aboutsummaryrefslogtreecommitdiff
path: root/target/i386
AgeCommit message (Collapse)Author
2023-06-29target/i386: ignore ARCH_CAPABILITIES features in user mode emulationPaolo Bonzini
ARCH_CAPABILITIES is only accessible through a read-only MSR, so it has no impact on any user-mode operation (user-mode cannot read the MSR). So do not bother printing warnings about it in user mode emulation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-29target/i386: Export MSR_ARCH_CAPABILITIES bits to guestsPawan Gupta
On Intel CPUs there are certain bits in MSR_ARCH_CAPABILITIES that indicates if the CPU is not affected by a vulnerability. Without these bits guests may try to deploy the mitigation even if the CPU is not affected. Export the bits to guests that indicate immunity to hardware vulnerabilities. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Message-ID: <63d85cc76d4cdc51e6c732478b81d8f13be11e5a.1687551881.git.pawan.kumar.gupta@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-28exec/memory: Add symbolic value for memory listener priority for accelIsaku Yamahata
Add MEMORY_LISTNER_PRIORITY_ACCEL for the symbolic value for the memory listener to replace the hard-coded value 10 for accel. No functional change intended. Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <feebe423becc6e2aa375f59f6abce9a85bc15abb.1687279702.git.isaku.yamahata@intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-28target/i386/WHPX: Fix error message when fail to set ProcessorCountZhao Liu
003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology") changes the meaning of MachineState.smp.cores from "the number of cores in one package" to "the number of cores in one die" and doesn't fix other uses of MachineState.smp.cores. And because of the introduction of cluster, now smp.cores just means "the number of cores in one cluster". This clearly does not fit the semantics here. And before this error message, WHvSetPartitionProperty() is called to set prop.ProcessorCount. So the error message should show the prop.ProcessorCount other than "cores per cluster" or "cores per package". Cc: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230529124331.412822-1-zhao1.liu@linux.intel.com> [PMD: Use '%u' format for ProcessorCount] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-28accel: Rename HVF 'struct hvf_vcpu_state' -> AccelCPUStatePhilippe Mathieu-Daudé
We want all accelerators to share the same opaque pointer in CPUState. Rename the 'hvf_vcpu_state' structure as 'AccelCPUState'. Use the generic 'accel' field of CPUState instead of 'hvf'. Replace g_malloc0() by g_new0() for readability. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20230624174121.11508-17-philmd@linaro.org>
2023-06-28accel: Rename 'cpu_state' -> 'cs'Philippe Mathieu-Daudé
Most of the codebase uses 'CPUState *cpu' or 'CPUState *cs'. While 'cpu_state' is kind of explicit, it makes the code harder to review. Simply rename as 'cs'. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20230624174121.11508-16-philmd@linaro.org>
2023-06-28accel: Inline WHPX get_whpx_vcpu()Philippe Mathieu-Daudé
No need for this helper to access the CPUState::accel field. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230624174121.11508-15-philmd@linaro.org>
2023-06-28accel: Rename WHPX 'struct whpx_vcpu' -> AccelCPUStatePhilippe Mathieu-Daudé
We want all accelerators to share the same opaque pointer in CPUState. Rename WHPX 'whpx_vcpu' as 'AccelCPUState'; use the typedef. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230624174121.11508-14-philmd@linaro.org>
2023-06-28accel: Remove WHPX unreachable error pathPhilippe Mathieu-Daudé
g_new0() can not fail. Remove the unreachable error path. https://developer-old.gnome.org/glib/stable/glib-Memory-Allocation.html#glib-Memory-Allocation.description Reported-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230624174121.11508-13-philmd@linaro.org>
2023-06-28accel: Inline NVMM get_qemu_vcpu()Philippe Mathieu-Daudé
No need for this helper to access the CPUState::accel field. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230624174121.11508-12-philmd@linaro.org>
2023-06-28accel: Rename NVMM 'struct qemu_vcpu' -> AccelCPUStatePhilippe Mathieu-Daudé
We want all accelerators to share the same opaque pointer in CPUState. Rename NVMM 'qemu_vcpu' as 'AccelCPUState'; directly use the typedef, remove unnecessary casts. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230624174121.11508-11-philmd@linaro.org>
2023-06-28accel: Remove NVMM unreachable error pathPhilippe Mathieu-Daudé
g_malloc0() can not fail. Remove the unreachable error path. https://developer-old.gnome.org/glib/stable/glib-Memory-Allocation.html#glib-Memory-Allocation.description Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230624174121.11508-10-philmd@linaro.org>
2023-06-28accel: Move HAX hThread to accelerator contextPhilippe Mathieu-Daudé
hThread variable is only used by the HAX accelerator, so move it to the accelerator specific context. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230624174121.11508-9-philmd@linaro.org>
2023-06-28accel: Rename HAX 'struct hax_vcpu_state' -> AccelCPUStatePhilippe Mathieu-Daudé
We want all accelerators to share the same opaque pointer in CPUState. Start with the HAX context, renaming its forward declarated structure 'hax_vcpu_state' as 'AccelCPUState'. Document the CPUState field. Directly use the typedef. Remove the amusing but now unnecessary casts in NVMM / WHPX. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230624174121.11508-8-philmd@linaro.org>
2023-06-28accel: Rename 'hax_vcpu' as 'accel' in CPUStatePhilippe Mathieu-Daudé
All accelerators will share a single opaque context in CPUState. Start by renaming 'hax_vcpu' as 'accel'. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230624174121.11508-7-philmd@linaro.org>
2023-06-28accel: Destroy HAX vCPU threads once donePhilippe Mathieu-Daudé
When the vCPU thread finished its processing, destroy it and signal its destruction to generic vCPU management layer. Add a sanity check for the vCPU accelerator context. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230624174121.11508-6-philmd@linaro.org>
2023-06-28accel: Fix a leak on Windows HAXPhilippe Mathieu-Daudé
hThread is only used on the error path in hax_kick_vcpu_thread(). Fixes: b0cb0a66d6 ("Plumb the HAXM-based hardware acceleration support") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230624174121.11508-5-philmd@linaro.org>
2023-06-28accel: Remove unused hThread variable on TCG/WHPXPhilippe Mathieu-Daudé
On Windows hosts, cpu->hThread is assigned but never accessed: remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230624174121.11508-4-philmd@linaro.org>
2023-06-28accel: Re-enable WHPX cross-build on case sensitive filesystemsPhilippe Mathieu-Daudé
Since MinGW commit 395dcfdea ("rename hyper-v headers and def files to lower case") [*], WinHvPlatform.h and WinHvEmulation.h got respectively renamed as winhvplatform.h / winhvemulation.h. The mingw64-headers package included in the Fedora version we use for CI does include this commit; and meson fails to detect these present-but-renamed headers while cross-building (on case-sensitive filesystems). Use the renamed header in order to detect and successfully cross-build with the WHPX accelerator. Note, on Windows hosts, the libraries are still named as WinHvPlatform.dll and WinHvEmulation.dll, so we don't bother renaming the definitions used by load_whp_dispatch_fns() in target/i386/whpx/whpx-all.c. [*] https://sourceforge.net/p/mingw-w64/mingw-w64/ci/395dcfdea Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230624142211.8888-3-philmd@linaro.org>
2023-06-26target: Widen pc/cs_base in cpu_get_tb_cpu_stateAnton Johansson
Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621135633.1649-4-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26target/i386: implement SYSCALL/SYSRET in 32-bit emulatorsPaolo Bonzini
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only exposes it for 64-bit targets. For system emulation just reuse the helper; for user-mode emulation the ABI is the same as "int $80". The BSDs does not support any fast system call mechanism in 32-bit mode so add to bsd-user the same stub that FreeBSD has for 64-bit compatibility mode. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: implement RDPID in TCGPaolo Bonzini
RDPID corresponds to a RDMSR(TSC_AUX); however, it is unprivileged so for user-mode emulation we must provide the value that the kernel places in the MSR. For Linux, it is a combination of the current CPU and the current NUMA node, both of which can be retrieved with getcpu(2). Also try sched_getcpu(), which might be there on the BSDs. If there is no portable way to retrieve the current CPU id from userspace, return 0. RDTSCP is reimplemented as RDTSC + RDPID ECX; the differences in terms of serializability are not relevant to QEMU. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: sysret and sysexit are privilegedPaolo Bonzini
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: AMD only supports SYSENTER/SYSEXIT in 32-bit modePaolo Bonzini
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: Intel only supports SYSCALL/SYSRET in long modePaolo Bonzini
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: TCG supports WBNOINVDPaolo Bonzini
WBNOINVD is the same as INVD or WBINVD as far as TCG is concerned, since there is no cache in TCG and therefore no invalidation side effect in WBNOINVD. With respect to SVM emulation, processors that do not support WBNOINVD will ignore the prefix and treat it as WBINVD, while those that support it will generate exactly the same vmexit. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: TCG supports XSAVEERPTRPaolo Bonzini
XSAVEERPTR is actually a fix for an errata; TCG does not have the issue. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: do not accept RDSEED if CPUID bit absentPaolo Bonzini
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: TCG supports RDSEEDPaolo Bonzini
TCG implements RDSEED, and in fact uses qcrypto_random_bytes which is secure enough to match hardware behavior. Expose it to guests. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: TCG supports 3DNow! prefetch(w)Paolo Bonzini
The AMD prefetch(w) instructions have not been deprecated together with the rest of 3DNow!, and in fact are even supported by newer Intel processor. Mark them as supported by TCG, as it supports all of 3DNow!. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-26target/i386: fix INVD vmexitPaolo Bonzini
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated. Fix it (but not that fixing just the typo would break both INVD and WBINVD, due to a case of two wrongs making a right). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20meson: Replace CONFIG_SOFTMMU -> CONFIG_SYSTEM_ONLYPhilippe Mathieu-Daudé
Since we *might* have user emulation with softmmu, use the clearer 'CONFIG_SYSTEM_ONLY' key to check for system emulation. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-9-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20target/i386: Simplify i386_tr_init_disas_context()Philippe Mathieu-Daudé
Since cpu_mmu_index() is well-defined for user-only, we can remove the surrounding #ifdef'ry entirely. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-2-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-13target/i386: Rename helper template headers as '.h.inc'Philippe Mathieu-Daudé
Since commit 139c1837db ("meson: rename included C source files to .c.inc"), QEMU standard procedure for included C files is to use *.c.inc. Besides, since commit 6a0057aa22 ("docs/devel: make a statement about includes") this is documented as the Coding Style: If you do use template header files they should be named with the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are being included for expansion. Therefore move the included templates in the tcg/ directory and rename as '.h.inc'. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230608133108.72655-5-philmd@linaro.org>
2023-06-13target/i386/helper: Shuffle do_cpu_init()Philippe Mathieu-Daudé
Move the #ifdef'ry inside do_cpu_init() instead of declaring an empty stub for user emulation. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230602224628.59546-3-philmd@linaro.org>
2023-06-13target/i386/helper: Remove do_cpu_sipi() stub for user-mode emulationPhilippe Mathieu-Daudé
Since commit 604664726f ("target/i386: Restrict cpu_exec_interrupt() handler to sysemu"), do_cpu_sipi() isn't called anymore on user emulation. Remove the now pointless stub. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230602224628.59546-2-philmd@linaro.org>
2023-06-06hvf: add guest debugging handlers for Apple Silicon hostsFrancesco Cagnin
Guests can now be debugged through the gdbstub. Support is added for single-stepping, software breakpoints, hardware breakpoints and watchpoints. The code has been structured like the KVM counterpart. While guest debugging is enabled, the guest can still read and write the DBG*_EL1 registers but they don't have any effect. Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com> Message-id: 20230601153107.81955-5-fcagnin@quarkslab.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hvf: add breakpoint handlersFrancesco Cagnin
Required for guest debugging. The code has been structured like the KVM counterpart. Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com> Message-id: 20230601153107.81955-4-fcagnin@quarkslab.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-05accel/tcg: Introduce translator_io_startRichard Henderson
New wrapper around gen_io_start which takes care of the USE_ICOUNT check, as well as marking the DisasContext to end the TB. Remove exec/gen-icount.h. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05tcg: Add insn_start_words to TCGContextRichard Henderson
This will enable replacement of TARGET_INSN_START_WORDS in tcg.c. Split out "tcg/insn-start-words.h" and use it in target/. Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05tcg: Pass TCGHelperInfo to tcg_gen_callNRichard Henderson
In preparation for compiling tcg/ only once, eliminate the all_helpers array. Instantiate the info structs for the generic helpers in accel/tcg/, and the structs for the target-specific helpers in each translate.c. Since we don't see all of the info structs at startup, initialize at first use, using g_once_init_* to make sure we don't race while doing so. Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05*: Add missing includes of tcg/tcg.hRichard Henderson
This had been pulled in from exec/cpu_ldst.h, via exec/exec-all.h, but the include of tcg.h will be removed. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-25target/i386: EPYC-Rome model without XSAVESMaksim Davydov
Based on the kernel commit "b0563468ee x86/CPU/AMD: Disable XSAVES on AMD family 0x17", host system with EPYC-Rome can clear XSAVES capability bit. In another words, EPYC-Rome host without XSAVES can occur. Thus, we need an EPYC-Rome cpu model (without this feature) that matches the solution of fixing this erratum Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru> Message-Id: <20230524213748.8918-1-davydov-max@yandex-team.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-18target/i386: Fix exception classes for MOVNTPS/MOVNTPD.Ricky Zhou
Before this change, MOVNTPS and MOVNTPD were labeled as Exception Class 4 (only requiring alignment for legacy SSE instructions). This changes them to Exception Class 1 (always requiring memory alignment), as documented in the Intel manual. Message-Id: <20230501111428.95998-3-ricky@rzhou.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-18target/i386: Fix exception classes for SSE/AVX instructions.Ricky Zhou
Fix the exception classes for some SSE/AVX instructions to match what is documented in the Intel manual. These changes are expected to have no functional effect on the behavior that qemu implements (primarily >= 16-byte memory alignment checks). For instance, since qemu does not implement the AC flag, there is no difference in behavior between Exception Classes 4 and 5 for instructions where the SSE version only takes <16 byte memory operands. Message-Id: <20230501111428.95998-2-ricky@rzhou.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-18target/i386: Fix and add some comments next to SSE/AVX instructions.Ricky Zhou
Adds some comments describing what instructions correspond to decoding table entries and fixes some existing comments which named the wrong instruction. Message-Id: <20230501111428.95998-1-ricky@rzhou.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-18target/i386: fix avx2 instructions vzeroall and vpermdqXinyu Li
vzeroall: xmm_regs should be used instead of xmm_t0 vpermdq: bit 3 and 7 of imm should be considered Signed-off-by: Xinyu Li <lixinyu20s@ict.ac.cn> Message-Id: <20230510145222.586487-1-lixinyu20s@ict.ac.cn> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-18target/i386: fix operand size for VCOMI/VUCOMI instructionsPaolo Bonzini
Compared to other SSE instructions, VUCOMISx and VCOMISx are different: the single and double precision versions are distinguished through a prefix, however they use no-prefix and 0x66 for SS and SD respectively. Scalar values usually are associated with 0xF2 and 0xF3. Because of these, they incorrectly perform a 128-bit memory load instead of a 32- or 64-bit load. Fix this by writing a custom decoding function. I tested that the reproducer is fixed and the test-avx output does not change. Reported-by: Gabriele Svelto <gsvelto@mozilla.com> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1637 Fixes: f8d19eec0d53 ("target/i386: reimplement 0x0f 0x28-0x2f, add AVX", 2022-10-18) Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-18target/i386: add support for FB_CLEAR featureEmanuele Giuseppe Esposito
As reported by the Intel's doc: "FB_CLEAR: The processor will overwrite fill buffer values as part of MD_CLEAR operations with the VERW instruction. On these processors, L1D_FLUSH does not overwrite fill buffer values." If this cpu feature is present in host, allow QEMU to choose whether to show it to the guest too. One disadvantage of not exposing it is that the guest will report a non existing vulnerability in /sys/devices/system/cpu/vulnerabilities/mmio_stale_data because the mitigation is present only when the cpu has (FLUSH_L1D and MD_CLEAR) or FB_CLEAR features enabled. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20230201135759.555607-3-eesposit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:19:33 +0000