aboutsummaryrefslogtreecommitdiff
path: root/target/mips/op_helper.c
AgeCommit message (Collapse)Author
2018-10-18target/mips: Implement hardware page table walker for MIPS32Yongbok Kim
Implement hardware page table walker. This implementation is limiter only to MIPS32. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWCtl registerYongbok Kim
Add PWCtl register (CP0 Register 5, Select 6). The PWCtl register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: PWEn (31) - Hardware Page Table walker enable PWDirExt (30) - If 1, 4-th level implemented (MIPS64 only) XK (28) - If 1, walker handles xkseg (MIPS64 only) XS (27) - If 1, walker handles xsseg (MIPS64 only) XU (26) - If 1, walker handles xuseg (MIPS64 only) DPH (7) - Dual Page format of Huge Page support HugePg (6) - Huge Page PTE supported in Directory levels PSn (5..0) - Bit position of PTEvld in Huge Page PTE Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWSize registerYongbok Kim
Add PWSize register (CP0 Register 5, Select 7). The PWSize register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: BDW (37..32) Base Directory index width (MIPS64 only) GDW (29..24) Global Directory index width UDW (23..18) Upper Directory index width MDW (17..12) Middle Directory index width PTW (11..6 ) Page Table index width PTEW ( 5..0 ) Left shift applied to the Page Table index Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWField registerYongbok Kim
Add PWField register (CP0 Register 5, Select 6). The PWField register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: MIPS64: BDI (37..32) - Base Directory index GDI (29..24) - Global Directory index UDI (23..18) - Upper Directory index MDI (17..12) - Middle Directory index PTI (11..6 ) - Page Table index PTEI ( 5..0 ) - Page Table Entry shift MIPS32: GDW (29..24) - Global Directory index UDW (23..18) - Upper Directory index MDW (17..12) - Middle Directory index PTW (11..6 ) - Page Table index PTEW ( 5..0 ) - Page Table Entry shift Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-24target/mips: Fix ERET/ERETNC behavior related to ADEL exceptionYongbok Kim
Fix ERET/ERETNC so that ADEL exception can be raised. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24target/mips: Implement emulation of nanoMIPS ROTX instructionMatthew Fortune
Added a helper for ROTX based on the pseudocode from the architecture spec. This instraction was not present in previous MIPS instruction sets. Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-16target/mips: Don't update BadVAddr register in Debug ModeYongbok Kim
BadVAddr should not be updated if (env->hflags & MIPS_HFLAG_DM) is set. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-06-27target/mips: Raise a RI when given fs is n/a from CTC1Yongbok Kim
Fix to raise a Reserved Instruction exception when given fs is not available from CTC1. Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Reviewed-by: Aleksandar Markovic <aleksandar.markovic@mips.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
2018-05-17target/mips: Remove floatX_maybe_silence_nan from conversionsRichard Henderson
This is now handled properly by the generic softfloat code. Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@mips.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-25accel/tcg: add size paremeter in tlb_fill()Laurent Vivier
The MC68040 MMU provides the size of the access that triggers the page fault. This size is set in the Special Status Word which is written in the stack frame of the access fault exception. So we need the size in m68k_cpu_unassigned_access() and m68k_cpu_handle_mmu_fault(). To be able to do that, this patch modifies the prototype of handle_mmu_fault handler, tlb_fill() and probe_write(). do_unassigned_access() already includes a size parameter. This patch also updates handle_mmu_fault handlers and tlb_fill() of all targets (only parameter, no code change). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
2017-09-21mips: introduce internal.h and cleanup cpu.hPhilippe Mathieu-Daudé
no logical change, only code movement (and fix a comment typo). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Igor Mammedov <imammedo@redhat.com> Tested-by: James Hogan <james.hogan@imgtec.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02target-mips: apply CP0.PageMask before writing into TLB entryLeon Alrae
PFN0 and PFN1 have to be masked out with PageMask_Mask. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [Yongbok Kim: Added commit message] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Add segmentation control registersJames Hogan
The optional segmentation control registers CP0_SegCtl0, CP0_SegCtl1 & CP0_SegCtl2 control the behaviour and required privilege of the legacy virtual memory segments. Add them to the CP0 interface so they can be read and written when CP0_Config3.SC=1, and initialise them to describe the standard legacy layout so they can be used in future patches regardless of whether they are exposed to the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Add an MMU mode for ERLJames Hogan
The segmentation control feature allows a legacy memory segment to become unmapped uncached at error level (according to CP0_Status.ERL), and in fact the user segment is already treated in this way by QEMU. Add a new MMU mode for this state so that QEMU's mappings don't persist between ERL=0 and ERL=1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> [yongbok.kim@imgtec.com: cosmetic changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Abstract mmu_idx from hflagsJames Hogan
The MIPS mmu_idx is sometimes calculated from hflags without an env pointer available as cpu_mmu_index() requires. Create a common hflags_mmu_index() for the purpose of this calculation which can operate on any hflags, not just with an env pointer, and update cpu_mmu_index() itself and gen_intermediate_code() to use it. Also update debug_post_eret() and helper_mtc0_status() to log the MMU mode with the status change (SM, UM, or nothing for kernel mode) based on cpu_mmu_index() rather than directly testing hflags. This will also allow the logic to be more easily updated when a new MMU mode is added. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Add CP0_Ebase.WG (write gate) supportJames Hogan
Add support for the CP0_EBase.WG bit, which allows upper bits to be written (bits 31:30 on MIPS32, or bits 63:30 on MIPS64), along with the CP0_Config5.CV bit to control whether the exception vector for Cache Error exceptions is forced into KSeg1. This is necessary on MIPS32 to support Segmentation Control and Enhanced Virtual Addressing (EVA) extensions (where KSeg1 addresses may not represent an unmapped uncached segment). It is also useful on MIPS64 to allow the exception base to reside in XKPhys, and possibly out of range of KSEG0 and KSEG1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: minor changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Weaken TLB flush on UX,SX,KX,ASID changesJames Hogan
There is no need to invalidate any shadow TLB entries when the ASID changes or when access to one of the 64-bit segments has been disabled, since doing so doesn't reveal to software whether any TLB entries have been evicted into the shadow half of the TLB. Therefore weaken the tlb flushes in these cases to only flush the QEMU TLB. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Fix TLBWI shadow flush for EHINV,XI,RIJames Hogan
Writing specific TLB entries with TLBWI flushes shadow TLB entries unless an existing entry is having its access permissions upgraded. This is necessary as software would from then on expect the previous mapping in that entry to no longer be in effect (even if QEMU has quietly evicted it to the shadow TLB on a TLBWR). However it won't do this if only EHINV, XI, or RI bits have been set, even if that results in a reduction of permissions, so add the necessary checks to invoke the flush when these bits are set. Fixes: 2fb58b73746e ("target-mips: add RI and XI fields to TLB entry") Fixes: 9456c2fbcd82 ("target-mips: add TLBINV support") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: cosmetic changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-09target/mips: hold BQL for timer interruptsYongbok Kim
Hold BQL when accessing timer which can cause interrupts Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-01-13cputlb: drop flush_global flag from tlb_flushAlex Bennée
We have never has the concept of global TLB entries which would avoid the flush so we never actually use this flag. Drop it and make clear that tlb_flush is the sledge-hammer it has always been. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> [DG: ppc portions] Acked-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-10target-mips: Use clz opcodeRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-04 09:59:47 +0000