aboutsummaryrefslogtreecommitdiff
path: root/target/i386
AgeCommit message (Collapse)Author
2019-06-21i386/kvm: add support for KVM_GET_SUPPORTED_HV_CPUIDVitaly Kuznetsov
KVM now supports reporting supported Hyper-V features through CPUID (KVM_GET_SUPPORTED_HV_CPUID ioctl). Going forward, this is going to be the only way to announce new functionality and this has already happened with Direct Mode stimers. While we could just support KVM_GET_SUPPORTED_HV_CPUID for new features, it seems to be beneficial to use it for all Hyper-V enlightenments when possible. This way we can implement 'hv-all' pass-through mode giving the guest all supported Hyper-V features even when QEMU knows nothing about them. Implementation-wise we create a new kvm_hyperv_properties structure defining Hyper-V features, get_supported_hv_cpuid()/ get_supported_hv_cpuid_legacy() returning the supported CPUID set and a bit over-engineered hv_cpuid_check_and_set() which we will also be used to set cpu->hyperv_* properties for 'hv-all' mode. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20190517141924.19024-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21i386/kvm: convert hyperv enlightenments properties from bools to bitsVitaly Kuznetsov
Representing Hyper-V properties as bits will allow us to check features and dependencies between them in a natural way. Suggested-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20190517141924.19024-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21hax: Honor CPUState::haltedColin Xu
QEMU tracks whether a vcpu is halted using CPUState::halted. E.g., after initialization or reset, halted is 0 for the BSP (vcpu 0) and 1 for the APs (vcpu 1, 2, ...). A halted vcpu should not be handed to the hypervisor to run (e.g. hax_vcpu_run()). Under HAXM, Android Emulator sometimes boots into a "vcpu shutdown request" error while executing in SeaBIOS, with the HAXM driver logging a guest triple fault in vcpu 1, 2, ... at RIP 0x3. That is ultimately because the HAX accelerator asks HAXM to run those APs when they are still in the halted state. Normally, the vcpu thread for an AP will start by looping in qemu_wait_io_event(), until the BSP kicks it via a pair of IPIs (INIT followed by SIPI). But because the HAX accelerator does not honor cpu->halted, it allows the AP vcpu thread to proceed to hax_vcpu_run() as soon as it receives any kick, even if the kick does not come from the BSP. It turns out that emulator has a worker thread which periodically kicks every vcpu thread (possibly to collect CPU usage data), and if one of these kicks comes before those by the BSP, the AP will start execution from the wrong RIP, resulting in the aforementioned SMP boot failure. The solution is inspired by the KVM accelerator (credit to Chuanxiao Dong <chuanxiao.dong@intel.com> for the pointer): 1. Get rid of questionable logic that unconditionally resets cpu->halted before hax_vcpu_run(). Instead, only reset it at the right moments (there are only a few "unhalt" events). 2. Add a check for cpu->halted before hax_vcpu_run(). Note that although the non-Unrestricted Guest (!ug_platform) code path also forcibly resets cpu->halted, it is left untouched, because only the UG code path supports SMP guests. The patch is first merged to android emulator with Change-Id: I9c5752cc737fd305d7eace1768ea12a07309d716 Cc: Yu Ning <yu.ning@intel.com> Cc: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Message-Id: <20190610021939.13669-1-colin.xu@intel.com>
2019-06-12Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' ↵Peter Maydell
into staging Miscellaneous patches for 2019-06-11 # gpg: Signature made Wed 12 Jun 2019 12:20:41 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-misc-2019-06-11-v3: MAINTAINERS: Polish headline decorations MAINTAINERS: Improve section headlines MAINTAINERS: Remove duplicate entries of qemu-devel@nongnu.org Clean up a header guard symbols (again) Supply missing header guards Clean up a few header guard symbols scripts/clean-header-guards: Fix handling of trailing comments Normalize position of header guard Include qemu-common.h exactly where needed Include qemu/module.h where needed, drop it from qemu-common.h qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-12Normalize position of header guardMarkus Armbruster
This is the common header guard idiom: /* * File comment */ #ifndef GUARD_SYMBOL_H #define GUARD_SYMBOL_H ... actual contents ... #endif A few of our headers have some #include before the guard. target/tilegx/spr_def_64.h has #ifndef __DOXYGEN__ outside the guard. A few more have the #define elsewhere. Change them to match the common idiom. For spr_def_64.h, that means dropping #ifndef __DOXYGEN__. While there, rename guard symbols to make scripts/clean-header-guards.pl happy. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-2-armbru@redhat.com> [Rebased with conflicts resolved automatically]
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-11qemu-common: Move tcg_enabled() etc. to sysemu/tcg.hMarkus Armbruster
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h, sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in qemu-common.h. This necessitates inclusion of qemu-common.h into headers, which is against the rules spelled out in qemu-common.h's file comment. Move tcg_enabled() & friends into their own header sysemu/tcg.h, and adjust #include directives. Cc: Richard Henderson <rth@twiddle.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Rebased with conflicts resolved automatically, except for accel/tcg/tcg-all.c]
2019-06-11i386: Save EFER for 32-bit targetsPavel Dovgalyuk
i386 (32 bit) emulation uses EFER in wrmsr and in MMU fault processing. But it does not included in VMState, because "efer" field is disabled with This patch adds a section for 32-bit targets which saves EFER when it's value is non-zero. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <155913371654.8429.1659082639780315242.stgit@pasha-Precision-3630-Tower> Reviewed-by: Peter Xu <peterx@redhat.com> [ehabkost: indentation fix] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-11i386: "unavailable-features" QOM propertyEduardo Habkost
Add a "unavailable-features" QOM property to X86CPU objects that have the same semantics of "unavailable-features" on query-cpu-definitions. The new property has the same goal of "filtered-features", but is generic enough to let any kind of CPU feature to be listed there without relying on low level details like CPUID leaves or MSR numbers. Message-Id: <20190422234742.15780-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-11i386: x86_cpu_list_feature_names() functionEduardo Habkost
Extract feature name listing code from x86_cpu_class_check_missing_features(). It will be reused to return information about CPU filtered features at runtime. Message-Id: <20190422234742.15780-2-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-10cpu: Remove CPU_COMMONRichard Henderson
This macro is now always empty, so remove it. This leaves the entire contents of CPUArchState under the control of the guest architecture. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Introduce CPUNegativeOffsetStateRichard Henderson
Nothing in there so far, but all of the plumbing done within the target ArchCPU state. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Introduce cpu_set_cpustate_pointersRichard Henderson
Consolidate some boilerplate from foo_cpu_initfn. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Move ENV_OFFSET to exec/gen-icount.hRichard Henderson
Now that we have ArchCPU, we can define this generically, in the one place that needs it. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/i386: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace x86_env_get_cpu with env_archcpu. The combination CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Replace ENV_GET_CPU with env_cpuRichard Henderson
Now that we have both ArchCPU and CPUArchState, we can define this generically instead of via macro in each target's cpu.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Define ArchCPURichard Henderson
For all targets, do this just before including exec/cpu-all.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Define CPUArchState with typedefRichard Henderson
For all targets, do this just before including exec/cpu-all.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10tcg: Split out target/arch/cpu-param.hRichard Henderson
For all targets, into this new file move TARGET_LONG_BITS, TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS, TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES. Include this new file from exec/cpu-defs.h. This now removes the somewhat odd requirement that target/arch/cpu.h defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the bulk of the includes within target/arch/cpu.h to the top. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-03i386: Enable IA32_MISC_ENABLE MWAIT bit when exposing mwait/monitorWanpeng Li
The CPUID.01H:ECX[bit 3] ought to mirror the value of the MSR IA32_MISC_ENABLE MWAIT bit and as userspace has control of them both, it is userspace's job to configure both bits to match on the initial setup. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1557813999-9175-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-23Merge remote-tracking branch 'remotes/rth/tags/pull-rng-20190522' into stagingPeter Maydell
Introduce qemu_guest_getrandom. Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices. Use qemu_guest_getrandom in target/ppc darn instruction. Support ARMv8.5-RNG extension. Support x86 RDRAND extension. Acked-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Laurent Vivier <laurent@vivier.eu> # gpg: Signature made Wed 22 May 2019 19:36:43 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-rng-20190522: (25 commits) target/i386: Implement CPUID_EXT_RDRAND target/ppc: Use qemu_guest_getrandom for DARN target/ppc: Use gen_io_start/end around DARN target/arm: Implement ARMv8.5-RNG target/arm: Put all PAC keys into a structure hw/misc/exynos4210_rng: Use qemu_guest_getrandom hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofail hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofail aspeed/scu: Use qemu_guest_getrandom_nofail linux-user: Remove srand call linux-user/aarch64: Use qemu_guest_getrandom for PAUTH keys linux-user: Use qemu_guest_getrandom_nofail for AT_RANDOM linux-user: Call qcrypto_init if not using -seed linux-user: Initialize pseudo-random seeds for all guest cpus cpus: Initialize pseudo-random seeds for all guest cpus util: Add qemu_guest_getrandom and associated routines ui/vnc: Use gcrypto_random_bytes for start_auth_vnc ui/vnc: Split out authentication_failed crypto: Change the qcrypto_random_bytes buffer type to void* crypto: Use getrandom for qcrypto_random_bytes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-22target/i386: Implement CPUID_EXT_RDRANDRichard Henderson
We now have an interface for guest visible random numbers. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-21target/i386: add MDS-NO featurePaolo Bonzini
Microarchitectural Data Sampling is a hardware vulnerability which allows unprivileged speculative access to data which is available in various CPU internal buffers. Some Intel processors use the ARCH_CAP_MDS_NO bit in the IA32_ARCH_CAPABILITIES MSR to report that they are not vulnerable, make it available to guests. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20190516185320.28340-1-pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-21target/i386: define md-clear bitPaolo Bonzini
md-clear is a new CPUID bit which is set when microcode provides the mechanism to invoke a flush of various exploitable CPU buffers by invoking the VERW instruction. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20190515141011.5315-2-berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-17Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
Mostly bugfixes and cleanups, the most important being "megasas: fix mapped frame size" from Peter Lieven. In addition, -realtime is marked as deprecated. # gpg: Signature made Fri 17 May 2019 14:25:11 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (21 commits) hw/net/ne2000: Extract the PCI device from the chipset common code hw/char: Move multi-serial devices into separate file ioapic: allow buggy guests mishandling level-triggered interrupts to make progress build: don't build hardware objects with linux-user build: chardev is only needed for softmmu targets configure: qemu-ga is only needed with softmmu targets build: replace GENERATED_FILES by generated-files-y trace: only include trace-event-subdirs when they are needed sun4m: obey -vga none mips-fulong2e: obey -vga none hw/i386/acpi: Assert a pointer is not null BEFORE using it hw/i386/acpi: Add object_resolve_type_unambiguous to improve modularity hw/acpi/piix4: Move TYPE_PIIX4_PM to a public header memory: correct the comment to DIRTY_MEMORY_MIGRATION vl: fix -sandbox parsing crash when seccomp support is disabled hvf: Add missing break statement megasas: fix mapped frame size vl: Add missing descriptions to the VGA adapters list Declare -realtime as deprecated roms: assert if max rom size is less than the used size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-17hvf: Add missing break statementChen Zhang
In target/i386/hvf/hvf.c, a break statement was probably missing in `hvf_vcpu_exec()`, in handling EXIT_REASON_HLT. These lines seemed to be equivalent to `kvm_handle_halt()`. Signed-off-by: Chen Zhang <tgfbeta@me.com> Message-Id: <087F1D9C-109D-41D1-BE2C-CE5D840C981B@me.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-16Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190510' into stagingPeter Maydell
Add CPUClass::tlb_fill. Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads. # gpg: Signature made Fri 10 May 2019 19:48:37 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20190510: (27 commits) tcg: Use tlb_fill probe from tlb_vaddr_to_host tcg: Remove CPUClass::handle_mmu_fault tcg: Use CPUClass::tlb_fill in cputlb.c target/xtensa: Convert to CPUClass::tlb_fill target/unicore32: Convert to CPUClass::tlb_fill target/tricore: Convert to CPUClass::tlb_fill target/tilegx: Convert to CPUClass::tlb_fill target/sparc: Convert to CPUClass::tlb_fill target/sh4: Convert to CPUClass::tlb_fill target/s390x: Convert to CPUClass::tlb_fill target/riscv: Convert to CPUClass::tlb_fill target/ppc: Convert to CPUClass::tlb_fill target/openrisc: Convert to CPUClass::tlb_fill target/nios2: Convert to CPUClass::tlb_fill target/moxie: Convert to CPUClass::tlb_fill target/mips: Convert to CPUClass::tlb_fill target/mips: Tidy control flow in mips_cpu_handle_mmu_fault target/mips: Pass a valid error to raise_mmu_exception for user-only target/microblaze: Convert to CPUClass::tlb_fill target/m68k: Convert to CPUClass::tlb_fill ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-13Normalize header guard symbol definition.Markus Armbruster
We commonly define the header guard symbol without an explicit value. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-8-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-13Clean up ill-advised or unusual header guardsMarkus Armbruster
Leading underscores are ill-advised because such identifiers are reserved. Trailing underscores are merely ugly. Strip both. Our header guards commonly end in _H. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-7-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Changes to slirp/ dropped, as we're about to spin it off]
2019-05-13Clean up header guards that don't match their file nameMarkus Armbruster
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-6-armbru@redhat.com> [Rebase to master: update include/hw/net/ne2000-isa.h]
2019-05-13Use #include "..." for our own headers, <...> for othersMarkus Armbruster
Also delete a few redundant #include. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-2-armbru@redhat.com>
2019-05-10tcg: Use CPUClass::tlb_fill in cputlb.cRichard Henderson
We can now use the CPUClass hook instead of a named function. Create a static tlb_fill function to avoid other changes within cputlb.c. This also isolates the asserts within. Remove the named tlb_fill function from all of the targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10target/i386: Convert to CPUClass::tlb_fillRichard Henderson
We do not support probing, but we do not need it yet either. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-28Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190426' into stagingPeter Maydell
Add tcg_gen_extract2_*. Deal with overflow of TranslationBlocks. Respect access_type in io_readx. # gpg: Signature made Fri 26 Apr 2019 18:17:01 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20190426: cputlb: Fix io_readx() to respect the access_type tcg/arm: Restrict constant pool displacement to 12 bits tcg/ppc: Allow the constant pool to overflow at 32k tcg: Restart TB generation after out-of-line ldst overflow tcg: Restart TB generation after constant pool overflow tcg: Restart TB generation after relocation overflow tcg: Restart after TB code generation overflow tcg: Hoist max_insns computation to tb_gen_code tcg/aarch64: Support INDEX_op_extract2_{i32,i64} tcg/arm: Support INDEX_op_extract2_i32 tcg/i386: Support INDEX_op_extract2_{i32,i64} tcg: Use extract2 in tcg_gen_deposit_{i32,i64} tcg: Use deposit and extract2 in tcg_gen_shifti_i64 tcg: Add INDEX_op_extract2_{i32,i64} tcg: Implement tcg_gen_extract2_{i32,i64} Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-25Pass through cache information for TOPOEXT CPUsStanislav Lanci
Signed-off-by: Stanislav Lanci <pixo@polepetko.eu> Message-Id: <20190416123833.60649-1-pixo@polepetko.eu> [ehabkost: removed redundant comment line] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-04-25i386: Add new Hygon 'Dhyana' CPU modelPu Wen
Add a new base CPU model called 'Dhyana' to model processors from Hygon Dhyana(family 18h), which derived from AMD EPYC(family 17h). The following features bits have been removed compare to AMD EPYC: aes, pclmulqdq, sha_ni The Hygon Dhyana support to KVM in Linux is already accepted upstream[1]. So add Hygon Dhyana support to Qemu is necessary to create Hygon's own CPU model. Reference: [1] https://git.kernel.org/tip/fec98069fb72fb656304a3e52265e0c2fc9adf87 Signed-off-by: Pu Wen <puwen@hygon.cn> Message-Id: <1555416373-28690-1-git-send-email-puwen@hygon.cn> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-04-24tcg: Hoist max_insns computation to tb_gen_codeRichard Henderson
In order to handle TB's that translate to too much code, we need to place the control of the length of the translation in the hands of the code gen master loop. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-18qom/cpu: Simplify how CPUClass:cpu_dump_state() printsMarkus Armbruster
CPUClass method dump_statistics() takes an fprintf()-like callback and a FILE * to pass to it. Most callers pass fprintf() and stderr. log_cpu_state() passes fprintf() and qemu_log_file. hmp_info_registers() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The callback gets passed around a lot, which is tiresome. The type-punning around monitor_fprintf() is ugly. Drop the callback, and call qemu_fprintf() instead. Also gets rid of the type-punning, since qemu_fprintf() takes NULL instead of the current monitor cast to FILE *. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2019-04-18target/i386: Simplify how x86_cpu_dump_local_apic_state() printsMarkus Armbruster
x86_cpu_dump_local_apic_state() takes an fprintf()-like callback and a FILE * to pass to it, and so do its helper functions. Its only caller hmp_info_local_apic() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The type-punning is ugly. Drop the callback, and call qemu_printf() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-12-armbru@redhat.com>
2019-04-18target: Simplify how the TARGET_cpu_list() printMarkus Armbruster
The various TARGET_cpu_list() take an fprintf()-like callback and a FILE * to pass to it. Their callers (vl.c's main() via list_cpus(), bsd-user/main.c's main(), linux-user/main.c's main()) all pass fprintf() and stdout. Thus, the flexibility provided by the (rather tiresome) indirection isn't actually used. Drop the callback, and call qemu_printf() instead. Calling printf() would also work, but would make the code unsuitable for monitor context without making it simpler. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190417191805.28198-10-armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-04-09target/i386: Generate #UD for LOCK on a register incrementPeter Maydell
Fix a TCG crash due to attempting an atomic increment operation without having set up the address first. This is a similar case to that dealt with in commit e84fcd7f662a0d8198703, and we fix it in the same way. Fixes: https://bugs.launchpad.net/qemu/+bug/1807675 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20190328104750.25046-1-peter.maydell@linaro.org
2019-03-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Kconfig improvements (msi_nonbroken, imply for default PCI devices) * intel-iommu: sharing passthrough FlatViews (Peter) * Fix for SEV with VFIO (Brijesh) * Allow compilation without CONFIG_PARALLEL (Thomas) # gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (23 commits) virtio-vga: only enable for specific boards config-all-devices.mak: rebuild on reconfigure minikconf: fix parser typo intel-iommu: optimize nodmar memory regions test-announce-self: convert to qgraph hw/alpha/Kconfig: DP264 hardware requires e1000 network card hw/hppa/Kconfig: Dino board requires e1000 network card hw/sh4/Kconfig: r2d machine requires the rtl8139 network card hw/ppc/Kconfig: e500 based machines require virtio-net-pci device hw/ppc/Kconfig: Bamboo machine requires e1000 network card hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices hw/mips/Kconfig: Malta machine requires the pcnet network card hw/i386/Kconfig: enable devices that can be created by default hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI hw/isa/Kconfig: i82378 SuperIO requires PC speaker device prep: do not select I82374 hw/i386/Kconfig: PC uses I8257, not I82374 hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL target/i386: sev: Do not pin the ram device memory region memory: Fix the memory region type assignment order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/rdma/Makefile.objs # hw/riscv/sifive_plic.c
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-20i386: Disable OSPKE on CPU model definitionsEduardo Habkost
Currently, the Cascadelake-Server, Icelake-Client, and Icelake-Server are always generating the following warning: qemu-system-x86_64: warning: \ host doesn't support requested feature: CPUID.07H:ECX [bit 4] This happens because OSPKE was never returned by GET_SUPPORTED_CPUID or x86_cpu_get_supported_feature_word(). OSPKE is a runtime flag automatically set by the KVM module or by TCG code, was always cleared by x86_cpu_filter_features(), and was not supposed to appear on the CPU model table. Remove the OSPKE flag from the CPU model table entries, to avoid the bogus warning and avoid returning invalid feature data on query-cpu-* QMP commands. As OSPKE was always cleared by x86_cpu_filter_features(), this won't have any guest-visible impact. Include a test case that should detect the problem if we introduce a similar bug again. Fixes: c7a88b52f62b ("i386: Add new model of Cascadelake-Server") Fixes: 8a11c62da914 ("i386: Add new CPU model Icelake-{Server,Client}") Cc: Tao Xu <tao3.xu@intel.com> Cc: Robert Hoo <robert.hu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190319200515.14999-1-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-20i386: Make arch_capabilities migratableEduardo Habkost
Now that kvm_arch_get_supported_cpuid() will only return arch_capabilities if QEMU is able to initialize the MSR properly, we know that the feature is safely migratable. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190125220606.4864-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-20i386: kvm: Disable arch_capabilities if MSR can't be setEduardo Habkost
KVM has two bugs in the handling of MSR_IA32_ARCH_CAPABILITIES: 1) Linux commit commit 1eaafe91a0df ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported") makes GET_SUPPORTED_CPUID return arch_capabilities even if running on SVM. This makes "-cpu host,migratable=off" incorrectly expose arch_capabilities on CPUID on AMD hosts (where the MSR is not emulated by KVM). 2) KVM_GET_MSR_INDEX_LIST does not return MSR_IA32_ARCH_CAPABILITIES if the MSR is not supported by the host CPU. This makes QEMU not initialize the MSR properly at kvm_put_msrs() on those hosts. Work around both bugs on the QEMU side, by checking if the MSR was returned by KVM_GET_MSR_INDEX_LIST before returning the feature flag on kvm_arch_get_supported_cpuid(). This has the unfortunate side effect of making arch_capabilities unavailable on hosts without hardware support for the MSR until bug #2 is fixed on KVM, but I can't see another way to work around bug #1 without that side effect. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190125220606.4864-2-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-18target/i386: sev: Do not pin the ram device memory regionSingh, Brijesh
The RAM device presents a memory region that should be handled as an IO region and should not be pinned. In the case of the vfio-pci, RAM device represents a MMIO BAR and the memory region is not backed by pages hence KVM_MEMORY_ENCRYPT_REG_REGION fails to lock the memory range. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1667249 Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Message-Id: <20190204222322.26766-3-brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11i386: extended the cpuid_level when Intel PT is enabledLuwei Kang
Intel Processor Trace required CPUID[0x14] but the cpuid_level have no change when create a kvm guest with e.g. "-cpu qemu64,+intel-pt". Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Luwei Kang <luwei.kang@intel.com> Message-Id: <1548805979-12321-1-git-send-email-luwei.kang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11target-i386: add kvm stubs to user-mode emulatorsPaolo Bonzini
The CPUID code will call kvm_arch_get_supported_cpuid() and, even though it is undef kvm_enabled() so it never runs for user-mode emulators, sometimes clang will not optimize it out at -O0. That could be considered a compiler bug, however at -O0 we give it a pass and just add the stubs. Reported-by: Kamil Rytarowski <n54@gmx.com> Tested-by: Kamil Rytarowski <n54@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 02:34:36 +0000