aboutsummaryrefslogtreecommitdiff
path: root/target/mips
AgeCommit message (Collapse)Author
2018-10-29target/mips: Add bit encoding for MXU operand getting pattern 'optn3'Craig Janeczek
Add bit encoding for MXU operand getting pattern 'optn3'. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add bit encoding for MXU operand getting pattern 'optn2'Craig Janeczek
Add bit encoding for MXU operand getting pattern 'optn2'. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add bit encoding for MXU execute add/sub pattern 'eptn2'Aleksandar Markovic
Add bit encoding for MXU execute 2-bit add/subtract pattern 'eptn2'. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add bit encoding for MXU accumulate add/sub 2-bit pattern 'aptn2'Craig Janeczek
Add bit encoding for MXU accumulate add/subtract 2-bit pattern 'aptn2'. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add bit encoding for MXU accumulate add/sub 1-bit pattern 'aptn1'Aleksandar Markovic
Add bit encoding for MXU accumulate add/subtract 1-bit pattern 'aptn1'. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add MXU decoding engineAleksandar Markovic
Add MXU decoding engine: add handlers for all instruction pools, and main decode handler. The handlers, for now, for the purpose of this patch, contain only sceleton in the form of a single switch statement. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add and integrate MXU decoding engine placeholderAleksandar Markovic
Provide the placeholder and add the invocation logic for MXU decoding engine. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Amend MXU instruction opcodesAleksandar Markovic
Amend MXU instruction opcodes. Pool04 is actually only instruction OPC_MXU_S16MAD. Two cases within S16MAD are recognized by 1-bit subfield 'aptn1'. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Define a bit for MXU in insn_flagsCraig Janeczek
Define a bit for MXU in insn_flags. This is the first non-MIPS (third party) ASE supported in QEMU for MIPS, so it is placed in the section "bits 56-63: vendor-specific ASEs". Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Introduce MXU registersCraig Janeczek
Define and initialize the 16 MXU registers - 15 general computational register, and 1 control register). There is also a zero register, but it does not have any corresponding variable. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add two missing breaks for NM_LLWPE and NM_SCWPE decoder casesAleksandar Markovic
Coverity found two fallthroughs that miss break statement. Fix them. Revieved-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-25target/mips: Add disassembler support for nanoMIPSAleksandar Markovic
Add disassembler support for nanoMIPS. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Matthew Fortune <matthew.fortune@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-25target/mips: Implement emulation of nanoMIPS EVA instructionsDimitrije Nikolic
Implement emulation of nanoMIPS EVA instructions. They are all part of P.LS.E0 instruction pool, or one of its subpools. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-25target/mips: Add nanoMIPS CRC32 instruction poolAleksandar Markovic
Add nanoMIPS CRC32 instruction pool. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Fix decoding of ALIGN and DALIGN instructionsAleksandar Markovic
Opcode for ALIGN and DALIGN must be in fact ranges of opcodes, to allow paremeter 'bp' to occupy two and three bits, respectively. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Fix the title of translate.cAleksandar Markovic
Replace MIPS32 with MIPS, since the file covers all generations of MIPS architectures. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define the R5900 CPUFredrik Noring
The primary purpose of this change is to support programs compiled by GCC for the R5900 target and thereby run R5900 Linux distributions, for example Gentoo. GCC in version 7.3, by itself, by inspection of the GCC source code and inspection of the generated machine code, for the R5900 target, only emits two instructions that are specific to the R5900: the three- operand MULT and MULTU. GCC and libc also emit certain MIPS III instructions that are not part of the R5900 ISA. They are normally trapped and emulated by the Linux kernel, and therefore need to be treated accordingly by QEMU. A program compiled by GCC is taken to mean source code compiled by GCC under the restrictions above. One can, with the apparent limitations, with a bit of effort obtain a fully functioning operating system such as R5900 Gentoo. Strictly speaking, programs need not be compiled by GCC to make use of this change. Instructions and other facilities of the R5900 not implemented by this change are intended to signal provisional exceptions. One such example is the FPU that is not compliant with IEEE 754-1985 in system mode. It is therefore provisionally disabled. In user space the FPU is trapped and emulated by IEEE 754-1985 compliant software in the kernel, and this is handled accordingly by QEMU. Another example is the 93 multimedia instructions specific to the R5900 that generate provisional reserved instruction exception signals. One of the benefits of running a Linux distribution under QEMU is that programs can be compiled with a native compiler, where the host and target are the same, as opposed to a cross-compiler, where they are not the same. This is especially important in cases where the target hardware does not have the resources to run a native compiler. Problems with cross-compilation are often related to host and target differences in integer sizes, pointer sizes, endianness, machine code, ABI, etc. Sometimes cross-compilation is not even supported by the build script for a given package. One effective way to avoid those problems is to replace the cross-compiler with a native compiler. This change of compilation methods does not resolve the inherent problems with cross-compilation. The native compiler naturally replaces the cross-compiler, because one typically uses one or the other, and preferably the native compiler when the circumstances admit this. The native compiler is also a good test case for the R5900 QEMU user mode. Additionally, Gentoo is well- known for compiling and installing its packages from sources. This change has been tested with Gentoo compiled for R5900, including native compilation of several packages under QEMU. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user onlyFredrik Noring
The Linux kernel traps certain reserved instruction exceptions to emulate the corresponding instructions. QEMU plays the role of the kernel in user mode, so those traps are emulated by accepting the instructions. This change adds the function check_insn_opc_user_only to signal a reserved instruction exception for flagged CPUs in QEMU system mode. The MIPS III instructions DMULT[U], DDIV[U], LL[D] and SC[D] are not implemented in R5900 hardware. They are trapped and emulated by the Linux kernel and, accordingly, therefore QEMU user only instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IVFredrik Noring
The R5900 is taken to be MIPS III with certain modifications. From MIPS IV it implements the instructions MOVN, MOVZ and PREF. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 DIV1 and DIVU1 instructionsFredrik Noring
Add support for DIV1 and DIVU1 instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructionsFredrik Noring
Add support for MFLO1, MTLO1, MFHI1 and MTHI1 instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 three-operand MULT1 and MULTU1 instructionsFredrik Noring
Add support for MULT1 and MULTU1 instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 three-operand MULT and MULTU instructionsFredrik Noring
The three-operand MULT and MULTU are the only R5900-specific instructions emitted by GCC 7.3. The R5900 also implements the three- operand MADD and MADDU instructions, but they are omitted in QEMU for now since they are absent in programs compiled by current GCC versions. Likewise, the R5900-specific pipeline 1 instruction variants MULT1, MULTU1, DIV1, DIVU1, MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1 are omitted here as well. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI3 instruction subclassFredrik Noring
Add a placeholder for MMI3 subclass. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI2 instruction subclassFredrik Noring
Add a placeholder for MMI2 subclass. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI1 instruction subclassFredrik Noring
Add a placeholder for MM1 subclass. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI0 instruction subclassFredrik Noring
Add a placeholder for MMI0 subclass. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI instruction classFredrik Noring
Add a placeholder for MMI class. This is the main palceholder for MMI ASE. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 LQFredrik Noring
Add a placeholder for LQ instruction. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 SQ, handle user mode RDHWRFredrik Noring
Add placeholder for SQ instruction, handle RDHWR. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI3 opcode constantsFredrik Noring
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI2 opcode constantsFredrik Noring
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI1 opcode constantsFredrik Noring
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI0 opcode constantsFredrik Noring
Add definition of MI0 opcodes. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI<0|1|2|3> subclasses and opcode constantsFredrik Noring
Define MMI0, MMI1, MMI2, MMI3 subclass opcodes, and other opcodes of instructions in MMI class. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI class, and LQ and SQ opcode constantsFredrik Noring
Define MMI class, LQ, and SQ R5900 opdoces. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add R5900 Multimedia Instruction overview noteFredrik Noring
Add a comment on R5900 MMI ASE (short overview). Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 ISA, MMI ASE, and R5900 CPU preprocessor constantsFredrik Noring
The R5900 implements the 64-bit MIPS III instruction set except DMULT, DMULTU, DDIV, DDIVU, LL, SC, LLD and SCD. The MIPS IV instructions MOVN, MOVZ and PREF are implemented. It has the R5900-specific three-operand instructions MADD, MADDU, MULT and MULTU as well as pipeline 1 versions MULT1, MULTU1, DIV1, DIVU1, MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1. A set of 93 128-bit multimedia instructions specific to the R5900 is also implemented. The Toshiba TX System RISC TX79 Core Architecture manual: https://wiki.qemu.org/File:C790.pdf describes the C790 processor that is a follow-up to the R5900. There are a few notable differences in that the R5900 FPU - is not IEEE 754-1985 compliant, - does not implement double format, and - its machine code is nonstandard. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add opcodes for nanoMIPS EVA instructionsDimitrije Nikolic
Add opcodes for nanoMIPS EVA instructions: CACHEE, LBE, LBUE, LHE, LHUE, LLE, LLWPE, LWE, PREFE, SBE, SCE, SCWPE, SHE, SWE. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Fix misplaced 'break' in handling of NM_SHRA_R_PHStefan Markovic
Fix misplaced 'break' in handling of NM_SHRA_R_PH. Found by Coverity (CID 1395627). Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Fix emulation of microMIPS R6 <SELEQZ|SELNEZ>.<D|S>Matthew Fortune
Fix emulation of microMIPS R6 <SELEQZ|SELNEZ>.<D|S> instructions. Their handling was permuted. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Matthew Fortune <matthew.fortune@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Implement hardware page table walker for MIPS32Yongbok Kim
Implement hardware page table walker. This implementation is limiter only to MIPS32. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add reset state for PWSize and PWField registersYongbok Kim
Add reset state for PWSize and PWField registers. The reset state is different for pre-R6 and R6 (and post-R6) ISAa. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWCtl registerYongbok Kim
Add PWCtl register (CP0 Register 5, Select 6). The PWCtl register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: PWEn (31) - Hardware Page Table walker enable PWDirExt (30) - If 1, 4-th level implemented (MIPS64 only) XK (28) - If 1, walker handles xkseg (MIPS64 only) XS (27) - If 1, walker handles xsseg (MIPS64 only) XU (26) - If 1, walker handles xuseg (MIPS64 only) DPH (7) - Dual Page format of Huge Page support HugePg (6) - Huge Page PTE supported in Directory levels PSn (5..0) - Bit position of PTEvld in Huge Page PTE Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWSize registerYongbok Kim
Add PWSize register (CP0 Register 5, Select 7). The PWSize register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: BDW (37..32) Base Directory index width (MIPS64 only) GDW (29..24) Global Directory index width UDW (23..18) Upper Directory index width MDW (17..12) Middle Directory index width PTW (11..6 ) Page Table index width PTEW ( 5..0 ) Left shift applied to the Page Table index Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWField registerYongbok Kim
Add PWField register (CP0 Register 5, Select 6). The PWField register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: MIPS64: BDI (37..32) - Base Directory index GDI (29..24) - Global Directory index UDI (23..18) - Upper Directory index MDI (17..12) - Middle Directory index PTI (11..6 ) - Page Table index PTEI ( 5..0 ) - Page Table Entry shift MIPS32: GDW (29..24) - Global Directory index UDW (23..18) - Upper Directory index MDW (17..12) - Middle Directory index PTW (11..6 ) - Page Table index PTEW ( 5..0 ) - Page Table Entry shift Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWBase registerYongbok Kim
Add PWBase register (CP0 Register 5, Select 5). The PWBase register contains the Page Table Base virtual address. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 Config2 to DisasContextStefan Markovic
Add field corresponding to CP0 Config2 to DisasContext. This is needed for availability control via Config2 bits. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Improve DSP R2/R3-related namingStefan Markovic
Do following replacements: ASE_DSPR2 -> ASE_DSP_R2 ASE_DSPR3 -> ASE_DSP_R3 MIPS_HFLAG_DSPR2 -> MIPS_HFLAG_DSP_R2 MIPS_HFLAG_DSPR3 -> MIPS_HFLAG_DSP_R3 check_dspr2() -> check_dsp_r2() check_dspr3() -> check_dsp_r3() and several other similar minor replacements. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add availability control for DSP R3 ASEStefan Markovic
Add infrastructure for availability control for DSP R3 ASE MIPS instructions. Only BPOSGE32C currently belongs to DSP R3 ASE, but this is likely to be changed in near future. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>