aboutsummaryrefslogtreecommitdiff
path: root/target/hexagon/translate.c
AgeCommit message (Collapse)Author
2023-03-06Hexagon (target/hexagon) Improve code gen for predicated HVX instructionsTaylor Simpson
The following improvements are made for predicated HVX instructions During gen_commit_hvx, unconditionally move the "new" value into the dest Don't set slot_cancelled Remove runtime bookkeeping of which registers were updated Reduce the cases where gen_log_vreg_write[_pair] is called It's only needed for special operands VxxV and VyV Remove gen_log_qreg_write Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Anton Johansson <anjo@rev.ng> Message-Id: <20230307025828.1612809-15-tsimpson@quicinc.com>
2023-03-06Hexagon (target/hexagon) Reduce manipulation of slot_cancelledTaylor Simpson
We only need to track slot for predicated stores and predicated HVX instructions. Add arguments to the probe helper functions to indicate if the slot is predicated. Here is a simple example of the differences in the TCG code generated: IN: 0x00400094: 0xf900c102 { if (P0) R2 = and(R0,R1) } BEFORE ---- 00400094 mov_i32 slot_cancelled,$0x0 mov_i32 new_r2,r2 and_i32 tmp0,p0,$0x1 brcond_i32 tmp0,$0x0,eq,$L1 and_i32 tmp0,r0,r1 mov_i32 new_r2,tmp0 br $L2 set_label $L1 or_i32 slot_cancelled,slot_cancelled,$0x8 set_label $L2 mov_i32 r2,new_r2 AFTER ---- 00400094 mov_i32 new_r2,r2 and_i32 tmp0,p0,$0x1 brcond_i32 tmp0,$0x0,eq,$L1 and_i32 tmp0,r0,r1 mov_i32 new_r2,tmp0 br $L2 set_label $L1 set_label $L2 mov_i32 r2,new_r2 Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Anton Johansson <anjo@rev.ng> Message-Id: <20230307025828.1612809-14-tsimpson@quicinc.com>
2023-03-06Hexagon (target/hexagon) Analyze packet for HVXTaylor Simpson
Extend the analyze_<tag> functions for HVX vector and predicate writes Remove calls to ctx_log_vreg_write[_pair] from gen_tcg_funcs.py During gen_start_packet, reload the predicated HVX registers into fugure_VRegs and tmp_VRegs Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Anton Johansson <anjo@rev.ng> Message-Id: <20230307025828.1612809-8-tsimpson@quicinc.com>
2023-03-06Hexagon (target/hexagon) Don't set pkt_has_store_s1 when not neededTaylor Simpson
The pkt_has_store_s1 field in CPUHexagonState is only needed in generated helpers for scalar load instructions. See check_noshuf and mem_load[1248] in op_helper.c. We add logic in gen_analyze_funcs.py to set need_pkt_has_store_s1 in DisasContext when it is needed at runtime. Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Anton Johansson <anjo@rev.ng> Message-Id: <20230307025828.1612809-7-tsimpson@quicinc.com>
2023-03-06Hexagon (target/hexagon) Analyze packet before generating TCGTaylor Simpson
We create a new generator that creates an analyze_<tag> function for each instruction. Currently, these functions record the writes to R, P, and C registers by calling ctx_log_reg_write[_pair] or ctx_log_pred_write. During gen_start_packet, we invoke the analyze_<tag> function for each instruction in the packet, and we mark the implicit register and predicate writes. Doing the analysis up front has several advantages - We remove calls to ctx_log_* from gen_tcg_funcs.py and genptr.c - After the analysis is performed, we can initialize hex_new_value for each of the predicated assignments rather than during TCG generation for the instructions - This is a stepping stone for future work where the analysis will include the set of registers that are read. In cases where the packet doesn't have an overlap between the registers that are written and registers that are read, we can avoid the intermediate step of writing to hex_new_value. Note that other checks will also be needed (e.g., no instructions can raise an exception). Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Anton Johansson <anjo@rev.ng> Message-Id: <20230307025828.1612809-6-tsimpson@quicinc.com>
2023-03-05target/hexagon: Drop tcg_temp_free from C codeRichard Henderson
Translators are no longer required to free tcg temporaries. Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-01target/hexagon: Don't use tcg_temp_local_new_*Richard Henderson
Since tcg_temp_new_* is now identical, use those. Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-01accel/tcg: Pass max_insn to gen_intermediate_code by pointerRichard Henderson
In preparation for returning the number of insns generated via the same pointer. Adjust only the prototypes so far. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-12-16Hexagon (target/hexagon) Use direct block chaining for tight loopsTaylor Simpson
Direct block chaining is documented here https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining Hexagon inner loops end with the endloop0 instruction To go back to the beginning of the loop, this instructions writes to PC from register SA0 (start address 0). To use direct block chaining, we have to assign PC with a constant value. So, we specialize the code generation when the start of the translation block is equal to SA0. When this is the case, we defer the compare/branch from endloop0 to gen_end_tb. When this is done, we can assign the start address of the TB to PC. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20221108162906.3166-12-tsimpson@quicinc.com>
2022-12-16Hexagon (target/hexagon) Use direct block chaining for direct jump/branchTaylor Simpson
Direct block chaining is documented here https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining Recall that Hexagon allows packets with multiple jumps where only the first one with a true predicate will actually jump. We can use tcg_gen_goto_tb/tcg_gen_exit_tb when the packet contains a single PC-relative branch or jump. If not, we use tcg_gen_lookup_and_goto_ptr. We add the following to DisasContext in order to delay the branching until the end of packet commit (in gen_end_tb) branch_cond The TCGCond condition under which the branch is taken When branch_cond == TCG_COND_NEVER, there isn't a single direct branch in this packet. When branch_cond != TCG_COND_ALWAYS, the value is in hex_branch_taken branch_dest The destination of the branch Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20221108162906.3166-11-tsimpson@quicinc.com>
2022-12-16Hexagon (target/hexagon) Remove next_PC from runtime stateTaylor Simpson
The imported files don't properly mark all CONDEXEC instructions, so we add some logic to hex_common.py to add the attribute. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20221108162906.3166-7-tsimpson@quicinc.com>
2022-12-16Hexagon (target/hexagon) Remove PC from the runtime stateTaylor Simpson
Add pc field to Packet structure For helpers that need PC, pass an extra argument Remove slot arg from conditional jump helpers On a trap0, copy pkt->pc into hex_gpr[HEX_REG_PC] Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20221108162906.3166-6-tsimpson@quicinc.com>
2022-12-16Hexagon (target/hexagon) Only use branch_taken when packet has multi cofTaylor Simpson
When a packet has more than one change-of-flow instruction, only the first one to branch is considered. We use the branch_taken variable to keep track of this. However, when there is a single cof instruction, we don't need the same amount of bookkeeping. We add the pkt_has_multi_cof member to the Packet structure, and pass this information to the needed functions. When there is a generated helper function with cof, the generator will pass this pkt_has_multi_cof as a runtime value. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20221108162906.3166-5-tsimpson@quicinc.com>
2022-12-16Hexagon (target/hexagon) Add pkt and insn to DisasContextTaylor Simpson
This enables us to reduce the number of parameters to many functions In particular, the generated functions previously took all 3 as arguments Not only does this simplify the code, it improves the translation time Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20221108162906.3166-2-tsimpson@quicinc.com>
2022-09-30Hexagon (target/hexagon) move store size tracking to translationTaylor Simpson
The store width is needed for packet commit, so it is stored in ctx->store_width. Currently, it is set when a store has a TCG override instead of a QEMU helper. In the QEMU helper case, the ctx->store_width is not set, we invoke a helper during packet commit that uses the runtime store width. This patch ensures ctx->store_width is set for all store instructions, so performance is improved because packet commit can generate the proper TCG store rather than the generic helper. We do this by - Use the attributes from the instructions during translation to set ctx->store_width - Remove setting of ctx->store_width from genptr.c Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220920080746.26791-3-tsimpson@quicinc.com>
2022-09-30Hexagon (target/hexagon) Change decision to set pkt_has_store_s[01]Taylor Simpson
We have found cases where pkt_has_store_s[01] is set incorrectly. This leads to generating an unnecessary store that is left over from a previous packet. Add an attribute to determine if an instruction is a scalar store The attribute is attached to the fSTORE macro (hex_common.py) Update the logic in decode.c that sets pkt_has_store_s[01] Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220920080746.26791-4-tsimpson@quicinc.com>
2022-09-06accel/tcg: Add pc and host_pc params to gen_intermediate_codeRichard Henderson
Pass these along to translator_loop -- pc may be used instead of tb->pc, and host_pc is currently unused. Adjust all targets at one time. Acked-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-04-20exec/translator: Pass the locked filepointer to disas_log hookRichard Henderson
We have fetched and locked the logfile in translator_loop. Pass the filepointer down to the disas_log hook so that it need not be fetched and locked again. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
2022-04-20target/hexagon: Remove qemu_set_log in hexagon_translate_initRichard Henderson
This code appears to be trying to make sure there is a logfile. But that's already true -- the logfile will either be set by -D, or will be stderr. In either case, not appropriate here. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-3-richard.henderson@linaro.org>
2021-11-03Hexagon HVX (target/hexagon) TCG generationTaylor Simpson
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
2021-10-28Hexagon (target/hexagon) put writes to USR into temp until commitTaylor Simpson
Change SET_USR_FIELD to write to hex_new_value[HEX_REG_USR] instead of hex_gpr[HEX_REG_USR]. Then, we need code to mark the instructions that can set implicitly set USR - Macros added to hex_common.py - A_FPOP added in translate.c Test case added in tests/tcg/hexagon/overflow.c Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
2021-10-28Hexagon (target/hexagon) more tcg_constant_*Taylor Simpson
Change additional tcg_const_tl to tcg_constant_tl Note that gen_pred_cancal had slot_mask initialized with tcg_const_tl. However, it is not constant throughout, so we initialize it with tcg_temp_new and replace the first use with the constant value. Inspired-by: Richard Henderson <richard.henderson@linaro.org> Inspired-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
2021-10-15target/hexagon: Drop checks for singlestep_enabledRichard Henderson
GDB single-stepping is now handled generically. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-06target/hexagon: Use tcg_constant_*Philippe Mathieu-Daudé
Replace uses of tcg_const_* with the allocate and free close together. Inspired-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20211003004750.3608983-3-f4bug@amsat.org>
2021-10-06Hexagon (target/hexagon) probe the stores in a packet at start of commitTaylor Simpson
When a packet has 2 stores, either both commit or neither commit. At the beginning of gen_commit_packet, we check for multiple stores. If there are multiple stores, call a helper that will probe each of them before proceeding with the commit. Note that we don't call the probe helper for packets with only one store. Therefore, we call process_store_log before anything else involved in committing the packet. We also fix a typo in the comment in process_store_log. Test case added in tests/tcg/hexagon/hex_sigsegv.c Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <1633036599-7637-1-git-send-email-tsimpson@quicinc.com>
2021-09-14accel/tcg: Add DisasContextBase argument to translator_ld*Ilya Leoshkevich
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> [rth: Split out of a larger patch.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Remove TranslatorOps.breakpoint_checkRichard Henderson
The hook is now unused, with breakpoints checked outside translation. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-29Hexagon (target/hexagon) remove unused TCG variablesTaylor Simpson
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1622589584-22571-5-git-send-email-tsimpson@quicinc.com>
2021-05-01Hexagon (target/hexagon) compile all debug codeTaylor Simpson
Change #if HEX_DEBUG to if (HEX_DEBUG) so the debug code doesn't bit rot Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1617930474-31979-17-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-01Hexagon (target/hexagon) change variables from int to bool when appropriateTaylor Simpson
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1617930474-31979-8-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-01Hexagon (target/hexagon) decide if pred has been written at TCG gen timeTaylor Simpson
Multiple writes to the same preg are and'ed together. Rather than generating a runtime check, we can determine at TCG generation time if the predicate has previously been written in the packet. Test added to tests/tcg/hexagon/misc.c Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1617930474-31979-7-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-01Hexagon (target/hexagon) properly generate TB end for DISAS_NORETURNTaylor Simpson
When exiting a TB, generate all the code before returning from hexagon_tr_translate_packet so that nothing needs to be done in hexagon_tr_tb_stop. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1617930474-31979-6-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-01Hexagon (target/hexagon) use env_archcpu and env_cpuTaylor Simpson
Remove hexagon_env_get_cpu and replace with env_archcpu Replace CPU(hexagon_env_get_cpu(env)) with env_cpu(env) Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1617930474-31979-5-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-01Hexagon (target/hexagon) remove unnecessary inline directivesTaylor Simpson
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1617930474-31979-4-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-01target/hexagon: translation changesTaylor Simpson
Change cpu_ldl_code to translator_ldl. Don't end the TB after every packet when HEX_DEBUG is on. Make gen_check_store_width a simple call. Reported-by: Richard Henderson <<richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <1615783984-25918-1-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-18Hexagon (target/hexagon) translationTaylor Simpson
Read the instruction memory Create a packet data structure Generate TCG code for the start of the packet Invoke the generate function for each instruction Generate TCG code for the end of the packet Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <1612763186-18161-30-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-18 05:45:40 +0000