aboutsummaryrefslogtreecommitdiff
path: root/target/mips/cpu.h
AgeCommit message (Collapse)Author
2019-08-29target/mips: Clean up handling of CP0 register 1Aleksandar Markovic
Clean up handling of CP0 register 1. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1567009614-12438-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-29target/mips: Clean up handling of CP0 register 0Aleksandar Markovic
Clean up handling of CP0 register 0. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1567009614-12438-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-20configure: Define target access alignment in configuretony.nguyen@bt.com
This patch moves the define of target access alignment earlier from target/foo/cpu.h to configure. Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now accelerator independent MemOp" Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
2019-08-19target/mips: rationalise softfloat includesAlex Bennée
We should avoid including the whole of softfloat headers in cpu.h and explicitly include it only where we will be calling softfloat functions. We can use the -types.h in cpu.h for the few bits that are global. We also move the restore_snan_bit_mode into internal.h and include -helpers.h there. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-10cpu: Remove CPU_COMMONRichard Henderson
This macro is now always empty, so remove it. This leaves the entire contents of CPUArchState under the control of the guest architecture. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Introduce CPUNegativeOffsetStateRichard Henderson
Nothing in there so far, but all of the plumbing done within the target ArchCPU state. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Move ENV_OFFSET to exec/gen-icount.hRichard Henderson
Now that we have ArchCPU, we can define this generically, in the one place that needs it. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/mips: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace mips_env_get_cpu with env_archcpu. The combination CPU(mips_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Replace ENV_GET_CPU with env_cpuRichard Henderson
Now that we have both ArchCPU and CPUArchState, we can define this generically instead of via macro in each target's cpu.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Define ArchCPURichard Henderson
For all targets, do this just before including exec/cpu-all.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Define CPUArchState with typedefRichard Henderson
For all targets, do this just before including exec/cpu-all.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10tcg: Split out target/arch/cpu-param.hRichard Henderson
For all targets, into this new file move TARGET_LONG_BITS, TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS, TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES. Include this new file from exec/cpu-defs.h. This now removes the somewhat odd requirement that target/arch/cpu.h defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the bulk of the includes within target/arch/cpu.h to the top. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-26target/mips: realign comments to fix checkpatch warningsJules Irenge
Realign comments to fix warnings issued by checkpatc.pl tool "WARNING: Block comments use a leading /* on a separate line" within "target/mips/cpu.h" file. Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190413202818.13622-3-jbi.octave@gmail.com>
2019-05-26target/mips: add or remove space to fix checkpatch errorsJules Irenge
Add or remove space to fix errors issued by checkpatch.pl tool "ERROR: spaces required around that..." "ERROR: space required after that..." "ERROR: space required before the open parenthesis" "ERROR: space required after that..." "ERROR: space prohibited between function name and open parenthesis" "ERROR: code indent should never use tabs" "ERROR: line over 90 characters" within "target/mips/cpu.h" file. Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190413202818.13622-2-jbi.octave@gmail.com>
2019-04-18target: Simplify how the TARGET_cpu_list() printMarkus Armbruster
The various TARGET_cpu_list() take an fprintf()-like callback and a FILE * to pass to it. Their callers (vl.c's main() via list_cpus(), bsd-user/main.c's main(), linux-user/main.c's main()) all pass fprintf() and stdout. Thus, the flexibility provided by the (rather tiresome) indirection isn't actually used. Drop the callback, and call qemu_printf() instead. Calling printf() would also work, but would make the code unsuitable for monitor context without making it simpler. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190417191805.28198-10-armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-14target/mips: introduce MTTCG-enabled buildsAleksandar Markovic
Introduce MTTCG-enabled QEMU builds for mips32, mipsn32, and mips64. Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-14target/mips: reimplement SC instruction emulation and use cmpxchgLeon Alrae
Completely rewrite conditional stores handling. Use cmpxchg. This eliminates need for separate implementations of SC instruction emulation for user and system emulation. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-14target/mips: compare virtual addresses in LL/SC sequenceLeon Alrae
Do only virtual addresses comaprisons in LL/SC sequence emulations. Until this patch, physical addresses had been compared in SC part of LL/SC sequence, even though such comparisons could be avoided. Getting rid of them allows throwing away SC helpers and having common SC implementations in user and system mode, avoiding the need for two separate implementations selected by #ifdef CONFIG_USER_ONLY. Correct guest software should not rely on LL/SC if they accesses the same physical address via different virtual addresses or if page mapping gets changed between LL/SC due to manipulating TLB entries. MIPS Instruction Set Manual clearly says that an RMW sequence must use the same address in the LL and SC (virtual address, physical address, cacheability and coherency attributes must be identical). Otherwise, the result of the SC is not predictable. This patch takes advantage of this fact and removes the virtual->physical address translation from SC helper. lladdr served as Coprocessor 0 LLAddr register which captures physical address of the most recent LL instruction, and also lladdr was used for comparison with following SC physical address. This patch changes the meaning of lladdr - now it will only keep the virtual address of the most recent LL. Additionally, CP0_LLAddr field is introduced which is the actual Coperocessor 0 LLAddr register that guest can access. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24target/mips: Correct the second argument type of cpu_supports_isa()Aleksandar Markovic
"insn_flags" bitfield was expanded from 32-bit to 64-bit in commit f9c9cd63e3. However, this was not reflected on the second argument of the function cpu_supports_isa(). By chance, this did not create some wrong behavior, since the left-most halves of all instances of the second argument are currently all zeros. However, this is still a bug waiting to happen. Correct this by changing the type of the second argument to be always 64-bit. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Introduce 32 R5900 multimedia registersFredrik Noring
The 32 R5900 128-bit registers are split into two 64-bit halves: the lower halves are the GPRs and the upper halves are accessible by the R5900-specific multimedia instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Add CP0 register MemoryMapIDAleksandar Markovic
Add CP0 register MemoryMapID. Only data field is added. The corresponding functionality will be added in future patches. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Amend preprocessor constants for CP0 registersAleksandar Markovic
Correct existing CP0-related preprocessor constants (replace "CPO" with "CP0" (form letter "O" to digit "0", when needed). Besides, add preprocessor constants for CP0 subregisters. The names of the subregisters were chosen to be in sync with the table of corresponding assembler mnemonics found in the documentation for I6500 and I6400 (release 1.0). Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Update ITU to utilize SAARI and SAAR CP0 registersYongbok Kim
Update ITU to utilize SAARI and SAAR CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Provide R/W access to SAARI and SAAR CP0 registersYongbok Kim
Provide R/W access to SAARI and SAAR CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Add fields for SAARI and SAAR CP0 registersYongbok Kim
Add fields for SAARI and SAAR CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Add preprocessor constants for 32 major CP0 registersAleksandar Markovic
Add preprocessor constants for 32 major CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Move comment containing summary of CP0 registersAleksandar Markovic
Move comment containing summary of CP0 registers. Checkpatch script reported some tabs in the resutling diff, so convert these tabs to spaces too. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Introduce MXU registersCraig Janeczek
Define and initialize the 16 MXU registers - 15 general computational register, and 1 control register). There is also a zero register, but it does not have any corresponding variable. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWCtl registerYongbok Kim
Add PWCtl register (CP0 Register 5, Select 6). The PWCtl register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: PWEn (31) - Hardware Page Table walker enable PWDirExt (30) - If 1, 4-th level implemented (MIPS64 only) XK (28) - If 1, walker handles xkseg (MIPS64 only) XS (27) - If 1, walker handles xsseg (MIPS64 only) XU (26) - If 1, walker handles xuseg (MIPS64 only) DPH (7) - Dual Page format of Huge Page support HugePg (6) - Huge Page PTE supported in Directory levels PSn (5..0) - Bit position of PTEvld in Huge Page PTE Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWSize registerYongbok Kim
Add PWSize register (CP0 Register 5, Select 7). The PWSize register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: BDW (37..32) Base Directory index width (MIPS64 only) GDW (29..24) Global Directory index width UDW (23..18) Upper Directory index width MDW (17..12) Middle Directory index width PTW (11..6 ) Page Table index width PTEW ( 5..0 ) Left shift applied to the Page Table index Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWField registerYongbok Kim
Add PWField register (CP0 Register 5, Select 6). The PWField register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: MIPS64: BDI (37..32) - Base Directory index GDI (29..24) - Global Directory index UDI (23..18) - Upper Directory index MDI (17..12) - Middle Directory index PTI (11..6 ) - Page Table index PTEI ( 5..0 ) - Page Table Entry shift MIPS32: GDW (29..24) - Global Directory index UDW (23..18) - Upper Directory index MDW (17..12) - Middle Directory index PTW (11..6 ) - Page Table index PTEW ( 5..0 ) - Page Table Entry shift Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWBase registerYongbok Kim
Add PWBase register (CP0 Register 5, Select 5). The PWBase register contains the Page Table Base virtual address. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Improve DSP R2/R3-related namingStefan Markovic
Do following replacements: ASE_DSPR2 -> ASE_DSP_R2 ASE_DSPR3 -> ASE_DSP_R3 MIPS_HFLAG_DSPR2 -> MIPS_HFLAG_DSP_R2 MIPS_HFLAG_DSPR3 -> MIPS_HFLAG_DSP_R3 check_dspr2() -> check_dsp_r2() check_dspr3() -> check_dsp_r3() and several other similar minor replacements. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add bit definitions for DSP R3 ASEStefan Markovic
Add DSP R3 ASE related bit definition for insn_flags and hflags. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Increase 'supported ISAs/ASEs' flag holder sizePhilippe Mathieu-Daudé
Increase the size of insn_flags holder size to 64 bits. This is needed for future extensions since existing bits are almost all used. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add a comment before each CP0 register section in cpu.hAleksandar Markovic
Add a comment before each CP0 register section in CPUMIPSState definition, thus visually separating these sections. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add a comment with an overview of CP0 registersAleksandar Markovic
Add a comment with an overview of CP0 registers close to the definition of their corresponding fields in CPUMIPSState. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-24target/mips: Implement emulation of nanoMIPS LLWP/SCWP pairAleksandar Rikalo
Implement support for nanoMIPS LLWP/SCWP instructions. Beside adding core functionality of these instructions, this patch adds support for availability control via configuration bit XNP. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-16target/mips: Add CP0 BadInstrX registerStefan Markovic
Add CP0 BadInstrX register. This register will be used in nanoMIPS. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-16target/mips: Update some CP0 registers bit definitionsAleksandar Markovic
Update CP0 registers Config0, Config1, Config2, Config3, Config4, and Config5 bit definitions. Some of these bits will be utilized by upcoming nanoMIPS changes. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-03-19cpu: get rid of unused cpu_init() definesIgor Mammedov
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so no users are left, remove it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc) Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1518000027-274608-6-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-19cpu: add CPU_RESOLVING_TYPE macroIgor Mammedov
it will be used for providing to cpu name resolving class for parsing cpu model for system and user emulation code. Along with change add target to null-machine tests, so that when switch to CPU_RESOLVING_TYPE happens, it would ensure that null-machine usecase still works. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k) Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc) Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore) Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: Added macro to riscv too] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27mips: malta/boston: replace cpu_model with cpu_typeIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-37-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-21mips: replace cpu_mips_init() with cpu_generic_init()Igor Mammedov
now cpu_mips_init() reimplements subset of cpu_generic_init() tasks, so just drop it and use cpu_generic_init() directly. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: use internal.h instead of cpu.h] Tested-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21mips: introduce internal.h and cleanup cpu.hPhilippe Mathieu-Daudé
no logical change, only code movement (and fix a comment typo). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Igor Mammedov <imammedo@redhat.com> Tested-by: James Hogan <james.hogan@imgtec.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Add segmentation control registersJames Hogan
The optional segmentation control registers CP0_SegCtl0, CP0_SegCtl1 & CP0_SegCtl2 control the behaviour and required privilege of the legacy virtual memory segments. Add them to the CP0 interface so they can be read and written when CP0_Config3.SC=1, and initialise them to describe the standard legacy layout so they can be used in future patches regardless of whether they are exposed to the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Add an MMU mode for ERLJames Hogan
The segmentation control feature allows a legacy memory segment to become unmapped uncached at error level (according to CP0_Status.ERL), and in fact the user segment is already treated in this way by QEMU. Add a new MMU mode for this state so that QEMU's mappings don't persist between ERL=0 and ERL=1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> [yongbok.kim@imgtec.com: cosmetic changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Abstract mmu_idx from hflagsJames Hogan
The MIPS mmu_idx is sometimes calculated from hflags without an env pointer available as cpu_mmu_index() requires. Create a common hflags_mmu_index() for the purpose of this calculation which can operate on any hflags, not just with an env pointer, and update cpu_mmu_index() itself and gen_intermediate_code() to use it. Also update debug_post_eret() and helper_mtc0_status() to log the MMU mode with the status change (SM, UM, or nothing for kernel mode) based on cpu_mmu_index() rather than directly testing hflags. This will also allow the logic to be more easily updated when a new MMU mode is added. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Add CP0_Ebase.WG (write gate) supportJames Hogan
Add support for the CP0_EBase.WG bit, which allows upper bits to be written (bits 31:30 on MIPS32, or bits 63:30 on MIPS64), along with the CP0_Config5.CV bit to control whether the exception vector for Cache Error exceptions is forced into KSeg1. This is necessary on MIPS32 to support Segmentation Control and Enhanced Virtual Addressing (EVA) extensions (where KSeg1 addresses may not represent an unmapped uncached segment). It is also useful on MIPS64 to allow the exception base to reside in XKPhys, and possibly out of range of KSEG0 and KSEG1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: minor changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 01:40:25 +0000