| Age | Commit message (Collapse) | Author |
|---|
|
Convert the load and store instructions which use a 9-bit
immediate offset to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-13-peter.maydell@linaro.org
|
|
Convert the load/store register pair insns (LDP, STP,
LDNP, STNP, LDPSW, STGP) to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230602155223.2040685-12-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Convert the "Load register (literal)" instruction class to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-11-peter.maydell@linaro.org
|
|
Convert the load/store exclusive pair (LDXP, STXP, LDAXP, STLXP),
compare-and-swap pair (CASP, CASPA, CASPAL, CASPL), and compare-and
swap (CAS, CASA, CASAL, CASL) instructions to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-10-peter.maydell@linaro.org
|
|
Convert the instructions in the load/store exclusive (STXR,
STLXR, LDXR, LDAXR) and load/store ordered (STLR, STLLR,
LDAR, LDLAR) to decodetree.
Note that for STLR, STLLR, LDAR, LDLAR this fixes an under-decoding
in the legacy decoder where we were not checking that the RES1 bits
in the Rs and Rt2 fields were set.
The new function ldst_iss_sf() is equivalent to the existing
disas_ldst_compute_iss_sf(), but it takes the pre-decoded 'ext' field
rather than taking an undecoded two-bit opc field and extracting
'ext' from it. Once all the loads and stores have been converted
to decodetree disas_ldst_compute_iss_sf() will be unused and
can be deleted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-9-peter.maydell@linaro.org
|
|
Convert the exception generation instructions SVC, HVC, SMC, BRK and
HLT to decodetree.
The old decoder decoded the halting-debug insnns DCPS1, DCPS2 and
DCPS3 just in order to then make them UNDEF; as with DRPS, we don't
bother to decode them, but document the patterns in a64.decode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-8-peter.maydell@linaro.org
|
|
Convert MSR (reg), MRS, SYS, SYSL to decodetree. For QEMU these are
all essentially the same instruction (system register access).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-7-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Convert the MSR (immediate) insn to decodetree. Our implementation
has basically no commonality between the different destinations,
so we decode the destination register in a64.decode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-6-peter.maydell@linaro.org
|
|
Convert the CFINV, XAFLAG and AXFLAG insns to decodetree.
The old decoder handles these in handle_msr_i(), but
the architecture defines them as separate instructions
from MSR (immediate).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-5-peter.maydell@linaro.org
|
|
Convert the insns in the "Barriers" instruction class to
decodetree: CLREX, DSB, DMB, ISB and SB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-4-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Convert the various instructions in the hint instruction space
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-3-peter.maydell@linaro.org
|
|
In the recent refactoring we missed a few places which should be
calling finalize_memop_asimd() for ASIMD loads and stores but
instead are just calling finalize_memop(); fix these.
For the disas_ldst_single_struct() and disas_ldst_multiple_struct()
cases, this is not a behaviour change because there the size
is never MO_128 and the two finalize functions do the same thing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
In disas_ldst_reg_imm9() we missed one place where a call to
a gen_mte_check* function should now be passed the memop we
have created rather than just being passed the size. Fix this.
Fixes: 0a9091424d ("target/arm: Pass memop to gen_mte_check1*")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
The LDG instruction loads the tag from a memory address (identified
by [Xn + offset]), and then merges that tag into the destination
register Xt. We implemented this correctly for the case when
allocation tags are enabled, but didn't get it right when ATA=0:
instead of merging the tag bits into Xt, we merged them into the
memory address [Xn + offset] and then set Xt to that.
Merge the tag bits into the old Xt value, as they should be.
Cc: qemu-stable@nongnu.org
Fixes: c15294c1e36a7dd9b25 ("target/arm: Implement LDG, STG, ST2G instructions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The atomic memory operations are supposed to return the old memory
data value in the destination register. This value is not
sign-extended, even if the operation is the signed minimum or
maximum. (In the pseudocode for the instructions the returned data
value is passed to ZeroExtend() to create the value in the register.)
We got this wrong because we were doing a 32-to-64 zero extend on the
result for 8 and 16 bit data values, rather than the correct amount
of zero extension.
Fix the bug by using ext8u and ext16u for the MO_8 and MO_16 data
sizes rather than ext32u.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-2-peter.maydell@linaro.org
|
|
Cortex A7 CPUs with an FPU implementing VFPv4 without NEON support
have 16 64-bit FPU registers and not 32 registers. Let users set the
number of VFP registers with a CPU property.
The primary use case of this property is for the Cortex A7 of the
Aspeed AST2600 SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Fixes the build for --disable-tcg.
This header is only needed for cross-hosting. Without CONFIG_TCG,
we know this is an AArch64 host, CONFIG_ATOMIC64 will be set, and
the TCG_OVERSIZED_GUEST block will never be compiled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Support gdbstub (guest debug) in HVF
* xnlx-versal: Support CANFD controller
* bpim2u: New board model: Banana Pi BPI-M2 Ultra
* Emulate FEAT_LSE2
* allow DC CVA[D]P in user mode emulation
* trap DCC access in user mode emulation
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmR/AKUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jzIEACNepQGY44yPhrEG+wD4WAB
# fH670KI33HcsFd2rGsC369gcssQbRIW/29reOzNhRMuol+kHI6OFaONpuKSdO0Rz
# TLVIsnT2Uq8KwbYfLtDQt5knj027amPy75d4re8wIK1eZB4dOIHysqAvQrJYeync
# 9obKku8xXGLwZh/mYHoVgHcZU0cPJO9nri39n1tV3JUBsgmqEURjzbZrMcF+yMX7
# bUzOYQvC1Iedmo+aWfx43u82AlNQFz1lsqmnQj7Z5rvv0HT+BRF5WzVMP0qRh5+Z
# njkqmBH9xb9kkgeHmeMvHpWox+J+obeSmVg/4gDNlJpThmpuU0Vr7EXUN3MBQlV9
# lhyy6zrTwC/BToiQqdT2dnpao9FzXy5exfnqi/py5IuqfjAzSO+p61LlPPZ4cJri
# pCK4yq2gzQXYfrlZkUJipvRMH8Xa4IdQx+w7lXrQoJdduF4/+6aJW/GAWSu0e7eC
# zgBwaJjI7ENce8ixJnuEFUxUnaBo8dl72a0PGA1UU8PL+cJNOIpyhPk4goWQprdn
# iFF4ZnjhBRZ2gk/4HGD9u5Vo2lNqP93YS5QhkGkF+HJsBmcOZgidIUpfHhPQvvHO
# Np196T2cAETCWGV1xG4CaTpxN2ndRReq3C0/mzfhIbwhXEACtvAiSlO4KB8t6pJj
# MzinCABXHcovJbGbxZ9j6w==
# =8SdN
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Jun 2023 02:47:17 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20230606' of https://git.linaro.org/people/pmaydell/qemu-arm: (42 commits)
target/arm: trap DCC access in user mode emulation
tests/tcg/aarch64: add DC CVA[D]P tests
target/arm: allow DC CVA[D]P in user mode emulation
target/arm: Enable FEAT_LSE2 for -cpu max
tests/tcg/multiarch: Adjust sigbus.c
tests/tcg/aarch64: Use stz2g in mte-7.c
target/arm: Move mte check for store-exclusive
target/arm: Relax ordered/atomic alignment checks for LSE2
target/arm: Add SCTLR.nAA to TBFLAG_A64
target/arm: Check alignment in helper_mte_check
target/arm: Pass single_memop to gen_mte_checkN
target/arm: Pass memop to gen_mte_check1*
target/arm: Hoist finalize_memop out of do_fp_{ld, st}
target/arm: Hoist finalize_memop out of do_gpr_{ld, st}
target/arm: Load/store integer pair with one tcg operation
target/arm: Sink gen_mte_check1 into load/store_exclusive
target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r
target/arm: Use tcg_gen_qemu_st_i128 for STZG, STZ2G
target/arm: Use tcg_gen_qemu_{st, ld}_i128 for do_fp_{st, ld}
target/arm: Use tcg_gen_qemu_ld_i128 for LDXP
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Accessing EL0-accessible Debug Communication Channel (DCC) registers in
user mode emulation is currently enabled. However, it does not match
Linux behavior as Linux sets MDSCR_EL1.TDCC on startup to disable EL0
access to DCC (see __cpu_setup() in arch/arm64/mm/proc.S).
This patch fixes access_tdcc() to check MDSCR_EL1.TDCC for EL0 and sets
MDSCR_EL1.TDCC for user mode emulation to match Linux.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: DS7PR12MB630905198DD8E69F6817544CAC4EA@DS7PR12MB6309.namprd12.prod.outlook.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
DC CVAP and DC CVADP instructions can be executed in EL0 on Linux,
either directly when SCTLR_EL1.UCI == 1 or emulated by the kernel (see
user_cache_maint_handler() in arch/arm64/kernel/traps.c).
This patch enables execution of the two instructions in user mode
emulation.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Push the mte check behind the exclusive_addr check.
Document the several ways that we are still out of spec
with this implementation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
FEAT_LSE2 only requires that atomic operations not cross a
16-byte boundary. Ordered operations may be completely
unaligned if SCTLR.nAA is set.
Because this alignment check is so special, do it by hand.
Make sure not to keep TCG temps live across the branch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fixes a bug in that with SCTLR.A set, we should raise any
alignment fault before raising any MTE check fault.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Pass the individual memop to gen_mte_checkN.
For the moment, do nothing with it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Pass the completed memop to gen_mte_check1_mmuidx.
For the moment, do nothing more than extract the size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This is required for LSE2, where the pair must be treated atomically if
it does not cross a 16-byte boundary. But it simplifies the code to do
this always.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
No need to duplicate this check across multiple call sites.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Round len_align to 16 instead of 8, handling an odd 8-byte as part
of the tail. Use MO_ATOM_NONE to indicate that all of these memory
ops have only byte atomicity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This fixes a bug in that these two insns should have been using atomic
16-byte stores, since MTE is ARMv8.5 and LSE2 is mandatory from ARMv8.4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
While we don't require 16-byte atomicity here, using a single larger
operation simplifies the code. Introduce finalize_memop_asimd for this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
While we don't require 16-byte atomicity here, using a single larger
load simplifies the code, and makes it a closer match to STXP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Let finalize_memop_atom be the new basic function, with
finalize_memop and finalize_memop_pair testing FEAT_LSE2
to apply the appropriate atomicity.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Document the meaning of exclusive_high in a big-endian context,
and why we can't change it now.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Guests can now be debugged through the gdbstub. Support is added for
single-stepping, software breakpoints, hardware breakpoints and
watchpoints. The code has been structured like the KVM counterpart.
While guest debugging is enabled, the guest can still read and write the
DBG*_EL1 registers but they don't have any effect.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-5-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Required for guest debugging. The code has been structured like the KVM
counterpart.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-4-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Required for guest debugging.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-3-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
These helpers will be also used for HVF. Aside from reformatting a
couple of comments for 'checkpatch.pl' and updating meson to compile
'hyp_gdbstub.c', this is just code motion.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230601153107.81955-2-fcagnin@quarkslab.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This had been pulled in via exec/translator.h,
but the include of exec-all.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Move most includes from *translate*.c to translate.h, ensuring
that we get the ordering correct. Ensure cpu.h is first.
Use disas/disas.h instead of exec/log.h.
Drop otherwise unused includes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Create helper-proto-common.h without the target specific portion.
Use that in tcg-op-common.h. Include helper-proto.h in target/arm
and target/hexagon before helper-info.c.inc; all other targets are
already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Create helper-gen-common.h without the target specific portion.
Use that in tcg-op-common.h. Reorg headers in target/arm to
ensure that helper-gen.h is included before helper-info.c.inc.
All other targets are already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This had been included via tcg-op-common.h via tcg-op.h,
but that is going away.
It is needed for inlines within translator.h, so we might as well
do it there and not individually in each translator c file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
