| Age | Commit message (Collapse) | Author |
|---|
|
When a KVM_{GET,SET}_MSRS ioctl() fails, it is difficult to find
out which MSR caused the problem. Print an error message for
debugging, before we trigger the (ret == cpu->kvm_msr_buf->nmsrs)
assert.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309194634.28457-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some Intel CPUs are known to have a broken TSX implementation. A
microcode update from Intel disabled TSX on those CPUs, but
GET_SUPPORTED_CPUID might be reporting it as supported if the
hosts were not updated yet.
Manually fixup the GET_SUPPORTED_CPUID data to ensure we will
never enable TSX when running on those hosts.
Reference:
* glibc commit 2702856bf45c82cf8e69f2064f5aa15c0ceb6359:
https://sourceware.org/git/?p=glibc.git;a=commit;h=2702856bf45c82cf8e69f2064f5aa15c0ceb6359
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309181212.18864-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Migration from a 2.3.0 qemu results in a reboot on the receiving QEMU
due to a disagreement about SM (System management) interrupts.
2.3.0 didn't have much SMI support, but it did set CPU_INTERRUPT_SMI
and this gets into the migration stream, but on 2.3.0 it
never got delivered.
~2.4.0 SMI interrupt support was added but was broken - so
that when a 2.3.0 stream was received it cleared the CPU_INTERRUPT_SMI
but never actually caused an interrupt.
The SMI delivery was recently fixed by 68c6efe07a, but the
effect now is that an incoming 2.3.0 stream takes the interrupt it
had flagged but it's bios can't actually handle it(I think
partly due to the original interrupt not being taken during boot?).
The consequence is a triple(?) fault and a reboot.
Tested from:
2.3.1 -M 2.3.0
2.7.0 -M 2.3.0
2.8.0 -M 2.3.0
2.8.0 -M 2.8.0
This corresponds to RH bugzilla entry 1420679.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170223133441.16010-1-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread.
Information for the SIGBUS can be stored in thread-local variables
and processed later in kvm_cpu_exec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Build it on kvm_arch_on_sigbus_vcpu instead. They do the same
for "action optional" SIGBUSes, and the main thread should never get
"action required" SIGBUSes because it blocks the signal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the KVM "eat signals" code under CONFIG_LINUX, in preparation
for moving it to kvm-all.c; reraise non-MCE SIGBUS immediately,
without passing it to KVM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch should have no semantic change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This fixes timekeeping of x86-64 Darwin/OS X/macOS guests when using KVM.
Darwin/OS X/macOS for x86-64 uses the TSC for timekeeping; it normally calibrates this by querying various clock frequency scaling MSRs. Details depend on the exact CPU model detected. The local APIC timer frequency is extracted from (EFI) firmware.
This is problematic in the presence of virtualisation, as the MSRs in question are typically not handled by the hypervisor. VMWare (Fusion) advertises TSC and APIC frequency via a custom 0x40000010 CPUID leaf, in the eax and ebx registers respectively. This is documented at https://lwn.net/Articles/301888/ among other places.
Darwin/OS X/macOS looks for the generic 0x40000000 hypervisor leaf, and if this indicates via eax that leaf 0x40000010 might be available, that is in turn queried for the two frequencies.
This adds a CPU option "vmware-cpuid-freq" to enable the same behaviour when running Qemu with KVM acceleration, if the KVM TSC frequency can be determined, and it is stable. (invtsc or user-specified) The virtualised APIC bus cycle is hardcoded to 1GHz in KVM, so ebx of the CPUID leaf is also hardcoded to this value.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <1484921496-11257-2-git-send-email-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.
Add an errp parameter and a retcode return value to migrate_add_blocker.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged with recent 'Allow invtsc migration' change
|
|
We can safely allow a VM to be migrated with invtsc enabled if
tsc-khz is set explicitly, because:
* QEMU already refuses to start if it can't set the TSC frequency
to the configured value.
* Management software is already required to keep device
configuration (including CPU configuration) the same on
migration source and destination.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170108173234.25721-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Instead of searching the table we have just built, we can check
the env->features field directly.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170108173234.25721-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Check for KVM_CAP_ADJUST_CLOCK capability KVM_CLOCK_TSC_STABLE, which
indicates that KVM_GET_CLOCK returns a value as seen by the guest at
that moment.
For new machine types, use this value rather than reading
from guest memory.
This reduces kvmclock difference on migration from 5s to 0.1s
(when max_downtime == 5s).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20161121105052.598267440@redhat.com>
[Add comment explaining what is going on. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
