set the virtualised MMU mode when doing hyp accessesAlistair Francis
When performing the hypervisor load/store operations set the MMU mode to indicate that we are virtualised. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: e411c61a1452cad16853f13cac2fb86dc91ebee8.1604464950.git.alistair.francis@wdc.com
2020-11-03target/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unitYifei Jiang
mstatus/mstatush and vsstatus/vsstatush are two halved for RISCV32. This patch expands mstatus and vsstatus to uint64_t instead of target_ulong so that it can be saved as one unit and reduce some ifdefs in the code. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-2-jiangyifei@huawei.com
2020-10-22target/riscv: Fix implementation of HLVX.WU instructionGeorg Kotheimer
The HLVX.WU instruction is supposed to read a machine word, but prior to this change it read a byte instead. Fixes: 8c5362acb57 ("target/riscv: Allow generating hlv/hlvx/hsv instructions") Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201013172223.443645-1-georg.kotheimer@kernkonzept.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-22riscv: Convert interrupt logs to use qemu_log_mask()Alistair Francis
Currently we log interrupts and exceptions using the trace backend in riscv_cpu_do_interrupt(). We also log exceptions using the interrupt log mask (-d int) in riscv_raise_exception(). This patch converts riscv_cpu_do_interrupt() to log both interrupts and exceptions with the interrupt log mask, so that both are printed when a user runs QEMU with -d int. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 29a8c766c7c4748d0f2711c3a0abb81208138c5e.1601652179.git.alistair.francis@wdc.com
2020-08-25target/riscv: Support the Virtual Instruction faultAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com Message-Id: <4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com>
2020-08-25target/riscv: Return the exception from invalid CSR accessesAlistair Francis
When performing a CSR access let's return a negative exception value on an error instead of -1. This will allow us to specify the exception in future patches. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com Message-Id: <a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com>
2020-08-25target/riscv: Update the Hypervisor trap return/entryAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: e7e4e801234f2934306e734f65860f601a5745bd.1597259519.git.alistair.francis@wdc.com Message-Id: <e7e4e801234f2934306e734f65860f601a5745bd.1597259519.git.alistair.francis@wdc.com>
2020-08-25target/riscv: Allow generating hlv/hlvx/hsv instructionsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com Message-Id: <477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com>
2020-06-19target/riscv: Implement checks for hfenceAlistair Francis
Call the helper_hyp_tlb_flush() function on hfence instructions which will generate an illegal insruction execption if we don't have permission to flush the Hypervisor level TLBs. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-03target/riscv: Drop support for ISA spec version 1.09.1Alistair Francis
The RISC-V ISA spec version 1.09.1 has been deprecated in QEMU since 4.1. It's not commonly used so let's remove support for it. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-03-16target/riscv: Correctly implement TSR trapAlistair Francis
As reported in: https://bugs.launchpad.net/qemu/+bug/1851939 we weren't correctly handling illegal instructions based on the value of MSTATUS_TSR and the current privledge level. This patch fixes the issue raised in the bug by raising an illegal instruction if TSR is set and we are in S-Mode. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Jonathan Behrens <jonathan@fintelia.io Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-27target/riscv: Add the MSTATUS_MPV_ISSET helper macroAlistair Francis
Add a helper macro MSTATUS_MPV_ISSET() which will determine if the MSTATUS_MPV bit is set for both 32-bit and 64-bit RISC-V. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-27target/riscv: Add support for the 32-bit MSTATUSH CSRAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-27target/riscv: Add Hypervisor trap return supportAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-27target/riscv: Generate illegal instruction on WFI when V=1Alistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-16riscv: Set xPIE to 1 after xRETYiting Wang
When executing an xRET instruction, supposing xPP holds the value y, xIE is set to xPIE; the privilege mode is changed to y; xPIE is set to 1. But QEMU sets xPIE to 0 incorrectly. Signed-off-by: Yiting Wang <yiting.wang@windriver.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 02:00:44 +0000