aboutsummaryrefslogtreecommitdiff
path: root/target/riscv/csr.c
AgeCommit message (Collapse)Author
2024-01-05target/riscv: Fix mcycle/minstret increment behaviorXu Lu
The mcycle/minstret counter's stop flag is mistakenly updated on a copy on stack. Thus the counter increments even when the CY/IR bit in the mcountinhibit register is set. This commit corrects its behavior. Fixes: 3780e33732f88 (target/riscv: Support mcycle/minstret write operation) Signed-off-by: Xu Lu <luxu.kernel@bytedance.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-11-07target/riscv: Don't assume PMU counters are continuousRob Bradford
Check the PMU available bitmask when checking if a counter is valid rather than comparing the index against the number of PMUs. Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20231031154000.18134-3-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: correct csr_ops[CSR_MSECCFG]Heinrich Schuchardt
The CSR register mseccfg is used by multiple extensions: Smepm and Zkr. Consider this when checking the existence of the register. Fixes: 77442380ecbe ("target/riscv: rvk: add CSR support for Zkr") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231030102105.19501-1-heinrich.schuchardt@canonical.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: add zicntr extension flag for TCGDaniel Henrique Barboza
zicntr is the Base Counters and Timers extension described in chapter 12 of the unprivileged spec. It describes support for RDCYCLE, RDTIME and RDINSTRET. QEMU already implements it in TCG way before it was a discrete extension. zicntr is part of the RVA22 profile, so let's add it to QEMU to make the future profile implementation flag complete. Given than it represents an already existing feature, default it to 'true' for all CPUs. For TCG, we need a way to disable zicntr if the user wants to. This is done by restricting access to the CYCLE, TIME, and INSTRET counters via the 'ctr()' predicate when we're about to access them. Disabling zicntr happens via the command line or if its dependency, zicsr, happens to be disabled. We'll check for zicsr during realize() and, in case it's absent, disable zicntr. However, if the user was explicit about having zicntr support, error out instead of disabling it. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231023153927.435083-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07Add epmp to extensions list and rename it to smepmpHimanshu Chauhan
Smepmp is a ratified extension which qemu refers to as epmp. Rename epmp to smepmp and add it to extension list so that it is added to the isa string. Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com> Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231019065546.1431579-1-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.Rajnesh Kanwal
This change adds support for inserting virtual interrupts from HS-mode into VS-mode using hvien and hvip csrs. This also allows for IRQ filtering from HS-mode. Also, the spec doesn't mandate the interrupt to be actually supported in hardware. Which allows HS-mode to assert virtual interrupts to VS-mode that have no connection to any real interrupt events. This is defined as part of the AIA specification [0], "6.3.2 Virtual interrupts for VS level". [0]: https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231016111736.28721-7-rkanwal@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Add M-mode virtual interrupt and IRQ filtering support.Rajnesh Kanwal
This change adds support for inserting virtual interrupts from M-mode into S-mode using mvien and mvip csrs. IRQ filtering is a use case of this change, i-e M-mode can stop delegating an interrupt to S-mode and instead enable it in MIE and receive those interrupts in M-mode and then selectively inject the interrupt using mvien and mvip. Also, the spec doesn't mandate the interrupt to be actually supported in hardware. Which allows M-mode to assert virtual interrupts to S-mode that have no connection to any real interrupt events. This is defined as part of the AIA specification [0], "5.3 Interrupt filtering and virtual interrupts for supervisor level". [0]: https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20231016111736.28721-6-rkanwal@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: Without H-mode mask all HS mode inturrupts in mie.Rajnesh Kanwal
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20231016111736.28721-2-rkanwal@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-11-07target/riscv: rename ext_icsr to ext_zicsrDaniel Henrique Barboza
Add a leading 'z' to improve grepping. When one wants to search for uses of zicsr they're more likely to do 'grep -i zicsr' than 'grep -i icsr'. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20231012164604.398496-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-10-12target/riscv: move riscv_cpu_validate_set_extensions() to tcg-cpu.cDaniel Henrique Barboza
This function is the core of the RISC-V validations for TCG CPUs, and it has a lot going on. Functions in cpu.c were made public to allow them to be used by the KVM accelerator class later on. 'cpu_cfg_ext_get_min_version()' is notably hard to move it to another file due to its dependency with isa_edata_arr[] array, thus make it public and use it as is for now. riscv_cpu_validate_set_extensions() is kept public because it's used by csr.c in write_misa(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20230925175709.35696-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-11target/riscv: don't read CSR in riscv_csrrw_do64Nikita Shubin
As per ISA: "For CSRRWI, if rd=x0, then the instruction shall not read the CSR and shall not cause any of the side effects that might occur on a CSR read." trans_csrrwi() and trans_csrrw() call do_csrw() if rd=x0, do_csrw() calls riscv_csrrw_do64(), via helper_csrw() passing NULL as *ret_value. Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20230808090914.17634-1-nikita.shubin@maquefel.me> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-11target/riscv: Align the AIA model to v1.0 ratified specTommy Wu
According to the new spec, when vsiselect has a reserved value, attempts from M-mode or HS-mode to access vsireg, or from VS-mode to access sireg, should preferably raise an illegal instruction exception. Signed-off-by: Tommy Wu <tommy.wu@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230816061647.600672-1-tommy.wu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-11target/riscv: Update CSR bits name for svadu extensionWeiwei Li
The Svadu specification updated the name of the *envcfg bit from HADE to ADUE. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230816141916.66898-1-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-11target/riscv: Implement WARL behaviour for mcountinhibit/mcounterenRob Bradford
These are WARL fields - zero out the bits for unavailable counters and special case the TM bit in mcountinhibit which is hardwired to zero. This patch achieves this by modifying the value written so that any use of the field will see the correctly masked bits. Tested by modifying OpenSBI to write max value to these CSRs and upon subsequent read the appropriate number of bits for number of PMUs is enabled and the TM bit is zero in mcountinhibit. Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20230802124906.24197-1-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-08riscv: spelling fixesMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Acked-by: Alistair Francis <alistair.francis@wdc.com>
2023-08-31target/helpers: Remove unnecessary 'qemu/main-loop.h' headerPhilippe Mathieu-Daudé
"qemu/main-loop.h" declares functions related to QEMU's main loop mutex, which these files don't access. Remove the unused "qemu/main-loop.h" header. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230828221314.18435-8-philmd@linaro.org>
2023-07-10target/riscv: update cur_pmbase/pmmask based on mode affected by MPRVWeiwei Li
Pointer mask is also affected by MPRV which means cur_pmbase/pmmask should also take MPRV into consideration. As pointer mask for instruction is not supported currently, so we can directly update cur_pmbase/pmmask based on address related mode and xlen affected by MPRV now. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230614032547.35895-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10target/riscv: Remove redundant assignment to SXLWeiwei Li
SXL is initialized as env->misa_mxl which is also the mxl value. So we can just remain it unchanged to keep it read-only. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230603134236.15719-4-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10target/riscv: Support MSTATUS.MPV/GVA only when RVH is enabledWeiwei Li
MPV and GVA bits are added by hypervisor extension to mstatus and mstatush (if MXLEN=32). Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230603134236.15719-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: smstateen check for fcsrMayuresh Chitale
Implement the s/h/mstateen.fcsr bit as defined in the smstateen spec and check for it when accessing the fcsr register and its fields. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230518175058.2772506-2-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Update cur_pmmask/base when xl changesWeiwei Li
write_mstatus() can only change current xl when in debug mode. And we need update cur_pmmask/base in this case. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230524015933.17349-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: rework write_misa()Daniel Henrique Barboza
write_misa() must use as much common logic as possible. We want to open code just the bits that are exclusive to the CSR write operation and TCG internals. Our validation is done with riscv_cpu_validate_set_extensions(), but we need a small tweak first. When enabling RVG we're doing: env->misa_ext |= RVI | RVM | RVA | RVF | RVD; env->misa_ext_mask = env->misa_ext; This works fine for realize() time but this can potentially overwrite env->misa_ext_mask if we reutilize the function for write_misa(). Instead of doing misa_ext_mask = misa_ext, sum up the RVG extensions in misa_ext_mask as well. This won't change realize() time behavior (misa_ext_mask will be == misa_ext) and will ensure that write_misa() won't change misa_ext_mask by accident. After that, rewrite write_misa() to work as follows: - mask the write using misa_ext_mask to avoid enabling unsupported extensions; - suppress RVC if the next insn isn't aligned; - disable RVG if any of RVG dependencies are being disabled by the user; - assign env->misa_ext and run riscv_cpu_validate_set_extensions(). On error, rollback env->misa_ext to its original value, logging a GUEST_ERROR to inform the user about the failed write; - handle RVF and MSTATUS_FS and continue as usual. Let's keep write_misa() as experimental for now until this logic gains enough mileage. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230517135714.211809-12-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Restore the predicate() NULL check behaviorBin Meng
When reading a non-existent CSR QEMU should raise illegal instruction exception, but currently it just exits due to the g_assert() check. This actually reverts commit 0ee342256af9205e7388efdf193a6d8f1ba1a617. Some comments are also added to indicate that predicate() must be provided for an implemented CSR. Reported-by: Fei Wu <fei2.wu@intel.com> Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230417043054.3125614-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Set MMU_2STAGE_BIT in riscv_cpu_mmu_indexRichard Henderson
Incorporate the virt_enabled and MPV checks into the cpu_mmu_index function, so we don't have to keep doing it within tlb_fill and subroutines. This also elides a flush on changes to MPV. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-17-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-17-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Reduce overhead of MSTATUS_SUM changeFei Wu
Kernel needs to access user mode memory e.g. during syscalls, the window is usually opened up for a very limited time through MSTATUS.SUM, the overhead is too much if tlb_flush() gets called for every SUM change. This patch creates a separate MMU index for S+SUM, so that it's not necessary to flush tlb anymore when SUM changes. This is similar to how ARM handles Privileged Access Never (PAN). Result of 'pipe 10' from unixbench boosts from 223656 to 1705006. Many other syscalls benefit a lot from this too. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fei Wu <fei2.wu@intel.com> Message-Id: <20230324054154.414846-3-fei2.wu@intel.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-8-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-8-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Add a general status enum for extensionsLIU Zhiwei
The pointer masking is the only extension that directly use status. The vector or float extension uses the status in an indirect way. Replace the pointer masking extension special status fields with the general status. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230324143031.1093-3-zhiwei_liu@linux.alibaba.com> [rth: Add a typedef for the enum] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-3-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-3-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: fix H extension TVM trapYi Chen
- Trap satp/hgatp accesses from HS-mode when MSTATUS.TVM is enabled. - Trap satp accesses from VS-mode when HSTATUS.VTVM is enabled. - Raise RISCV_EXCP_ILLEGAL_INST when U-mode executes SFENCE.VMA/SINVAL.VMA. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes SFENCE.VMA/SINVAL.VMA or VS-mode executes SFENCE.VMA/SINVAL.VMA with HSTATUS.VTVM enabled. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes HFENCE.GVMA/HFENCE.VVMA/HINVAL.GVMA/HINVAL.VVMA. Signed-off-by: Yi Chen <chenyi2000@zju.edu.cn> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406101559.39632-1-chenyi2000@zju.edu.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Legalize MPP value in write_mstatusWeiwei Li
mstatus.MPP field is a WARL field since priv version 1.11, so we remain it unchanged if an invalid value is written into it. And after this, RVH shouldn't be passed to riscv_cpu_set_mode(). Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230407014743.18779-4-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Fix lines with over 80 charactersWeiwei Li
Fix lines with over 80 characters for both code and comments. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-5-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Fix format for commentsWeiwei Li
Fix formats for multi-lines comments. Add spaces around single line comments(after "/*" and before "*/"). Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-4-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Remove riscv_cpu_virt_enabled()Weiwei Li
Directly use env->virt_enabled instead. Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: add support for Zcmt extensionWeiwei Li
Add encode, trans* functions and helper functions support for Zcmt instrutions. Add support for jvt csr. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230307081403.61950-8-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Simplify arguments for riscv_csrrw_checkWeiwei Li
Remove RISCVCPU argument, and get cfg infomation from CPURISCVState directly. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230309071329.45932-5-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Simplify type conversion for CPURISCVStateWeiwei Li
Use CPURISCVState as argument directly in riscv_cpu_update_mip and riscv_timer_write_timecmp, since type converts from CPURISCVState to RISCVCPU in many caller of them and then back to CPURISCVState in them. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230309071329.45932-4-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-05-05target/riscv: Avoid env_archcpu() when reading RISCVCPUConfigWeiwei Li
Use riscv_cpu_cfg(env) instead of env_archcpu().cfg. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230309071329.45932-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-03-07includes: move tb_flush into its own headerAlex Bennée
This aids subsystems (like gdbstub) that want to trigger a flush without pulling target specific headers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org> Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
2023-03-06riscv: Allow user to set the satp modeAlexandre Ghiti
RISC-V specifies multiple sizes for addressable memory and Linux probes for the machine's support at startup via the satp CSR register (done in csr.c:validate_vm). As per the specification, sv64 must support sv57, which in turn must support sv48...etc. So we can restrict machine support by simply setting the "highest" supported mode and the bare mode is always supported. You can set the satp mode using the new properties "sv32", "sv39", "sv48", "sv57" and "sv64" as follows: -cpu rv64,sv57=on # Linux will boot using sv57 scheme -cpu rv64,sv39=on # Linux will boot using sv39 scheme -cpu rv64,sv57=off # Linux will boot using sv48 scheme -cpu rv64 # Linux will boot using sv57 scheme by default We take the highest level set by the user: -cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme We make sure that invalid configurations are rejected: -cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are # enabled We accept "redundant" configurations: -cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme And contradictory configurations: -cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Ludovic Henry <ludovic@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06riscv: Change type of valid_vm_1_10_[32|64] to boolAlexandre Ghiti
This array is actually used as a boolean so swap its current char type to a boolean and at the same time, change the type of validate_vm to bool since it returns valid_vm_1_10_[32|64]. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-3-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01Merge patch series "RISCVCPUConfig related cleanups"Palmer Dabbelt
Daniel Henrique Barboza <dbarboza@ventanamicro.com> says: These cleanups were suggested by LIU Zhiwei during the review of d3e6d5762b ("Merge patch series "make write_misa a no-op and FEATURE_* cleanups""). * b4-shazam-merge: target/riscv/csr.c: avoid env_archcpu() usages when reading RISCVCPUConfig target/riscv/csr.c: use riscv_cpu_cfg() to avoid env_cpu() pointers target/riscv/csr.c: simplify mctr() target/riscv/csr.c: use env_archcpu() in ctr() Message-ID: <20230224174520.92490-1-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv/csr.c: avoid env_archcpu() usages when reading RISCVCPUConfigDaniel Henrique Barboza
Retrieving the CPU pointer using env_archcpu() just to access cpu->cfg can be avoided by using riscv_cpu_cfg(). Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20230224174520.92490-5-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv/csr.c: use riscv_cpu_cfg() to avoid env_cpu() pointersDaniel Henrique Barboza
A common trend in this file is to retrieve a RISCVCPU pointer by first retrieving a CPUState pointer via env_cpu(). The CPU pointer is used only to access the RISCVCPUConfig object and nothing else. Let's use riscv_cpu_cfg() to access what we need directly without these 2 pointers. Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20230224174520.92490-4-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv/csr.c: simplify mctr()Daniel Henrique Barboza
Use riscv_cpu_cfg() to retrieve pmu_num. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20230224174520.92490-3-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv/csr.c: use env_archcpu() in ctr()Daniel Henrique Barboza
We don't need to use env_cpu() and CPUState(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20230224174520.92490-2-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01Merge patch series "target/riscv: Add support for Svadu extension"Palmer Dabbelt
Weiwei Li <liweiwei@iscas.ac.cn> says: This patchset adds support svadu extension. It also fixes some relationship between *envcfg fields and Svpbmt/Sstc extensions. Specification for Svadu extension can be found in: https://github.com/riscv/riscv-svadu * b4-shazam-merge: target/riscv: Export Svadu property target/riscv: Add *envcfg.HADE related check in address translation target/riscv: Add *envcfg.PBMTE related check in address translation target/riscv: Add csr support for svadu target/riscv: Fix the relationship of PBMTE/STCE fields between menvcfg and henvcfg target/riscv: Fix the relationship between menvcfg.PBMTE/STCE and Svpbmt/Sstc extensions Message-ID: <20230224040852.37109-1-liweiwei@iscas.ac.cn> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv: Add csr support for svaduWeiwei Li
Add ext_svadu property Add HADE field in *envcfg: * menvcfg.HADE is read-only zero if Svadu is not implemented. * henvcfg.HADE is read-only zero if menvcfg.HADE is zero. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230224040852.37109-4-liweiwei@iscas.ac.cn> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv: Fix the relationship of PBMTE/STCE fields between menvcfg and ↵Weiwei Li
henvcfg henvcfg.PBMTE/STCE are read-only zero if menvcfg.PBMTE/STCE are zero. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230224040852.37109-3-liweiwei@iscas.ac.cn> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv: Fix the relationship between menvcfg.PBMTE/STCE and ↵Weiwei Li
Svpbmt/Sstc extensions menvcfg.PBMTE/STCE are read-only zero if Svpbmt/Sstc are not implemented. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230224040852.37109-2-liweiwei@iscas.ac.cn> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01Merge patch series "target/riscv: Various fixes to gdbstub and CSR access"Palmer Dabbelt
Bin Meng <bmeng@tinylab.org> says: At present gdbstub reports an incorrect / incomplete CSR list in the target description XML, for example: - menvcfg is reported in 'sifive_u' machine - fcsr is missing in a F/D enabled processor The issue is caused by: - priv spec version check is missing when reporting CSRs - CSR predicate() routine is called without turning on the debugger flag * b4-shazam-merge: target/riscv: Group all predicate() routines together target/riscv: Drop priv level check in mseccfg predicate() target/riscv: Allow debugger to access sstc CSRs target/riscv: Allow debugger to access {h, s}stateen CSRs target/riscv: Allow debugger to access seed CSR target/riscv: Allow debugger to access user timer and counter CSRs target/riscv: gdbstub: Drop the vector CSRs in riscv-vector.xml target/riscv: gdbstub: Turn on debugger mode before calling CSR predicate() target/riscv: Avoid reporting odd-numbered pmpcfgX in the CSR XML for RV64 target/riscv: Simplify getting RISCVCPU pointer from env target/riscv: Simplify {read, write}_pmpcfg() a little bit target/riscv: Use 'bool' type for read_only target/riscv: Coding style fixes in csr.c target/riscv: gdbstub: Do not generate CSR XML if Zicsr is disabled target/riscv: gdbstub: Minor change for better readability target/riscv: Use g_assert() for the predicate() NULL check target/riscv: Add some comments to clarify the priority policy of riscv_csrrw_check() target/riscv: gdbstub: Check priv spec version before reporting CSR Message-ID: <20230228104035.1879882-1-bmeng@tinylab.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv: Group all predicate() routines togetherBin Meng
Move sstc()/sstc32() to where all predicate() routines live, and smstateen_acc_ok() to near {read,write}_xenvcfg(). Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Message-ID: <20230228104035.1879882-19-bmeng@tinylab.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01target/riscv: Drop priv level check in mseccfg predicate()Bin Meng
riscv_csrrw_check() already does the generic privilege level check hence there is no need to do the specific M-mode access check in the mseccfg predicate(). With this change debugger can access the mseccfg CSR anytime. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Message-ID: <20230228104035.1879882-18-bmeng@tinylab.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-27 08:02:38 +0000