| Age | Commit message (Collapse) | Author |
|---|
|
Like FEAT_TRF (Self-hosted Trace Extension), suppress tracing
external to the cpu, which is out of scope for QEMU.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
There is only one additional EL1 register modeled, which
also needs to use access_actlr_w.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Access to many of the special registers is enabled or disabled
by ACTLR_EL[23], which we implement as constant 0, which means
that all writes outside EL3 should trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Do not hard-code the constants for Neoverse V1.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When the cpu support MTE, but the system does not, reduce cpu
support to user instructions at EL0 instead of completely
disabling MTE. If we encounter a cpu implementation which does
something else, we can revisit this setting.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Support all of the easy GM block sizes.
Use direct memory operations, since the pointers are aligned.
While BS=2 (16 bytes, 1 tag) is a legal setting, that requires
an atomic store of one nibble. This is not difficult, but there
is also no point in supporting it until required.
Note that cortex-a710 sets GM blocksize to match its cacheline
size of 64 bytes. I expect many implementations will also
match the cacheline, which makes 16 bytes very unlikely.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Previously we hard-coded the blocksize with GMID_EL1_BS.
But the value we choose for -cpu max does not match the
value that cortex-a710 uses.
Mirror the way we handle dcz_blocksize.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230811214031.171020-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This value is only 4 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230811214031.171020-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Try and make the self reported global hack a little less hackish by
providing a query function instead. As gdb_has_xml was always set if
we negotiated XML we can now use the presence of ->target_xml as the
test instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-12-alex.bennee@linaro.org>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Changes the signature of the target-defined functions for
inserting/removing hvf hw breakpoints. The address and length arguments
are now of vaddr type, which both matches the type used internally in
accel/hvf/hvf-all.c and makes the api target-agnostic.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-5-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Changes the signature of the target-defined functions for
inserting/removing kvm hw breakpoints. The address and length arguments
are now of vaddr type, which both matches the type used internally in
accel/kvm/kvm-all.c and makes the api target-agnostic.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Typo applied byte-wise shift instead of double-word shift.
Cc: qemu-stable@nongnu.org
Fixes: 631e565450c ("target/arm: Create gen_gvec_[us]sra")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1737
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230821022025.397682-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
A typo, noted in the bug report, resulting in an
incorrect write offset.
Cc: qemu-stable@nongnu.org
Fixes: 7390e0e9ab8 ("target/arm: Implement SME LD1, ST1")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1833
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230818214255.146905-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When FEAT_RME is implemented, these bits override the value of
CNT[VP]_CTL_EL0.IMASK in Realm and Root state. Move the IRQ state update
into a new gt_update_irq() function and test those bits every time we
recompute the IRQ state.
Since we're removing the IRQ state from some trace events, add a new
trace event for gt_update_irq().
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230809123706.1842548-7-jean-philippe@linaro.org
[PMM: only register change hook if not USER_ONLY and if TCG]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The AT instruction is UNDEFINED if the {NSE,NS} configuration is
invalid. Add a function to check this on all AT instructions that apply
to an EL lower than 3.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230809123706.1842548-6-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
At the moment we only handle Secure and Nonsecure security spaces for
the AT instructions. Add support for Realm and Root.
For AArch64, arm_security_space() gives the desired space. ARM DDI0487J
says (R_NYXTL):
If EL3 is implemented, then when an address translation instruction
that applies to an Exception level lower than EL3 is executed, the
Effective value of SCR_EL3.{NSE, NS} determines the target Security
state that the instruction applies to.
For AArch32, some instructions can access NonSecure space from Secure,
so we still need to pass the state explicitly to do_ats_write().
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230809123706.1842548-5-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
GPC checks are not performed on the output address for AT instructions,
as stated by ARM DDI 0487J in D8.12.2:
When populating PAR_EL1 with the result of an address translation
instruction, granule protection checks are not performed on the final
output address of a successful translation.
Rename get_phys_addr_with_secure(), since it's only used to handle AT
instructions.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230809123706.1842548-4-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When HCR_EL2.E2H is enabled, TLB entries are formed using the EL2&0
translation regime, instead of the EL2 translation regime. The TLB VAE2*
instructions invalidate the regime that corresponds to the current value
of HCR_EL2.E2H.
At the moment we only invalidate the EL2 translation regime. This causes
problems with RMM, which issues TLBI VAE2IS instructions with
HCR_EL2.E2H enabled. Update vae2_tlbmask() to take HCR_EL2.E2H into
account.
Add vae2_tlbbits() as well, since the top-byte-ignore configuration is
different between the EL2&0 and EL2 regime.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230809123706.1842548-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In realm state, stage-2 translation tables are fetched from the realm
physical address space (R_PGRQD).
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230809123706.1842548-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The PAR_EL1.SH field documents that for the cases of:
* Device memory
* Normal memory with both Inner and Outer Non-Cacheable
the field should be 0b10 rather than whatever was in the
translation table descriptor field. (In the pseudocode this
is handled by PAREncodeShareability().) Perform this
adjustment when assembling a PAR value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-16-peter.maydell@linaro.org
|
|
When we report faults due to stage 2 faults during a stage 1
page table walk, the 'level' parameter should be the level
of the walk in stage 2 that faulted, not the level of the
walk in stage 1. Correct the reporting of these faults.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-15-peter.maydell@linaro.org
|
|
The architecture doesn't permit block descriptors at any arbitrary
level of the page table walk; it depends on the granule size which
levels are permitted. We implemented only a partial version of this
check which assumes that block descriptors are valid at all levels
except level 3, which meant that we wouldn't deliver the Translation
fault for all cases of this sort of guest page table error.
Implement the logic corresponding to the pseudocode
AArch64.DecodeDescriptorType() and AArch64.BlockDescSupported().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-14-peter.maydell@linaro.org
|
|
When the MMU is disabled, data accesses should be Device nGnRnE,
Outer Shareable, Untagged. We handle the other cases from
AArch64.S1DisabledOutput() correctly but missed this one.
Device nGnRnE is memattr == 0, so the only part we were missing
was that shareability should be set to 2 for both insn fetches
and data accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-13-peter.maydell@linaro.org
|
|
We only use S1Translate::out_secure in two places, where we are
setting up MemTxAttrs for a page table load. We can use
arm_space_is_secure(ptw->out_space) instead, which guarantees
that we're setting the MemTxAttrs secure and space fields
consistently, and allows us to drop the out_secure field in
S1Translate entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-12-peter.maydell@linaro.org
|
|
We no longer look at the in_secure field of the S1Translate struct
anyway, so we can remove it and all the code which sets it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-11-peter.maydell@linaro.org
|
|
Replace the last uses of ptw->in_secure with appropriate
checks on ptw->in_space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-10-peter.maydell@linaro.org
|
|
When we do a translation in Secure state, the NSTable bits in table
descriptors may downgrade us to NonSecure; we update ptw->in_secure
and ptw->in_space accordingly. We guard that check correctly with a
conditional that means it's only applied for Secure stage 1
translations. However, later on in get_phys_addr_lpae() we fold the
effects of the NSTable bits into the final descriptor attributes
bits, and there we do it unconditionally regardless of the CPU state.
That means that in Realm state (where in_secure is false) we will set
bit 5 in attrs, and later use it to decide to output to non-secure
space.
We don't in fact need to do this folding in at all any more (since
commit 2f1ff4e7b9f30c): if an NSTable bit was set then we have
already set ptw->in_space to ARMSS_NonSecure, and in that situation
we don't look at attrs bit 5. The only thing we still need to deal
with is the real NS bit in the final descriptor word, so we can just
drop the code that ORed in the NSTable bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-9-peter.maydell@linaro.org
|
|
Pass an ARMSecuritySpace instead of a bool secure to
arm_is_el2_enabled_secstate(). This doesn't change behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-8-peter.maydell@linaro.org
|
|
arm_hcr_el2_eff_secstate() takes a bool secure, which it uses to
determine whether EL2 is enabled in the current security state.
With the advent of FEAT_RME this is no longer sufficient, because
EL2 can be enabled for Secure state but not for Root, and both
of those will pass 'secure == true' in the callsites in ptw.c.
As it happens in all of our callsites in ptw.c we either avoid making
the call or else avoid using the returned value if we're doing a
translation for Root, so this is not a behaviour change even if the
experimental FEAT_RME is enabled. But it is less confusing in the
ptw.c code if we avoid the use of a bool secure that duplicates some
of the information in the ArmSecuritySpace argument.
Make arm_hcr_el2_eff_secstate() take an ARMSecuritySpace argument
instead. Because we always want to know the HCR_EL2 for the
security state defined by the current effective value of
SCR_EL3.{NSE,NS}, it makes no sense to pass ARMSS_Root here,
and we assert that callers don't do that.
To avoid the assert(), we thus push the call to
arm_hcr_el2_eff_secstate() down into the cases in
regime_translation_disabled() that need it, rather than calling the
function and ignoring the result for the Root space translations.
All other calls to this function in ptw.c are already in places
where we have confirmed that the mmu_idx is a stage 2 translation
or that the regime EL is not 3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-7-peter.maydell@linaro.org
|
|
Plumb the ARMSecurityState through to regime_translation_disabled()
rather than just a bool is_secure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-6-peter.maydell@linaro.org
|
|
In commit 6d2654ffacea813916176 we created the S1Translate struct and
used it to plumb through various arguments that we were previously
passing one-at-a-time to get_phys_addr_v5(), get_phys_addr_v6(), and
get_phys_addr_lpae(). Extend that pattern to get_phys_addr_pmsav5(),
get_phys_addr_pmsav7(), get_phys_addr_pmsav8() and
get_phys_addr_disabled(), so that all the get_phys_addr_* functions
we call from get_phys_addr_nogpc() take the S1Translate struct rather
than the mmu_idx and is_secure bool.
(This refactoring is a prelude to having the called functions look
at ptw->is_space rather than using an is_secure boolean.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-5-peter.maydell@linaro.org
|
|
The s1ns bit in ARMMMUFaultInfo is documented as "true if
we faulted on a non-secure IPA while in secure state". Both the
places which look at this bit only do so after having confirmed
that this is a stage 2 fault and we're dealing with Secure EL2,
which leaves the ptw.c code free to set the bit to any random
value in the other cases.
Instead of taking advantage of that freedom, consistently
make the bit be set to false for the "not a stage 2 fault
for Secure EL2" cases. This removes some cases where we
were using an 'is_secure' boolean and leaving the reader
guessing about whether that was the right thing for Realm
and Root cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-4-peter.maydell@linaro.org
|
|
In S1_ptw_translate() we set up the ARMMMUFaultInfo if the attempt to
translate the page descriptor address into a physical address fails.
This used to only be possible if we are doing a stage 2 ptw for that
descriptor address, and so the code always sets fi->stage2 and
fi->s1ptw to true. However, with FEAT_RME it is also possible for
the lookup of the page descriptor address to fail because of a
Granule Protection Check fault. These should not be reported as
stage 2, otherwise arm_deliver_fault() will incorrectly set
HPFAR_EL2. Similarly the s1ptw bit should only be set for stage 2
faults on stage 1 translation table walks, i.e. not for GPC faults.
Add a comment to the the other place where we might detect a
stage2-fault-on-stage-1-ptw, in arm_casq_ptw(), noting why we know in
that case that it must really be a stage 2 fault and not a GPC fault.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-3-peter.maydell@linaro.org
|
|
For an Unsupported Atomic Update fault where the stage 1 translation
table descriptor update can't be done because it's to an unsupported
memory type, this is a stage 1 abort (per the Arm ARM R_VSXXT). This
means we should not set fi->s1ptw, because this will cause the code
in the get_phys_addr_lpae() error-exit path to mark it as stage 2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807141514.19075-2-peter.maydell@linaro.org
|
|
Before this change, the default KVM type, which is used for non-virt
machine models, was 0.
The kernel documentation says:
> On arm64, the physical address size for a VM (IPA Size limit) is
> limited to 40bits by default. The limit can be configured if the host
> supports the extension KVM_CAP_ARM_VM_IPA_SIZE. When supported, use
> KVM_VM_TYPE_ARM_IPA_SIZE(IPA_Bits) to set the size in the machine type
> identifier, where IPA_Bits is the maximum width of any physical
> address used by the VM. The IPA_Bits is encoded in bits[7-0] of the
> machine type identifier.
>
> e.g, to configure a guest to use 48bit physical address size::
>
> vm_fd = ioctl(dev_fd, KVM_CREATE_VM, KVM_VM_TYPE_ARM_IPA_SIZE(48));
>
> The requested size (IPA_Bits) must be:
>
> == =========================================================
> 0 Implies default size, 40bits (for backward compatibility)
> N Implies N bits, where N is a positive integer such that,
> 32 <= N <= Host_IPA_Limit
> == =========================================================
> Host_IPA_Limit is the maximum possible value for IPA_Bits on the host
> and is dependent on the CPU capability and the kernel configuration.
> The limit can be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the
> KVM_CHECK_EXTENSION ioctl() at run-time.
>
> Creation of the VM will fail if the requested IPA size (whether it is
> implicit or explicit) is unsupported on the host.
https://docs.kernel.org/virt/kvm/api.html#kvm-create-vm
So if Host_IPA_Limit < 40, specifying 0 as the type will fail. This
actually confused libvirt, which uses "none" machine model to probe the
KVM availability, on M2 MacBook Air.
Fix this by using Host_IPA_Limit as the default type when
KVM_CAP_ARM_VM_IPA_SIZE is available.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-3-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model, which is used by libvirt to probe the availability of
KVM.
For MIPS, the existing mips_kvm_type() is reused. This function ensures
the availability of VZ which is mandatory to use KVM on the current
QEMU.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-2-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added doc comment for new function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Currently we list all the Arm decodetree files together and add them
unconditionally to arm_ss. This means we build them for both
qemu-system-aarch64 and qemu-system-arm. However, some of them are
AArch64-specific, so there is no need to build them for
qemu-system-arm. (Meson is smart enough to notice that the generated
.c.inc file is not used by any objects that go into qemu-system-arm,
so we only unnecessarily run decodetree, not anything more
heavyweight like a recompile or relink, but it's still unnecessary
work.)
Split gen into gen_a32 and gen_a64, and only add gen_a64 for
TARGET_AARCH64 compiles.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230718104628.1137734-1-peter.maydell@linaro.org
|
|
In commit 0b188ea05acb5 we changed the implementation of
trans_CSEL() to use tcg_constant_i32(). However, this change
was incorrect, because the implementation of the function
sets up the TCGv_i32 rn and rm to be either zero or else
a TCG temp created in load_reg(), and these TCG temps are
then in both cases written to by the emitted TCG ops.
The result is that we hit a TCG assertion:
qemu-system-arm: ../../tcg/tcg.c:4455: tcg_reg_alloc_mov: Assertion `!temp_readonly(ots)' failed.
(or on a non-debug build, just produce a garbage result)
Adjust the code so that rn and rm are always writeable
temporaries whether the instruction is using the special
case "0" or a normal register as input.
Cc: qemu-stable@nongnu.org
Fixes: 0b188ea05acb5 ("target/arm: Use tcg_constant in trans_CSEL")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230727103906.2641264-1-peter.maydell@linaro.org
|
|
When converting to decodetree, the code to rebuild mop for the pair
only made it into trans_STP and not into trans_STGP.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1790
Fixes: 8c212eb6594 ("target/arm: Convert load/store-pair to decodetree")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230726165416.309624-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
trivial-patches 25-07-2023
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmS/2vgPHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5ZT6MH/j5L3P9yLV6TqW+DkhCppbmBygqxz2SbQjwl
# dVVfSLpJNbtpvLfEnvpb+ms+ZdaOCGj8IofAVf9w0VaIYJFP1srFphY/1x+RYVnw
# kDjCLzuLNSCAdCV2HPqsrMKzdFctZ/MfK+QzfcGik9IvmCNPYWOhpmevs+xAIEJd
# b0xk152zy2fIIC3vKK+3KcM7MFkqZWJ6z0pzUZAyEBS+aQyuZNPJ/cO8xMXotbP2
# jqv12SNGV2GLH1acvsd8GQwDB9MamstB4r8NWpSpT/AyPwOgmMR+j5B8a/WEBJCs
# OcEW/pEyrumSygqf9z01YoNJQUCSvSpg5aq4+S2cRDslmUgFDmw=
# =wCoQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Jul 2023 15:23:52 BST
# gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@debian.org>" [full]
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu:
qapi: Correct "eg." to "e.g." in documentation
hw/pci: add comment to explain checking for available function 0 in pci hotplug
target/tricore: Rename tricore_feature
hw/9pfs: spelling fixes
other architectures: spelling fixes
arm: spelling fixes
s390x: spelling fixes
migration: spelling fixes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
A lot of the code called from helper_exception_bkpt_insn() is written
assuming A-profile, but we will also call this helper on M-profile
CPUs when they execute a BKPT insn. This used to work by accident,
but recent changes mean that we will hit an assert when some of this
code calls down into lower level functions that end up calling
arm_security_space_below_el3(), arm_el_is_aa64(), and other functions
that now explicitly assert that the guest CPU is not M-profile.
Handle M-profile directly to avoid the assertions:
* in arm_debug_target_el(), M-profile debug exceptions always
go to EL1
* in arm_debug_exception_fsr(), M-profile always uses the short
format FSR (compare commit d7fe699be54b2, though in this case
the code in arm_v7m_cpu_do_interrupt() does not need to
look at the FSR value at all)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1775
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230721143239.1753066-1-peter.maydell@linaro.org
|
|
In get_phys_addr_twostage() the code that applies the effects of
VSTCR.{SA,SW} and VTCR.{NSA,NSW} only updates result->f.attrs.secure.
Now we also have f.attrs.space for FEAT_RME, we need to keep the two
in sync.
These bits only have an effect for Secure space translations, not
for Root, so use the input in_space field to determine whether to
apply them rather than the input is_secure. This doesn't actually
make a difference because Root translations are never two-stage,
but it's a little clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230710152130.3928330-4-peter.maydell@linaro.org
|
|
In commit fe4a5472ccd6 we rearranged the logic in S1_ptw_translate()
so that the debug-access "call get_phys_addr_*" codepath is used both
when S1 is doing ptw reads from stage 2 and when it is doing ptw
reads from physical memory. However, we didn't update the
calculation of s2ptw->in_space and s2ptw->in_secure to account for
the "ptw reads from physical memory" case. This meant that debug
accesses when in Secure state broke.
Create a new function S2_security_space() which returns the
correct security space to use for the ptw load, and use it to
determine the correct .in_secure and .in_space fields for the
stage 2 lookup for the ptw load.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230710152130.3928330-3-peter.maydell@linaro.org
Fixes: fe4a5472ccd6 ("target/arm: Use get_phys_addr_with_struct in S1_ptw_translate")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add comments to the in_* fields in the S1Translate struct
that explain what they're doing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230710152130.3928330-2-peter.maydell@linaro.org
|
|
This implements the AESIMC instruction. We have converted everything
to crypto/aes-round.h; crypto/aes.h is no longer needed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This implements the AESMC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This implements the AESD instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This implements the AESE instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
