aboutsummaryrefslogtreecommitdiff
path: root/target/i386/tcg/fpu_helper.c
AgeCommit message (Collapse)Author
2022-10-20target/i386: introduce function to set rounding mode from FPCW or MXCSR bitsPaolo Bonzini
VROUND, FSTCW and STMXCSR all have to perform the same conversion from x86 rounding modes to softfloat constants. Since the ISA is consistent on the meaning of the two-bit rounding modes, extract the common code into a wrapper for set_float_rounding_mode. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-18target/i386: move 3DNow to the new decoderPaolo Bonzini
This adds another kind of weirdness when you thought you had seen it all: an opcode byte that comes _after_ the address, not before. It's not worth adding a new X86_SPECIAL_* constant for it, but it's actually not unlike VCMP; so, forgive me for exploiting the similarity and just deciding to dispatch to the right gen_helper_* call in a single code generation function. In fact, the old decoder had a bug where s->rip_offset should have been set to 1 for 3DNow! instructions, and it's fixed now. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-18target/i386: implement XSAVE and XRSTOR of AVX registersPaolo Bonzini
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-18target/i386: Introduce 256-bit vector helpersPaolo Bonzini
The new implementation of SSE will cover AVX from the get go, because all the work for the helper functions is already done. We just need to build them. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-18target/i386: add AVX_EN hflagPaul Brook
Add a new hflag bit to determine whether AVX instructions are allowed Signed-off-by: Paul Brook <paul@nowt.org> Message-Id: <20220424220204.2493824-4-paul@nowt.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-11linux-user: i386/signal: support XSAVE/XRSTOR for signal frame fpstatePaolo Bonzini
Add support for saving/restoring extended save states when signals are delivered. This allows using AVX, MPX or PKRU registers in signal handlers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-26target/i386: Suppress coverity warning on fsave/frstorRichard Henderson
Coverity warns that 14 << data32 may overflow with respect to the target_ulong to which it is subsequently added. We know this wasn't true because data32 is in [1,2], but the suggested fix is perfectly fine. Fixes: Coverity CID 1487135, 1487256 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20220401184635.327423-1-richard.henderson@linaro.org>
2022-03-23target/i386: force maximum rounding precision for fildl[l]Alex Bennée
The instruction description says "It is loaded without rounding errors." which implies we should have the widest rounding mode possible. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/888 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220315121251.2280317-4-alex.bennee@linaro.org>
2021-07-13target/i386: Correct implementation for FCS, FIP, FDS and FDPZiqiao Kong
Update FCS:FIP and FDS:FDP according to the Intel Manual Vol.1 8.1.8. Note that CPUID.(EAX=07H,ECX=0H):EBX[bit 13] is not implemented by design in this patch and will be added along with TCG features flag in a separate patch later. Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com> Message-Id: <20210530150112.74411-2-ziqiaokong@gmail.com> [rth: Push FDS/FDP handling down into mod != 3 case; free last_addr.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-13target/i386: Split out do_fninitRichard Henderson
Do not call helper_fninit directly from helper_xrstor. Do call the new helper from do_fsave. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-06target/i386: Move X86XSaveArea into TCGDavid Edmondson
Given that TCG is now the only consumer of X86XSaveArea, move the structure definition and associated offset declarations and checks to a TCG specific header. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20210705104632.2902400-9-david.edmondson@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-03softfloat: Introduce Floatx80RoundPrecRichard Henderson
Use an enumeration instead of raw 32/64/80 values. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-10i386: separate fpu_helper sysemu-only partsClaudio Fontana
create a separate tcg/sysemu/fpu_helper.c for the sysemu-only parts. For user mode, some small #ifdefs remain in tcg/fpu_helper.c which do not seem worth splitting into their own user-mode module. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210322132800.7470-16-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-10target/i386: Split out do_fsave, do_frstor, do_fxsave, do_fxrstorRichard Henderson
The helper_* functions must use GETPC() to unwind from TCG. The cpu_x86_* functions cannot, and directly calling the helper_* functions is a bug. Split out new functions that perform the work and can be used by both. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Claudio Fontana <cfontana@suse.de> Tested-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210322132800.7470-4-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-10target/i386: Rename helper_fldt, helper_fsttRichard Henderson
Change the prefix from "helper" to "do". The former should be reserved for those functions that are called from TCG; the latter is in use within the file already for those functions that are called from the helper functions, adding a "retaddr" argument. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Claudio Fontana <cfontana@suse.de> Tested-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210322132800.7470-3-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-16i386: move TCG cpu class initialization to tcg/Claudio Fontana
to do this, we need to take code out of cpu.c and helper.c, and also move some prototypes from cpu.h, for code that is needed in tcg/xxx_helper.c, and which in turn is part of the callbacks registered by the class initialization. Therefore, do some shuffling of the parts of cpu.h that are only relevant for tcg/, and put them in tcg/helper-tcg.h For FT0 and similar macros, put them in tcg/fpu-helper.c since they are used only there. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201212155530.23098-8-cfontana@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-16i386: move TCG accel files into tcg/Claudio Fontana
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [claudio: moved cc_helper_template.h to tcg/ too] Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20201212155530.23098-6-cfontana@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>