aboutsummaryrefslogtreecommitdiff
path: root/target/riscv/machine.c
AgeCommit message (Collapse)Author
2024-10-30target/riscv: introduce ssp and enabling controls for zicfissDeepak Gupta
zicfiss introduces a new state ssp ("shadow stack register") in cpu. ssp is expressed as a new unprivileged csr (CSR_SSP=0x11) and holds virtual address for shadow stack as programmed by software. Shadow stack (for each mode) is enabled via bit3 in *envcfg CSRs. Shadow stack can be enabled for a mode only if it's higher privileged mode had it enabled for itself. M mode doesn't need enabling control, it's always available if extension is available on cpu. This patch also implements helper bcfi function which determines if bcfi is enabled at current privilege or not. Adds ssp to migration state as well. Signed-off-by: Deepak Gupta <debug@rivosinc.com> Co-developed-by: Jim Shu <jim.shu@sifive.com> Co-developed-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241008225010.1861630-12-debug@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-10-30target/riscv: Introduce elp state and enabling controls for zicfilpDeepak Gupta
zicfilp introduces a new state elp ("expected landing pad") in cpu. During normal execution, elp is idle (NO_LP_EXPECTED) i.e not expecting landing pad. On an indirect call, elp moves LP_EXPECTED. When elp is LP_EXPECTED, only a subsquent landing pad instruction can set state back to NO_LP_EXPECTED. On reset, elp is set to NO_LP_EXPECTED. zicfilp is enabled via bit2 in *envcfg CSRs. Enabling control for M-mode is in mseccfg CSR at bit position 10. On trap, elp state is saved away in *status. Adds elp to the migration state as well. Signed-off-by: Deepak Gupta <debug@rivosinc.com> Co-developed-by: Jim Shu <jim.shu@sifive.com> Co-developed-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20241008225010.1861630-4-debug@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Save counter values during countinhibit updateAtish Patra
Currently, if a counter monitoring cycle/instret is stopped via mcountinhibit we just update the state while the value is saved during the next read. This is not accurate as the read may happen many cycles after the counter is stopped. Ideally, the read should return the value saved when the counter is stopped. Thus, save the value of the counter during the inhibit update operation and return that value during the read if corresponding bit in mcountihibit is set. Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20240711-smcntrpmf_v7-v8-8-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-03-08target/riscv: mcountinhibit, mcounteren, scounteren, hcounteren is 32-bitVadim Shakirov
mcountinhibit, mcounteren, scounteren and hcounteren must always be 32-bit by privileged spec Signed-off-by: Vadim Shakirov <vadim.shakirov@syntacore.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20240202113919.18236-1-vadim.shakirov@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-02-09target/riscv: Move misa_mxl_max to classAkihiko Odaki
misa_mxl_max is common for all instances of a RISC-V CPU class so they are better put into class. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240203-riscv-v11-2-a23f4848a628@daynix.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-12-29target/riscv: Constify VMState in machine.cRichard Henderson
Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-16-richard.henderson@linaro.org>
2023-11-07target/riscv: Add "pmu-mask" property to replace "pmu-num"Rob Bradford
Using a mask instead of the number of PMU devices supports the accurate emulation of platforms that have a discontinuous set of PMU counters. The "pmu-num" property now generates a warning when used by the user on the command line. Rather than storing the value for "pmu-num" convert it directly to the mask if it is specified (overwriting the default "pmu-mask" value) likewise the value is calculated from the mask if the property value is obtained. In the unusual situation that both "pmu-mask" and "pmu-num" are provided then then the order on the command line determines which takes precedence (later overwriting earlier.) Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231031154000.18134-5-rbradford@rivosinc.com> [Changes by AF - Fixup ext_zihpm logic after rebase ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.Rajnesh Kanwal
This change adds support for inserting virtual interrupts from HS-mode into VS-mode using hvien and hvip csrs. This also allows for IRQ filtering from HS-mode. Also, the spec doesn't mandate the interrupt to be actually supported in hardware. Which allows HS-mode to assert virtual interrupts to VS-mode that have no connection to any real interrupt events. This is defined as part of the AIA specification [0], "6.3.2 Virtual interrupts for VS level". [0]: https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231016111736.28721-7-rkanwal@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Add M-mode virtual interrupt and IRQ filtering support.Rajnesh Kanwal
This change adds support for inserting virtual interrupts from M-mode into S-mode using mvien and mvip csrs. IRQ filtering is a use case of this change, i-e M-mode can stop delegating an interrupt to S-mode and instead enable it in MIE and receive those interrupts in M-mode and then selectively inject the interrupt using mvien and mvip. Also, the spec doesn't mandate the interrupt to be actually supported in hardware. Which allows M-mode to assert virtual interrupts to S-mode that have no connection to any real interrupt events. This is defined as part of the AIA specification [0], "5.3 Interrupt filtering and virtual interrupts for supervisor level". [0]: https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231016111736.28721-6-rkanwal@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-28target/riscv: Restrict KVM-specific fields from ArchCPUPhilippe Mathieu-Daudé
These fields shouldn't be accessed when KVM is not available. Restrict the KVM timer migration state. Rename the KVM timer post_load() handler accordingly, because cpu_post_load() is too generic. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230626232007.8933-3-philmd@linaro.org>
2023-05-05target/riscv: Fix format for indentationWeiwei Li
Fix identation problems, and try to use the same indentation strategy in the same file. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Convert env->virt to a bool env->virt_enabledLIU Zhiwei
Currently we only use the env->virt to encode the virtual mode enabled status. Let's make it a bool type. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Message-ID: <20230325145348.1208-1-zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230327080858.39703-6-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: add support for Zcmt extensionWeiwei Li
Add encode, trans* functions and helper functions support for Zcmt instrutions. Add support for jvt csr. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230307081403.61950-8-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-03-01target/riscv/cpu: remove CPUArchState::features and friendsDaniel Henrique Barboza
The attribute is no longer used since we can retrieve all the enabled features in the hart by using cpu->cfg instead. Remove env->feature, riscv_feature() and riscv_set_feature(). We also need to bump vmstate_riscv_cpu version_id and minimal_version_id since 'features' is no longer being migrated. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20230222185205.355361-11-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv: remove RISCV_FEATURE_PMPDaniel Henrique Barboza
RISCV_FEATURE_PMP is being set via riscv_set_feature() by mirroring the cpu->cfg.pmp flag. Use the flag instead. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20230222185205.355361-8-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv: remove RISCV_FEATURE_DEBUGDaniel Henrique Barboza
RISCV_FEATURE_DEBUG will always follow the value defined by cpu->cfg.debug flag. Read the flag instead. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20230222185205.355361-5-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-01-20hw/char: riscv_htif: Move registers from CPUArchState to HTIFStateBin Meng
At present for some unknown reason the HTIF registers (fromhost & tohost) are defined in the RISC-V CPUArchState. It should really be put in the HTIFState struct as it is only meaningful to HTIF. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221229091828.1945072-6-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06target/riscv: Add itrigger_enabled field to CPURISCVStateLIU Zhiwei
Avoid calling riscv_itrigger_enabled() when calculate the tbflags. As the itrigger enable status can only be changed when write tdata1, migration load or itrigger fire, update env->itrigger_enabled at these places. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221013062946.7530-5-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06target/riscv: Add smstateen supportMayuresh Chitale
Smstateen extension specifies a mechanism to close the potential covert channels that could cause security issues. This patch adds the CSRs defined in the specification and the corresponding predicates and read/write functions. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221016124726.102129-2-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-27target/riscv: debug: Introduce tdata1, tdata2, and tdata3 CSRsFrank Chang
Replace type2_trigger_t with the real tdata1, tdata2, and tdata3 CSRs, which allows us to support more types of triggers in the future. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20220909134215.1843865-4-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-27target/riscv: debug: Determine the trigger type from tdata1.typeFrank Chang
Current RISC-V debug assumes that only type 2 trigger is supported. To allow more types of triggers to be supported in the future (e.g. type 6 trigger, which is similar to type 2 trigger with additional functionality), we should determine the trigger type from tdata1.type. RV_MAX_TRIGGERS is also introduced in replacement of TRIGGER_TYPE2_NUM. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> [bmeng: fixed MXL_RV128 case, and moved macros to the following patch] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220909134215.1843865-2-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-27target/riscv: Set the CPU resetvec directlyAlistair Francis
Instead of using our properties to set a config value which then might be used to set the resetvec (depending on your timing), let's instead just set the resetvec directly in the env struct. This allows us to set the reset vec from the command line with: -global driver=riscv.hart_array,property=resetvec,value=0x20000400 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220914101108.82571-2-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-07target/riscv: Add sscofpmf extension supportAtish Patra
The Sscofpmf ('Ss' for Privileged arch and Supervisor-level extensions, and 'cofpmf' for Count OverFlow and Privilege Mode Filtering) extension allows the perf to handle overflow interrupts and filtering support. This patch provides a framework for programmable counters to leverage the extension. As the extension doesn't have any provision for the overflow bit for fixed counters, the fixed events can also be monitoring using programmable counters. The underlying counters for cycle and instruction counters are always running. Thus, a separate timer device is programmed to handle the overflow. Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220824221701.41932-2-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-07target/riscv: Add vstimecmp supportAtish Patra
vstimecmp CSR allows the guest OS or to program the next guest timer interrupt directly. Thus, hypervisor no longer need to inject the timer interrupt to the guest if vstimecmp is used. This was ratified as a part of the Sstc extension. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220824221357.41070-4-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-07target/riscv: Add stimecmp supportAtish Patra
stimecmp allows the supervisor mode to update stimecmp CSR directly to program the next timer interrupt. This CSR is part of the Sstc extension which was ratified recently. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220824221357.41070-3-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-07hw/intc: Move mtimer/mtimecmp to aclintAtish Patra
Historically, The mtime/mtimecmp has been part of the CPU because they are per hart entities. However, they actually belong to aclint which is a MMIO device. Move them to the ACLINT device. This also emulates the real hardware more closely. Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220824221357.41070-2-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-07-03target/riscv: Support mcycle/minstret write operationAtish Patra
mcycle/minstret are actually WARL registers and can be written with any given value. With SBI PMU extension, it will be used to store a initial value provided from supervisor OS. The Qemu also need prohibit the counter increment if mcountinhibit is set. Support mcycle/minstret through generic counter infrastructure. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220620231603.2547260-8-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-07-03target/riscv: Add support for hpmcounters/hpmeventsAtish Patra
With SBI PMU extension, user can use any of the available hpmcounters to track any perf events based on the value written to mhpmevent csr. Add read/write functionality for these csrs. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220620231603.2547260-7-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-07-03target/riscv: Implement mcountinhibit CSRAtish Patra
As per the privilege specification v1.11, mcountinhibit allows to start/stop a pmu counter selectively. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220620231603.2547260-6-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-22target/riscv: machine: Add debug state descriptionBin Meng
Add a subsection to machine.c to migrate debug CSR state. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421003324.1134983-5-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-22target/riscv: Add *envcfg* CSRs supportAtish Patra
The RISC-V privileged specification v1.12 defines few execution environment configuration CSRs that can be used enable/disable extensions per privilege levels. Add the basic support for these CSRs. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-Id: <20220303185440.512391-6-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-02-16target/riscv: Implement AIA xiselect and xireg CSRsAnup Patel
The AIA specification defines [m|s|vs]iselect and [m|s|vs]ireg CSRs which allow indirect access to interrupt priority arrays and per-HART IMSIC registers. This patch implements AIA xiselect and xireg CSRs. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-id: 20220204174700.534953-15-anup@brainfault.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-02-16target/riscv: Implement AIA hvictl and hviprioX CSRsAnup Patel
The AIA hvictl and hviprioX CSRs allow hypervisor to control interrupts visible at VS-level. This patch implements AIA hvictl and hviprioX CSRs. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-id: 20220204174700.534953-12-anup@brainfault.org [ Changes by AF: - Fix possible unintilised variable error in rmw_sie() ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-02-16target/riscv: Implement AIA CSRs for 64 local interrupts on RV32Anup Patel
The AIA specification adds new CSRs for RV32 so that RISC-V hart can support 64 local interrupts on both RV32 and RV64. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-id: 20220204174700.534953-11-anup@brainfault.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-02-16target/riscv: Implement AIA local interrupt prioritiesAnup Patel
The AIA spec defines programmable 8-bit priority for each local interrupt at M-level, S-level and VS-level so we extend local interrupt processing to consider AIA interrupt priorities. The AIA CSRs which help software configure local interrupt priorities will be added by subsequent patches. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220204174700.534953-10-anup@brainfault.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-02-16target/riscv: Implement hgeie and hgeip CSRsAnup Patel
The hgeie and hgeip CSRs are required for emulating an external interrupt controller capable of injecting virtual external interrupt to Guest/VM running at VS-level. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-id: 20220204174700.534953-4-anup@brainfault.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21target/riscv: Split out the vill from vtypeLIU Zhiwei
We need not specially process vtype when XLEN changes. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220120122050.41546-16-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21target/riscv: Create current pm fields in envLIU Zhiwei
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220120122050.41546-12-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21target/riscv: Create xl field in envLIU Zhiwei
Current xlen has been used in helper functions and many other places. The computation of current xlen is not so trivial, so that we should recompute it as little as possible. Fortunately, xlen only changes in very seldom cases, such as exception, misa write, mstatus write, cpu reset, migration load. So that we can only recompute xlen in this places and cache it into CPURISCVState. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220120122050.41546-6-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21target/riscv: Support virtual time context synchronizationYifei Jiang
Add virtual time context description to vmstate_kvmtimer. After cpu being loaded, virtual time context is updated to KVM. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Mingwang Li <limingwang@huawei.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220112081329.1835-13-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: adding high part of some csrsFrédéric Pétrot
Adding the high part of a very minimal set of csr. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-16-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08target/riscv: array for the 64 upper bits of 128-bit registersFrédéric Pétrot
The upper 64-bit of the 128-bit registers have now a place inside the cpu state structure, and are created as globals for future use. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-7-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-11-17target/riscv: machine: Sort the .subsectionsBin Meng
Move the codes around so that the order of .subsections matches the one they are referenced in vmstate_riscv_cpu. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211030030606.32297-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28target/riscv: Add J extension state descriptionAlexey Baturo
Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211025173609.2724490-5-space.monkey.delivers@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22target/riscv: Split misa.mxl and misa.extRichard Henderson
The hw representation of misa.mxl is at the high bits of the misa csr. Representing this in the same way inside QEMU results in overly complex code trying to check that field. Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20211020031709.359469-4-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11target/riscv: Remove privilege v1.9 specific CSR related codeAtish Patra
Qemu doesn't support RISC-V privilege specification v1.9. Remove the remaining v1.9 specific references from the implementation. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210319194534.2082397-2-atish.patra@wdc.com> [Changes by AF: - Rebase on latest patches - Bump the vmstate_riscv_cpu version_id and minimum_version_id ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03target/riscv: Add V extension state descriptionYifei Jiang
In the case of supporting V extension, add V extension description to vmstate_riscv_cpu. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-6-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03target/riscv: Add H extension state descriptionYifei Jiang
In the case of supporting H extension, add H extension description to vmstate_riscv_cpu. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-5-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03target/riscv: Add PMP state descriptionYifei Jiang
In the case of supporting PMP feature, add PMP state description to vmstate_riscv_cpu. 'vmstate_pmp_addr' and 'num_rules' could be regenerated by pmp_update_rule(). But there exists the problem of updating num_rules repeatedly in pmp_update_rule(). So here extracts pmp_update_rule_addr() and pmp_update_rule_nums() to update 'vmstate_pmp_addr' and 'num_rules' respectively. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-4-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03target/riscv: Add basic vmstate description of CPUYifei Jiang
Add basic CPU state description to the newly created machine.c Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-3-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-09 00:47:06 +0000