aboutsummaryrefslogtreecommitdiff
path: root/target/arm
AgeCommit message (Collapse)Author
2023-10-03target/arm: Remove size and alignment for cpu subclassesRichard Henderson
Inherit the size and alignment from TYPE_ARM_CPU. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-03target/arm: Replace TARGET_PAGE_ENTRY_EXTRAAnton Johansson
TARGET_PAGE_ENTRY_EXTRA is a macro that allows guests to specify additional fields for caching with the full TLB entry. This macro is replaced with a union in CPUTLBEntryFull, thus making CPUTLB target-agnostic at the cost of slightly inflated CPUTLBEntryFull for non-arm guests. Note, this is needed to ensure that fields in CPUTLB don't vary in offset between various targets. (arm is the only guest actually making use of this feature.) Signed-off-by: Anton Johansson <anjo@rev.ng> Message-Id: <20230912153428.17816-2-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-29target/arm/hvf: Clean up local variable shadowingPhilippe Mathieu-Daudé
Per Peter Maydell analysis [*]: The hvf_vcpu_exec() function is not documented, but in practice its caller expects it to return either EXCP_DEBUG (for "this was a guest debug exception you need to deal with") or something else (presumably the intention being 0 for OK). The hvf_sysreg_read() and hvf_sysreg_write() functions are also not documented, but they return 0 on success, or 1 for a completely unrecognized sysreg where we've raised the UNDEF exception (but not if we raised an UNDEF exception for an unrecognized GIC sysreg -- I think this is a bug). We use this return value to decide whether we need to advance the PC past the insn or not. It's not the same as the return value we want to return from hvf_vcpu_exec(). Retain the variable as locally scoped but give it a name that doesn't clash with the other function-scoped variable. This fixes: target/arm/hvf/hvf.c:1936:13: error: declaration shadows a local variable [-Werror,-Wshadow] int ret = 0; ^ target/arm/hvf/hvf.c:1807:9: note: previous declaration is here int ret; ^ [*] https://lore.kernel.org/qemu-devel/CAFEAcA_e+fU6JKtS+W63wr9cCJ6btu_hT_ydZWOwC0kBkDYYYQ@mail.gmail.com/ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20230904161235.84651-4-philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2023-09-29target/arm/tcg: Clean up local variable shadowingPhilippe Mathieu-Daudé
Fix: target/arm/tcg/translate-m-nocp.c: In function ‘gen_M_fp_sysreg_read’: target/arm/tcg/translate-m-nocp.c:509:18: warning: declaration of ‘tmp’ shadows a previous local [-Wshadow=compatible-local] 509 | TCGv_i32 tmp = load_cpu_field(v7m.fpdscr[M_REG_NS]); | ^~~ target/arm/tcg/translate-m-nocp.c:433:14: note: shadowed declaration is here 433 | TCGv_i32 tmp; | ^~~ --- target/arm/tcg/mve_helper.c: In function ‘helper_mve_vqshlsb’: target/arm/tcg/mve_helper.c:1259:19: warning: declaration of ‘r’ shadows a previous local [-Wshadow=compatible-local] 1259 | typeof(N) r = FN(N, (int8_t)(M), sizeof(N) * 8, ROUND, &su32); \ | ^ target/arm/tcg/mve_helper.c:1267:5: note: in expansion of macro ‘WRAP_QRSHL_HELPER’ 1267 | WRAP_QRSHL_HELPER(do_sqrshl_bhs, N, M, false, satp) | ^~~~~~~~~~~~~~~~~ target/arm/tcg/mve_helper.c:927:22: note: in expansion of macro ‘DO_SQSHL_OP’ 927 | TYPE r = FN(n[H##ESIZE(e)], m[H##ESIZE(e)], &sat); \ | ^~ target/arm/tcg/mve_helper.c:945:5: note: in expansion of macro ‘DO_2OP_SAT’ 945 | DO_2OP_SAT(OP##b, 1, int8_t, FN) \ | ^~~~~~~~~~ target/arm/tcg/mve_helper.c:1277:1: note: in expansion of macro ‘DO_2OP_SAT_S’ 1277 | DO_2OP_SAT_S(vqshls, DO_SQSHL_OP) | ^~~~~~~~~~~~ --- target/arm/tcg/mve_helper.c: In function ‘do_sqrshl48_d’: target/arm/tcg/mve_helper.c:2463:17: warning: declaration of ‘extval’ shadows a previous local [-Wshadow=compatible-local] 2463 | int64_t extval = sextract64(src << shift, 0, 48); | ^~~~~~ target/arm/tcg/mve_helper.c:2443:18: note: shadowed declaration is here 2443 | int64_t val, extval; | ^~~~~~ --- target/arm/tcg/mve_helper.c: In function ‘do_uqrshl48_d’: target/arm/tcg/mve_helper.c:2495:18: warning: declaration of ‘extval’ shadows a previous local [-Wshadow=compatible-local] 2495 | uint64_t extval = extract64(src << shift, 0, 48); | ^~~~~~ target/arm/tcg/mve_helper.c:2479:19: note: shadowed declaration is here 2479 | uint64_t val, extval; | ^~~~~~ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20230904161235.84651-3-philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2023-09-21target/arm: Enable FEAT_MOPS for CPU 'max'Peter Maydell
Enable FEAT_MOPS on the AArch64 'max' CPU, and add it to the list of features we implement. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-13-peter.maydell@linaro.org
2023-09-21target/arm: Implement the CPY* instructionsPeter Maydell
The FEAT_MOPS CPY* instructions implement memory copies. These come in both "always forwards" (memcpy-style) and "overlap OK" (memmove-style) flavours. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-12-peter.maydell@linaro.org
2023-09-21target/arm: Implement MTE tag-checking functions for FEAT_MOPS copiesPeter Maydell
The FEAT_MOPS memory copy operations need an extra helper routine for checking for MTE tag checking failures beyond the ones we already added for memory set operations: * mte_mops_probe_rev() does the same job as mte_mops_probe(), but it checks tags starting at the provided address and working backwards, rather than forwards Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-11-peter.maydell@linaro.org
2023-09-21target/arm: Implement the SETG* instructionsPeter Maydell
The FEAT_MOPS SETG* instructions are very similar to the SET* instructions, but as well as setting memory contents they also set the MTE tags. They are architecturally required to operate on tag-granule aligned regions only. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-10-peter.maydell@linaro.org
2023-09-21target/arm: Define new TB flag for ATA0Peter Maydell
Currently the only tag-setting instructions always do so in the context of the current EL, and so we only need one ATA bit in the TB flags. The FEAT_MOPS SETG instructions include ones which set tags for a non-privileged access, so we now also need the equivalent "are tags enabled?" information for EL0. Add the new TB flag, and convert the existing 'bool ata' field in DisasContext to a 'bool ata[2]' that can be indexed by the is_unpriv bit in an instruction, similarly to mte[2]. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-9-peter.maydell@linaro.org
2023-09-21target/arm: Implement the SET* instructionsPeter Maydell
Implement the SET* instructions which collectively implement a "memset" operation. These come in a set of three, eg SETP (prologue), SETM (main), SETE (epilogue), and each of those has different flavours to indicate whether memory accesses should be unpriv or non-temporal. This commit does not include the "memset with tag setting" SETG* instructions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-8-peter.maydell@linaro.org
2023-09-21target/arm: Implement MTE tag-checking functions for FEAT_MOPSPeter Maydell
The FEAT_MOPS instructions need a couple of helper routines that check for MTE tag failures: * mte_mops_probe() checks whether there is going to be a tag error in the next up-to-a-page worth of data * mte_check_fail() is an existing function to record the fact of a tag failure, which we need to make global so we can call it from helper-a64.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-7-peter.maydell@linaro.org
2023-09-21target/arm: New function allocation_tag_mem_probe()Peter Maydell
For the FEAT_MOPS operations, the existing allocation_tag_mem() function almost does what we want, but it will take a watchpoint exception even for an ra == 0 probe request, and it requires that the caller guarantee that the memory is accessible. For FEAT_MOPS we want a function that will not take any kind of exception, and will return NULL for the not-accessible case. Rename allocation_tag_mem() to allocation_tag_mem_probe() and add an extra 'probe' argument that lets us distinguish these cases; allocation_tag_mem() is now a wrapper that always passes 'false'. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-6-peter.maydell@linaro.org
2023-09-21target/arm: Define syndrome function for MOPS exceptionsPeter Maydell
The FEAT_MOPS memory operations can raise a Memory Copy or Memory Set exception if a copy or set instruction is executed when the CPU register state is not correct for that instruction. Define the usual syn_* function that constructs the syndrome register value for these exceptions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-5-peter.maydell@linaro.org
2023-09-21target/arm: Pass unpriv bool to get_a64_user_mem_index()Peter Maydell
In every place that we call the get_a64_user_mem_index() function we do it like this: memidx = a->unpriv ? get_a64_user_mem_index(s) : get_mem_index(s); Refactor so the caller passes in the bool that says whether they want the 'unpriv' or 'normal' mem_index rather than having to do the ?: themselves. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230912140434.1333369-4-peter.maydell@linaro.org
2023-09-21target/arm: Implement FEAT_MOPS enable bitsPeter Maydell
FEAT_MOPS defines a handful of new enable bits: * HCRX_EL2.MSCEn, SCTLR_EL1.MSCEn, SCTLR_EL2.MSCen: define whether the new insns should UNDEF or not * HCRX_EL2.MCE2: defines whether memops exceptions from EL1 should be taken to EL1 or EL2 Since we don't sanitise what bits can be written for the SCTLR registers, we only need to handle the new bits in HCRX_EL2, and define SCTLR_MSCEN for the new SCTLR bit value. The precedence of "HCRX bits acts as 0 if SCR_EL3.HXEn is 0" versus "bit acts as 1 if EL2 disabled" is not clear from the register definition text, but it is clear in the CheckMOPSEnabled() pseudocode(), so we follow that. We'll have to check whether other bits we need to implement in future follow the same logic or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-3-peter.maydell@linaro.org
2023-09-21target/arm: Don't skip MTE checks for LDRT/STRT at EL0Peter Maydell
The LDRT/STRT "unprivileged load/store" instructions behave like normal ones if executed at EL0. We handle this correctly for the load/store semantics, but get the MTE checking wrong. We always look at s->mte_active[is_unpriv] to see whether we should be doing MTE checks, but in hflags.c when we set the TB flags that will be used to fill the mte_active[] array we only set the MTE0_ACTIVE bit if UNPRIV is true (i.e. we are not at EL0). This means that a LDRT at EL0 will see s->mte_active[1] as 0, and will not do MTE checks even when MTE is enabled. To avoid the translate-time code having to do an explicit check on s->unpriv to see if it is OK to index into the mte_active[] array, duplicate MTE_ACTIVE into MTE0_ACTIVE when UNPRIV is false. (This isn't a very serious bug because generally nobody executes LDRT/STRT at EL0, because they have no use there.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230912140434.1333369-2-peter.maydell@linaro.org
2023-09-21target/arm: Remove unused allocation_tag_mem() argumentPeter Maydell
The allocation_tag_mem() function takes an argument tag_size, but it never uses it. Remove the argument. In mte_probe_int() in particular this also lets us delete the code computing the value we were passing in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-09-21target/arm: Implement FEAT_HBCPeter Maydell
FEAT_HBC (Hinted conditional branches) provides a new instruction BC.cond, which behaves exactly like the existing B.cond except that it provides a hint to the branch predictor about the likely behaviour of the branch. Since QEMU does not implement branch prediction, we can treat this identically to B.cond. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-21target/arm: Update user-mode ID reg mask valuesPeter Maydell
For user-only mode we reveal a subset of the AArch64 ID registers to the guest, to emulate the kernel's trap-and-emulate-ID-regs handling. Update the feature bit masks to match upstream kernel commit a48fa7efaf1161c1c. None of these features are yet implemented by QEMU, so this doesn't yet have a behavioural change, but implementation of FEAT_MOPS and FEAT_HBC is imminent. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-21target/arm: Update AArch64 ID register field definitionsPeter Maydell
Update our AArch64 ID register field definitions from the 2023-06 system register XML release: https://developer.arm.com/documentation/ddi0601/2023-06/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-19Merge tag 'pull-tcg-20230915-2' of https://gitlab.com/rth7680/qemu into stagingStefan Hajnoczi
*: Delete checks for old host definitions tcg/loongarch64: Generate LSX instructions fpu: Add conversions between bfloat16 and [u]int8 fpu: Handle m68k extended precision denormals properly accel/tcg: Improve cputlb i/o organization accel/tcg: Simplify tlb_plugin_lookup accel/tcg: Remove false-negative halted assertion tcg: Add gvec compare with immediate and scalar operand tcg/aarch64: Emit BTI insns at jump landing pads [Resolved conflict between CPUINFO_PMULL and CPUINFO_BTI. --Stefan] * tag 'pull-tcg-20230915-2' of https://gitlab.com/rth7680/qemu: (39 commits) tcg: Map code_gen_buffer with PROT_BTI tcg/aarch64: Emit BTI insns at jump landing pads util/cpuinfo-aarch64: Add CPUINFO_BTI tcg: Add tcg_out_tb_start backend hook fpu: Handle m68k extended precision denormals properly fpu: Add conversions between bfloat16 and [u]int8 accel/tcg: Introduce do_st16_mmio_leN accel/tcg: Introduce do_ld16_mmio_beN accel/tcg: Merge io_writex into do_st_mmio_leN accel/tcg: Merge io_readx into do_ld_mmio_beN accel/tcg: Replace direct use of io_readx/io_writex in do_{ld,st}_1 accel/tcg: Merge cpu_transaction_failed into io_failed plugin: Simplify struct qemu_plugin_hwaddr accel/tcg: Use CPUTLBEntryFull.phys_addr in io_failed accel/tcg: Split out io_prepare and io_failed accel/tcg: Simplify tlb_plugin_lookup target/arm: Use tcg_gen_gvec_cmpi for compare vs 0 tcg: Add gvec compare with immediate and scalar operand tcg/loongarch64: Implement 128-bit load & store tcg/loongarch64: Lower rotli_vec to vrotri ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-09-16target/arm: Use tcg_gen_gvec_cmpi for compare vs 0Richard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230831030904.1194667-3-richard.henderson@linaro.org>
2023-09-15target/arm: Use clmul_64Richard Henderson
Use generic routine for 64-bit carry-less multiply. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-15target/arm: Use clmul_32* routinesRichard Henderson
Use generic routines for 32-bit carry-less multiply. Remove our local version of pmull_d. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-15target/arm: Use clmul_16* routinesRichard Henderson
Use generic routines for 16-bit carry-less multiply. Remove our local version of pmull_w. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-15target/arm: Use clmul_8* routinesRichard Henderson
Use generic routines for 8-bit carry-less multiply. Remove our local version of pmull_h. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-11Merge tag 'pull-riscv-to-apply-20230911' of ↵Stefan Hajnoczi
https://github.com/alistair23/qemu into staging First RISC-V PR for 8.2 * Remove 'host' CPU from TCG * riscv_htif Fixup printing on big endian hosts * Add zmmul isa string * Add smepmp isa string * Fix page_check_range use in fault-only-first * Use existing lookup tables for MixColumns * Add RISC-V vector cryptographic instruction set support * Implement WARL behaviour for mcountinhibit/mcounteren * Add Zihintntl extension ISA string to DTS * Fix zfa fleq.d and fltq.d * Fix upper/lower mtime write calculation * Make rtc variable names consistent * Use abi type for linux-user target_ucontext * Add RISC-V KVM AIA Support * Fix riscv,pmu DT node path in the virt machine * Update CSR bits name for svadu extension * Mark zicond non-experimental * Fix satp_mode_finalize() when satp_mode.supported = 0 * Fix non-KVM --enable-debug build * Add new extensions to hwprobe * Use accelerated helper for AES64KS1I * Allocate itrigger timers only once * Respect mseccfg.RLB for pmpaddrX changes * Align the AIA model to v1.0 ratified spec * Don't read the CSR in riscv_csrrw_do64 # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmT+ttMACgkQr3yVEwxT # gBN/rg/+KhOvL9xWSNb8pzlIsMQHLvndno0Sq5b9Rb/o5z1ekyYfyg6712N3JJpA # TIfZzOIW7oYZV8gHyaBtOt8kIbrjwzGB2rpCh4blhm+yNZv7Ym9Ko6AVVzoUDo7k # 2dWkLnC+52/l3SXGeyYMJOlgUUsQMwjD6ykDEr42P6DfVord34fpTH7ftwSasO9K # 35qJQqhUCgB3fMzjKTYICN6Rm1UluijTjRNXUZXC0XZlr+UKw2jT/UsybbWVXyNs # SmkRtF1MEVGvw+b8XOgA/nG1qVCWglTMcPvKjWMY+cY9WLM6/R9nXAV8OL/JPead # v1LvROJNukfjNtDW6AOl5/svOJTRLbIrV5EO7Hlm1E4kftGmE5C+AKZZ/VT4ucUK # XgqaHoXh26tFEymVjzbtyFnUHNv0zLuGelTnmc5Ps1byLSe4lT0dBaJy6Zizg0LE # DpTR7s3LpyV3qB96Xf9bOMaTPsekUjD3dQI/3X634r36+YovRXapJDEDacN9whbU # BSZc20NoM5UxVXFTbELQXolue/X2BRLxpzB+BDG8/cpu/MPgcCNiOZaVrr/pOo33 # 6rwwrBhLSCfYAXnJ52qTUEBz0Z/FnRPza8AU/uuRYRFk6JhUXIonmO6xkzsoNKuN # QNnih/v1J+1XqUyyT2InOoAiTotzHiWgKZKaMfAhomt2j/slz+A= # =aqcx # -----END PGP SIGNATURE----- # gpg: Signature made Mon 11 Sep 2023 02:42:27 EDT # gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013 * tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu: (45 commits) target/riscv: don't read CSR in riscv_csrrw_do64 target/riscv: Align the AIA model to v1.0 ratified spec target/riscv/pmp.c: respect mseccfg.RLB for pmpaddrX changes target/riscv: Allocate itrigger timers only once target/riscv: Use accelerated helper for AES64KS1I linux-user/riscv: Add new extensions to hwprobe hw/intc/riscv_aplic.c fix non-KVM --enable-debug build hw/riscv/virt.c: fix non-KVM --enable-debug build riscv: zicond: make non-experimental target/riscv: fix satp_mode_finalize() when satp_mode.supported = 0 target/riscv: Update CSR bits name for svadu extension hw/riscv: virt: Fix riscv,pmu DT node path target/riscv: select KVM AIA in riscv virt machine target/riscv: update APLIC and IMSIC to support KVM AIA target/riscv: Create an KVM AIA irqchip target/riscv: check the in-kernel irqchip support target/riscv: support the AIA device emulation with KVM enabled linux-user/riscv: Use abi type for target_ucontext hw/intc: Make rtc variable names consistent hw/intc: Fix upper/lower mtime write calculation ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-09-11Merge tag 'pull-target-arm-20230908' of ↵Stefan Hajnoczi
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * New CPU type: cortex-a710 * Implement new architectural features: - FEAT_PACQARMA3 - FEAT_EPAC - FEAT_Pauth2 - FEAT_FPAC - FEAT_FPACCOMBINE - FEAT_TIDCP1 * Xilinx Versal: Model the CFU/CFI * Implement RMR_ELx registers * Implement handling of HCR_EL2.TIDCP trap bit * arm/kvm: Enable support for KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE * hw/intc/arm_gicv3_its: Avoid maybe-uninitialized error in get_vte() * target/arm: Do not use gen_mte_checkN in trans_STGP * arm64: Restore trapless ptimer access # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmT7VEkZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3v7BEACENUKCxsFHRQSLmQkoBCT9 # Lc4SJrGCbVUC6b+4s5ligZSWIoFzp/kY6NPpeRYqFa0DCxozd2T5D81/j7TpSo0C # wUFkZfUq1nGFJ4K5arYcDwhdTtJvvc07YrSbUqufBp6uNGqhR4YmDWPECqBfOlaj # 7bgJM6axsg7FkJJh5zp4cQ4WEfp14MHWRPQWpVTI+9cxNmNymokSVRBhVFkM0Wen # WD4C/nYud8bOxpDfR8GkIqJ+UnUMhUNEhp28QmHdwywgg0zLWOE4ysIxo55cM0+0 # FL3q45PL2e4S24UUx9dkxDBWnKEZ5qpQpPn9F6EhWzfm3n2dqr4uUnfWAEOg6NAi # vnGS9MlL7nZo69OM3h8g7yKDfTKYm2vl9HVZ0ytFA6PLoSnaQyQwli58qnLtiid3 # 17MWPoNQlq6G8tHUTPkrJjdA8XLz0iNPXe5G2kwhuM/S0Lv7ORzDc2pq4qBYLvIw # 9nV0oUWqzyE7zH6bRKxbbPw2sMI7c8qQr9QRyZeLHL7HdcY5ExvX9FH+qii5JDR/ # fZohi1pBoNNwYYTeSRnxgHiQ7OizYq0xQJhrdqcFF9voytZj1yZEZ0mp6Tq0/CIj # YkC/vEyLYBqgrJ2JeUjbV3h1RIzQcVaXxnxwGsyMyceACd6MNMmdbjR7bZk0lNIu # kh+aFEdKajPp56UseJiKBQ== # =5Shq # -----END PGP SIGNATURE----- # gpg: Signature made Fri 08 Sep 2023 13:05:13 EDT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20230908' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits) arm/kvm: Enable support for KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE target/arm: Enable SCTLR_EL1.TIDCP for user-only target/arm: Implement FEAT_TIDCP1 target/arm: Implement HCR_EL2.TIDCP target/arm: Implement cortex-a710 target/arm: Implement RMR_ELx arm64: Restore trapless ptimer access target/arm: Do not use gen_mte_checkN in trans_STGP hw/arm/versal: Connect the CFRAME_REG and CFRAME_BCAST_REG hw/arm/xlnx-versal: Connect the CFU_APB, CFU_FDRO and CFU_SFR hw/misc: Introduce a model of Xilinx Versal's CFRAME_BCAST_REG hw/misc: Introduce a model of Xilinx Versal's CFRAME_REG hw/misc/xlnx-versal-cfu: Introduce a model of Xilinx Versal's CFU_SFR hw/misc/xlnx-versal-cfu: Introduce a model of Xilinx Versal CFU_FDRO hw/misc: Introduce a model of Xilinx Versal's CFU_APB hw/misc: Introduce the Xilinx CFI interface hw/intc/arm_gicv3_its: Avoid maybe-uninitialized error in get_vte() target/arm: Implement FEAT_FPAC and FEAT_FPACCOMBINE target/arm: Inform helpers whether a PAC instruction is 'combined' target/arm: Implement FEAT_Pauth2 ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-09-11crypto: Create sm4_subwordMax Chou
Allows sharing of sm4_subword between different targets. Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Max Chou <max.chou@sifive.com> Message-ID: <20230711165917.2629866-14-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-08arm/kvm: Enable support for KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZEShameer Kolothum
Now that we have Eager Page Split support added for ARM in the kernel, enable it in Qemu. This adds, -eager-split-size to -accel sub-options to set the eager page split chunk size. -enable KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE. The chunk size specifies how many pages to break at a time, using a single allocation. Bigger the chunk size, more pages need to be allocated ahead of time. Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Message-id: 20230905091246.1931-1-shameerali.kolothum.thodi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Enable SCTLR_EL1.TIDCP for user-onlyRichard Henderson
The linux kernel detects and enables this bit. Once trapped, EC_SYSTEMREGISTERTRAP is treated like EC_UNCATEGORIZED, so no changes required within linux-user/aarch64/cpu_loop.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230831232441.66020-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Implement FEAT_TIDCP1Richard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230831232441.66020-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Implement HCR_EL2.TIDCPRichard Henderson
Perform the check for EL2 enabled in the security space and the TIDCP bit in an out-of-line helper. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230831232441.66020-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Implement cortex-a710Richard Henderson
The cortex-a710 is a first generation ARMv9.0-A processor. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230831232441.66020-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Implement RMR_ELxRichard Henderson
Provide a stub implementation, as a write is a "request". Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230831232441.66020-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08arm64: Restore trapless ptimer accessColton Lewis
Due to recent KVM changes, QEMU is setting a ptimer offset resulting in unintended trap and emulate access and a consequent performance hit. Filter out the PTIMER_CNT register to restore trapless ptimer access. Quoting Andrew Jones: Simply reading the CNT register and writing back the same value is enough to set an offset, since the timer will have certainly moved past whatever value was read by the time it's written. QEMU frequently saves and restores all registers in the get-reg-list array, unless they've been explicitly filtered out (with Linux commit 680232a94c12, KVM_REG_ARM_PTIMER_CNT is now in the array). So, to restore trapless ptimer accesses, we need a QEMU patch to filter out the register. See https://lore.kernel.org/kvmarm/gsntttsonus5.fsf@coltonlewis-kvm.c.googlers.com/T/#m0770023762a821db2a3f0dd0a7dc6aa54e0d0da9 for additional context. Cc: qemu-stable@nongnu.org Signed-off-by: Andrew Jones <andrew.jones@linux.dev> Signed-off-by: Colton Lewis <coltonlewis@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Colton Lewis <coltonlewis@google.com> Message-id: 20230831190052.129045-1-coltonlewis@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Do not use gen_mte_checkN in trans_STGPRichard Henderson
STGP writes to tag memory, it does not check it. This happened to work because we wrote tag memory first so that the check always succeeded. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230901203103.136408-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Implement FEAT_FPAC and FEAT_FPACCOMBINEAaron Lindsay
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-10-richard.henderson@linaro.org Message-Id: <20230609172324.982888-8-aaron@os.amperecomputing.com> [rth: Simplify fpac comparison, reusing cmp_mask] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Inform helpers whether a PAC instruction is 'combined'Aaron Lindsay
An instruction is a 'combined' Pointer Authentication instruction if it does something in addition to PAC -- for instance, branching to or loading an address from the authenticated pointer. Knowing whether a PAC operation is 'combined' is needed to implement FEAT_FPACCOMBINE. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-9-richard.henderson@linaro.org Message-Id: <20230609172324.982888-7-aaron@os.amperecomputing.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Implement FEAT_Pauth2Aaron Lindsay
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-8-richard.henderson@linaro.org Message-Id: <20230609172324.982888-6-aaron@os.amperecomputing.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Implement FEAT_EPACAaron Lindsay
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-7-richard.henderson@linaro.org Message-Id: <20230609172324.982888-5-aaron@os.amperecomputing.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Implement FEAT_PACQARMA3Richard Henderson
Implement the QARMA3 cryptographic algorithm for PAC calculation. Implement a cpu feature to select the algorithm and document it. Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-6-richard.henderson@linaro.org Message-Id: <20230609172324.982888-4-aaron@os.amperecomputing.com> [rth: Merge cpu feature addition from another patch.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Don't change pauth features when changing algorithmRichard Henderson
We have cpu properties to adjust the pauth algorithm for the purpose of speed of emulation. Retain the set of pauth features supported by the cpu even as the algorithm changes. This already affects the neoverse-v1 cpu, which has FEAT_EPAC. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Add feature detection for FEAT_Pauth2 and extensionsAaron Lindsay
Rename isar_feature_aa64_pauth_arch to isar_feature_aa64_pauth_qarma5 to distinguish the other architectural algorithm qarma3. Add ARMPauthFeature and isar_feature_pauth_feature to cover the other pauth conditions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-4-richard.henderson@linaro.org Message-Id: <20230609172324.982888-3-aaron@os.amperecomputing.com> [rth: Add ARMPauthFeature and eliminate most other predicates] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08target/arm: Add ID_AA64ISAR2_EL1Aaron Lindsay
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-3-richard.henderson@linaro.org [PMM: drop the HVF part of the patch and just comment that we need to do something when the register appears in that API] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-09-08trivial: Simplify the spots that use TARGET_BIG_ENDIAN as a numeric valueThomas Huth
TARGET_BIG_ENDIAN is *always* defined, either as 0 for little endian targets or as 1 for big endian targets. So we can use this as a value directly in places that need such a 0 or 1 for some reason, instead of taking a detour through an additional local variable or something similar. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-08-31Merge tag 'pull-target-arm-20230831' of ↵Stefan Hajnoczi
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Some of the preliminary patches for Cortex-A710 support * i.MX7 and i.MX6UL refactoring * Implement SRC device for i.MX7 * Catch illegal-exception-return from EL3 with bad NSE/NS * Use 64-bit offsets for holding time_t differences in RTC devices * Model correct number of MPU regions for an505, an521, an524 boards # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmTwbukZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3ihBD/wK8Iz0KpTAwZBDAodnSZrh # tQnJAvYFp8CxA4O8sZ9IeWsZh90gzsTCZi0NqUTTzvWCJfxkB7qTPdlJT5IzVxou # oEUk2aogSJhRA3XRJzqArXsPlnZGSYDbtwKx4VtfCvOCCH08Y7nhnFaRj1oFnR4Q # 0PE/8YtGXTBxLHrO8U3tomg7zElzOUP8ZVZtb30BOyw1jtfSD03IZR8dzpA43u1E # Hh418WvVekmwFoFNh8yUeHzbyXMZufzvbJPuDGJ8pPWwIpvSG6chOnKF8jZll+Ur # DqOsDkGlQgcBR2QwYfSPClrEkX8yahJ95PBfM6giG+DQC7OiElqXqTiUGZcpgUVo # uSUbzS4YPsxCnyVV6SBXV+f/8hdXBxOSHTgl7OAFa8X9OwWwspxHJ/v2o/2ibnUT # hTTkFp/w1nQwVEN8xf1DOUpm/J2Wr8UeH4f776daSrfKAol2BKbHb8dOgGLQCwqb # G+iDcE4bkzRqly6f+uVk8xSEZDd9P1NYoxKV+gNlV1dTspdHVpTC+rXMa8dRw5hI # 4KgaAslj++Xa229xkjORXCJ1cICRIebYg7+SjvTtGBYsFV7plsCcYb/R9yLmhVCf # fKHKKaYe9sQJ82apOIkTc+nnW8BQQx6XUmU/A//iZ8JGLk6DpJcZ8f1m/2rVZTsl # 9+lsmpBf4w+uR4o+Womhfw== # =MFh3 # -----END PGP SIGNATURE----- # gpg: Signature made Thu 31 Aug 2023 06:43:53 EDT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20230831' of https://git.linaro.org/people/pmaydell/qemu-arm: (24 commits) hw/arm: Set number of MPU regions correctly for an505, an521, an524 hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init rtc: Use time_t for passing and returning time offsets hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm() target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS Add i.MX7 SRC device implementation Add i.MX7 missing TZ devices and memory regions Refactor i.MX7 processor code Add i.MX6UL missing devices. Refactor i.MX6UL processor code Remove i.MX7 IOMUX GPR device from i.MX6UL target/arm: properly document FEAT_CRC32 target/arm: Implement FEAT_HPDS2 as a no-op target/arm: Suppress FEAT_TRBE (Trace Buffer Extension) target/arm: Apply access checks to neoverse-v1 special registers target/arm: Apply access checks to neoverse-n1 special registers target/arm: Introduce make_ccsidr64 ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-08-31target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_initPeter Maydell
Where architecturally one ARM_FEATURE_X flag implies another ARM_FEATURE_Y, we allow the CPU init function to only set X, and then set Y for it. Currently we do this in two places -- we set a few flags in arm_cpu_post_init() because we need them to decide which properties to create on the CPU object, and then we do the rest in arm_cpu_realizefn(). However, this is fragile, because it's easy to add a new property and not notice that this means that an X-implies-Y check now has to move from realize to post-init. As a specific example, the pmsav7-dregion property is conditional on ARM_FEATURE_PMSA && ARM_FEATURE_V7, which means it won't appear on the Cortex-M33 and -M55, because they set ARM_FEATURE_V8 and rely on V8-implies-V7, which doesn't happen until the realizefn. Move all of these X-implies-Y checks into a new function, which we call at the top of arm_cpu_post_init(), so the feature bits are available at that point. This does now give us the reverse issue, that if there's a feature bit which is enabled or disabled by the setting of a property then then X-implies-Y features that are dependent on that property need to be in realize, not in this new function. But the only one of those is the "EL3 implies VBAR" which is already in the right place, so putting things this way round seems better to me. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230724174335.2150499-2-peter.maydell@linaro.org
2023-08-31target/arm: Catch illegal-exception-return from EL3 with bad NSE/NSPeter Maydell
The architecture requires (R_TYTWB) that an attempt to return from EL3 when SCR_EL3.{NSE,NS} are {1,0} is an illegal exception return. (This enforces that the CPU can't ever be executing below EL3 with the NSE,NS bits indicating an invalid security state.) We were missing this check; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230807150618.101357-1-peter.maydell@linaro.org
2023-08-31target/arm: properly document FEAT_CRC32Alex Bennée
This is a mandatory feature for Armv8.1 architectures but we don't state the feature clearly in our emulation list. Also include FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org Cc: qemu-stable@nongnu.org Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org> [PMM: pluralize 'instructions' in docs] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 20:53:42 +0000