aboutsummaryrefslogtreecommitdiff
path: root/target/mips/helper.c
AgeCommit message (Collapse)Author
2019-02-21target/mips: implement QMP query-cpu-definitions commandPavel Dovgalyuk
This patch enables QMP-based querying of the available CPU types for MIPS and MIPS64 platforms. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2019-02-14target/mips: reimplement SC instruction emulation and use cmpxchgLeon Alrae
Completely rewrite conditional stores handling. Use cmpxchg. This eliminates need for separate implementations of SC instruction emulation for user and system emulation. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18target/mips: Implement hardware page table walker for MIPS32Yongbok Kim
Implement hardware page table walker. This implementation is limiter only to MIPS32. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-24target/mips: Add updating BadInstr and BadInstrX for nanoMIPSStefan Markovic
Update BadInstr and BadInstrX registers for nanoMIPS. The same support for pre-nanoMIPS remains unimplemented. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-16target/mips: Don't update BadVAddr register in Debug ModeYongbok Kim
BadVAddr should not be updated if (env->hflags & MIPS_HFLAG_DM) is set. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-01-25accel/tcg: add size paremeter in tlb_fill()Laurent Vivier
The MC68040 MMU provides the size of the access that triggers the page fault. This size is set in the Special Status Word which is written in the stack frame of the access fault exception. So we need the size in m68k_cpu_unassigned_access() and m68k_cpu_handle_mmu_fault(). To be able to do that, this patch modifies the prototype of handle_mmu_fault handler, tlb_fill() and probe_write(). do_unassigned_access() already includes a size parameter. This patch also updates handle_mmu_fault handlers and tlb_fill() of all targets (only parameter, no code change). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
2017-09-21mips: introduce internal.h and cleanup cpu.hPhilippe Mathieu-Daudé
no logical change, only code movement (and fix a comment typo). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Igor Mammedov <imammedo@redhat.com> Tested-by: James Hogan <james.hogan@imgtec.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02mips: Add KVM T&E segment support for TCGJames Hogan
MIPS KVM trap & emulate guest kernels have a different segment layout compared with traditional MIPS kernels, to allow both the user and kernel code to run from the user address segment without repeatedly trapping to KVM. QEMU currently supports this layout only for KVM, but its sometimes useful to be able to run these kernels in QEMU on a PC, so enable it for TCG too. This also paves the way for MIPS KVM VZ support (which uses the normal virtual memory layout) by abstracting whether user mode kernel segments are in use. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Reviewed-by: Richard Henderson <rth@twiddle.net> [Yongbok Kim: minor change] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02mips: Improve segment defs for KVM T&E guestsJames Hogan
Improve the segment definitions used by get_physical_address() to yield target_ulong types, e.g. 0xffffffff80000000 instead of 0x80000000. This is in preparation for enabling emulation of MIPS KVM T&E segments in TCG MIPS targets, which unlike KVM could potentially have 64-bit target_ulong. In such a case the offset guest KSEG0 address ends up at e.g. 0x000000008xxxxxxx instead of 0xffffffff8xxxxxxx. This also allows the casts to int32_t that force sign extension to be removed, which removes any confusion due to relational comparison of unsigned (target_ulong) and signed (int32_t) types. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Implement segmentation controlJames Hogan
Implement the optional segmentation control feature in the virtual to physical address translation code. The fixed legacy segment and xkphys handling is replaced with a dynamic layout based on the segmentation control registers (which should be set up even when the feature is not exposed to the guest). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: cosmetic changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Check memory permissions with mem_idxJames Hogan
When performing virtual to physical address translation, check the required privilege level based on the mem_idx rather than the mode in the hflags. This will allow EVA loads & stores to operate safely only on user memory from kernel mode. For the cases where the mmu_idx doesn't need to be overridden (mips_cpu_get_phys_page_debug() and cpu_mips_translate_address()), we calculate the required mmu_idx using cpu_mmu_index(). Note that this only tests the MIPS_HFLAG_KSU bits rather than MIPS_HFLAG_MODE, so we don't test the debug mode hflag MIPS_HFLAG_DM any longer. This should be fine as get_physical_address() only compares against MIPS_HFLAG_UM and MIPS_HFLAG_SM, neither of which should get set by compute_hflags() when MIPS_HFLAG_DM is set. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Add CP0_Ebase.WG (write gate) supportJames Hogan
Add support for the CP0_EBase.WG bit, which allows upper bits to be written (bits 31:30 on MIPS32, or bits 63:30 on MIPS64), along with the CP0_Config5.CV bit to control whether the exception vector for Cache Error exceptions is forced into KSeg1. This is necessary on MIPS32 to support Segmentation Control and Enhanced Virtual Addressing (EVA) extensions (where KSeg1 addresses may not represent an unmapped uncached segment). It is also useful on MIPS64 to allow the exception base to reside in XKPhys, and possibly out of range of KSEG0 and KSEG1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: minor changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Weaken TLB flush on UX,SX,KX,ASID changesJames Hogan
There is no need to invalidate any shadow TLB entries when the ASID changes or when access to one of the 64-bit segments has been disabled, since doing so doesn't reveal to software whether any TLB entries have been evicted into the shadow half of the TLB. Therefore weaken the tlb flushes in these cases to only flush the QEMU TLB. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-17mips: set CP0 Debug DExcCode for SDBBP instructionPavel Dovgalyuk
This patch fixes setting DExcCode field of CP0 Debug register when SDBBP instruction is executed. According to EJTAG specification, this field must be set to the value 9 (Bp). Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-id: 20170502120350.3368.92338.stgit@PASHA-ISP Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2017-03-20target-mips: fix compiler warnings (clang 5)Philippe Mathieu-Daudé
static code analyzer complain: target/mips/helper.c:453:5: warning: Function call argument is an uninitialized value qemu_log_mask(CPU_LOG_MMU, ^~~~~~~~~~~~~~~~~~~~~~~~~~ 'physical' and 'prot' are uninitialized if 'ret' is not TLBRET_MATCH. Reported-by: Clang Static Analyzer Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-01-13cputlb: drop flush_global flag from tlb_flushAlex Bennée
We have never has the concept of global TLB entries which would avoid the flush so we never actually use this flag. Drop it and make clear that tlb_flush is the sledge-hammer it has always been. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> [DG: ppc portions] Acked-by: David Gibson <david@gibson.dropbear.id.au>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-24 02:24:21 +0000