aboutsummaryrefslogtreecommitdiff
path: root/target/mips/tcg/sysemu
AgeCommit message (Collapse)Author
2024-08-20target/mips: Load PTE as DATAPhilippe Mathieu-Daudé
PTE is not CODE so load it as normal DATA access. Fixes: 074cfcb4da ("Implement hardware page table walker for MIPS32") Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240814090452.2591-4-philmd@linaro.org>
2024-08-20target/mips: Use correct MMU index in get_pte()Philippe Mathieu-Daudé
When refactoring page_table_walk_refill() in commit 4e999bf419 we missed the indirect call to cpu_mmu_index() in get_pte(): page_table_walk_refill() -> get_pte() -> cpu_ld[lq]_code() -> cpu_mmu_index() Since we don't mask anymore the modes in hflags, cpu_mmu_index() can return UM or SM, while we only expect KM or ERL. Fix by propagating ptw_mmu_idx to get_pte(), and use the cpu_ld/st_code_mmu() API with the correct MemOpIdx. Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reported-by: Waldemar Brodkorb <wbx@uclibc-ng.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2470 Fixes: 4e999bf419 ("target/mips: Pass ptw_mmu_idx down from mips_cpu_tlb_fill") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240814090452.2591-3-philmd@linaro.org>
2024-08-20target/mips: Pass page table entry size as MemOp to get_pte()Philippe Mathieu-Daudé
In order to simplify the next commit, pass the PTE size as MemOp. Rename: native_shift -> native_op directory_shift -> directory_mop leaf_shift -> leaf_mop Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240814090452.2591-2-philmd@linaro.org>
2024-07-22target/mips: Add semihosting stubPhilippe Mathieu-Daudé
Since the SEMIHOSTING feature is optional, we need a stub to link when it is disabled. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240717105723.58965-4-philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240718094523.1198645-11-alex.bennee@linaro.org>
2024-06-04target/mips: Remove unused 'hw/misc/mips_itu.h' headerPhilippe Mathieu-Daudé
Since commit e1152f8166 ("target/mips: Remove helpers accessing SAAR registers") this header is not needed. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20240529155216.5574-1-philmd@linaro.org>
2024-05-06accel/tcg: Access tcg_cflags with getter / setterPhilippe Mathieu-Daudé
Access the CPUState::tcg_cflags via tcg_cflags_has() and tcg_cflags_set() helpers. Mechanical change using the following Coccinelle spatch script: @@ expression cpu; expression flags; @@ - cpu->tcg_cflags & flags + tcg_cflags_has(cpu, flags) @@ expression cpu; expression flags; @@ - (tcg_cflags_has(cpu, flags)) + tcg_cflags_has(cpu, flags) @@ expression cpu; expression flags; @@ - cpu->tcg_cflags |= flags; + tcg_cflags_set(cpu, flags); Then manually moving the declarations, and adding both tcg_cflags_has() and tcg_cflags_set() definitions. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240427155714.53669-15-philmd@linaro.org>
2024-05-06exec/cpu: Extract page-protection definitions to page-protection.hPhilippe Mathieu-Daudé
Extract page-protection definitions from "exec/cpu-all.h" to "exec/page-protection.h". The list of files requiring the new header was generated using: $ git grep -wE \ 'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)' Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240427155714.53669-3-philmd@linaro.org>
2024-03-12target/mips: Prefer fast cpu_env() over slower CPU QOM cast macroPhilippe Mathieu-Daudé
Mechanical patch produced running the command documented in scripts/coccinelle/cpu_env.cocci_template header. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240129164514.73104-19-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-02-15target/mips: Remove helpers accessing SAARI registerPhilippe Mathieu-Daudé
DisasContext::saar boolean is never set, so this code is not reachable. Remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240209090513.9401-9-philmd@linaro.org>
2024-02-15target/mips: Remove helpers accessing SAAR registersPhilippe Mathieu-Daudé
DisasContext::saar boolean is never set, so this code is not reachable. Remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240209090513.9401-2-philmd@linaro.org>
2024-02-03target/mips: Split out mips_env_mmu_indexRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-02-03target/mips: Pass ptw_mmu_idx down from mips_cpu_tlb_fillRichard Henderson
Rather than adjust env->hflags so that the value computed by cpu_mmu_index() changes, compute the mmu_idx that we want directly and pass it down. Introduce symbolic constants for MMU_{KERNEL,ERL}_IDX. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-01-08system/cpus: rename qemu_mutex_lock_iothread() to bql_lock()Stefan Hajnoczi
The Big QEMU Lock (BQL) has many names and they are confusing. The actual QemuMutex variable is called qemu_global_mutex but it's commonly referred to as the BQL in discussions and some code comments. The locking APIs, however, are called qemu_mutex_lock_iothread() and qemu_mutex_unlock_iothread(). The "iothread" name is historic and comes from when the main thread was split into into KVM vcpu threads and the "iothread" (now called the main loop thread). I have contributed to the confusion myself by introducing a separate --object iothread, a separate concept unrelated to the BQL. The "iothread" name is no longer appropriate for the BQL. Rename the locking APIs to: - void bql_lock(void) - void bql_unlock(void) - bool bql_locked(void) There are more APIs with "iothread" in their names. Subsequent patches will rename them. There are also comments and documentation that will be updated in later patches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: Fabiano Rosas <farosas@suse.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Acked-by: Hyman Huang <yong.huang@smartx.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-19hw/misc/mips_itu: Declare itc_reconfigure() in 'hw/misc/mips_itu.h'Philippe Mathieu-Daudé
We already provide "hw/misc/mips_itu.h" to declare prototype related to MIPSITUState. Move itc_reconfigure() declaration there. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231009171443.12145-3-philmd@linaro.org>
2023-10-19hw/mips: Merge 'hw/mips/cpudevs.h' with 'target/mips/cpu.h'Philippe Mathieu-Daudé
"hw/mips/cpudevs.h" contains declarations which are specific to the MIPS architecture; it doesn't make sense for these to be called from a non-MIPS architecture. Move the declarations to "target/mips/cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231009171443.12145-2-philmd@linaro.org>
2023-10-07semihosting: Rename softmmu_FOO_user() -> uaccess_FOO_user()Philippe Mathieu-Daudé
Add a check in 'softmmu-uaccess.h' that the header is only include in system emulation, and rename it as 'uaccess.h'. Rename the API methods: - softmmu_[un]lock_user*() -> uaccess_[un]lock_user*() - softmmu_strlen_user() -> uaccess_strlen_user(). Update a pair of comments. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20231004090629.37473-9-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-10-04accel/tcg: Replace CPUState.env_ptr with cpu_env()Richard Henderson
Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-08-31target/mips: Remove unused headers in lcsr_helper.cPhilippe Mathieu-Daudé
This files only access the address_space_ld/st API, declared in "exec/cpu-all.h", already included by "cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230828221314.18435-9-philmd@linaro.org>
2023-08-31target/helpers: Remove unnecessary 'qemu/main-loop.h' headerPhilippe Mathieu-Daudé
"qemu/main-loop.h" declares functions related to QEMU's main loop mutex, which these files don't access. Remove the unused "qemu/main-loop.h" header. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230828221314.18435-8-philmd@linaro.org>
2023-08-31target/helpers: Remove unnecessary 'exec/cpu_ldst.h' headerPhilippe Mathieu-Daudé
These files don't use the CPU ld/st API, remove the unnecessary "exec/cpu_ldst.h" header. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230828221314.18435-7-philmd@linaro.org>
2023-07-25target/mips: Avoid shift by negative number in page_table_walk_refill()Peter Maydell
Coverity points out that in page_table_walk_refill() we can shift by a negative number, which is undefined behaviour (CID 1452918, 1452920, 1452922). We already catch the negative directory_shift and leaf_shift as being a "bail out early" case, but not until we've already used them to calculated some offset values. The shifts can be negative only if ptew > 1, so make the bail-out-early check look directly at that, and only calculate the shift amounts and the offsets based on them after we have done that check. This allows us to simplify the expressions used to calculate the shift amounts, use an unsigned type, and avoids the undefined behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMD: Check for ptew > 1, use unsigned type] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20230717213504.24777-3-philmd@linaro.org>
2023-07-25target/mips: Pass directory/leaf shift values to walk_directory()Philippe Mathieu-Daudé
We already evaluated directory_shift and leaf_shift in page_table_walk_refill(), no need to do that again: pass as argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20230717213504.24777-2-philmd@linaro.org>
2023-07-10target/mips: Implement Loongson CSR instructionsJiaxun Yang
Loongson introduced CSR instructions since 3A4000, which looks similar to IOCSR and CPUCFG instructions we seen in LoongArch. Unfortunately we don't have much document about those instructions, bit fields of CPUCFG instructions and IOCSR registers can be found at 3A4000's user manual, while instruction encodings can be found at arch/mips/include/asm/mach-loongson64/loongson_regs.h from Linux Kernel. Our predefined CPUCFG bits are differ from actual 3A4000, since we can't emulate all CPUCFG features present in 3A4000 for now, we just enable bits for what we have in TCG. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20230521214832.20145-2-jiaxun.yang@flygoat.com> [JY: Fixed typo in ase_lcsr_available(), retrict GEN_FALSE_TRANS] [PMD: Fix meson's mips_softmmu_ss -> mips_system_ss, restrict AddressSpace/MemoryRegion to SysEmu] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-07gdbstub: move syscall handling to new fileAlex Bennée
Our GDB syscall support is the last chunk of code that needs target specific support so move it to a new file. We take the opportunity to move the syscall state into its own singleton instance and add in a few helpers for the main gdbstub to interact with the module. I also moved the gdb_exit() declaration into syscalls.h as it feels pretty related and most of the callers of it treat it as such. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230302190846.2593720-22-alex.bennee@linaro.org> Message-Id: <20230303025805.625589-22-richard.henderson@linaro.org>
2023-03-07gdbstub: move register helpers into standalone includeAlex Bennée
These inline helpers are all used by target specific code so move them out of the general header so we don't needlessly pollute the rest of the API with target specific stuff. Note we have to include cpu.h in semihosting as it was relying on a side effect before. Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org> Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>
2023-03-01target/mips: Replace `tb_pc()` with `tb->pc`Anton Johansson
Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230227135202.9710-20-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-18bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plxPhilippe Mathieu-Daudé
The 'hwaddr' type is defined in "exec/hwaddr.h" as: hwaddr is the type of a physical address (its size can be different from 'target_ulong'). All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx: $ fgrep define include/exec/hwaddr.h #define HWADDR_H #define HWADDR_BITS 64 #define HWADDR_MAX UINT64_MAX #define TARGET_FMT_plx "%016" PRIx64 ^^^^^^ #define HWADDR_PRId PRId64 #define HWADDR_PRIi PRIi64 #define HWADDR_PRIo PRIo64 #define HWADDR_PRIu PRIu64 #define HWADDR_PRIx PRIx64 #define HWADDR_PRIX PRIX64 Since hwaddr's size can be *different* from target_ulong, it is very confusing to read one of its format using the 'TARGET_FMT_' prefix, normally used for the target_long / target_ulong types: $ fgrep TARGET_FMT_ include/exec/cpu-defs.h #define TARGET_FMT_lx "%08x" #define TARGET_FMT_ld "%d" #define TARGET_FMT_lu "%u" #define TARGET_FMT_lx "%016" PRIx64 #define TARGET_FMT_ld "%" PRId64 #define TARGET_FMT_lu "%" PRIu64 Apparently this format was missed during commit a8170e5e97 ("Rename target_phys_addr_t to hwaddr"), so complete it by doing a bulk-rename with: $ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110212947.34557-1-philmd@linaro.org> [thuth: Fix some warnings from checkpatch.pl along the way] Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-04accel/tcg: Introduce tb_pc and log_pcRichard Henderson
The availability of tb->pc will shortly be conditional. Introduce accessor functions to minimize ifdefs. Pass around a known pc to places like tcg_gen_code, where the caller must already have the value. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-08-08target/mips: Handle lock_user() failure in UHI_plog semihosting callPeter Maydell
Coverity notes that we forgot to check the error return from lock_user() in one place in the handling of the UHI_plog semihosting call. Add the missing error handling. report_fault() is rather brutal in that it will call abort(), but this is the same error-handling used in the rest of this file. Resolves: Coverity CID 1490684 Fixes: ea4210600db3c5 ("target/mips: Avoid qemu_semihosting_log_out for UHI_plog") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220719191737.384744-1-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-08-02target/mips: Advance pc after semihosting exceptionRichard Henderson
Delay generating the exception until after we know the insn length, and record that length in env->error_code. Fixes: 8ec7e3c53d4 ("target/mips: Use an exception for semihosting") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1126 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-12target/mips: Remove GET_TARGET_STRING and FREE_TARGET_STRINGRichard Henderson
Inline these macros into the only two callers. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220628111701.677216-9-richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-07-12target/mips: Simplify UHI_argnlen and UHI_argnRichard Henderson
With semihosting_get_arg, we already have a check vs argc, so there's no point replicating it -- just check the result vs NULL. Merge copy_argn_to_target into its caller. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220628111701.677216-8-richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-07-12target/mips: Use error_report for UHI_assertRichard Henderson
Always log the assert locally. Do not report_fault, but instead include the fact of the fault in the assertion. Don't bother freeing allocated strings before the abort(). Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220628111701.677216-6-richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-07-12target/mips: Avoid qemu_semihosting_log_out for UHI_plogRichard Henderson
Use semihost_sys_write and/or qemu_semihosting_console_write for implementing plog. When using gdbstub, copy the temp string below the stack so that gdb has a guest address from which to perform the log. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220628111701.677216-5-richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-07-12target/mips: Use semihosting/syscalls.hRichard Henderson
This separates guest file descriptors from host file descriptors, and utilizes shared infrastructure for integration with gdbstub. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220628111701.677216-4-richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-07-12target/mips: Drop link syscall from semihostingRichard Henderson
We don't implement it with _WIN32 hosts, and the syscall is missing from the gdb remote file i/o interface. Since we can't implement it universally, drop it. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220628111701.677216-3-richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-07-12target/mips: Create report_fault for semihostingRichard Henderson
The UHI specification does not have an EFAULT value, and further specifies that "undefined UHI operations should not return control to the target". So, log the error and abort. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220628111701.677216-2-richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-28target/mips: Drop pread and pwrite syscalls from semihostingRichard Henderson
We don't implement it with _WIN32 hosts, and the syscalls are missing from the gdb remote file i/o interface. Since we can't implement them universally, drop them. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-28target/mips: Add UHI errno valuesRichard Henderson
From the Unified Hosting Interface, MD01069 Reference Manual, version 1.1.6, 06 July 2015. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-28target/mips: Use an exception for semihostingRichard Henderson
Within do_interrupt, we hold the iothread lock, which is required for Chardev access for the console, and for the round trip for use_gdb_syscalls(). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-28semihosting: Move exec/softmmu-semi.h to semihosting/softmmu-uaccess.hRichard Henderson
We have a subdirectory for semihosting; move this file out of exec. Rename to emphasize the contents are a replacement for the functions in linux-user/bsd-user uaccess.c. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-11target/mips: Fix WatchHi.M handlingMarcin Nowakowski
bit 31 (M) of WatchHiN register is a read-only register indicating whether the next WatchHi register is present. It must not be reset during user writes to the register. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com> Reviewed-by: David Daney <david.daney@fungible.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com> Message-Id: <20220511212953.74738-1-philmd@fungible.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-02-21exec/exec-all: Move 'qemu/log.h' include in units requiring itPhilippe Mathieu-Daudé
Many files use "qemu/log.h" declarations but neglect to include it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is a core component and shouldn't be used that way. Move the "qemu/log.h" inclusion locally to each unit requiring it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220207082756.82600-10-f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-14target/mips: Restrict cpu_exec_interrupt() handler to sysemuPhilippe Mathieu-Daudé
Restrict cpu_exec_interrupt() and its callees to sysemu. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210911165434.531552-15-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-11target/mips: Rewrite UHI errno_mips() using switch statementPhilippe Mathieu-Daudé
Linking on Haiku OS fails: /boot/system/develop/tools/bin/../lib/gcc/x86_64-unknown-haiku/8.3.0/../../../../x86_64-unknown-haiku/bin/ld: error: libqemu-mips-softmmu.fa.p/target_mips_tcg_sysemu_mips-semi.c.o(.rodata) is too large (0xffff405a bytes) /boot/system/develop/tools/bin/../lib/gcc/x86_64-unknown-haiku/8.3.0/../../../../x86_64-unknown-haiku/bin/ld: final link failed: memory exhausted collect2: error: ld returned 1 exit status This is because the host_to_mips_errno[] uses errno as index, for example: static const uint16_t host_to_mips_errno[] = { [ENAMETOOLONG] = 91, ... and Haiku defines [*] ENAMETOOLONG as: 12 /* Error baselines */ 13 #define B_GENERAL_ERROR_BASE INT_MIN .. 22 #define B_STORAGE_ERROR_BASE (B_GENERAL_ERROR_BASE + 0x6000) ... 106 #define B_NAME_TOO_LONG (B_STORAGE_ERROR_BASE + 4) ... 211 #define ENAMETOOLONG B_TO_POSIX_ERROR(B_NAME_TOO_LONG) so the array ends up beeing indeed too big. Since POSIX errno can't be use as indexes on Haiku, rewrite errno_mips() using a switch statement. [*] https://github.com/haiku/haiku/blob/r1beta3/headers/os/support/Errors.h#L130 Reported-by: Richard Zak <richard.j.zak@gmail.com> Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210706130723.1178961-1-f4bug@amsat.org>
2021-06-24target/mips: Constify host_to_mips_errno[]Philippe Mathieu-Daudé
Keep host_to_mips_errno[] in .rodata by marking the array const. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210617174323.2900831-9-f4bug@amsat.org>
2021-06-24target/mips: Fix potential integer overflow (CID 1452921)Philippe Mathieu-Daudé
Use the BIT_ULL() macro to ensure we use 64-bit arithmetic. This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN): CID 1452921: Integer handling issues: Potentially overflowing expression "1 << w" with type "int" (32 bits, signed) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type "uint64_t" (64 bits, unsigned). Fixes: 074cfcb4dae ("target/mips: Implement hardware page table walker") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210505215119.1517465-1-f4bug@amsat.org>
2021-05-02target/mips: Move TLB management helpers to tcg/sysemu/tlb_helper.cPhilippe Mathieu-Daudé
Move TLB management helpers to tcg/sysemu/tlb_helper.c. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-26-f4bug@amsat.org>
2021-05-02target/mips: Move helper_cache() to tcg/sysemu/special_helper.cPhilippe Mathieu-Daudé
Move helper_cache() to tcg/sysemu/special_helper.c. The CACHE opcode is privileged and is not accessible in user emulation. However we get a link failure when restricting the symbol to sysemu. For now, add a stub helper to satisfy linking, which abort if ever called. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210428170410.479308-25-f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 16:51:46 +0000