aboutsummaryrefslogtreecommitdiff
path: root/target/mips
AgeCommit message (Collapse)Author
2021-07-11target/mips/tx79: Introduce LQ opcode (Load Quadword)Philippe Mathieu-Daudé
Introduce the LQ opcode (Load Quadword) and remove unreachable code. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-26-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-11target/mips/tx79: Introduce PROT3W opcode (Parallel Rotate 3 Words)Philippe Mathieu-Daudé
Introduce the PROT3W opcode (Parallel Rotate 3 Words). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-25-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-11target/mips/tx79: Introduce PPACW opcode (Parallel Pack to Word)Philippe Mathieu-Daudé
Introduce the PPACW opcode (Parallel Pack to Word). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-22-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-11target/mips/tx79: Introduce PCGT* (Parallel Compare for Greater Than)Philippe Mathieu-Daudé
Introduce the 'Parallel Compare for Greater Than' opcodes: - PCGTB (Parallel Compare for Greater Than Byte) - PCGTH (Parallel Compare for Greater Than Halfword) - PCGTW (Parallel Compare for Greater Than Word) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210309145653.743937-15-f4bug@amsat.org>
2021-07-11target/mips/tx79: Introduce PCEQ* opcodes (Parallel Compare for Equal)Philippe Mathieu-Daudé
Introduce the 'Parallel Compare for Equal' opcodes: - PCEQB (Parallel Compare for Equal Byte) - PCEQH (Parallel Compare for Equal Halfword) - PCEQW (Parallel Compare for Equal Word) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210309145653.743937-14-f4bug@amsat.org>
2021-07-11target/mips/tx79: Introduce PEXTL[BHW] opcodes (Parallel Extend Lower)Philippe Mathieu-Daudé
Introduce the 'Parallel Extend Lower' opcodes: - PEXTLB (Parallel Extend Upper from Byte) - PEXTLH (Parallel Extend Upper from Halfword) - PEXTLW (Parallel Extend Upper from Word) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210309145653.743937-13-f4bug@amsat.org>
2021-07-11target/mips/tx79: Introduce PEXTUW (Parallel Extend Upper from Word)Philippe Mathieu-Daudé
Introduce the PEXTUW opcode (Parallel Extend Upper from Word). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210309145653.743937-12-f4bug@amsat.org>
2021-07-11target/mips/tx79: Introduce PSUB* opcodes (Parallel Subtract)Philippe Mathieu-Daudé
Introduce the 'Parallel Subtract' opcodes: - PSUBB (Parallel Subtract Byte) - PSUBH (Parallel Subtract Halfword) - PSUBW (Parallel Subtract Word) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <820210309145653.743937-11-f4bug@amsat.org>
2021-07-11target/mips/tx79: Introduce PAND/POR/PXOR/PNOR opcodes (parallel logic)Philippe Mathieu-Daudé
Introduce the parallel logic opcodes: - PAND (Parallel AND) - POR (Parallel OR) - PXOR (Parallel XOR) - PNOR (Parallel NOR) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-16-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-02target/mips: Extract nanoMIPS ISA translation routinesPhilippe Mathieu-Daudé
Extract 4900 lines from the huge translate.c to a new file, 'nanomips_translate.c.inc'. As there are too many inter- dependencies we don't compile it as another object, but keep including it in the big translate.o. We gain in code maintainability. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201120210844.2625602-13-f4bug@amsat.org>
2021-07-02target/mips: Extract the microMIPS ISA translation routinesPhilippe Mathieu-Daudé
Extract 3200+ lines from the huge translate.c to a new file, 'micromips_translate.c.inc'. As there are too many inter- dependencies we don't compile it as another object, but keep including it in the big translate.o. We gain in code maintainability. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201120210844.2625602-12-f4bug@amsat.org>
2021-07-02target/mips: Extract Code Compaction ASE translation routinesPhilippe Mathieu-Daudé
Extract 1100+ lines from the huge translate.c to a new file, 'mips16e_translate.c.inc'. As there are too many inter- dependencies we don't compile it as another object, but keep including it in the big translate.o. We gain in code maintainability. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201120210844.2625602-10-f4bug@amsat.org>
2021-07-02target/mips: Add declarations for generic TCG helpersPhilippe Mathieu-Daudé
We want to extract the microMIPS ISA and Code Compaction ASE to new compilation units. We will first extract this code as included source files (.c.inc), then make them new compilation units afterward. The following methods are going to be used externally: micromips_translate.c.inc:1778: gen_ldxs(ctx, rs, rt, rd); micromips_translate.c.inc:1806: gen_align(ctx, 32, rd, rs, ... micromips_translate.c.inc:2859: gen_addiupc(ctx, reg, offset, ... mips16e_translate.c.inc:444: gen_addiupc(ctx, ry, offset, ... To avoid too much code churn, it is simpler to declare these prototypes in "translate.h" now. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174907.2904067-2-f4bug@amsat.org>
2021-06-29target/mips: Fix gen_mxu_s32ldd_s32lddrRichard Henderson
There were two bugs here: (1) the required endianness was not present in the MemOp, and (2) we were not providing a zero-extended input to the bswap as semantics required. The best fix is to fold the bswap into the memory operation, producing the desired result directly. Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-29tcg: Add flags argument to tcg_gen_bswap16_*, tcg_gen_bswap32_i64Richard Henderson
Implement the new semantics in the fallback expansion. Change all callers to supply the flags that keep the semantics unchanged locally. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-24target/mips: Merge msa32/msa64 decodetree definitionsPhilippe Mathieu-Daudé
We don't need to maintain 2 sets of decodetree definitions. Merge them into a single file. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174636.2902654-3-f4bug@amsat.org>
2021-06-24target/mips: Remove pointless gen_msa()Philippe Mathieu-Daudé
Only trans_MSA() calls gen_msa(), inline it to simplify. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174636.2902654-2-f4bug@amsat.org>
2021-06-24target/mips: Optimize regnames[] arraysPhilippe Mathieu-Daudé
Since all entries are no more than 3/4/6 bytes (including nul terminator), can save space and pie runtime relocations by declaring regnames[] as array of 3/4/6 const char. Inspired-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-10-f4bug@amsat.org>
2021-06-24target/mips: Constify host_to_mips_errno[]Philippe Mathieu-Daudé
Keep host_to_mips_errno[] in .rodata by marking the array const. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-9-f4bug@amsat.org>
2021-06-24target/mips: fix emulation of nanoMIPS BPOSGE32 instructionAleksandar Rikalo
Per the "MIPS® Architecture Extension: nanoMIPS32 DSP Technical Reference Manual — Revision 0.04" p. 88 "BPOSGE32C", offset argument (imm) should be left-shifted first. This change was tested against test_dsp_r1_bposge32.c DSP test. Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Signed-off-by: Filip Vidojevic <filip.vidojevic@syrmia.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <VI1PR0302MB34869449EE56F226FC3C21129C309@VI1PR0302MB3486.eurprd03.prod.outlook.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-06-24target/mips: Remove microMIPS BPOSGE32 / BPOSGE64 unuseful casesPhilippe Mathieu-Daudé
These switch cases for the microMIPS BPOSGE32 / BPOSGE64 opcodes have been added commit 3c824109da0 ("target-mips: microMIPS ASE support"). More than 11 years later it is safe to assume there won't be added soon. The cases fall back to the default which generates a RESERVED INSTRUCTION, so it is safe to remove them. Functionally speaking, the patch is a no-op. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-8-f4bug@amsat.org>
2021-06-24target/mips: Remove SmartMIPS / MDMX unuseful commentsPhilippe Mathieu-Daudé
These placeholder comments for SmartMIPS and MDMX extensions have been added commit 3c824109da0 ("target-mips: microMIPS ASE support"). More than 11 years later it is safe to assume there won't be added soon, so remove these unuseful comments. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-7-f4bug@amsat.org>
2021-06-24target/mips: Restrict some system specific declarations to sysemuPhilippe Mathieu-Daudé
Commit 043715d1e0f ("target/mips: Update ITU to utilize SAARI and SAAR CP0 registers") declared itc_reconfigure() in public namespace, while it is restricted to system emulation. Similarly commit 5679479b9a1 ("target/mips: Move CP0 helpers to sysemu/cp0.c") restricted cpu_mips_soft_irq() definition to system emulation, but forgot to restrict its declaration. To avoid polluting user-mode emulation with these declarations, restrict them to sysemu. Also restrict the sysemu ITU/ITC/IRQ fields from CPUMIPSState. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-6-f4bug@amsat.org>
2021-06-24target/mips: Move translate.h to tcg/ sub directoryPhilippe Mathieu-Daudé
We moved various TCG source files in commit a2b0a27d33e ("target/mips: Move TCG source files under tcg/ sub directory") but forgot to move the header declaring their prototypes. Do it now, since all it declares is TCG specific. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-5-f4bug@amsat.org>
2021-06-24target/mips: Move TCG trace events to tcg/ sub directoryPhilippe Mathieu-Daudé
Commit a2b0a27d33e ("target/mips: Move TCG source files under tcg/ sub directory") forgot to move the trace-event file. As it only contains TCG events, move it for consistency. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-4-f4bug@amsat.org>
2021-06-24target/mips: Do not abort on invalid instructionPhilippe Mathieu-Daudé
On real hardware an invalid instruction doesn't halt the world, but usually triggers a RESERVED INSTRUCTION exception. TCG guest code shouldn't abort QEMU anyway. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-2-f4bug@amsat.org>
2021-06-24target/mips: Raise exception when DINSV opcode used with DSP disabledPhilippe Mathieu-Daudé
Per the "MIPS® DSP Module for MIPS64 Architecture" manual, rev. 3.02, Table 5.3 "SPECIAL3 Encoding of Function Field for DSP Module": If the Module/ASE is not implemented, executing such an instruction must cause a Reserved Instruction Exception. The DINSV instruction lists the following exceptions: - Reserved Instruction - DSP Disabled If the MIPS core doesn't support the DSP module, or the DSP is disabled, do not handle the '$rt = $0' case as a no-op but raise the proper exception instead. Cc: Jia Liu <proljc@gmail.com> Fixes: 1cb6686cf92 ("target-mips: Add ASE DSP bit/manipulation instructions") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210529165443.1114402-1-f4bug@amsat.org>
2021-06-24target/mips: Fix more TCG temporary leaks in gen_pool32a5_nanomips_insnPhilippe Mathieu-Daudé
Fix multiple TCG temporary leaks in gen_pool32a5_nanomips_insn(). Fixes: 3285a3e4445 ("target/mips: Add emulation of DSP ASE for nanoMIPS - part 1") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-3-f4bug@amsat.org>
2021-06-24target/mips: Fix TCG temporary leaks in gen_pool32a5_nanomips_insn()Philippe Mathieu-Daudé
Fix a pair of TCG temporary leak when translating nanoMIPS SHILO opcode. Fixes: 3285a3e4445 ("target/mips: Add emulation of DSP ASE for nanoMIPS") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210530094538.1275329-1-f4bug@amsat.org>
2021-06-24target/mips: Fix potential integer overflow (CID 1452921)Philippe Mathieu-Daudé
Use the BIT_ULL() macro to ensure we use 64-bit arithmetic. This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN): CID 1452921: Integer handling issues: Potentially overflowing expression "1 << w" with type "int" (32 bits, signed) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type "uint64_t" (64 bits, unsigned). Fixes: 074cfcb4dae ("target/mips: Implement hardware page table walker") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210505215119.1517465-1-f4bug@amsat.org>
2021-06-05target/mips: Fix 'Uncoditional' typoPhilippe Mathieu-Daudé
Fix Uncoditional -> Unconditional typo. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luis Pires <luis.pires@eldorado.org.br> Message-Id: <20210602170759.2500248-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-26hw/core: Constify TCGCPUOpsRichard Henderson
We no longer have any runtime modifications to this struct, so declare them all const. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
2021-05-26target/mips: Fold jazz behaviour into mips_cpu_do_transaction_failedRichard Henderson
Add a flag to MIPSCPUClass in order to avoid needing to replace mips_tcg_ops.do_transaction_failed. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20210227232519.222663-2-richard.henderson@linaro.org>
2021-05-26cpu: Move CPUClass::get_phys_page_debug to SysemuCPUOpsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210517105140.1062037-21-f4bug@amsat.org> [rth: Drop declaration movement from target/*/cpu.h] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-26cpu: Move CPUClass::vmsd to SysemuCPUOpsPhilippe Mathieu-Daudé
Migration is specific to system emulation. - Move the CPUClass::vmsd field to SysemuCPUOps, - restrict VMSTATE_CPU() macro to sysemu, - vmstate_dummy is now unused, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210517105140.1062037-16-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-26cpu: Introduce SysemuCPUOps structurePhilippe Mathieu-Daudé
Introduce a structure to hold handler specific to sysemu. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210517105140.1062037-15-f4bug@amsat.org> [rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-26cpu: Rename CPUClass vmsd -> legacy_vmsdPhilippe Mathieu-Daudé
Quoting Peter Maydell [*]: There are two ways to handle migration for a CPU object: (1) like any other device, so it has a dc->vmsd that covers migration for the whole object. As usual for objects that are a subclass of a parent that has state, the first entry in the VMStateDescription field list is VMSTATE_CPU(), which migrates the cpu_common fields, followed by whatever the CPU's own migration fields are. (2) a backwards-compatible mechanism for CPUs that were originally migrated using manual "write fields to the migration stream structures". The on-the-wire migration format for those is based on the 'env' pointer (which isn't a QOM object), and the cpu_common part of the migration data is elsewhere. cpu_exec_realizefn() handles both possibilities: * for type 1, dc->vmsd is set and cc->vmsd is not, so cpu_exec_realizefn() does nothing, and the standard "register dc->vmsd for a device" code does everything needed * for type 2, dc->vmsd is NULL and so we register the vmstate_cpu_common directly to handle the cpu-common fields, and the cc->vmsd to handle the per-CPU stuff You can't change a CPU from one type to the other without breaking migration compatibility, which is why some guest architectures are stuck on the cc->vmsd form. New targets should use dc->vmsd. To avoid new targets to start using type (2), rename cc->vmsd as cc->legacy_vmsd. The correct field to implement is dc->vmsd (the DeviceClass one). See also commit b170fce3dd0 ("cpu: Register VMStateDescription through CPUState") for historic background. [*] https://www.mail-archive.com/qemu-devel@nongnu.org/msg800849.html Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210517105140.1062037-13-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-16target/mips: Set set_default_nan_mode with set_snan_bit_is_oneRichard Henderson
This behavior is currently hard-coded in parts_silence_nan, but setting this bit properly will allow this to be cleaned up. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-02target/mips: Move TCG source files under tcg/ sub directoryPhilippe Mathieu-Daudé
To ease maintenance, move all TCG specific files under the tcg/ sub-directory. Adapt the Meson machinery. The following prototypes: - mips_tcg_init() - mips_cpu_do_unaligned_access() - mips_cpu_do_transaction_failed() can now be restricted to the "tcg-internal.h" header. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-29-f4bug@amsat.org>
2021-05-02target/mips: Move CP0 helpers to sysemu/cp0.cPhilippe Mathieu-Daudé
Opcodes accessing Coprocessor 0 are privileged. Move the CP0 helpers to sysemu/ and simplify the #ifdef'ry. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-28-f4bug@amsat.org>
2021-05-02target/mips: Move exception management code to exception.cPhilippe Mathieu-Daudé
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-27-f4bug@amsat.org>
2021-05-02target/mips: Move TLB management helpers to tcg/sysemu/tlb_helper.cPhilippe Mathieu-Daudé
Move TLB management helpers to tcg/sysemu/tlb_helper.c. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-26-f4bug@amsat.org>
2021-05-02target/mips: Move helper_cache() to tcg/sysemu/special_helper.cPhilippe Mathieu-Daudé
Move helper_cache() to tcg/sysemu/special_helper.c. The CACHE opcode is privileged and is not accessible in user emulation. However we get a link failure when restricting the symbol to sysemu. For now, add a stub helper to satisfy linking, which abort if ever called. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-25-f4bug@amsat.org>
2021-05-02target/mips: Move Special opcodes to tcg/sysemu/special_helper.cPhilippe Mathieu-Daudé
Move the Special opcodes helpers to tcg/sysemu/special_helper.c. Since mips_io_recompile_replay_branch() is set as CPUClass::io_recompile_replay_branch handler in cpu.c, we need to declare its prototype in "tcg-internal.h". Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-24-f4bug@amsat.org>
2021-05-02target/mips: Restrict CPUMIPSTLBContext::map_address() handlers scopePhilippe Mathieu-Daudé
The 3 map_address() handlers are local to tlb_helper.c, no need to have their prototype declared publically. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-23-f4bug@amsat.org>
2021-05-02target/mips: Move tlb_helper.c to tcg/sysemu/Philippe Mathieu-Daudé
Move tlb_helper.c to the tcg/sysemu/ subdir, along with the following 3 declarations to tcg-internal.h: - cpu_mips_tlb_flush() - cpu_mips_translate_address() - r4k_invalidate_tlb() Simplify tlb_helper.c #ifdef'ry because files in tcg/sysemu/ are only build when sysemu mode is configured. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-22-f4bug@amsat.org>
2021-05-02target/mips: Restrict mmu_init() to TCGPhilippe Mathieu-Daudé
mmu_init() is only required by TCG accelerator. Restrict its declaration and call to TCG. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-21-f4bug@amsat.org>
2021-05-02target/mips: Move sysemu TCG-specific code to tcg/sysemu/ subfolderPhilippe Mathieu-Daudé
Move cp0_helper.c and mips-semi.c to the new tcg/sysemu/ folder, adapting the Meson machinery. Move the opcode definitions to tcg/sysemu_helper.h.inc. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-20-f4bug@amsat.org>
2021-05-02target/mips: Restrict cpu_mips_get_random() / update_pagemask() to TCGPhilippe Mathieu-Daudé
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-19-f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-28 06:19:07 +0000