aboutsummaryrefslogtreecommitdiff
path: root/target/riscv/cpu.h
AgeCommit message (Collapse)Author
2021-10-29target/riscv: remove force HS exceptionJose Martins
There is no need to "force an hs exception" as the current privilege level, the state of the global ie and of the delegation registers should be enough to route the interrupt to the appropriate privilege level in riscv_cpu_do_interrupt. The is true for both asynchronous and synchronous exceptions, specifically, guest page faults which must be hardwired to zero hedeleg. As such the hs_force_except mechanism can be removed. Signed-off-by: Jose Martins <josemartins90@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211026145126.11025-3-josemartins90@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28target/riscv: Implement address masking functions required for RISC-V ↵Anatoly Parshintsev
Pointer Masking extension Signed-off-by: Anatoly Parshintsev <kupokupokupopo@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211025173609.2724490-8-space.monkey.delivers@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28target/riscv: Support CSRs required for RISC-V PM extension except for the ↵Alexey Baturo
h-mode Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211025173609.2724490-4-space.monkey.delivers@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28target/riscv: Add J-extension into RISC-VAlexey Baturo
Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211025173609.2724490-2-space.monkey.delivers@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22target/riscv: Add MXL/SXL/UXL to TB_FLAGSRichard Henderson
Begin adding support for switching XLEN at runtime. Extract the effective XLEN from MISA and MSTATUS and store for use during translation. Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20211020031709.359469-6-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22target/riscv: Replace riscv_cpu_is_32bit with riscv_cpu_mxlRichard Henderson
Shortly, the set of supported XL will not be just 32 and 64, and representing that properly using the enumeration will be imperative. Two places, booting and gdb, intentionally use misa_mxl_max to emphasize the use of the reset value of misa.mxl, and not the current cpu state. Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20211020031709.359469-5-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22target/riscv: Split misa.mxl and misa.extRichard Henderson
The hw representation of misa.mxl is at the high bits of the misa csr. Representing this in the same way inside QEMU results in overly complex code trying to check that field. Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20211020031709.359469-4-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22target/riscv: Move cpu_get_tb_cpu_state out of lineRichard Henderson
Move the function to cpu_helper.c, as it is large and growing. Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20211020031709.359469-2-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22target/riscv: fix TB_FLAGS bits overlapping bug for rvv/rvhFrank Chang
TB_FLAGS mem_idx bits was extended from 2 bits to 3 bits in commit: c445593, but other TB_FLAGS bits for rvv and rvh were not shift as well so these bits may overlap with each other when rvv is enabled. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211015074627.3957162-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07target/riscv: Set mstatus_hs.[SD|FS] bits if Clean and V=1 in mark_fs_dirty()Frank Chang
When V=1, both vsstauts.FS and HS-level sstatus.FS are in effect. Modifying the floating-point state when V=1 causes both fields to be set to 3 (Dirty). However, it's possible that HS-level sstatus.FS is Clean and VS-level vsstatus.FS is Dirty at the time mark_fs_dirty() is called when V=1. We can't early return for this case because we still need to set sstatus.FS to Dirty according to spec. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Vincent Chen <vincent.chen@sifive.com> Tested-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210921020234.123448-1-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07target/riscv: Remove RVB (replaced by Zb[abcs])Philipp Tomsich
With everything classified as Zb[abcs] and pre-0.93 draft-B instructions that are not part of Zb[abcs] removed, we can remove the remaining support code for RVB. Note that RVB has been retired for good and misa.B will neither mean 'some' or 'all of' Zb*: https://lists.riscv.org/g/tech-bitmanip/message/532 Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210911140016.834071-16-philipp.tomsich@vrull.eu Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07target/riscv: Add x-zba, x-zbb, x-zbc and x-zbs propertiesPhilipp Tomsich
The bitmanipulation ISA extensions will be ratified as individual small extension packages instead of a large B-extension. The first new instructions through the door (these have completed public review) are Zb[abcs]. This adds new 'x-zba', 'x-zbb', 'x-zbc' and 'x-zbs' properties for these in target/riscv/cpu.[ch]. Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210911140016.834071-5-philipp.tomsich@vrull.eu Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/core: Make do_unaligned_access noreturnRichard Henderson
While we may have had some thought of allowing system-mode to return from this hook, we have no guests that require this. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-21include/exec: Move cpu_signal_handler declarationRichard Henderson
There is nothing target specific about this. The implementation is host specific, but the declaration is 100% common. Reviewed-By: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-14target/riscv: Restrict cpu_exec_interrupt() handler to sysemuPhilippe Mathieu-Daudé
Restrict cpu_exec_interrupt() and its callees to sysemu. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210911165434.531552-19-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-08target/riscv: rvb: add b-ext version cpu optionFrank Chang
Default b-ext version is v0.93. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-18-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08target/riscv: rvb: support and turn on B-extension from command lineKito Cheng
B-extension is default off, use cpu rv32 or rv64 with x-b=true to enable B-extension. Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210505160620.15723-17-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08target/riscv: rvb: count leading/trailing zerosKito Cheng
Signed-off-by: Kito Cheng <kito.cheng@sifive.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210505160620.15723-3-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08target/riscv: Remove unnecessary riscv_*_names[] declarationBin Meng
riscv_excp_names[] and riscv_intr_names[] are only referenced by target/riscv/cpu.c locally. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210514052435.2203156-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08target/riscv: Do not include 'pmp.h' in user emulationPhilippe Mathieu-Daudé
Physical Memory Protection is a system feature. Avoid polluting the user-mode emulation by its definitions. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210516205333.696094-1-f4bug@amsat.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11target/riscv: Remove the hardcoded RVXLEN macroAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: a07bc0c6dc4958681b4f93cbc5d0acc31ed3344a.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Add a config option for ePMPHou Weiying
Add a config option to enable experimental support for ePMP. This is disabled by default and can be enabled with 'x-epmp=true'. Signed-off-by: Hongzheng-Li <Ethan.Lee.QNL@gmail.com> Signed-off-by: Hou Weiying <weiying_hou@outlook.com> Signed-off-by: Myriad-Dreamin <camiyoru@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: a22ccdaf9314078bc735d3b323f966623f8af020.1618812899.git.alistair.francis@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-11target/riscv: Add ePMP CSR access functionsHou Weiying
Signed-off-by: Hongzheng-Li <Ethan.Lee.QNL@gmail.com> Signed-off-by: Hou Weiying <weiying_hou@outlook.com> Signed-off-by: Myriad-Dreamin <camiyoru@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 270762cb2507fba6a9eeb99a774cf49f7da9cc32.1618812899.git.alistair.francis@wdc.com [ Changes by AF: - Rebase on master - Fix build errors - Fix some style issues ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-11target/riscv: Add the ePMP featureAlistair Francis
The spec is avaliable at: https://docs.google.com/document/d/1Mh_aiHYxemL0umN3GTTw8vsbmzHZ_nxZXgjgOUzbvc8 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 28c8855c80b0388a08c3ae009f5467e2b3960ce0.1618812899.git.alistair.francis@wdc.com
2021-05-11target/riscv: Use RISCVException enum for CSR accessAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 302b208f40373557fa11b351b5c9f43039ca8ea3.1617290165.git.alistair.francis@wdc.com
2021-05-11target/riscv: Use the RISCVException enum for CSR operationsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 8566c4c271723f27f3ae8fc2429f906a459f17ce.1617290165.git.alistair.francis@wdc.com
2021-05-11target/riscv: Use the RISCVException enum for CSR predicatesAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 187261fa671c3a77cf5aa482adb2a558c02a7cad.1617290165.git.alistair.francis@wdc.com
2021-05-11target/riscv: Add Shakti C class CPUVijai Kumar K
C-Class is a member of the SHAKTI family of processors from IIT-M. It is an extremely configurable and commercial-grade 5-stage in-order core supporting the standard RV64GCSUN ISA extensions. Signed-off-by: Vijai Kumar K <vijai@behindbytes.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210401181457.73039-2-vijai@behindbytes.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11target/riscv: Remove privilege v1.9 specific CSR related codeAtish Patra
Qemu doesn't support RISC-V privilege specification v1.9. Remove the remaining v1.9 specific references from the implementation. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210319194534.2082397-2-atish.patra@wdc.com> [Changes by AF: - Rebase on latest patches - Bump the vmstate_riscv_cpu version_id and minimum_version_id ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-22target/riscv: Add proper two-stage lookup exception detectionGeorg Kotheimer
The current two-stage lookup detection in riscv_cpu_do_interrupt falls short of its purpose, as all it checks is whether two-stage address translation either via the hypervisor-load store instructions or the MPRV feature would be allowed. What we really need instead is whether two-stage address translation was active when the exception was raised. However, in riscv_cpu_do_interrupt we do not have the information to reliably detect this. Therefore, when we raise a memory fault exception we have to record whether two-stage address translation is active. Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210319141459.1196741-1-georg.kotheimer@kernkonzept.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04target-riscv: support QMP dump-guest-memoryYifei Jiang
Add the support needed for creating prstatus elf notes. This allows us to use QMP dump-guest-memory. Now ELF notes of RISC-V only contain prstatus elf notes. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Mingwang Li <limingwang@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 20210201124458.1248-2-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04target/riscv: Declare csr_ops[] with a known sizeBin Meng
csr_ops[] is currently declared with an unknown size in cpu.h. Since the array size is known, let's do a complete declaration. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1611024723-14293-1-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-01-16target/riscv: Generate the GDB XML file for CSR registers dynamicallyBin Meng
At present QEMU RISC-V uses a hardcoded XML to report the feature "org.gnu.gdb.riscv.csr" [1]. There are two major issues with the approach being used currently: - The XML does not specify the "regnum" field of a CSR entry, hence consecutive numbers are used by the remote GDB client to access CSRs. In QEMU we have to maintain a map table to convert the GDB number to the hardware number which is error prone. - The XML contains some CSRs that QEMU does not implement at all, which causes an "E14" response sent to remote GDB client. Change to generate the CSR register list dynamically, based on the availability presented in the CSR function table. This new approach will reflect a correct list of CSRs that QEMU actually implements. [1] https://sourceware.org/gdb/current/onlinedocs/gdb/RISC_002dV-Features.html#RISC_002dV-Features Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210116054123.5457-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-01-16target/riscv: Add CSR name in the CSR function tableBin Meng
In preparation to generate the CSR register list for GDB stub dynamically, let's add the CSR name in the CSR function table. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1610427124-49887-3-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-01-16target/riscv: Make csr_ops[CSR_TABLE_SIZE] externalBin Meng
In preparation to generate the CSR register list for GDB stub dynamically, change csr_ops[] to non-static so that it can be referenced externally. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1610427124-49887-2-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-12-17target/riscv: Add a riscv_cpu_is_32bit() helper functionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: ebd37b237a8cbe457335b948bd57f487b6b31869.1608142916.git.alistair.francis@wdc.com
2020-12-17target/riscv: Add a TYPE_RISCV_CPU_BASE CPUAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 86e5ccd9eae2f5d8c2257679c6ccf6078a5d51af.1608142916.git.alistair.francis@wdc.com
2020-11-09target/riscv: Remove the hyp load and store functionsAlistair Francis
Remove the special Virtulisation load and store functions and just use the standard tcg tcg_gen_qemu_ld_tl() and tcg_gen_qemu_st_tl() functions instead. As part of this change we ensure we still run an access check to make sure we can perform the operations. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 189ac3e53ef2854824d18aad7074c6649f17de2c.1604464950.git.alistair.francis@wdc.com
2020-11-09target/riscv: Remove the HS_TWO_STAGE flagAlistair Francis
The HS_TWO_STAGE flag is no longer required as the MMU index contains the information if we are performing a two stage access. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: f514b128b1ff0fb41c85f914cee18f905007a922.1604464950.git.alistair.francis@wdc.com
2020-11-09target/riscv: Add a virtualised MMU ModeAlistair Francis
Add a new MMU mode that includes the current virt mode. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 4b301bc0ea36da962fc1605371b65019ac3073df.1604464950.git.alistair.francis@wdc.com
2020-11-03target/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unitYifei Jiang
mstatus/mstatush and vsstatus/vsstatush are two halved for RISCV32. This patch expands mstatus and vsstatus to uint64_t instead of target_ulong so that it can be saved as one unit and reduce some ifdefs in the code. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-2-jiangyifei@huawei.com
2020-10-22target/riscv: raise exception to HS-mode at get_physical_addressYifei Jiang
VS-stage translation at get_physical_address needs to translate pte address by G-stage translation. But the G-stage translation error can not be distinguished from VS-stage translation error in riscv_cpu_tlb_fill. On migration, destination needs to rebuild pte, and this G-stage translation error must be handled by HS-mode. So introduce TRANSLATE_STAGE2_FAIL so that riscv_cpu_tlb_fill could distinguish and raise it to HS-mode. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201014101728.848-1-jiangyifei@huawei.com [ Change by AF: - Clarify the fault_pte_addr shift ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-18qom: Remove module_obj_name parameter from OBJECT_DECLARE* macrosEduardo Habkost
One of the goals of having less boilerplate on QOM declarations is to avoid human error. Requiring an extra argument that is never used is an opportunity for mistakes. Remove the unused argument from OBJECT_DECLARE_TYPE and OBJECT_DECLARE_SIMPLE_TYPE. Coccinelle patch used to convert all users of the macros: @@ declarer name OBJECT_DECLARE_TYPE; identifier InstanceType, ClassType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_TYPE(InstanceType, ClassType, - lowercase, UPPERCASE); @@ declarer name OBJECT_DECLARE_SIMPLE_TYPE; identifier InstanceType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_SIMPLE_TYPE(InstanceType, - lowercase, UPPERCASE); Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200916182519.415636-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-09hw/riscv: clint: Avoid using hard-coded timebase frequencyBin Meng
At present the CLINT timestamp is using a hard-coded timebase frequency value SIFIVE_CLINT_TIMEBASE_FREQ. This might not be true for all boards. Add a new 'timebase-freq' property to the CLINT device, and update various functions to accept this as a parameter. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-16-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09target/riscv: cpu: Add a new 'resetvec' propertyBin Meng
Currently the reset vector address is hard-coded in a RISC-V CPU's instance_init() routine. In a real world we can have 2 exact same CPUs except for the reset vector address, which is pretty common in the RISC-V core IP licensing business. Normally reset vector address is a configurable parameter. Let's create a 64-bit property to store the reset vector address which covers both 32-bit and 64-bit CPUs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09target/riscv: Fix bug in getting trap cause name for trace_riscv_trapYifei Jiang
When the cause number is equal to or greater than 23, print "(unknown)" in trace_riscv_trap. The max valid number of riscv_excp_names is 23, so the last excpetion "guest_store_page_fault" can not be printed. In addition, the current check of cause is invalid for riscv_intr_names. So introduce riscv_cpu_get_trap_name to get the trap cause name. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200814035819.1214-1-jiangyifei@huawei.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09Use OBJECT_DECLARE_TYPE where possibleEduardo Habkost
Replace DECLARE_OBJ_CHECKERS with OBJECT_DECLARE_TYPE where the typedefs can be safely removed. Generated running: $ ./scripts/codeconverter/converter.py -i \ --pattern=DeclareObjCheckers $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200831210740.126168-16-ehabkost@redhat.com> Message-Id: <20200831210740.126168-17-ehabkost@redhat.com> Message-Id: <20200831210740.126168-18-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 15:58:33 +0000