aboutsummaryrefslogtreecommitdiff
path: root/target/mips/tcg/translate.c
AgeCommit message (Collapse)Author
2022-11-08target/mips: Don't check COP1X for 64 bit FP modeJiaxun Yang
Some implementations (i.e. Loongson-2F) may decide to implement a 64 bit FPU without implementing COP1X instructions. As the eligibility of 64 bit FP instructions is already determined by CP0St_FR, there is no need to check for COP1X again. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221102165719.190378-1-jiaxun.yang@flygoat.com> [PMD: Add missing trailing parenthesis (buildfix)] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-11-08target/mips: Enable LBX/LWX/* instructions for OcteonPavel Dovgalyuk
This patch changes condition and function name for enabling indexed load instructions for Octeon vCPUs. Octeons do not have DSP extension, but implement LBX-and-others. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <166728058455.229236.13834649461181619195.stgit@pasha-ThinkPad-X280> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-26target/mips: Convert to tcg_ops restore_state_to_opcRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-09-13target/mips: Honour -semihosting-config userspace=onPeter Maydell
Honour the commandline -semihosting-config userspace=on option, instead of always permitting userspace semihosting calls in system emulation mode, by passing the correct value to the is_userspace argument of semihosting_enabled(). Note that this is a behaviour change: if the user wants to do semihosting calls from userspace they must now specifically enable them on the command line. MIPS semihosting is not implemented for linux-user builds. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220822141230.3658237-5-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-09-06accel/tcg: Add pc and host_pc params to gen_intermediate_codeRichard Henderson
Pass these along to translator_loop -- pc may be used instead of tb->pc, and host_pc is currently unused. Adjust all targets at one time. Acked-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-08-02target/mips: Advance pc after semihosting exceptionRichard Henderson
Delay generating the exception until after we know the insn length, and record that length in env->error_code. Fixes: 8ec7e3c53d4 ("target/mips: Use an exception for semihosting") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1126 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-12target/mips: introduce decodetree structure for Cavium Octeon extensionPavel Dovgalyuk
This patch adds decodetree for Cavium Octeon extension and an instruction set extension flag for using it in CPU models. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <165572672162.167724.13656301229517693806.stgit@pasha-ThinkPad-X280> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-28target/mips: Use an exception for semihostingRichard Henderson
Within do_interrupt, we hold the iothread lock, which is required for Chardev access for the console, and for the round trip for use_gdb_syscalls(). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-11target/mips: Fix handling of unaligned memory access for nanoMIPS ISADragan Mladjenovic
nanoMIPS ISA does not support unaligned memory access. Adjust DisasContext's default_tcg_memop_mask to reflect this. Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com> Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220504110403.613168-6-stefan.pejic@syrmia.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-04-20exec/translator: Pass the locked filepointer to disas_log hookRichard Henderson
We have fetched and locked the logfile in translator_loop. Pass the filepointer down to the disas_log hook so that it need not be fetched and locked again. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
2022-01-11target/mips: Extract trap code into env->error_codeRichard Henderson
Simplify cpu_loop by doing all of the decode in translate. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11target/mips: Extract break code into env->error_codeRichard Henderson
Simplify cpu_loop by doing all of the decode in translate. This fixes a bug in that cpu_loop was not handling the different layout of the R6 version of break16. This fixes a bug in that cpu_loop extracted the wrong bits for the mips16e break16 instruction. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-08exec/memop: Adding signedness to quad definitionsFrédéric Pétrot
Renaming defines for quad in their various forms so that their signedness is now explicit. Done using git grep as suggested by Philippe, with a bit of hand edition to keep assignments aligned. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-18target/mips: Remove unused TCG temporary in gen_mipsdsp_accinsn()Philippe Mathieu-Daudé
Since gen_mipsdsp_accinsn() got added in commit b53371ed5d4 ("target-mips: Add ASE DSP accumulator instructions"), the 'v2_t' TCG temporary has never been used. Remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211014224551.2204949-1-f4bug@amsat.org>
2021-10-18target/mips: Fix DEXTRV_S.H DSP opcodePhilippe Mathieu-Daudé
While for the DEXTR_S.H opcode: "The shift argument is provided in the instruction." For the DEXTRV_S.H opcode we have: "The five least-significant bits of register rs provide the shift argument, interpreted as a five-bit unsigned integer; the remaining bits in rs are ignored." While 't1' contains the 'rs' register content (the shift value for DEXTR_S.H), we need to load the value of 'rs' for DEXTRV_S.H. We can directly use the v1_t TCG register which already contains this shift value. Fixes: b53371ed5d4 ("target-mips: Add ASE DSP accumulator instructions") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211013215652.1764551-1-f4bug@amsat.org>
2021-10-18target/mips: Use tcg_constant_tl() in gen_compute_compact_branch()Philippe Mathieu-Daudé
The offset is constant and read-only: move it to the constant pool. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211003175743.3738710-9-f4bug@amsat.org>
2021-10-15target/mips: Drop exit checks for singlestep_enabledRichard Henderson
GDB single-stepping is now handled generically. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-15target/mips: Fix single steppingRichard Henderson
As per an ancient comment in mips_tr_translate_insn about the expectations of gdb, when restarting the insn in a delay slot we also re-execute the branch. Which means that we are expected to execute two insns in this case. This has been broken since 8b86d6d2580, where we forced max_insns to 1 while single-stepping. This resulted in an exit from the translator loop after the branch but before the delay slot is translated. Increase the max_insns to 2 for this case. In addition, bypass the end-of-page check, for when the branch itself ends the page. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-14accel/tcg: Add DisasContextBase argument to translator_ld*Ilya Leoshkevich
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> [rth: Split out of a larger patch.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-08-25target/mips: Replace TARGET_WORDS_BIGENDIAN by cpu_is_bigendian()Philippe Mathieu-Daudé
Add the inlined cpu_is_bigendian() function in "translate.h". Replace the TARGET_WORDS_BIGENDIAN #ifdef'ry by calls to cpu_is_bigendian(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210818164321.2474534-6-f4bug@amsat.org>
2021-08-25target/mips: Store CP0_Config0 in DisasContextPhilippe Mathieu-Daudé
Most TCG helpers only have access to a DisasContext pointer, not CPUMIPSState. Store a copy of CPUMIPSState::CP0_Config0 in DisasContext so we can access it from TCG helpers. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210818164321.2474534-5-f4bug@amsat.org>
2021-08-25target/mips: Define gen_helper() macros in translate.hPhilippe Mathieu-Daudé
To be able to split some code calling the gen_helper() macros out of the huge translate.c, we need to define them in the 'translate.h' local header. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210816205107.2051495-9-f4bug@amsat.org>
2021-08-25target/mips: Use tcg_constant_i32() in generate_exception_err()Philippe Mathieu-Daudé
excp/err are temporaries input, so we can replace tcg_const_i32() calls by tcg_constant_i32() equivalent. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210816205107.2051495-8-f4bug@amsat.org>
2021-08-25target/mips: Inline gen_helper_0e0i()Philippe Mathieu-Daudé
gen_helper_0e0i() is one-line long and is only used twice: simply inline it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210816205107.2051495-7-f4bug@amsat.org>
2021-08-25target/mips: Inline gen_helper_1e1i() call in op_ld_INSN() macrosPhilippe Mathieu-Daudé
gen_helper_1e1i() is one-line long and is used in one place: simply inline it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210816205107.2051495-6-f4bug@amsat.org>
2021-08-25target/mips: Simplify gen_helper() macros by using tcg_constant_i32()Philippe Mathieu-Daudé
In all call sites the last argument is always used as a read-only value, so we can replace tcg_const_i32() temporary by tcg_constant_i32(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210816205107.2051495-5-f4bug@amsat.org>
2021-08-25target/mips: Use tcg_constant_i32() in gen_helper_0e2i()Philippe Mathieu-Daudé
$rt register is used read-only, so we can replace tcg_const_i32() temporary by tcg_constant_i32(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210816205107.2051495-4-f4bug@amsat.org>
2021-08-25target/mips: Remove gen_helper_1e2i()Philippe Mathieu-Daudé
gen_helper_1e2i() is unused since commit 33a07fa2db6 ("target/mips: reimplement SC instruction emulation and use cmpxchg"), remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210816205107.2051495-3-f4bug@amsat.org>
2021-08-25target/mips: Remove gen_helper_0e3i()Philippe Mathieu-Daudé
gen_helper_0e3i() is unused since commit 895c2d04359 ("target-mips: switch to AREG0 free mode"), remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210816205107.2051495-2-f4bug@amsat.org>
2021-08-25target/mips: Remove duplicated check_cp1_enabled() calls in Loongson EXTPhilippe Mathieu-Daudé
We already call check_cp1_enabled() earlier in the "pre-conditions" checks for GSLWXC1 and GSLDXC1 in gen_loongson_lsdc2() prologue. Remove the duplicated calls. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Message-Id: <20210816001031.1720432-1-f4bug@amsat.org>
2021-08-25target/mips: Convert Vr54xx MSA* opcodes to decodetreePhilippe Mathieu-Daudé
Convert the following Integer Multiply-Accumulate opcodes: * MSAC Multiply, negate, accumulate, and move LO * MSACHI Multiply, negate, accumulate, and move HI * MSACHIU Unsigned multiply, negate, accumulate, and move HI * MSACU Unsigned multiply, negate, accumulate, and move LO Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210808173018.90960-8-f4bug@amsat.org>
2021-08-25target/mips: Convert Vr54xx MUL* opcodes to decodetreePhilippe Mathieu-Daudé
Convert the following Integer Multiply-Accumulate opcodes: * MULHI Multiply and move HI * MULHIU Unsigned multiply and move HI * MULS Multiply, negate, and move LO * MULSHI Multiply, negate, and move HI * MULSHIU Unsigned multiply, negate, and move HI * MULSU Unsigned multiply, negate, and move LO Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210808173018.90960-7-f4bug@amsat.org>
2021-08-25target/mips: Convert Vr54xx MACC* opcodes to decodetreePhilippe Mathieu-Daudé
Convert the following Integer Multiply-Accumulate opcodes: * MACC Multiply, accumulate, and move LO * MACCHI Multiply, accumulate, and move HI * MACCHIU Unsigned multiply, accumulate, and move HI * MACCU Unsigned multiply, accumulate, and move LO Since all opcodes are generated using the same pattern, we add the gen_helper_mult_acc_t typedef and MULT_ACC() macro to remove boilerplate code. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210808173018.90960-6-f4bug@amsat.org>
2021-08-25target/mips: Introduce decodetree structure for NEC Vr54xx extensionPhilippe Mathieu-Daudé
The decoder is called but doesn't decode anything. This will ease reviewing the next commit. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210801235926.3178085-3-f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-08-25target/mips: Decode vendor extensions before MIPS ISAsPhilippe Mathieu-Daudé
In commit ffc672aa977 ("target/mips/tx79: Move MFHI1 / MFLO1 opcodes to decodetree") we misplaced the decoder call. Move it to the correct place. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210801234202.3167676-3-f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-08-25target/mips: Simplify PREF opcodePhilippe Mathieu-Daudé
check_insn() checks for any bit in the set, and INSN_R5900 is just another bit added to the set. No need to special-case it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210801234202.3167676-2-f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-08-25target/mips: Remove JR opcode unused argumentsPhilippe Mathieu-Daudé
JR opcode (Jump Register) only takes 1 argument, $rs. JALR (Jump And Link Register) takes 3: $rs, $rd and $hint. Commit 6af0bf9c7c3 added their processing into decode_opc() as: case 0x08 ... 0x09: /* Jumps */ gen_compute_branch(ctx, op1 | EXT_SPECIAL, rs, rd, sa); having both opcodes handled in the same function: gen_compute_branch. Per JR encoding, both $rd and $hint ('sa') are decoded as zero. Later this code got extracted to decode_opc_special(), commit 7a387fffce5 used definitions instead of magic values: case OPC_JR ... OPC_JALR: gen_compute_branch(ctx, op1, rs, rd, sa); Finally commit 0aefa33318b moved OPC_JR out of decode_opc_special, to a new 'decode_opc_special_legacy' function: @@ -15851,6 +15851,9 @@ static void decode_opc_special_legacy(CPUMIPSState *env, DisasContext *ctx) + case OPC_JR: + gen_compute_branch(ctx, op1, 4, rs, rd, sa); + break; @@ -15933,7 +15936,7 @@ static void decode_opc_special(CPUMIPSState *env, DisasContext *ctx) - case OPC_JR ... OPC_JALR: + case OPC_JALR: gen_compute_branch(ctx, op1, 4, rs, rd, sa); break; Since JR is now handled individually, it is pointless to decode and pass it unused arguments. Replace them by simple zero value to avoid confusion with this opcode. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210730225507.2642827-1-f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Remove TranslatorOps.breakpoint_checkRichard Henderson
The hook is now unused, with breakpoints checked outside translation. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-12Merge remote-tracking branch 'remotes/philmd/tags/mips-20210711' into stagingPeter Maydell
MIPS patches queue - Rename Raven ASIC PCI bridge, add PCI_IO_BASE_ADDR definition - Various Toshiba TX79 opcodes implemented - Rewrite UHI errno_mips() using switch statement - Few fixes and improvements in the SONIC model (dp8393x) # gpg: Signature made Sun 11 Jul 2021 22:12:49 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/mips-20210711: dp8393x: don't force 32-bit register access dp8393x: Rewrite dp8393x_get() / dp8393x_put() dp8393x: Store CAM registers as 16-bit dp8393x: Replace 0x40 magic value by SONIC_REG_COUNT definition dp8393x: Replace address_space_rw(is_write=1) by address_space_write() dp8393x: fix CAM descriptor entry index target/mips: Rewrite UHI errno_mips() using switch statement target/mips/tx79: Introduce SQ opcode (Store Quadword) target/mips/tx79: Introduce LQ opcode (Load Quadword) target/mips/tx79: Introduce PROT3W opcode (Parallel Rotate 3 Words) target/mips/tx79: Introduce PPACW opcode (Parallel Pack to Word) target/mips/tx79: Introduce PCGT* (Parallel Compare for Greater Than) target/mips/tx79: Introduce PCEQ* opcodes (Parallel Compare for Equal) target/mips/tx79: Introduce PEXTL[BHW] opcodes (Parallel Extend Lower) target/mips/tx79: Introduce PEXTUW (Parallel Extend Upper from Word) target/mips/tx79: Introduce PSUB* opcodes (Parallel Subtract) target/mips/tx79: Introduce PAND/POR/PXOR/PNOR opcodes (parallel logic) hw/pci-host/raven: Add PCI_IO_BASE_ADDR definition hw/pci-host: Rename Raven ASIC PCI bridge as raven.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-11target/mips/tx79: Introduce LQ opcode (Load Quadword)Philippe Mathieu-Daudé
Introduce the LQ opcode (Load Quadword) and remove unreachable code. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-26-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-09target/mips: Fix missing else in gen_goto_tbRichard Henderson
Do not emit dead code for the singlestep_enabled case, after having exited the TB with a debug exception. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09target/mips: Use translator_use_goto_tbRichard Henderson
Just use translator_use_goto_tb directly at the one call site, rather than maintaining a local wrapper. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09tcg: Avoid including 'trace-tcg.h' in target translate.cPhilippe Mathieu-Daudé
The root trace-events only declares a single TCG event: $ git grep -w tcg trace-events trace-events:115:# tcg/tcg-op.c trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d" and only a tcg/tcg-op.c uses it: $ git grep -l trace_guest_mem_before_tcg tcg/tcg-op.c therefore it is pointless to include "trace-tcg.h" in each target (because it is not used). Remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210629050935.2570721-1-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-02target/mips: Extract nanoMIPS ISA translation routinesPhilippe Mathieu-Daudé
Extract 4900 lines from the huge translate.c to a new file, 'nanomips_translate.c.inc'. As there are too many inter- dependencies we don't compile it as another object, but keep including it in the big translate.o. We gain in code maintainability. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201120210844.2625602-13-f4bug@amsat.org>
2021-07-02target/mips: Extract the microMIPS ISA translation routinesPhilippe Mathieu-Daudé
Extract 3200+ lines from the huge translate.c to a new file, 'micromips_translate.c.inc'. As there are too many inter- dependencies we don't compile it as another object, but keep including it in the big translate.o. We gain in code maintainability. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201120210844.2625602-12-f4bug@amsat.org>
2021-07-02target/mips: Extract Code Compaction ASE translation routinesPhilippe Mathieu-Daudé
Extract 1100+ lines from the huge translate.c to a new file, 'mips16e_translate.c.inc'. As there are too many inter- dependencies we don't compile it as another object, but keep including it in the big translate.o. We gain in code maintainability. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201120210844.2625602-10-f4bug@amsat.org>
2021-07-02target/mips: Add declarations for generic TCG helpersPhilippe Mathieu-Daudé
We want to extract the microMIPS ISA and Code Compaction ASE to new compilation units. We will first extract this code as included source files (.c.inc), then make them new compilation units afterward. The following methods are going to be used externally: micromips_translate.c.inc:1778: gen_ldxs(ctx, rs, rt, rd); micromips_translate.c.inc:1806: gen_align(ctx, 32, rd, rs, ... micromips_translate.c.inc:2859: gen_addiupc(ctx, reg, offset, ... mips16e_translate.c.inc:444: gen_addiupc(ctx, ry, offset, ... To avoid too much code churn, it is simpler to declare these prototypes in "translate.h" now. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174907.2904067-2-f4bug@amsat.org>
2021-06-24target/mips: Optimize regnames[] arraysPhilippe Mathieu-Daudé
Since all entries are no more than 3/4/6 bytes (including nul terminator), can save space and pie runtime relocations by declaring regnames[] as array of 3/4/6 const char. Inspired-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-10-f4bug@amsat.org>
2021-06-24target/mips: fix emulation of nanoMIPS BPOSGE32 instructionAleksandar Rikalo
Per the "MIPS® Architecture Extension: nanoMIPS32 DSP Technical Reference Manual — Revision 0.04" p. 88 "BPOSGE32C", offset argument (imm) should be left-shifted first. This change was tested against test_dsp_r1_bposge32.c DSP test. Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Signed-off-by: Filip Vidojevic <filip.vidojevic@syrmia.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <VI1PR0302MB34869449EE56F226FC3C21129C309@VI1PR0302MB3486.eurprd03.prod.outlook.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-06-24target/mips: Remove microMIPS BPOSGE32 / BPOSGE64 unuseful casesPhilippe Mathieu-Daudé
These switch cases for the microMIPS BPOSGE32 / BPOSGE64 opcodes have been added commit 3c824109da0 ("target-mips: microMIPS ASE support"). More than 11 years later it is safe to assume there won't be added soon. The cases fall back to the default which generates a RESERVED INSTRUCTION, so it is safe to remove them. Functionally speaking, the patch is a no-op. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-8-f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-18 05:11:18 +0000