aboutsummaryrefslogtreecommitdiff
path: root/target/hppa
AgeCommit message (Collapse)Author
2019-03-15target/hppa: Avoid squishing DISAS_IAQ_N_STALE_EXITRichard Henderson
Within a delay slot, we were squishing both DISAS_IAQ_N_STALE and DISAS_IAQ_N_STALE_EXIT to DISAS_IAQ_N_UPDATED. This lost the required exit to the main loop, and could result in interrupts never being delivered. Tested-by: Sven Schnelle <svens@stackframe.org> Reported-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: exit TB if either Data or Instruction TLB changesSven Schnelle
The current code assumes that we don't need to exit the TB if a Data Cache Flush or Insert has happend. However, as we have a shared Data/Instruction TLB, a Data cache flush also flushes Instruction TLB entries, and a Data cache TLB insert might also evict a Instruction TLB entry. So exit the TB in all cases if Instruction translation is enabled. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-11-svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: add TLB protection id checkSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-10-svens@stackframe.org> [rth: Add required tlb flushing when prot id registers change.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: allow multiple itlbp without itlbaSven Schnelle
The ODE software calls itlbp on existing TLB entries without calling itlba first, so this seems to be valid. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-9-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: fix b,gate instructionSven Schnelle
b,gate does GR[t] ← cat(GR[t]{0..29},IAOQ_Front{30..31}); instead of saving the link address to register t. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-8-svens@stackframe.org> [rth: Move link check outside of ifndef CONFIG_USER_ONLY; use ctx->privilege; nullify the insn earlier.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: ignore DIAG opcodeSven Schnelle
DIAG is usually only used by diagnostics software as it's CPU specific. In most of the cases it's better to ignore it and log a message that it's not implemented. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-7-svens@stackframe.org> [rth: Free the nullify condition.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: remove PSW I/R/Q bit checkSven Schnelle
HP ODE use rfi to set the Q bit, and i don't see anything in the documentation that this is forbidden. So remove it. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-6-svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: add TLB trace eventsSven Schnelle
To ease TLB debugging add a few trace events, which are disabled by default so that there's no performance impact. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-5-svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: report ITLB_EXCP_MISS for ITLB missesSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-4-svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: fix TLB handling for page 0Sven Schnelle
Assume the following sequence: pitlbe r0(sr0,r0) iitlba r4,(sr0,r0) ldil L%3000000,r5 iitlbp r5,(sr0,r0) This will purge the whole TLB and add an entry for page 0. However the current TLB implementation in helper_iitlba() will store to the last empty TLB entry, while helper_iitlbp() will write to the first empty entry. That is because an empty entry will match address 0 in helper_iitlba() Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-3-svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: fix overwriting source reg in addbSven Schnelle
When one of the source registers is the same as the destination register, the source register gets overwritten with the destionation value before do_add_sv() is called, which leads to unexpection condition matches. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190311191602.25796-2-svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12target/hppa: Check for page crossings in use_goto_tbRichard Henderson
We got away with eliding this check when target/hppa was user-only, but missed adding this check when adding system support. Fixes an early crash in the HP-UX 11 installer. Reported-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-07target/hppa: Optimize blr r0,rnRichard Henderson
We can eliminate an extra TB in this case, which merely loads a "return address" into rn. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-07target/hppa: Do not return freed temporaryRichard Henderson
For priv levels 1 & 2, we were doing so from do_ibranch_priv. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: fix dcor instructionSven Schnelle
It looks like the operands where exchanged. HP bootrom tests the following sequence: 0x00000000f0004064: ldil L%-66666800,r7 0x00000000f0004068: addi 19f,r7,r7 0x00000000f000406c: addi -1,r0,rp 0x00000000f0004070: addi f,r0,r4 0x00000000f0004074: addi 1,r4,r5 0x00000000f0004078: dcor rp,r6 0x00000000f000407c: cmpb,<>,n r6,r7,0xf000411 This returned 0x66666661 instead of the expected 0x9999999f in QEMU. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190211181907.2219-6-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Fix addition '</<=' conditionsSven Schnelle
These conditions include the signed overflow bit. See page 5-3 of the Parisc 1.1 Architecture Reference Manual for details. Signed-off-by: Sven Schnelle <svens@stackframe.org> [rth: More changes for c == 3, to compute (N^V)|Z properly.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Rearrange log conditionsRichard Henderson
We will be fixing do_cond vs signed overflow, which requires that do_log_cond not rely on do_cond. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: move GETPC to HELPER() functionsSven Schnelle
When QEMU is compiled with -O0, these functions are inlined which will cause a wrong restart address generated for the TB. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190211181907.2219-2-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Merge translate_one into hppa_tr_translate_insnRichard Henderson
Now that the implementation is entirely within the generated decode function, eliminate the wrapper. Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert fp operate insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert fp fused multiply-add insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert halt/reset insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert fp indexed memory insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert offset memory insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert arithmetic immediate insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert direct and indirect branchesRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert shift, extract, deposit insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert conditional branchesRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert fp multiply-addRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert indexed memory insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert arithmetic/logical insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert memory management insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Unify specializations of ORRichard Henderson
With decodetree.py, the specializations would conflict so we must have a single entry point for all variants of OR. Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert remainder of system insnsRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Convert move to/from system registersRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Begin using scripts/decodetree.pyRichard Henderson
Convert the BREAK instruction to start. Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-12target/hppa: Use DisasContextBase.is_jmpRichard Henderson
Instead of returning DisasJumpType, immediately store it. Return true in preparation for conversion to the decodetree script. Tested-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-06target/hppa: fix PSW Q bit behaviour to match hardwareSven Schnelle
PA-RISC specification says: "Setting the PSW Q-bit, PSW{28}, to 1 with this instruction, if it was not already 1, is an undefined operation." However, at least HP-UX 10.20 sets the Q bit from 0 to 1 with the SSM instruction. Tested this both on HP9000/712 and HP9000/785/C3750, both machines set the Q bit from 0 to 1 without exception. This makes HP-UX 10.20 progress a little bit further. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190129191402.29539-1-svens@stackframe.org> [rth: Add a comment to the code as well.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-06target/hppa: fix setting registers via gdbSven Schnelle
While doing 'set $pcoqh=0xf0000000' i triggered the assertion below. The argument order for deposit64() is wrong, and val needs to be moved to the end. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20190128165333.3814-1-svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-06target/hppa: use tb_cflags() to access tb->cflagsEmilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1518663946-2326-1-git-send-email-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-11-27vmstate: constify VMStateFieldMarc-André Lureau
Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-16target/hppa: Raise exception 26 on emulated hardwareHelge Deller
On PCXS chips (PA7000, pa 1.1a), trap #18 is raised on memory faults, while all later chips (>= PA7100) generate either trap #26, #27 or #28 (depending on the fault type). Since the current qemu emulation emulates a B160L machine (with a PA7300LC PCX-L2 chip, we should raise trap #26 (EXCP_DMAR) instead of #18 (EXCP_DMP) on access faults by the Linux kernel to page zero. With the patch we now get the correct output (I tested against real hardware): Kernel Fault: Code=26 (Data memory access rights trap) instead of: Kernel Fault: Code=18 (Data memory protection/unaligned access trap) Signed-off-by: Helge Deller <deller@gmx.de> Message-Id: <20181007205153.GA30270@ls3530.fritz.box> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/rth/tags/tcg-next-pull-request' into ↵Peter Maydell
staging tcg-next queue # gpg: Signature made Sat 02 Jun 2018 00:12:42 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/tcg-next-pull-request: tcg: Pass tb and index to tcg_gen_exit_tb separately Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01tcg: Pass tb and index to tcg_gen_exit_tb separatelyRichard Henderson
Do the cast to uintptr_t within the helper, so that the compiler can type check the pointer argument. We can also do some more sanity checking of the index argument. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01target: Do not include "exec/exec-all.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/exec-all.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(cpu_address_space_init|cpu_loop_|tlb_|tb_|GETPC|singlestep|TranslationBlock)" | \ xargs sed -i.bak '/#include "exec\/exec-all.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-10-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31target/hppa: Include "qemu/log.h" to use qemu_log()Philippe Mathieu-Daudé
Since his inception in 61766fe9e2d, this file uses the qemu_log() API from "qemu/log.h". Include it to allow further includes cleanup. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-9-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-17fpu/softfloat: Specialize on snan_bit_is_oneRichard Henderson
Only MIPS requires snan_bit_is_one to be variable. While we are specializing softfloat behaviour, allow other targets to eliminate this runtime check. Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@mips.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17target/hppa: Remove floatX_maybe_silence_nan from conversionsRichard Henderson
This is now handled properly by the generic softfloat code. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09translator: merge max_insns into DisasContextBaseEmilio G. Cota
While at it, use int for both num_insns and max_insns to make sure we have same-type comparisons. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael Clark <mjc@sifive.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg: Improve TCGv_ptr supportRichard Henderson
Drop TCGV_PTR_TO_NAT and TCGV_NAT_TO_PTR internal macros. Add tcg_temp_local_new_ptr, tcg_gen_brcondi_ptr, tcg_gen_ext_i32_ptr, tcg_gen_trunc_i64_ptr, tcg_gen_extu_ptr_i64, tcg_gen_trunc_ptr_i32. Use inlines instead of macros where possible. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-02 14:59:20 +0000