aboutsummaryrefslogtreecommitdiff
path: root/target/arm
AgeCommit message (Collapse)Author
2017-12-21cpu: refactor cpu_address_space_init()Peter Xu
Normally we create an address space for that CPU and pass that address space into the function. Let's just do it inside to unify address space creations. It'll simplify my next patch to rename those address spaces. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20171123092333.16085-3-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-13target/arm: Extend PAR format determinationEdgar E. Iglesias
Now that do_ats_write() is entirely in control of whether to generate a 32-bit PAR or a 64-bit PAR, we can make it use the correct (complicated) condition for doing so. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1512503192-2239-13-git-send-email-peter.maydell@linaro.org [PMM: Rebased Edgar's patch on top of get_phys_addr() refactoring; use arm_s1_regime_using_lpae_format() rather than regime_using_lpae_format() because the latter will assert if passed ARMMMUIdx_S12NSE0 or ARMMMUIdx_S12NSE1; updated commit message appropriately] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13target/arm: Remove fsr argument from get_phys_addr() and arm_tlb_fill()Peter Maydell
All of the callers of get_phys_addr() and arm_tlb_fill() now ignore the FSR values they return, so we can just remove the argument entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-12-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Ignore fsr from get_phys_addr() in do_ats_write()Peter Maydell
In do_ats_write(), rather than using the FSR value from get_phys_addr(), construct the PAR values using the information in the ARMMMUFaultInfo struct. This allows us to create a PAR of the correct format regardless of what the translation table format is. For the moment we leave the condition for "when should this be a 64 bit PAR" as it was previously; this will need to be fixed to properly support AArch32 Hyp mode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-11-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Use ARMMMUFaultInfo in deliver_fault()Peter Maydell
Now that ARMMMUFaultInfo is guaranteed to have enough information to construct a fault status code, we can pass it in to the deliver_fault() function and let it generate the correct type of FSR for the destination, rather than relying on the value provided by get_phys_addr(). I don't think there are any cases the old code was getting wrong, but this is more obviously correct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-10-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Convert get_phys_addr_pmsav8() to not return FSC valuesPeter Maydell
Make get_phys_addr_pmsav8() return a fault type in the ARMMMUFaultInfo structure, which we convert to the FSC at the callsite. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-9-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Convert get_phys_addr_pmsav7() to not return FSC valuesPeter Maydell
Make get_phys_addr_pmsav7() return a fault type in the ARMMMUFaultInfo structure, which we convert to the FSC at the callsite. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-8-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Convert get_phys_addr_pmsav5() to not return FSC valuesPeter Maydell
Make get_phys_addr_pmsav5() return a fault type in the ARMMMUFaultInfo structure, which we convert to the FSC at the callsite. Note that PMSAv5 does not define any guest-visible fault status register, so the different "fsr" values we were previously returning are entirely arbitrary. So we can just switch to using the most appropriae fi->type values without worrying that we need to special-case FaultInfo->FSC conversion for PMSAv5. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-7-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Convert get_phys_addr_lpae() to not return FSC valuesPeter Maydell
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo structure, which we convert to the FSC at the callsite. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-6-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Convert get_phys_addr_v6() to not return FSC valuesPeter Maydell
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo structure, which we convert to the FSC at the callsite. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-5-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Convert get_phys_addr_v5() to not return FSC valuesPeter Maydell
Make get_phys_addr_v5() return a fault type in the ARMMMUFaultInfo structure, which we convert to the FSC at the callsite. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-4-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Remove fsr argument from arm_ld*_ptw()Peter Maydell
All the callers of arm_ldq_ptw() and arm_ldl_ptw() ignore the value that those functions store in the fsr argument on failure: if they return failure to their callers they will always overwrite the fsr value with something else. Remove the argument from these functions and S1_ptw_translate(). This will simplify removing fsr from the calling functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-3-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Provide fault type enum and FSR conversion functionsPeter Maydell
Currently get_phys_addr() and its various subfunctions return a hard-coded fault status register value for translation failures. This is awkward because FSR values these days may be either long-descriptor format or short-descriptor format. Worse, the right FSR type to use doesn't depend only on the translation table being walked -- some cases, like fault info reported to AArch32 EL2 for some kinds of ATS operation, must be in long-descriptor format even if the translation table being walked was short format. We can't get those cases right with our current approach. Provide fields in the ARMMMUFaultInfo struct which allow get_phys_addr() to provide sufficient information for a caller to construct an FSR value themselves, and utility functions which do this for both long and short format FSR values, as a first step in switching get_phys_addr() and its children to only returning the failure cause in the ARMMMUFaultInfo struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1512503192-2239-2-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Implement TT instructionPeter Maydell
Implement the TT instruction which queries the security state and access permissions of a memory location. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1512153879-5291-8-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Factor MPU lookup code out of get_phys_addr_pmsav8()Peter Maydell
For the TT instruction we're going to need to do an MPU lookup that also tells us which MPU region the access hit. This requires us to do the MPU lookup without first doing the SAU security access check, so pull the MPU lookup parts of get_phys_addr_pmsav8() out into their own function. The TT instruction also needs to know the MPU region number which the lookup hit, so provide this information to the caller of the MPU lookup code, even though get_phys_addr_pmsav8() doesn't need to know it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1512153879-5291-7-git-send-email-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-12-13target/arm: Create new arm_v7m_mmu_idx_for_secstate_and_priv()Peter Maydell
The TT instruction is going to need to look up the MMU index for a specified security and privilege state. Refactor the existing arm_v7m_mmu_idx_for_secstate() into a version that lets you specify the privilege state and one that uses the current state of the CPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1512153879-5291-6-git-send-email-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-12-13target/arm: Split M profile MNegPri mmu index into user and privPeter Maydell
For M profile, we currently have an mmu index MNegPri for "requested execution priority negative". This fails to distinguish "requested execution priority negative, privileged" from "requested execution priority negative, usermode", but the two can return different results for MPU lookups. Fix this by splitting MNegPri into MNegPriPriv and MNegPriUser, and similarly for the Secure equivalent MSNegPri. This takes us from 6 M profile MMU modes to 8, which means we need to bump NB_MMU_MODES; this is OK since the point where we are forced to reduce TLB sizes is 9 MMU modes. (It would in theory be possible to stick with 6 MMU indexes: {mpu-disabled,user,privileged} x {secure,nonsecure} since in the MPU-disabled case the result of an MPU lookup is always the same for both user and privileged code. However we would then need to rework the TB flags handling to put user/priv into the TB flags separately from the mmuidx. Adding an extra couple of mmu indexes is simpler.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1512153879-5291-5-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Add missing M profile case to regime_is_user()Peter Maydell
When we added the ARMMMUIdx_MSUser MMU index we forgot to add it to the case statement in regime_is_user(), so we weren't treating it as unprivileged when doing MPU lookups. Correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1512153879-5291-4-git-send-email-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-12-13target/arm: Allow explicit writes to CONTROL.SPSEL in Handler modePeter Maydell
In ARMv7M the CPU ignores explicit writes to CONTROL.SPSEL in Handler mode. In v8M the behaviour is slightly different: writes to the bit are permitted but will have no effect. We've already done the hard work to handle the value in CONTROL.SPSEL being out of sync with what stack pointer is actually in use, so all we need to do to fix this last loose end is to update the condition we use to guard whether we call write_v7m_control_spsel() on the register write. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1512153879-5291-3-git-send-email-peter.maydell@linaro.org
2017-12-13target/arm: Handle SPSEL and current stack being out of sync in MSP/PSP readsPeter Maydell
For v8M it is possible for the CONTROL.SPSEL bit value and the current stack to be out of sync. This means we need to update the checks used in reads and writes of the PSP and MSP special registers to use v7m_using_psp() rather than directly checking the SPSEL bit in the control register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1512153879-5291-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-12-11target/arm: Generate UNDEF for 32-bit Thumb2 insnsPeter Maydell
The refactoring of commit 296e5a0a6c3935 has a nasty bug: it accidentally dropped the generation of code to raise the UNDEF exception when disas_thumb2_insn() returns nonzero. This means that 32-bit Thumb2 instruction patterns that ought to UNDEF just act like nops instead. This is likely to break any number of things, including the kernel's "disable the FPU and use the UNDEF exception to identify when to turn it back on again" trick. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1513006964-3371-1-git-send-email-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-20arm: check regime, not current state, for ATS write PAR formatPeter Maydell
In do_ats_write(), rather than using extended_addresses_enabled() to decide whether the value we get back from get_phys_addr() is a 64-bit format PAR or a 32-bit one, use arm_s1_regime_using_lpae_format(). This is not really the correct answer, because the PAR format depends on the AT instruction being used, not just on the translation regime. However getting this correct requires a significant refactoring, so that get_phys_addr() returns raw information about the fault which the caller can then assemble into a suitable FSR/PAR/syndrome for its purposes, rather than get_phys_addr() returning a pre-formatted FSR. However this change at least improves the situation by making the PAR work correctly for address translation operations done at AArch64 EL2 on the EL2 translation regime. In particular, this is necessary for Xen to be able to run in our emulation, so this seems like a safer interim fix given that we are in freeze. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1509719814-6191-1-git-send-email-peter.maydell@linaro.org
2017-11-20target/arm: Report GICv3 sysregs present in ID registers if neededPeter Maydell
The CPU ID registers ID_AA64PFR0_EL1, ID_PFR1_EL1 and ID_PFR1 have a field for reporting presence of GICv3 system registers. We need to report this field correctly in order for Xen to work as a guest inside QEMU emulation. We mustn't incorrectly claim the sysregs exist when they don't, though, or Linux will crash. Unfortunately the way we've designed the GICv3 emulation in QEMU puts the system registers as part of the GICv3 device, which may be created after the CPU proper has been realized. This means that we don't know at the point when we define the ID registers what the correct value is. Handle this by switching them to calling a function at runtime to read the value, where we can fill in the GIC field appropriately. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: 1510066898-3725-1-git-send-email-peter.maydell@linaro.org
2017-11-15target/arm: Fix GETPC usage in do_paired_cmpxchg64_l/beRichard Henderson
Use of GETPC must be restricted to those functions that are directly called from TCG generated code. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Fixes: 2399d4e7cec22ecf1c51062d2ebfd45220dbaace Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-15target/arm: Use helper_retaddr in stxp helpersRichard Henderson
We use raw memory primitives along the !parallel_cpus paths in order to simplify the endianness handling. Because of that, we did not benefit from the generic changes to cpu_ldst_user_only_template.h. The simplest fix is to manipulate helper_retaddr here. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-13arm/translate-a64: mark path as unreachable to eliminate warningEmilio G. Cota
Fixes the following warning when compiling with gcc 5.4.0 with -O1 optimizations and --enable-debug: target/arm/translate-a64.c: In function ‘aarch64_tr_translate_insn’: target/arm/translate-a64.c:2361:8: error: ‘post_index’ may be used uninitialized in this function [-Werror=maybe-uninitialized] if (!post_index) { ^ target/arm/translate-a64.c:2307:10: note: ‘post_index’ was declared here bool post_index; ^ target/arm/translate-a64.c:2386:8: error: ‘writeback’ may be used uninitialized in this function [-Werror=maybe-uninitialized] if (writeback) { ^ target/arm/translate-a64.c:2308:10: note: ‘writeback’ was declared here bool writeback; ^ Note that idx comes from selecting 2 bits, and therefore its value can be at most 3. Signed-off-by: Emilio G. Cota <cota@braap.org> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1510087611-1851-1-git-send-email-cota@braap.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-09disas: Dump insn bytes along with capstone disassemblyRichard Henderson
This feature is present for some targets in the bfd disassembler(s). Implement it generically for all capstone users. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-07translate.c: Fix usermode big-endian AArch32 LDREXD and STREXDPeter Maydell
For AArch32 LDREXD and STREXD, architecturally the 32-bit word at the lowest address is always Rt and the one at addr+4 is Rt2, even if the CPU is big-endian. Our implementation does these with a single 64-bit store, so if we're big-endian then we need to put the two 32-bit halves together in the opposite order to little-endian, so that they end up in the right places. We were trying to do this with the gen_aa32_frob64() function, but that is not correct for the usermode emulator, because there there is a distinction between "load a 64 bit value" (which does a BE 64-bit access and doesn't need swapping) and "load two 32 bit values as one 64 bit access" (where we still need to do the swapping, like system mode BE32). Fixes: https://bugs.launchpad.net/qemu/+bug/1725267 Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1509622400-13351-1-git-send-email-peter.maydell@linaro.org
2017-11-07arm: implement cache/shareability attribute bits for PAR registersAndrew Baumann
On a successful address translation instruction, PAR is supposed to contain cacheability and shareability attributes determined by the translation. We previously returned 0 for these bits (in line with the general strategy of ignoring caches and memory attributes), but some guest OSes may depend on them. This patch collects the attribute bits in the page-table walk, and updates PAR with the correct attributes for all LPAE translations. Short descriptor formats still return 0 for these bits, as in the prior implementation. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 20171031223830.4608-1-Andrew.Baumann@microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-31fix WFI/WFE length in syndrome registerStefano Stabellini
WFI/E are often, but not always, 4 bytes long. When they are, we need to set ARM_EL_IL_SHIFT in the syndrome register. Pass the instruction length to HELPER(wfi), use it to decrement pc appropriately and to pass an is_16bit flag to syn_wfx, which sets ARM_EL_IL_SHIFT if needed. Set dc->insn in both arm_tr_translate_insn and thumb_tr_translate_insn. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Message-id: alpine.DEB.2.10.1710241055160.574@sstabellini-ThinkPad-X260 [PMM: move setting of dc->insn for Thumb so it is correct for 32 bit insns] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-27Merge remote-tracking branch 'remotes/rth/tags/pull-dis-20171026' into stagingPeter Maydell
Capstone disassembler # gpg: Signature made Thu 26 Oct 2017 10:57:27 BST # gpg: using RSA key 0x64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-dis-20171026: disas: Add capstone as submodule disas: Remove monitor_disas_is_physical ppc: Support Capstone in disas_set_info arm: Support Capstone in disas_set_info i386: Support Capstone in disas_set_info disas: Support the Capstone disassembler library disas: Remove unused flags arguments target/arm: Don't set INSN_ARM_BE32 for CONFIG_USER_ONLY target/arm: Move BE32 disassembler fixup target/ppc: Convert to disas_set_info hook target/i386: Convert to disas_set_info hook Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # target/i386/cpu.c # target/ppc/translate_init.c
2017-10-26tcg: Avoid setting tcg_initialize if !CONFIG_TCGRichard Henderson
Fix the build for --disable-tcg. Fixes: 55c3ceef61fcf06fc98ddc752b7cce788ce7680b Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20171026135814.20773-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-25arm: Support Capstone in disas_set_infoRichard Henderson
Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25disas: Remove unused flags argumentsRichard Henderson
Now that every target is using the disas_set_info hook, the flags argument is unused. Remove it. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25target/arm: Don't set INSN_ARM_BE32 for CONFIG_USER_ONLYRichard Henderson
This matches translator behaviour in arm_lduw_code. Fixes: https://bugs.launchpad.net/qemu/+bug/1724485 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25target/arm: Move BE32 disassembler fixupRichard Henderson
The Capstone disassembler has its own big-endian fixup. Doing this twice does not work, of course. Move our current fixup from target/arm/cpu.c to disas/arm.c. This makes read_memory_inner_func unused and can be removed. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: Initialize cpu_env genericallyRichard Henderson
This is identical for each target. So, move the initialization to common code. Move the variable itself out of tcg_ctx and name it cpu_env to minimize changes within targets. This also means we can remove tcg_global_reg_new_{ptr,i32,i64}, since there are no longer global-register temps created by targets. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: define tcg_init_ctx and make tcg_ctx a pointerEmilio G. Cota
Groundwork for supporting multiple TCG contexts. The core of this patch is this change to tcg/tcg.h: > -extern TCGContext tcg_ctx; > +extern TCGContext tcg_init_ctx; > +extern TCGContext *tcg_ctx; Note that for now we set *tcg_ctx to whatever TCGContext is passed to tcg_context_init -- in this case &tcg_init_ctx. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24target/arm: check CF_PARALLEL instead of parallel_cpusEmilio G. Cota
Thereby decoupling the resulting translated code from the current state of the system. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: convert tb->cflags reads to tb_cflags(tb)Emilio G. Cota
Convert all existing readers of tb->cflags to tb_cflags, so that we use atomic_read and therefore avoid undefined behaviour in C11. Note that the remaining setters/getters of the field are protected by tb_lock, and therefore do not need conversion. Luckily all readers access the field via 'tb->cflags' (so no foo.cflags, bar->cflags in the code base), which makes the conversion easily scriptable: FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \ accel/tcg/translator.c | cut -f1 -d':' | sort | uniq) perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES Then manually fixed the few errors that checkpatch reported. Compile-tested for all targets. Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24qom: Introduce CPUClass.tcg_initializeRichard Henderson
Move target cpu tcg initialization to common code, called from cpu_exec_realizefn. Acked-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-12target/arm: Implement SG instruction corner casesPeter Maydell
The common situation of the SG instruction is that it is executed from S&NSC memory by a CPU in NS state. That case is handled by v7m_handle_execute_nsc(). However the instruction also has defined behaviour in a couple of other cases: * SG instruction in NS memory (behaves as a NOP) * SG in S memory but CPU already secure (clears IT bits and does nothing else) * SG instruction in v8M without Security Extension (NOP) These can be implemented in translate.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1507556919-24992-10-git-send-email-peter.maydell@linaro.org
2017-10-12target/arm: Support some Thumb insns being always unconditionalPeter Maydell
A few Thumb instructions are always unconditional even inside an IT block (as opposed to being UNPREDICTABLE if used inside an IT block): BKPT, the v8M SG instruction, and the A profile HLT (debug halt) instruction. This means we need to suppress the jump-over-instruction-on-condfail code generation (though the IT state still advances as usual and subsequent insns in the IT block may be conditional). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1507556919-24992-9-git-send-email-peter.maydell@linaro.org
2017-10-12target-arm: Simplify insn_crosses_page()Peter Maydell
Recent changes have left insn_crosses_page() more complicated than it needed to be: * it's only called from thumb_tr_translate_insn() so we know for certain that we're looking at a Thumb insn * the caller's check for dc->pc >= dc->next_page_start - 3 means that dc->pc can't possibly be 4 aligned, so there's no need to check that (the check was partly there to ensure that we didn't treat an ARM insn as Thumb, I think) * we now have thumb_insn_is_16bit() which lets us do a precise check of the length of the next insn, rather than opencoding an inaccurate check Simplify it down to just loading the first half of the insn and calling thumb_insn_is_16bit() on it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1507556919-24992-8-git-send-email-peter.maydell@linaro.org
2017-10-12target/arm: Pull Thumb insn word loads up to top levelPeter Maydell
Refactor the Thumb decode to do the loads of the instruction words at the top level rather than only loading the second half of a 32-bit Thumb insn in the middle of the decode. This is simple apart from the awkward case of Thumb1, where the BL/BLX prefix and suffix instructions live in what in Thumb2 is the 32-bit insn space. To handle these we decode enough to identify whether we're looking at a prefix/suffix that we handle as a 16 bit insn, or a prefix that we're going to merge with the following suffix to consider as a 32 bit insn. The translation of the 16 bit cases then moves from disas_thumb2_insn() to disas_thumb_insn(). The refactoring has the benefit that we don't need to pass the CPUARMState* down into the decoder code any more, but the major reason for doing this is that some Thumb instructions must be always unconditional regardless of the IT state bits, so we need to know the whole insn before we emit the "skip this insn if the IT bits and cond state tell us to" code. (The always unconditional insns are BKPT, HLT and SG; the last of these is 32 bits.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1507556919-24992-7-git-send-email-peter.maydell@linaro.org
2017-10-12target-arm: Don't check for "Thumb2 or M profile" for not-Thumb1Peter Maydell
The code which implements the Thumb1 split BL/BLX instructions is guarded by a check on "not M or THUMB2". All we really need to check here is "not THUMB2" (and we assume that elsewhere too, eg in the ARCH(6T2) test that UNDEFs the Thumb2 insns). This doesn't change behaviour because all M profile cores have Thumb2 and so ARM_FEATURE_M implies ARM_FEATURE_THUMB2. (v6M implements a very restricted subset of Thumb2, but we can cross that bridge when we get to it with appropriate feature bits.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1507556919-24992-6-git-send-email-peter.maydell@linaro.org
2017-10-12target/arm: Implement secure function returnPeter Maydell
Secure function return happens when a non-secure function has been called using BLXNS and so has a particular magic LR value (either 0xfefffffe or 0xfeffffff). The function return via BX behaves specially when the new PC value is this magic value, in the same way that exception returns are handled. Adjust our BX excret guards so that they recognize the function return magic number as well, and perform the function-return unstacking in do_v7m_exception_exit(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1507556919-24992-5-git-send-email-peter.maydell@linaro.org
2017-10-12target/arm: Implement BLXNSPeter Maydell
Implement the BLXNS instruction, which allows secure code to call non-secure code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1507556919-24992-4-git-send-email-peter.maydell@linaro.org
2017-10-12target/arm: Implement SG instructionPeter Maydell
Implement the SG instruction, which we emulate 'by hand' in the exception handling code path. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1507556919-24992-3-git-send-email-peter.maydell@linaro.org
2017-10-12target/arm: Add M profile secure MMU index values to get_a32_user_mem_index()Peter Maydell
Add the M profile secure MMU index values to the switch in get_a32_user_mem_index() so that LDRT/STRT work correctly rather than asserting at translate time. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1507556919-24992-2-git-send-email-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-31 00:05:18 +0000