aboutsummaryrefslogtreecommitdiff
path: root/target/ppc/translate_init.inc.c
AgeCommit message (Collapse)Author
2019-10-04ppc/kvm: Skip writing DPDES back when in run time stateAlexey Kardashevskiy
On POWER8 systems the Directed Privileged Door-bell Exception State register (DPDES) stores doorbell pending status, one bit per a thread of a core, set by "msgsndp" instruction. The register is shared among threads of the same core and KVM on POWER9 emulates it in a similar way (POWER9 does not have DPDES). DPDES is shared but QEMU assumes all SPRs are per thread so the only safe way to write DPDES back to VCPU before running a guest is doing so while all threads are pulled out of the guest so DPDES cannot change. There is only one situation when this condition is met: incoming migration when all threads are stopped. Otherwise any QEMU HMP/QMP command causing kvm_arch_put_registers() (for example printing registers or dumping memory) can clobber DPDES in a race with other vcpu threads. This changes DPDES handling so it is not written to KVM at runtime. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20190923084110.34643-1-aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-29powerpc/spapr: Add host threads parameter to ibm,get_system_parameterSuraj Jitindar Singh
The ibm,get_system_parameter rtas call is used by the guest to retrieve data relating to certain parameters of the system. The SPLPAR characteristics option (token 20) is used to determine characteristics of the environment in which the lpar will run. It may be useful for a guest to know the number of physical host threads present on the underlying system where it is being run. Add the characteristic "HostThrs" to the SPLPAR Characteristics ibm,get_system_parameter rtas call to expose this information to a guest. Add a n_host_threads property to the processor class which is then used to retrieve this information and define it for POWER8 and POWER9. Other processors will default to 0 and the charateristic won't be added. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190827045751.22123-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-29target/ppc: Set float_tininess_before_rounding at cpu resetRichard Henderson
As defined in Power 3.0 section 4.4.4 "Underflow Exception", a tiny result is detected before rounding. Fixes: https://bugs.launchpad.net/qemu/+bug/1841491 Reported-by: Paul Clarke <pc@us.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190827020013.27154-1-richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190821' ↵Peter Maydell
into staging ppc patch queue for 2019-08-21 First ppc and spapr pull request for qemu-4.2. Includes: * Some TCG emulation fixes and performance improvements * Support for the mffsl instruction in TCG * Added missing DPDES SPR * Some enhancements to the emulation of the XIVE interrupt controller * Cleanups to spapr MSI management * Some new suspend/resume infrastructure and a draft suspend implementation for spapr * New spapr hypercall for TPM communication (will be needed for secure guests under an Ultravisor) * Fix several memory leaks And a few other assorted fixes. # gpg: Signature made Wed 21 Aug 2019 08:24:44 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.2-20190821: (42 commits) ppc: Fix emulated single to double denormalized conversions ppc: Fix emulated INFINITY and NAN conversions ppc: conform to processor User's Manual for xscvdpspn ppc: Add support for 'mffsl' instruction target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPR spapr/xive: Mask the EAS when allocating an IRQ spapr: Implement better workaround in spapr-vty device spapr/irq: Drop spapr_irq_msi_reset() spapr/pci: Free MSIs during reset spapr/pci: Consolidate de-allocation of MSIs ppc: remove idle_timer logic spapr: Implement ibm,suspend-me i386: use machine class ->wakeup method machine: Add wakeup method to MachineClass ppc/xive: Improve 'info pic' support ppc/xive: Provide silent escalation support ppc/xive: Provide unconditional escalation support ppc/xive: Provide escalation support ppc/xive: Provide backlog support ppc/xive: Implement TM_PULL_OS_CTX special command ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPRAlexey Kardashevskiy
DPDES stores a status of a doorbell message and if it is lost in migration, the destination CPU won't receive it. This does not hit us much as IPIs complete too quick to catch a pending one and even if we missed one, broadcasts happen often enough to wake that CPU. This defines DPDES and registers with KVM for migration. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20190816061733.53572-1-aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21spapr: Implement dispatch tracking for tcgNicholas Piggin
Implement cpu_exec_enter/exit on ppc which calls into new methods of the same name in PPCVirtualHypervisorClass. These are used by spapr to implement the splpar VPA dispatch counter initially. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20190718034214.14948-2-npiggin@gmail.com> [dwg: Removed unnecessary CONFIG_USER_ONLY checks as suggested by gkurz] Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21target/ppc: move opcode decode tables to PowerPCCPUAlex Bennée
The opcode decode tables aren't really part of the CPUPPCState but an internal implementation detail for the translator. This can cause problems with memcpy in cpu_copy as any table created during ppc_cpu_realize get written over causing a memory leak. To avoid this move the tables into PowerPCCPU which is better suited to hold internal implementation details. Attempts to fix: https://bugs.launchpad.net/qemu/+bug/1836558 Cc: 1836558@bugs.launchpad.net Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190716121352.302-1-alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-20icount: remove unnecessary gen_io_end callsPavel Dovgalyuk
Prior patch resets can_do_io flag at the TB entry. Therefore there is no need in resetting this flag at the end of the block. This patch removes redundant gen_io_end calls. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
2019-07-02qapi: Split machine-target.json off target.json and misc.jsonMarkus Armbruster
Move commands query-cpu-definitions, query-cpu-model-baseline, query-cpu-model-comparison, and query-cpu-model-expansion with their types from target.json to machine-target.json. Also move types CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from misc.json there. Add machine-target.json to MAINTAINERS section "Machine core". Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-13-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [Commit message typo fixed]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-11qemu-common: Move tcg_enabled() etc. to sysemu/tcg.hMarkus Armbruster
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h, sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in qemu-common.h. This necessitates inclusion of qemu-common.h into headers, which is against the rules spelled out in qemu-common.h's file comment. Move tcg_enabled() & friends into their own header sysemu/tcg.h, and adjust #include directives. Cc: Richard Henderson <rth@twiddle.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Rebased with conflicts resolved automatically, except for accel/tcg/tcg-all.c]
2019-06-10cpu: Introduce cpu_set_cpustate_pointersRichard Henderson
Consolidate some boilerplate from foo_cpu_initfn. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/ppc: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace ppc_env_get_cpu with env_archcpu. The combination CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10target/ppc: Convert to CPUClass::tlb_fillRichard Henderson
Cc: qemu-ppc@nongnu.org Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-26target/ppc: Style fixes for translate_init.inc.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-04-18disas: Rename include/disas/bfd.h back to include/disas/dis-asm.hMarkus Armbruster
Commit dc99065b5f9 (v0.1.0) added dis-asm.h from binutils. Commit 43d4145a986 (v0.1.5) inlined bfd.h into dis-asm.h to remove the dependency on binutils. Commit 76cad71136b (v1.4.0) moved dis-asm.h to include/disas/bfd.h. The new name is confusing when you try to match against (pre GPLv3+) binutils. Rename it back. Keep it in the same directory, of course. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190417191805.28198-17-armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-04-18target: Simplify how the TARGET_cpu_list() printMarkus Armbruster
The various TARGET_cpu_list() take an fprintf()-like callback and a FILE * to pass to it. Their callers (vl.c's main() via list_cpus(), bsd-user/main.c's main(), linux-user/main.c's main()) all pass fprintf() and stdout. Thus, the flexibility provided by the (rather tiresome) indirection isn't actually used. Drop the callback, and call qemu_printf() instead. Calling printf() would also work, but would make the code unsuitable for monitor context without making it simpler. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190417191805.28198-10-armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-12target/ppc: add HV support for POWER9Cédric Le Goater
We now have enough support to boot a PowerNV machine with a POWER9 processor. Allow HV mode on POWER9. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-16-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc: Implement large decrementer support for TCGSuraj Jitindar Singh
Prior to POWER9 the decrementer was a 32-bit register which decremented with each tick of the timebase. From POWER9 onwards the decrementer can be set to operate in a mode called large decrementer where it acts as a n-bit decrementing register which is visible as a 64-bit register, that is the value of the decrementer is sign extended to 64 bits (where n is implementation dependant). The mode in which the decrementer operates is controlled by the LPCR_LD bit in the logical paritition control register (LPCR). >From POWER9 onwards the HDEC (hypervisor decrementer) was enlarged to h-bits, also sign extended to 64 bits (where h is implementation dependant). Note this isn't configurable and is always enabled. On POWER9 the large decrementer and hdec are both 56 bits, as represented by the lrg_decr_bits cpu class property. Since they are the same size we only add one property for now, which could be extended in the case they ever differ in the future. We also add the lrg_decr_bits property for POWER5+/7/8 since it is used to determine the size of the hdec, which is only generated on the POWER5+ processor and later. On these processors it is 32 bits. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190301024317.22137-2-sjitindarsingh@gmail.com> [dwg: Small style fixes] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Flush the TLB locally when the LPIDR is writtenBenjamin Herrenschmidt
Our TCG TLB only tags whether it's a HV vs a guest access, so it must be flushed when the LPIDR is changed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190215170029.15641-10-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Add support for LPCR:HEIC on POWER9Benjamin Herrenschmidt
This controls whether the External Interrupt (0x500) can be delivered to the hypervisor or not. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190215161648.9600-11-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Add POWER9 external interrupt modelBenjamin Herrenschmidt
Adds support for the Hypervisor directed interrupts in addition to the OS ones. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - modified the icp_realize() and xive_tctx_realize() to take into account explicitely the POWER9 interrupt model - introduced a specific power9_set_irq for POWER9 ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190215161648.9600-10-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Add Hypervisor Virtualization Interrupt on POWER9Benjamin Herrenschmidt
This adds support for delivering that exception Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190215161648.9600-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Add POWER9 exception modelBenjamin Herrenschmidt
And use it to get the correct HILE bit in HID0 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190215161648.9600-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Fix support for "STOP light" states on POWER9Benjamin Herrenschmidt
STOP must act differently based on PSSCR:EC on POWER9. When set, it acts like the P7/P8 power management instructions and wake up at 0x100 based on the wakeup conditions in LPCR. When PSSCR:EC is clear however it will wakeup at the next instruction after STOP (if EE is clear) or take the corresponding interrupts (if EE is set). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190215161648.9600-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190219' ↵Peter Maydell
into staging ppc patch queue 2019-02-19 Here's the next batch of ppc and spapr patches. Higlights are: * A bunch of improvements to TCG handling of vector instructions from Richard Henderson and Marc Cave-Ayland * Cleanup to the XICS interrupt controller from Greg Kurz, removing the special KVM subclasses which were a bad idea * Some refinements to the XIVE interrupt controller from Cédric Le Goater * Fix from Fabiano Rosas for a really dumb buffer overflow in the device tree code for memory hotplug * Code for allowing access to SPRs from the gdb stub from Fabiano Rosas * Assorted minor fixes and cleanups # gpg: Signature made Mon 18 Feb 2019 13:47:54 GMT # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.0-20190219: (43 commits) target/ppc: convert vmin* and vmax* to vector operations target/ppc: convert vadd*s and vsub*s to vector operations target/ppc: Split out VSCR_SAT to a vector field target/ppc: Add set_vscr_sat target/ppc: Use mtvscr/mfvscr for vmstate target/ppc: Add helper_mfvscr target/ppc: Remove vscr_nj and vscr_sat target/ppc: Use helper_mtvscr for reset and gdb target/ppc: Pass integer to helper_mtvscr target/ppc: convert xxsel to vector operations target/ppc: convert xxspltw to vector operations target/ppc: convert xxspltib to vector operations target/ppc: convert VSX logical operations to vector operations target/ppc: convert vsplt[bhw] to use vector operations target/ppc: convert vspltis[bhw] to use vector operations target/ppc: convert vaddu[b,h,w,d] and vsubu[b,h,w,d] over to use vector operations target/ppc: convert VMX logical instructions to use vector operations xics: Drop the KVM ICS class spapr/irq: Use the "simple" ICS class for KVM xics: Handle KVM interrupt presentation from "simple" ICS code ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-18qapi: make query-cpu-definitions depend on specific targetsMarc-André Lureau
It depends on TARGET_PPC || TARGET_ARM || TARGET_I386 || TARGET_S390X. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-15-armbru@redhat.com>
2019-02-18target/ppc: Add helper_mfvscrRichard Henderson
This is required before changing the representation of the register. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190215100058.20015-13-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18target/ppc: Use helper_mtvscr for reset and gdbRichard Henderson
Not setting flush_to_zero from gdb_set_avr_reg was a bug. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190215100058.20015-11-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-17target/ppc: Disable ISA 2.06 PM instructions on POWER9Benjamin Herrenschmidt
The ISA 2.06/2.07 Power Management instructions (doze, nap & rvwinkle) don't exist on POWER9, don't enable them. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190128094625.4428-13-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-17target/ppc: Enable reporting of SPRs to GDBFabiano Rosas
This allows reading and writing of SPRs via GDB: (gdb) p/x $srr1 $1 = 0x8000000002803033 (gdb) p/x $pvr $2 = 0x4b0201 (gdb) set $pvr=0x4b0000 (gdb) p/x $pvr $3 = 0x4b0000 The `info` command can also be used: (gdb) info registers spr For this purpose, GDB needs to be provided with an XML description of the registers (see the gdb-xml directory for examples) and a set of callbacks for reading and writing the registers must be defined. The XML file in this case is created dynamically, based on the SPRs already defined in the machine. This way we avoid the need for several XML files to suit each possible ppc machine. The gdb_{get,set}_spr_reg callbacks take an index based on the order the registers appear in the XML file. This index does not match the actual location of the registers in the env->spr array so the gdb_find_spr_idx function does that conversion. Note: GDB currently needs to know the guest endianness in order to properly print the registers values. This is done automatically by GDB when provided with the ELF file or explicitly with the `set endian <big|little>` command. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-24ppc: e6500 registers SPR 604 twiceJon Diekema
When using the e6500 CPU, QEMU generates a fatal error after complaining about registering SPR 604 twice. Building and testing with commit 9b2e891ec5ccdb4a7d583b77988848282606fdea shows the issue: qemu-system-ppc64 --version QEMU emulator version 3.1.50 (v3.1.0-456-g9b2e891ec5-dirty) Copyright (c) 2003-2018 Fabrice Bellard and the QEMU Project developers qemu-system-ppc64 -M none -cpu e6500 Error: Trying to register SPR 604 (25c) twice ! Signed-off-by: Jon Diekema <jon.diekema@ge.com> Message-Id: <CALvuzg43uSodseEHjNaRcPFBKKPTY2mcppUbYgiLL=QO9RxX_Q@mail.gmail.com> [removed duplicated mail header in the commit message] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-09target/ppc: move FP and VMX registers into aligned vsr register arrayMark Cave-Ayland
The VSX register array is a block of 64 128-bit registers where the first 32 registers consist of the existing 64-bit FP registers extended to 128-bit using new VSR registers, and the last 32 registers are the VMX 128-bit registers as show below: 64-bit 64-bit +--------------------+--------------------+ | FP0 | | VSR0 +--------------------+--------------------+ | FP1 | | VSR1 +--------------------+--------------------+ | ... | ... | ... +--------------------+--------------------+ | FP30 | | VSR30 +--------------------+--------------------+ | FP31 | | VSR31 +--------------------+--------------------+ | VMX0 | VSR32 +-----------------------------------------+ | VMX1 | VSR33 +-----------------------------------------+ | ... | ... +-----------------------------------------+ | VMX30 | VSR62 +-----------------------------------------+ | VMX31 | VSR63 +-----------------------------------------+ In order to allow for future conversion of VSX instructions to use TCG vector operations, recreate the same layout using an aligned version of the existing vsr register array. Since the old fpr and avr register arrays are removed, the existing callers must also be updated to use the correct offset in the vsr register array. This also includes switching the relevant VMState fields over to using subarrays to make sure that migration is preserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21target/ppc: use g_new(T, n) instead of g_malloc(sizeof(T) * n)Greg Kurz
Because it is a recommended coding practice (see HACKING). Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08target/ppc: Add one reg id for ptcrSuraj Jitindar Singh
The ptcr (partition table control register) is used to store the address and size of the partition table. For nested kvm-hv we have a level 1 guest register the location of it's partition table with the hypervisor. Thus to support migration we need to be able to read this out of kvm and restore it post migration. Add the one reg id for the ptcr. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08target/ppc: add external PID supportRoman Kapl
External PID is a mechanism present on BookE 2.06 that enables application to store/load data from different address spaces. There are special version of some instructions, which operate on alternate address space, which is specified in the EPLC/EPSC regiser. This implementation uses two additional MMU modes (mmu_idx) to provide the address space for the load and store instructions. The QEMU TLB fill code was modified to recognize these MMU modes and use the values in EPLC/EPSC to find the proper entry in he PPC TLB. These two QEMU TLBs are also flushed on each write to EPLC/EPSC. Following instructions are implemented: dcbfep dcbstep dcbtep dcbtstep dcbzep dcbzlep icbiep lbepx ldepx lfdepx lhepx lwepx stbepx stdepx stfdepx sthepx stwepx. Following vector instructions are not: evlddepx evstddepx lvepx lvepxl stvepx stvepxl. Signed-off-by: Roman Kapl <rka@sysgo.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-10-19cpus hw target: Use warn_report() & friends to report warningsMarkus Armbruster
Calling error_report() in a function that takes an Error ** argument is suspicious. Convert a few that are actually warnings to warn_report(). While there, split a warning consisting of multiple sentences to conform to conventions spelled out in warn_report()'s contract. Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Fam Zheng <famz@redhat.com> Cc: Wei Huang <wei@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20181017082702.5581-5-armbru@redhat.com>
2018-08-28ppc: Remove deprecated ppcemb targetThomas Huth
There is no known available OS for ppc around anymore that uses page sizes below 4k, so it does not make much sense that we keep wasting our time on building and testing the ppcemb-softmmu target. It has been deprecated since two releases, and nobody complained, so let's remove this now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21ppc: add DBCR based debuggingRoman Kapl
Add support for DBCR (debug control register) based debugging as used on BookE ppc. So far supports only branch and single-step events, but these are the important ones. GDB in Linux guest can now do single-stepping. Signed-off-by: Roman Kapl <rka@sysgo.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21target/ppc: Enable fp exceptions for user-onlyRichard Henderson
While just setting the MSR bits is sufficient, we can tidy the helper code by extracting the MSR test to a helper and then forcing it true for user-only. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03target/ppc: Add do_unaligned_access hookRichard Henderson
This allows faults from MO_ALIGN to have the same effect as from gen_check_align. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-16target/ppc, spapr: Move VPA information to machine_dataDavid Gibson
CPUPPCState currently contains a number of fields containing the state of the VPA. The VPA is a PAPR specific concept covering several guest/host shared memory areas used to communicate some information with the hypervisor. As a PAPR concept this is really machine specific information, although it is per-cpu, so it doesn't really belong in the core CPU state structure. There's also other information that's per-cpu, but platform/machine specific. So create a (void *)machine_data in PowerPCCPU which can be used by the machine to locate per-cpu data. Intialization, lifetime and cleanup of machine_data is entirely up to the machine type. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org>
2018-06-12target/ppc: Allow PIR read in privileged modeluporl
According to PowerISA, the PIR register should be readable in privileged mode also, not only in hypervisor privileged mode. PowerISA 3.0 - 4.3.3 Processor Identification Register "Read access to the PIR is privileged; write access is not provided." Figure 18 in section 4.4.4 explicitly confirms that mfspr PIR is privileged and doesn't require hypervisor state. Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: qemu-ppc@nongnu.org Signed-off-by: Leandro Lupori <leandro.lupori@gmail.com> Reviewed-by: Jose Ricardo Ziviani <joserz@linux.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12target/ppc: Allow privileged access to SPR_PCRJoel Stanley
The powerpc Linux kernel[1] and skiboot firmware[2] recently gained changes that cause the Processor Compatibility Register (PCR) SPR to be cleared. These changes cause Linux to fail to boot on the Qemu powernv machine with an error: Trying to write privileged spr 338 (0x152) at 0000000030017f0c With this patch Qemu makes this register available as a hypervisor privileged register. Note that bits set in this register disable features of the processor. Currently the only register state that is supported is when the register is zeroed (enable all features). This is sufficient for guests to once again boot. [1] https://lkml.kernel.org/r/20180518013742.24095-1-mikey@neuling.org [2] https://patchwork.ozlabs.org/patch/915932/ Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-05-29ppc: Rename 2.13 machines to 3.0Peter Maydell
Rename the 2.13 machines to match the number we're going to use for the next release. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-id: 20180522104000.9044-5-peter.maydell@linaro.org
2018-05-11rename included C files to foo.inc.c, remove osdep.hPaolo Bonzini
osdep.h is only needed for files that are compiled directly. Remove it from included C source files, and rename them to *.inc.c so that scripts/clean-includes knows to skip them. Cc: Eric Blake <eblake@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-18 01:57:28 +0000