aboutsummaryrefslogtreecommitdiff
path: root/target/arm
AgeCommit message (Collapse)Author
2020-05-14target/arm: Convert Neon 3-reg-same VQRDMLAH/VQRDMLSH to decodetreePeter Maydell
Convert the Neon VQRDMLAH and VQRDMLSH insns in the 3-reg-same group to decodetree. These don't use do_3same() because they want to operate on VFP double registers, whose offsets are different from the neon_reg_offset() calculations do_3same does. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200512163904.10918-2-peter.maydell@linaro.org
2020-05-14target-arm: kvm64: handle SIGBUS signal from kernel or KVMDongjiu Geng
Add a SIGBUS signal handler. In this handler, it checks the SIGBUS type, translates the host VA delivered by host to guest PA, then fills this PA to guest APEI GHES memory, then notifies guest according to the SIGBUS type. When guest accesses the poisoned memory, it will generate a Synchronous External Abort(SEA). Then host kernel gets an APEI notification and calls memory_failure() to unmapped the affected page in stage 2, finally returns to guest. Guest continues to access the PG_hwpoison page, it will trap to KVM as stage2 fault, then a SIGBUS_MCEERR_AR synchronous signal is delivered to Qemu, Qemu records this error address into guest APEI GHES memory and notifes guest using Synchronous-External-Abort(SEA). In order to inject a vSEA, we introduce the kvm_inject_arm_sea() function in which we can setup the type of exception and the syndrome information. When switching to guest, the target vcpu will jump to the synchronous external abort vector table entry. The ESR_ELx.DFSC is set to synchronous external abort(0x10), and the ESR_ELx.FnV is set to not valid(0x1), which will tell guest that FAR is not valid and hold an UNKNOWN value. These values will be set to KVM register structures through KVM_SET_ONE_REG IOCTL. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200512030609.19593-10-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Vectorize SABA/UABARichard Henderson
Include 64-bit element size in preparation for SVE2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Vectorize SABD/UABDRichard Henderson
Include 64-bit element size in preparation for SVE2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Clear tail in gvec_fmul_idx_*, gvec_fmla_idx_*Richard Henderson
Must clear the tail for AdvSIMD when SVE is enabled. Fixes: ca40a6e6e39 Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Pass pointer to qc to qrdmla/qrdmlsRichard Henderson
Pass a pointer directly to env->vfp.qc[0], rather than env. This will allow SVE2, which does not modify QC, to pass a pointer to dummy storage. Change the return type of inl_qrdml.h_s16 to match the sense of the operation: signed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Create gen_gvec_{qrdmla,qrdmls}Richard Henderson
Provide a functional interface for the vector expansion. This fits better with the existing set of helpers that we provide for other operations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Remove fp_status from helper_{recpe, rsqrte}_u32Richard Henderson
These operations do not touch fp_status. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Create gen_gvec_{uqadd, sqadd, uqsub, sqsub}Richard Henderson
Provide a functional interface for the vector expansion. This fits better with the existing set of helpers that we provide for other operations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Create gen_gvec_{cmtst,ushl,sshl}Richard Henderson
Provide a functional interface for the vector expansion. This fits better with the existing set of helpers that we provide for other operations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Swap argument order for VSHL during decodeRichard Henderson
Rather than perform the argument swap during code generation, perform it during decode. This means it doesn't have to be special cased later, and we can share code with aarch64 code generation. Hopefully the decode comment addresses any confusion that might arise in between. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Create gen_gvec_{mla,mls}Richard Henderson
Provide a functional interface for the vector expansion. This fits better with the existing set of helpers that we provide for other operations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Create gen_gvec_{ceq,clt,cle,cgt,cge}0Richard Henderson
Provide a functional interface for the vector expansion. This fits better with the existing set of helpers that we provide for other operations. Macro-ize the 5 nearly identical comparisons. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Tidy handle_vec_simd_shriRichard Henderson
Now that we've converted all cases to gvec, there is quite a bit of dead code at the end of the function. Remove it. Sink the call to gen_gvec_fn2i to the end, loading a function pointer within the switch statement. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Remove unnecessary range check for VSHLRichard Henderson
In 1dc8425e551, while converting to gvec, I added an extra range check against the shift count. This was unnecessary because the encoding of the shift count produces 0 to the element size - 1. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Create gen_gvec_{sri,sli}Richard Henderson
The functions eliminate duplication of the special cases for this operation. They match up with the GVecGen2iFn typedef. Add out-of-line helpers. We got away with only having inline expanders because the neon vector size is only 16 bytes, and we know that the inline expansion will always succeed. When we reuse this for SVE, tcg-gvec-op may decide to use an out-of-line helper due to longer vector lengths. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Create gen_gvec_{u,s}{rshr,rsra}Richard Henderson
Create vectorized versions of handle_shri_with_rndacc for shift+round and shift+round+accumulate. Add out-of-line helpers in preparation for longer vector lengths from SVE. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Create gen_gvec_[us]sraRichard Henderson
The functions eliminate duplication of the special cases for this operation. They match up with the GVecGen2iFn typedef. Add out-of-line helpers. We got away with only having inline expanders because the neon vector size is only 16 bytes, and we know that the inline expansion will always succeed. When we reuse this for SVE, tcg-gvec-op may decide to use an out-of-line helper due to longer vector lengths. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200513163245.17915-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14target/arm: Use correct GDB XML for M-profile coresPeter Maydell
GDB's remote protocol requires M-profile cores to use the feature name 'org.gnu.gdb.arm.m-profile' instead of the 'org.gnu.gdb.arm.core' feature used for A- and R-profile cores. We weren't doing this, which meant GDB treated our M-profile cores like A-profile ones. This mostly doesn't matter, but for instance means that it doesn't correctly handle backtraces where an M-profile exception frame is involved. Ship a copy of GDB's arm-m-profile.xml and use it on the M-profile cores. The integer registers have the same offsets as the arm-core.xml, but register 25 is the M-profile XPSR rather than the A-profile CPSR, so we need to update arm_cpu_gdb_read_register() and arm_cpu_gdb_write_register() to handle XSPR reads and writes. Fixes: https://bugs.launchpad.net/qemu/+bug/1877136 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200507134755.13997-1-peter.maydell@linaro.org
2020-05-11target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed)Richard Henderson
DUP (indexed) can duplicate 128-bit elements, so using esz unconditionally can assert in tcg_gen_gvec_dup_imm. Fixes: 8711e71f9cbb Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20200507172352.15418-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Use tcg_gen_gvec_5_ptr for sve FMLA/FCMLARichard Henderson
Now that we can pass 7 parameters, do not encode register operands within simd_data. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200507172352.15418-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Restrict TCG cpus to TCG accelPhilippe Mathieu-Daudé
A KVM-only build won't be able to run TCG cpus. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200504172448.9402-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm/cpu: Restrict v8M IDAU interface to Aarch32 CPUsPhilippe Mathieu-Daudé
As IDAU is a v8M feature, restrict it to the Aarch32 CPUs. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200504172448.9402-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]Philippe Mathieu-Daudé
Use ARRAY_SIZE() to iterate over ARMCPUInfo[]. Since on the aarch64-linux-user build, arm_cpus[] is empty, add the cpu_count variable and only iterate when it is non-zero. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200504172448.9402-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Make set_feature() available for other filesThomas Huth
Move the common set_feature() and unset_feature() functions from cpu.c and cpu64.c to cpu.h. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200504172448.9402-3-philmd@redhat.com Message-ID: <20190921150420.30743-2-thuth@redhat.com> [PMD: Split Thomas's patch in two: set_feature, cpu_register] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm/kvm: Inline set_feature() callsPhilippe Mathieu-Daudé
We want to move the inlined declarations of set_feature() from cpu*.c to cpu.h. To avoid clashing with the KVM declarations, inline the few KVM calls. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200504172448.9402-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Remove sve_memopidxRichard Henderson
None of the sve helpers use TCGMemOpIdx any longer, so we can stop passing it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Reuse sve_probe_page for gather loadsRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Reuse sve_probe_page for scatter storesRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Reuse sve_probe_page for gather first-fault loadsRichard Henderson
This avoids the need for a separate set of helpers to implement no-fault semantics, and will enable MTE in the future. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Use SVEContLdSt for contiguous storesRichard Henderson
Follow the model set up for contiguous loads. This handles watchpoints correctly for contiguous stores, recognizing the exception before any changes to memory. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Update contiguous first-fault and no-fault loadsRichard Henderson
With sve_cont_ldst_pages, the differences between first-fault and no-fault are minimal, so unify the routines. With cpu_probe_watchpoint, we are able to make progress through pages with TLB_WATCHPOINT set when the watchpoint does not actually fire. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Use SVEContLdSt for multi-register contiguous loadsRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Handle watchpoints in sve_ld1_rRichard Henderson
Handle all of the watchpoints for active elements all at once, before we've modified the vector register. This removes the TLB_WATCHPOINT bit from page[].flags, which means that we can use the normal fast path via RAM. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Use SVEContLdSt in sve_ld1_rRichard Henderson
First use of the new helper functions, so we can remove the unused markup. No longer need a scratch for user-only, as we completely probe the page set before reading; system mode still requires a scratch for MMIO. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Adjust interface of sve_ld1_host_fnRichard Henderson
The current interface includes a loop; change it to load a single element. We will then be able to use the function for ld{2,3,4} where individual vector elements are not adjacent. Replace each call with the simplest possible loop over active elements. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Add sve infrastructure for page lookupRichard Henderson
For contiguous predicated memory operations, we want to minimize the number of tlb lookups performed. We have open-coded this for sve_ld1_r, but for correctness with MTE we will need this for all of the memory operations. Create a structure that holds the bounds of active elements, and metadata for two pages. Add routines to find those active elements, lookup the pages, and run watchpoints for those pages. Temporarily mark the functions unused to avoid Werror. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Drop manual handling of set/clear_helper_retaddrRichard Henderson
Since we converted back to cpu_*_data_ra, we do not need to do this ourselves. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fnRichard Henderson
Use the "normal" memory access functions, rather than the softmmu internal helper functions directly. Since fb901c905dc3, cpu_mem_index is now a simple extract from env->hflags and not a large computation. Which means that it's now more work to pass around this value than it is to recompute it. This only adjusts the primitives, and does not clean up all of the uses within sve_helper.c. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11target/arm: Drop access_el3_aa32ns_aa64any()Edgar E. Iglesias
Calling access_el3_aa32ns() works for AArch32 only cores but it does not handle 32-bit EL2 on top of 64-bit EL3 for mixed 32/64-bit cores. Merge access_el3_aa32ns_aa64any() into access_el3_aa32ns() and only use the latter. Fixes: 68e9c2fe65 ("target-arm: Add VTCR_EL2") Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200505141729.31930-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-06target/arm: Use tcg_gen_gvec_dup_immRichard Henderson
In a few cases, we're able to remove some manual replication. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-04target/arm: Move gen_ function typedefs to translate.hPeter Maydell
We're going to want at least some of the NeonGen* typedefs for the refactored 32-bit Neon decoder, so move them all to translate.h since it makes more sense to keep them in one group. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200430181003.21682-23-peter.maydell@linaro.org
2020-05-04target/arm: Convert Neon 3-reg-same VMUL, VMLA, VMLS, VSHL to decodetreePeter Maydell
Convert the Neon VMUL, VMLA, VMLS and VSHL insns in the 3-reg-same grouping to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200430181003.21682-20-peter.maydell@linaro.org
2020-05-04target/arm: Convert Neon 3-reg-same VQADD/VQSUB to decodetreePeter Maydell
Convert the Neon VQADD/VQSUB insns in the 3-reg-same grouping to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200430181003.21682-19-peter.maydell@linaro.org
2020-05-04target/arm: Convert Neon 3-reg-same comparisons to decodetreePeter Maydell
Convert the Neon comparison ops in the 3-reg-same grouping to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200430181003.21682-18-peter.maydell@linaro.org
2020-05-04target/arm: Convert Neon 3-reg-same VMAX/VMIN to decodetreePeter Maydell
Convert the Neon 3-reg-same VMAX and VMIN insns to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200430181003.21682-17-peter.maydell@linaro.org
2020-05-04target/arm: Convert Neon 3-reg-same logic ops to decodetreePeter Maydell
Convert the Neon logic ops in the 3-reg-same grouping to decodetree. Note that for the logic ops the 'size' field forms part of their decode and the actual operations are always bitwise. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200430181003.21682-16-peter.maydell@linaro.org
2020-05-04target/arm: Convert Neon 3-reg-same VADD/VSUB to decodetreePeter Maydell
Convert the Neon 3-reg-same VADD and VSUB insns to decodetree. Note that we don't need the neon_3r_sizes[op] check here because all size values are OK for VADD and VSUB; we'll add this when we convert the first insn that has size restrictions. For this we need one of the GVecGen*Fn typedefs currently in translate-a64.h; move them all to translate.h as a block so they are visible to the 32-bit decoder. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200430181003.21682-15-peter.maydell@linaro.org
2020-05-04target/arm: Convert Neon 'load/store single structure' to decodetreePeter Maydell
Convert the Neon "load/store single structure to one lane" insns to decodetree. As this is the last set of insns in the neon load/store group, we can remove the whole disas_neon_ls_insn() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200430181003.21682-14-peter.maydell@linaro.org
2020-05-04target/arm: Convert Neon 'load single structure to all lanes' to decodetreePeter Maydell
Convert the Neon "load single structure to all lanes" insns to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200430181003.21682-13-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-21 09:02:58 +0000