| Age | Commit message (Collapse) | Author |
|---|
|
The hypervisor doorbells are used by skiboot and Linux on POWER9
processors to wake up secondaries.
This adds processor control support to the Server architecture by
reusing the Embedded support. They are very similar, only the bits
definition of the CPU identifier differ.
Still to be done is message broadcast to all threads of the same
processor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
We know that only one bit (in addition to SO) is going to be set in
the condition register, so do two movconds instead of three setconds,
three shifts and two ORs.
For ppc64-linux-user, the code size reduction is around 5% and the
performance improvement slightly less than 10%. For softmmu, the
improvement is around 5%.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
commit f03a1af581b9 ("ppc: Fix POWER7 and POWER8 exception definitions")
introduced definitions for the server doorbell exceptions by reusing
the embedded definitions but this adds complexity in the powerpc_excp()
routine. Let's introduce specific definitions for the Server doorbells
exception.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
When overwritting a valid TLB entry with a new one, the previous page
were not flushed in QEMU TLB, leading to incoherent mapping. This commit
fixes this.
Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
We recently had some discussions that were sidetracked for a while, because
nearly everyone misapprehended the purpose of the 'max_threads' field in
the compatiblity modes table. It's all about guest expectations, not host
expectations or support (that's handled elsewhere).
In an attempt to avoid a repeat of that confusion, rename the field to
'max_vthreads' and add an explanatory comment.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
|
|
Increases the max smt mode to 8 for Power9. That's because KVM supports
smt emulation in this platform so QEMU should allow users to use it as
well.
Today if we try to pass -smp ...,threads=8, QEMU will silently truncate
it to smt4 mode and may cause a crash if we try to perform a cpu
hotplug.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
[dwg: Added an explanatory comment]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
When constructing the "host" cpu class we modify whether the VMX and VSX
vector extensions and DFP (Decimal Floating Point) are available
based on whether KVM can support those instructions. This can depend on
policy in the host kernel as well as on the actual host cpu capabilities.
However, the way we probe for this is not very nice: we explicitly check
the host's device tree. That works in practice, but it's not really
correct, since the device tree is a property of the host kernel's platform
which we don't really know about. We get away with it because the only
modern POWER platforms happen to encode VMX, VSX and DFP availability in
the device tree in the same way.
Arguably we should have an explicit KVM capability for this, but we haven't
needed one so far. Barring specific KVM policies which don't yet exist,
each of these instruction classes will be available in the guest if and
only if they're available in the qemu userspace process. We can determine
that from the ELF AUX vector we're supplied with.
Once reworked like this, there are no more callers for kvmppc_get_vmx() and
kvmppc_get_dfp() so remove them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
As stated in the 1ad9f0a464fe commit log, the returned entries are not
a whole PTEG. It was not a problem before 1ad9f0a464fe as it would read
a single record assuming it contains a whole PTEG but now the code tries
reading the entire PTEG and "if ((n - i) < invalid)" produces negative
values which then are converted to size_t for memset() and that throws
seg fault.
This fixes the math.
While here, fix the last @i increment as well.
Fixes: 1ad9f0a464fe "target/ppc: Fix KVM-HV HPTE accessors"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Also introduce utilities to manipulate bitmasks (originaly from OPAL)
which be will be used in the model of the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
These are now trivial sets and tests against NULL. Unwrap.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
applied using ./scripts/clean-includes
not needed since 7ebaf795560
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
and use them in a couple of obvious places. Other macros will be used
in the model of the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
When a CPU is stopped with the 'stop-self' RTAS call, its state
'halted' is switched to 1 and, in this case, the MSR is not taken into
account anymore in the cpu_has_work() routine. Only the pending
hardware interrupts are checked with their LPCR:PECE* enablement bit.
If the DECR timer fires after 'stop-self' is called and before the CPU
'stop' state is reached, the nearly-dead CPU will have some work to do
and the guest will crash. This case happens very frequently with the
not yet upstream P9 XIVE exploitation mode. In XICS mode, the DECR is
occasionally fired but after 'stop' state, so no work is to be done
and the guest survives.
I suspect there is a race between the QEMU mainloop triggering the
timers and the TCG CPU thread but I could not quite identify the root
cause. To be safe, let's disable in the LPCR all the exceptions which
can cause an exit while the CPU is in power-saving mode and reenable
them when the CPU is started.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
and use the value to define precisely the default value of the LPCR in
the helper routine cpu_ppc_set_papr()
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Occasionally in Linux guests on x86_64 we're seeing logs like:
ppc_set_irq: 0x55b4e0d562f0 n_IRQ 8 level 1 => pending 00000100req 00000004
when they should read:
ppc_set_irq: 0x55b4e0d562f0 n_IRQ 8 level 1 => pending 00000100req 00000002
The "00000004" is CPU_INTERRUPT_EXITTB yet the code calls
cpu_interrupt(cs, CPU_INTERRUPT_HARD) ("00000002") in this function
just before the log message. Something is causing the HARD bit setting
to get lost.
The knock on effect of losing that bit is the decrementer timer interrupts
don't get delivered which causes the guest to sit idle in its idle handler
and 'hang'.
The issue occurs due to races from code which sets CPU_INTERRUPT_EXITTB.
Rather than poking directly into cs->interrupt_request, that code needs to:
a) hold BQL
b) use the cpu_interrupt() helper
This patch fixes the call sites to do this, fixing the hang. The calls
are made from a variety of contexts so a helper function is added to handle
the necessary locking. This can likely be improved and optimised in the future
but it ensures the code is correct and doesn't lockup as it stands today.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The msr invalidation code (commits 993eb and 2360b) inverts all
bits except MSR_TGPR and MSR_HVB. On non PowerPC 601 processors
this leads to incorrect change of excp_prefix in hreg_store_msr()
function. The problem is that new msr value get multiplied by msr_mask
and inverted msr does not, thus values of MSR_EP bit in new msr value
and inverted msr are distinct, so that excp_prefix changes but should
not.
Signed-off-by: Kurban Mallachiev <mallachiev@ispras.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
cpu->compat_pvr is used to store the current compat mode of the cpu.
On the receiving side during incoming migration we check compatibility
with the compat mode by calling ppc_set_compat(). However we fail to set
the compat mode with the hypervisor since the "new" compat mode doesn't
differ from the current (due to a "cpu->compat_pvr != compat_pvr" check).
This means that kvm runs the vcpus without a compat mode, which is the
incorrect behaviour. The implication being that a compatibility mode
will never be in effect after migration.
To fix this so that the compat mode is correctly set with the
hypervisor, store the desired compat mode and reset cpu->compat_pvr to
zero before calling ppc_set_compat().
Fixes: 5dfaa532 ("ppc: fix ppc_set_compat() with KVM PR")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Migration of a system under stress (for example, with
"stress-ng --numa 2") triggers on the destination
some kernel watchdog messages like:
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 3489660870s!
NMI watchdog: BUG: soft lockup - CPU#1 stuck for 3489660884s!
This problem appears with the changes introduced by
42043e4 spapr: clock should count only if vm is running
I think this commit only triggers the problem.
Kernel computes the soft lockup duration using the
Virtual Timebase register (VTB), not using the Timebase
Register (TBR, the one 42043e4 stops).
It appears VTB is not migrated, so this patch adds it in
the list of the SPRs to migrate, and fixes the problem.
For the migration, I've tested a migration from qemu-2.8.0 and
pseries-2.8.0 to a patched master (qemu-2.11.0-rc1). The received
VTB is 0 (as is it not initialized by qemu-2.8.0), but the value
seems to be ignored by KVM and a non zero VTB is used by the kernel.
I have no explanation for that, but as the original problem appears
only with SMP system under stress I suspect some problems in KVM
(I think because VTB is shared by all threads of a core).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
While trying to make KVM PR usable again, commit 5dfaa532ae introduced a
regression: the current compat_pvr value is passed to KVM instead of the
new one. This means that we always pass 0 instead of the max-cpu-compat
PVR during the initial machine reset. And at CAS time, we either pass
the PVR from the command line or even don't call kvmppc_set_compat() at
all, ie, the PCR will not be set as expected.
For example if we start a big endian fedora26 guest in power7 compat
mode on a POWER8 host, we get this in the guest:
$ cat /proc/cpuinfo
processor : 0
cpu : POWER7 (architected), altivec supported
clock : 4024.000000MHz
revision : 2.0 (pvr 004d 0200)
timebase : 512000000
platform : pSeries
model : IBM pSeries (emulated by qemu)
machine : CHRP IBM pSeries (emulated by qemu)
MMU : Hash
but the guest can still execute POWER8 instructions, and the following
program succeeds:
int main()
{
asm("vncipher 0,0,0"); // ISA 2.07 instruction
}
Let's pass the new compat_pvr to kvmppc_set_compat() and the program fails
with SIGILL as expected.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Capstone disassembler
# gpg: Signature made Thu 26 Oct 2017 10:57:27 BST
# gpg: using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-dis-20171026:
disas: Add capstone as submodule
disas: Remove monitor_disas_is_physical
ppc: Support Capstone in disas_set_info
arm: Support Capstone in disas_set_info
i386: Support Capstone in disas_set_info
disas: Support the Capstone disassembler library
disas: Remove unused flags arguments
target/arm: Don't set INSN_ARM_BE32 for CONFIG_USER_ONLY
target/arm: Move BE32 disassembler fixup
target/ppc: Convert to disas_set_info hook
target/i386: Convert to disas_set_info hook
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# target/i386/cpu.c
# target/ppc/translate_init.c
|
|
Fix the build for --disable-tcg.
Fixes: 55c3ceef61fcf06fc98ddc752b7cce788ce7680b
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20171026135814.20773-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Cc: qemu-ppc@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Now that every target is using the disas_set_info hook,
the flags argument is unused. Remove it.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This is identical for each target. So, move the initialization to
common code. Move the variable itself out of tcg_ctx and name it
cpu_env to minimize changes within targets.
This also means we can remove tcg_global_reg_new_{ptr,i32,i64},
since there are no longer global-register temps created by targets.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.
Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.
Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:
FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)
perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES
Then manually fixed the few errors that checkpatch reported.
Compile-tested for all targets.
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Move target cpu tcg initialization to common code,
called from cpu_exec_realizefn.
Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
When we used structures for TCGv_*, we needed a macro in order to
perform a comparison. Now that we use pointers, this is just clutter.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
* TCG 8-byte atomic accesses bugfix (Andrew)
* Report disk rotation rate (Daniel)
* Report invalid scsi-disk block size configuration (Mark)
* KVM and memory API MemoryListener fixes (David, Maxime, Peter Xu)
* x86 CPU hotplug crash fix (Igor)
* Load/store API documentation (Peter Maydell)
* Small fixes by myself and Thomas
* qdev DEVICE_DELETED deferral (Michael)
# gpg: Signature made Wed 18 Oct 2017 10:56:24 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (29 commits)
scsi: reject configurations with logical block size > physical block size
qdev: defer DEVICE_DEL event until instance_finalize()
Revert "qdev: Free QemuOpts when the QOM path goes away"
qdev: store DeviceState's canonical path to use when unparenting
qemu-pr-helper: use new libmultipath API
watch_mem_write: implement 8-byte accesses
notdirty_mem_write: implement 8-byte accesses
memory: reuse section_from_flat_range()
kvm: simplify kvm_align_section()
kvm: region_add and region_del is not called on updates
kvm: fix error message when failing to unregister slot
kvm: tolerate non-existing slot for log_start/log_stop/log_sync
kvm: fix alignment of ram address
memory: call log_start after region_add
target/i386: trap on instructions longer than >15 bytes
target/i386: introduce x86_ld*_code
tco: add trace events
docs/devel/loads-stores.rst: Document our various load and store APIs
nios2: define tcg_env
build: remove CONFIG_LIBDECNUMBER
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
use generic cpu_model parsing introduced by
(6063d4c0f vl.c: convert cpu_model to cpu type and set of global properties before machine_init())
it allows to:
* replace sPAPRMachineClass::tcg_default_cpu with
MachineClass::default_cpu_type
* drop cpu_parse_cpu_model() from hw/ppc/spapr.c and reuse
one in vl.c
* simplify spapr_get_cpu_core_type() by removing
not needed anymore recurrsion since alias look up
happens earlier at vl.c and spapr_get_cpu_core_type()
works only with resulted from that cpu type.
* spapr no more needs to parse/depend on being phased out
MachineState::cpu_model, all tha parsing done by generic
code and target specific callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
[dwg: Correct minor compile error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
next commit will drop ppc_cpu_lookup_alias() declaration from header
and make it static which will break its last user ppc_cpu_class_by_name()
since ppc_cpu_class_by_name() defined before ppc_cpu_lookup_alias().
To avoid this move ppc_cpu_lookup_alias() right before
ppc_cpu_class_by_name().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
consolidate 'host' core type registration by moving it from
KVM specific code into spapr_cpu_core.c, similar like it's
done in x86 target.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
replace sPAPRCPUCoreClass::cpu_class with cpu type name
since it were needed just to get that at points it were
accessed.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
there is a dedicated callback CPUClass::parse_features
which purpose is to convert -cpu features into a set of
global properties AND deal with compat/legacy features
that couldn't be directly translated into CPU's properties.
Create ppc variant of it (ppc_cpu_parse_featurestr) and
move 'compat=val' handling from spapr_cpu_core.c into it.
That removes a dependency of board/core code on cpu_model
parsing and would let to reuse common -cpu parsing
introduced by 6063d4c0
Set "max-cpu-compat" property only if it exists, in practice
it should limit 'compat' hack to spapr machine and allow
to avoid including machine/spapr headers in target/ppc/cpu.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
For POWER ISA v3.0, the XER bit CA32 needs to be set by the shift
right algebraic instructions whenever the CA bit is to be set. This
change affects the following instructions:
* Shift Right Algebraic Word (sraw[.])
* Shift Right Algebraic Word Immediate (srawi[.])
* Shift Right Algebraic Doubleword (srad[.])
* Shift Right Algebraic Doubleword Immediate (sradi[.])
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
At the moment the only POWER9 model which is listed in qemu is v1.0 (aka
"DD1"). This is a very early (read, buggy) version which will never be
released to the public - it was included in qemu only for the convenience
of those doing bringup on the early silicon. For bonus points, we actually
had its PVR incorrect in the table (0x004e0000 instead of 0x004e0100). We
also never actually implemented the differences in behaviour (read, bugs)
that marked DD1 in qemu.
Now that we know the PVR for the substantially better v2.0 (DD2) chip,
include it and make it the default POWER9 in qemu. For the time being we
leave the DD1 definition in place for the poor souls (read, me) who still
need to work with DD1 hardware.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
We don't have any 460 or 460F CPUs in QEMU, so the init functions
are just dead code. Let's simply remove them (translate_init.c
is already big enough without them).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
It is used by all PPC targets; we can give the directory its own
Makefile.objs file, and include it directly from target/ppc.
target/s390 can do the same when it starts using it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
'remotes/dgilbert/tags/pull-migration-20170927a' into staging
Migration pull 2017-09-27
# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170927a:
migration: Route more error paths
migration: Route errors up through vmstate_save
migration: wire vmstate_save_state errors up to vmstate_subsection_save
migration: Check field save returns
migration: check pre_save return in vmstate_save_state
migration: pre_save return int
migration: disable auto-converge during bulk block migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
When running with KVM PR, if a new HPT is allocated we need to inform
KVM about the HPT address and size. This is currently done by hacking
the value of SDR1 and pushing it to KVM in several places.
Also, migration breaks the guest since it is very unlikely the HPT has
the same address in source and destination, but we push the incoming
value of SDR1 to KVM anyway.
This patch introduces a new virtual hypervisor hook so that the spapr
code can provide the correct value of SDR1 to be pushed to KVM each
time kvmppc_put_books_sregs() is called.
It allows to get rid of all the hacking in the spapr/kvmppc code and
it fixes migration of nested KVM PR.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Remove *all* unused CPU definitions as indicated by compile-time
`#if 0` constructs.
Signed-off-by: John Snow <jsnow@redhat.com>
[dwg: Removed some additional now-useless comments]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Following commit aef77960, remove now-unused definitions from
cpu-models.h.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The use of KVM_PPC_GET_HTAB_FD is open-coded in kvmppc_read_hptes()
and kvmppc_write_hpte().
This patch modifies kvmppc_get_htab_fd() so that it can be used
everywhere we need to access the in-kernel htab:
- add an index argument
=> only kvmppc_read_hptes() passes an actual index, all other users
pass 0
- add an errp argument to propagate error messages to the caller.
=> spapr migration code prints the error
=> hpte helpers pass &error_abort to keep the current behavior
of hw_error()
While here, this also fixes a bug in kvmppc_write_hpte() so that it
opens the htab fd for writing instead of reading as it currently does.
This never broke anything because we currently never call this code,
as explained in the changelog of commit c1385933804bb:
"This support updating htab managed by the hypervisor. Currently
we don't have any user for this feature. This actually bring the
store_hpte interface in-line with the load_hpte one. We may want
to use this when we want to emulate henter hcall in qemu for HV
kvm."
The above is still true today.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
When kvmppc_get_htab_fd() fails, its return value is propagated up to
qemu_savevm_state_iterate() or to qemu_savevm_state_complete_precopy().
All savevm handlers expect to receive a negative errno on error.
Let's patch kvmppc_get_htab_fd() accordingly.
While here, let's change htab_load() in the spapr code to also
propagate the error, since it doesn't make sense to abort() if
we couldn't get the htab fd from KVM.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Despite its name it is a 440 core CPU
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
