aboutsummaryrefslogtreecommitdiff
path: root/target/ppc/mem_helper.c
AgeCommit message (Collapse)Author
2021-05-04target/ppc: Remove env->immu_idx and env->dmmu_idxRichard Henderson
We weren't recording MSR_GS in hflags, which means that BookE memory accesses were essentially random vs Guest State. Instead of adding this bit directly, record the completed mmu indexes instead. This makes it obvious that we are recording exactly the information that we need. This also means that we can stop directly recording MSR_IR. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210323184340.619757-9-richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-11-15powerpc tcg: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201019061126.3102-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-03target/ppc: Use probe_write for DCBZRichard Henderson
Using probe_write instead of tlb_vaddr_to_host means that we process watchpoints and notdirty pages more efficiently. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200129235040.24022-5-richard.henderson@linaro.org> Tested-by: Howard Spoelstra <hsp.cat7@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-03target/ppc: Remove redundant mask in DCBZRichard Henderson
The value of addr has already been masked, just above. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200129235040.24022-4-richard.henderson@linaro.org> Tested-by: Howard Spoelstra <hsp.cat7@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-03target/ppc: Use probe_access for LMW, STMWRichard Henderson
Use a minimum number of mmu lookups for the contiguous bytes that are accessed. If the lookup succeeds, we can finish the operation with host addresses only. Reported-by: Howard Spoelstra <hsp.cat7@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200129235040.24022-3-richard.henderson@linaro.org> Tested-by: Howard Spoelstra <hsp.cat7@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-03target/ppc: Use probe_access for LSW, STSWRichard Henderson
Use a minimum number of mmu lookups for the contiguous bytes that are accessed. If the lookup succeeds, we can finish the operation with host addresses only. Reported-by: Howard Spoelstra <hsp.cat7@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200129235040.24022-2-richard.henderson@linaro.org> Tested-by: Howard Spoelstra <hsp.cat7@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-15tcg: Search includes from the project root source directoryPhilippe Mathieu-Daudé
We currently search both the root and the tcg/ directories for tcg files: $ git grep '#include "tcg/' | wc -l 28 $ git grep '#include "tcg[^/]' | wc -l 94 To simplify the preprocessor search path, unify by expliciting the tcg/ directory. Patch created mechanically by running: $ for x in \ tcg.h tcg-mo.h tcg-op.h tcg-opc.h \ tcg-op-gvec.h tcg-gvec-desc.h; do \ sed -i "s,#include \"$x\",#include \"tcg/$x\"," \ $(git grep -l "#include \"$x\""); \ done Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200101112303.20724-2-philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15target/ppc: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIXRichard Henderson
There are only two uses. Within dcbz_common, the local variable mmu_idx already contains the epid computation, and we can avoid repeating it for the store. Within helper_icbiep, the usage is trivially expanded using PPC_TLB_EPID_LOAD. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02target/ppc: decode target register in VSX_VECTOR_LOAD_STORE_LENGTH at ↵Mark Cave-Ayland
translation time Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190616123751.781-14-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02target/ppc: remove getVSR()/putVSR() from mem_helper.cMark Cave-Ayland
Since commit 8a14d31b00 "target/ppc: switch fpr/vsrl registers so all VSX registers are in host endian order" functions getVSR() and putVSR() which used to convert the VSR registers into host endian order are no longer required. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20190616123751.781-3-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-26target/ppc: Style fixes for mem_helper.cDavid Gibson
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2018-11-08target/ppc: add external PID supportRoman Kapl
External PID is a mechanism present on BookE 2.06 that enables application to store/load data from different address spaces. There are special version of some instructions, which operate on alternate address space, which is specified in the EPLC/EPSC regiser. This implementation uses two additional MMU modes (mmu_idx) to provide the address space for the load and store instructions. The QEMU TLB fill code was modified to recognize these MMU modes and use the values in EPLC/EPSC to find the proper entry in he PPC TLB. These two QEMU TLBs are also flushed on each write to EPLC/EPSC. Following instructions are implemented: dcbfep dcbstep dcbtep dcbtstep dcbzep dcbzlep icbiep lbepx ldepx lfdepx lhepx lwepx stbepx stdepx stfdepx sthepx stwepx. Following vector instructions are not: evlddepx evstddepx lvepx lvepxl stvepx stvepxl. Signed-off-by: Roman Kapl <rka@sysgo.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-10-18target/ppc: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128Richard Henderson
Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-03target/ppc: Use atomic cmpxchg for STQCXRichard Henderson
When running in a parallel context, we must use a helper in order to perform the 128-bit atomic operation. When running in a serial context, do the compare before the store. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03target/ppc: Use atomic store for STQRichard Henderson
Section 1.4 of the Power ISA v3.0B states that this insn is single-copy atomic. As we cannot (yet) issue 128-bit stores within TCG, use the generic helpers provided. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03target/ppc: Use atomic load for LQ and LQARXRichard Henderson
Section 1.4 of the Power ISA v3.0B states that both of these instructions are single-copy atomic. As we cannot (yet) issue 128-bit loads within TCG, use the generic helpers provided. Since TCG cannot (yet) return a 128-bit value, add a slot within CPUPPCState for returning the high half of a 128-bit return value. This solution is preferred to the helper assigning to architectural registers directly, as it avoids clobbering all TCG live values. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-08-31ppc: use DIV_ROUND_UPMarc-André Lureau
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-31target-ppc: implement stxvll instructionsNikunj A Dadhania
stxvll: Store VSX Vector Left-justified with Length Vector (8-bit elements) in BE/LE: +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ |“T”|“h”|“i”|“s”|“ ”|“i”|“s”|“ ”|“a”|“ ”|“T”|“E”|“S”|“T”|00|00| +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ Storing 14 bytes would result in following Little/Big-endian Storage: +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ |“T”|“h”|“i”|“s”|“ ”|“i”|“s”|“ ”|“a”|“ ”|“T”|“E”|“S”|“T”|FF|FF| +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31target-ppc: implement stxvl instructionNikunj A Dadhania
stxvl: Store VSX Vector with Length Vector (8-bit elements) in BE: +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ |“T”|“h”|“i”|“s”|“ ”|“i”|“s”|“ ”|“a”|“ ”|“T”|“E”|“S”|“T”|00|00| +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ Vector (8-bit elements) in LE: +--+--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ |00|00|“T”|“S”|“E”|“T”|“ ”|“a”|“ ”|“s”|“i”|“ ”|“s”|“i”|"h"|"T"| +--+--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ Storing 14 bytes would result in following Little/Big-endian Storage: +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ |“T”|“h”|“i”|“s”|“ ”|“i”|“s”|“ ”|“a”|“ ”|“T”|“E”|“S”|“T”|FF|FF| +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31target-ppc: implement lxvll instructionNikunj A Dadhania
lxvll: Load VSX Vector Left-justified with Length Little/Big-endian Storage: +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ |“T”|“h”|“i”|“s”|“ ”|“i”|“s”|“ ”|“a”|“ ”|“T”|“E”|“S”|“T”|FF|FF| +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ Loading 14 bytes to vector (8-bit elements) in BE/LE: +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ |“T”|“h”|“i”|“s”|“ ”|“i”|“s”|“ ”|“a”|“ ”|“T”|“E”|“S”|“T”|00|00| +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31target-ppc: implement lxvl instructionNikunj A Dadhania
lxvl: Load VSX Vector with Length Little/Big-endian Storage: +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ |“T”|“h”|“i”|“s”|“ ”|“i”|“s”|“ ”|“a”|“ ”|“T”|“E”|“S”|“T”|FF|FF| +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ Loading 14 bytes results in: Vector (8-bit elements) in BE: +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ |“T”|“h”|“i”|“s”|“ ”|“i”|“s”|“ ”|“a”|“ ”|“T”|“E”|“S”|“T”|00|00| +---+---+---+---+---+---+---+---+---+---+---+---+---+---+--+--+ Vector (8-bit elements) in LE: +--+--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ |00|00|“T”|“S”|“E”|“T”|“ ”|“a”|“ ”|“s”|“i”|“ ”|“s”|“i”|"h"|"T"| +--+--+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 16:12:40 +0000