aboutsummaryrefslogtreecommitdiff
path: root/target/riscv/cpu_helper.c
AgeCommit message (Collapse)Author
2019-06-10target/riscv: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace riscv_env_get_cpu with env_archcpu. The combination CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-24target/riscv: Improve the scause logicAlistair Francis
No functional change, just making the code easier to read. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Trigger interrupt on MIP update asynchronouslyAlistair Francis
The requirement of holding the iothread_mutex is burdersome when swapping the background and foreground registers in the Hypervisor extension. To avoid the requrirement let's set the interrupt asynchronously. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-10tcg: Use CPUClass::tlb_fill in cputlb.cRichard Henderson
We can now use the CPUClass hook instead of a named function. Create a static tlb_fill function to avoid other changes within cputlb.c. This also isolates the asserts within. Remove the named tlb_fill function from all of the targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10target/riscv: Convert to CPUClass::tlb_fillRichard Henderson
Note that env->pc is removed from the qemu_log as that value is garbage. The PC isn't recovered until cpu_restore_state, called from cpu_loop_exit_restore, called from riscv_raise_exception. Cc: qemu-riscv@nongnu.org Cc: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-19RISC-V: Update load reservation comment in do_interruptMichael Clark
Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Convert trap debugging to trace eventsMichael Clark
Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Add support for vectored interruptsMichael Clark
If vectored interrupts are enabled (bits[1:0] of mtvec/stvec == 1) then use the following logic for trap entry address calculation: pc = mtvec + cause * 4 In addition to adding support for vectored interrupts this patch simplifies the interrupt delivery logic by making sync/async cause decoding and encoding steps distinct. The cause code and the sign bit indicating sync/async is split at the beginning of the function and fixed cause is renamed to cause. The MSB setting for async traps is delayed until setting mcause/scause to allow redundant variables to be eliminated. Some variables are renamed for conciseness and moved so that decls are at the start of the block. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Change local interrupts from edge to levelMichael Clark
This effectively changes riscv_cpu_update_mip from edge to level. i.e. cpu_interrupt or cpu_reset_interrupt are called regardless of the current interrupt level. Fixes WFI doesn't return when a IPI is issued: - https://github.com/riscv/riscv-qemu/issues/132 To test: 1) Apply RISC-V Linux CPU hotplug patch: - http://lists.infradead.org/pipermail/linux-riscv/2018-May/000603.html 2) Enable CONFIG_CPU_HOTPLUG in linux .config 3) Try to offline and online cpus: echo 1 > /sys/devices/system/cpu/cpu2/online echo 0 > /sys/devices/system/cpu/cpu2/online echo 1 > /sys/devices/system/cpu/cpu2/online Reported-by: Atish Patra <atishp04@gmail.com> Cc: Atish Patra <atishp04@gmail.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Allow interrupt controllers to claim interruptsMichael Clark
We can't allow the supervisor to control SEIP as this would allow the supervisor to clear a pending external interrupt which will result in lost a interrupt in the case a PLIC is attached. The SEIP bit must be hardware controlled when a PLIC is attached. This logic was previously hard-coded so SEIP was always masked even if no PLIC was attached. This patch adds riscv_cpu_claim_interrupts so that the PLIC can register control of SEIP. In the case of models without a PLIC (spike), the SEIP bit remains software controlled. This interface allows for hardware control of supervisor timer and software interrupts by other interrupt controller models. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-11RISC-V: Use riscv prefix consistently on cpu helpersMichael Clark
* Add riscv prefix to raise_exception function * Add riscv prefix to CSR read/write functions * Add riscv prefix to signal handler function * Add riscv prefix to get fflags function * Remove redundant declaration of riscv_cpu_init and rename cpu_riscv_init to riscv_cpu_init * rename riscv_set_mode to riscv_cpu_set_mode Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-09RISC-V: Implement existential predicates for CSRsMichael Clark
CSR predicate functions are added to the CSR table. mstatus.FS and counter enable checks are moved to predicate functions and two new predicates are added to check misa.S for s* CSRs and a new PMP CPU feature for pmp* CSRs. Processors that don't implement S-mode will trap on access to s* CSRs and processors that don't implement PMP will trap on accesses to pmp* CSRs. PMP checks are disabled in riscv_cpu_handle_mmu_fault when the PMP CPU feature is not present. Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-08RISC-V: Implement modular CSR helper interfaceMichael Clark
Previous CSR code uses csr_read_helper and csr_write_helper to update CSR registers however this interface prevents atomic read/modify/write CSR operations; in addition there is no trap-free method to access to CSRs due to the monolithic CSR functions call longjmp. The current iCSR interface is not safe to be called by target/riscv/gdbstub.c as privilege checks or missing CSRs may call longjmp to generate exceptions. It needs to indicate existence so traps can be generated in the CSR instruction helpers. This commit moves CSR access from the monolithic switch statements in target/riscv/op_helper.c into modular read/write functions in target/riscv/csr.c using a new function pointer table for dispatch (which can later be used to allow CPUs to hook up model specific CSRs). A read/modify/write interface is added to support atomic CSR operations and a non-trapping interface is added to allow exception-free access to CSRs by the debugger. The CSR functions and CSR dispatch table are ordered to match The RISC-V Instruction Set Manual, Volume II: Privileged Architecture Version 1.10, 2.2 CSR Listing. An API is added to allow derived cpu instances to modify or implement new CSR operations. Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20RISC-V: Add hartid and \n to interrupt loggingMichael Clark
Add carriage return that was erroneously removed when converting to qemu_log. Change hard coded core number to the actual hartid. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Move non-ops from op_helper to cpu_helperMichael Clark
This patch makes op_helper.c contain only instruction operation helpers used by translate.c and moves any unrelated cpu helpers into cpu_helper.c. No logic is changed by this patch. Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-12 03:34:21 +0000