aboutsummaryrefslogtreecommitdiff
path: root/target/arm
AgeCommit message (Collapse)Author
2019-01-21target/arm: Swap PMU values before/after migrationsAaron Lindsay
Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies. Signed-off-by: Aaron Lindsay <aclindsa@gmail.com> Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-4-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Reorganize PMCCNTR accessesAaron Lindsay
pmccntr_read and pmccntr_write contained duplicate code that was already being handled by pmccntr_sync. Consolidate the duplicated code into two functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to c15_ccnt in CPUARMState so that we can simultaneously save both the architectural register value and the last underlying cycle count - this ensures time isn't lost and will also allow us to access the 'old' architectural register value in order to detect overflows in later patches. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Aaron Lindsay <aclindsa@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-3-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Tidy TBI handling in gen_a64_set_pcRichard Henderson
We can perform this with fewer operations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Enable PAuth for user-onlyRichard Henderson
Add 4 attributes that controls the EL1 enable bits, as we may not always want to turn on pointer authentication with -cpu max. However, by default they are enabled. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Enable PAuth for -cpu maxRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Add PAuth system registersRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Implement pauth_computepacRichard Henderson
This is the main crypto routine, an implementation of QARMA. This matches, as much as possible, ARM pseudocode. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-28-richard.henderson@linaro.org [PMM: fixed minor checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Implement pauth_addpacRichard Henderson
This is not really functional yet, because the crypto is not yet implemented. This, however follows the AddPAC pseudo function. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Implement pauth_authRichard Henderson
This is not really functional yet, because the crypto is not yet implemented. This, however follows the Auth pseudo function. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Implement pauth_stripRichard Henderson
Stripping out the authentication data does not require any crypto, it merely requires the virtual address parameters. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Reuse aa64_va_parameters for setting tbflagsRichard Henderson
The arm_regime_tbi{0,1} functions are replacable with the new function by giving the lowest and highest address. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Decode TBID from TCRRichard Henderson
Use TBID in aa64_va_parameters depending on the data parameter. This automatically updates all existing users of the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Add aa64_va_parameters_bothRichard Henderson
We will want to check TBI for I and D simultaneously. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Export aa64_va_parameters to internals.hRichard Henderson
We need to reuse this from helper-a64.c. Provide a stub definition for CONFIG_USER_ONLY. This matches the stub definitions that we removed for arm_regime_tbi{0,1} before. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Merge TBFLAG_AA_TB{0, 1} to TBIIRichard Henderson
We will shortly want to talk about TBI as it relates to data. Passing around a pair of variables is less convenient than a single variable. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Create ARMVAParameters and helpersRichard Henderson
Split out functions to extract the virtual address parameters. Let the functions choose T0 or T1 address space half, if present. Extract (most of) the control bits that vary between EL or Tx. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-19-richard.henderson@linaro.org [PMM: fixed minor checkpatch comment nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Introduce arm_stage1_mmu_idxRichard Henderson
While we could expose stage_1_mmu_idx, the combination is probably going to be more useful. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Introduce arm_mmu_idxRichard Henderson
The pattern ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); is computing the full ARMMMUIdx, stripping off the ARM bits, and then putting them back. Avoid the extra two steps with the appropriate helper function. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Move cpu_mmu_index out of lineRichard Henderson
This function is, or will shortly become, too big to inline. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Decode Load/store register (pac)Richard Henderson
Not that there are any stores involved, but why argue with ARM's naming convention. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-15-richard.henderson@linaro.org [fixed trivial comment nit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Decode PAuth within disas_uncond_b_regRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Rearrange decode in disas_uncond_b_regRichard Henderson
This will enable PAuth decode in a subsequent patch. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Add new_pc argument to helper_exception_returnRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Move helper_exception_return to helper-a64.cRichard Henderson
This function is only used by AArch64. Code movement only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Decode PAuth within disas_data_proc_2srcRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Decode PAuth within disas_data_proc_1srcRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Rearrange decode in disas_data_proc_1srcRichard Henderson
Now properly signals unallocated for REV64 with SF=0. Allows for the opcode2 field to be decoded shortly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Decode PAuth within system hint spaceRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Add PAuth helpersRichard Henderson
The cryptographic internals are stubbed out for now, but the enable and trap bits are checked. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Introduce raise_exception_raRichard Henderson
This path uses cpu_loop_exit_restore to unwind current processor state. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Add PAuth active bit to tbflagsRichard Henderson
There are 5 bits of state that could be added, but to save space within tbflags, add only a single enable bit. Helpers will determine the rest of the state at runtime. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Add SCTLR bits through ARMv8.5Richard Henderson
Post v8.4 bits taken from SysReg_v85_xml-00bet8. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Add state for the ARMv8.3-PAuth extensionRichard Henderson
Add storage space for the 5 encryption keys. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-2-richard.henderson@linaro.org [PMM: use 0xf rather than -1 in FIELD_DP64() expressions to avoid clang warnings about implicit truncation from int to bitfield changing the value] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Allow Aarch32 exception return to switch from Mon->HypAlexander Graf
In U-boot, we switch from S-SVC -> Mon -> Hyp mode when we want to enter Hyp mode. The change into Hyp mode is done by doing an exception return from Mon. This doesn't work with current QEMU. The problem is that in bad_mode_switch() we refuse to allow the change of mode. Note that bad_mode_switch() is used to do validation for two situations: (1) changes to mode by instructions writing to CPSR.M (ie not exception take/return) -- this corresponds to the Armv8 Arm ARM pseudocode Arch32.WriteModeByInstr (2) changes to mode by exception return Attempting to enter or leave Hyp mode via case (1) is forbidden in v8 and UNPREDICTABLE in v7, and QEMU is correct to disallow it there. However, we're already doing that check at the top of the bad_mode_switch() function, so if that passes then we should allow the case (2) exception return mode changes to switch into Hyp mode. We want to test whether we're trying to return to the nonexistent "secure Hyp" mode, so we need to look at arm_is_secure_below_el3() rather than arm_is_secure(), since the latter is always true if we're in Mon (EL3). Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190109152430.32359-1-agraf@suse.de [PMM: rewrote commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-11qemu/queue.h: leave head structs anonymous unless necessaryPaolo Bonzini
Most list head structs need not be given a name. In most cases the name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV or reverse iteration, but this does not apply to lists of other kinds, and even for QTAILQ in practice this is only rarely needed. In addition, we will soon reimplement those macros completely so that they do not need a name for the head struct. So clean up everything, not giving a name except in the rare case where it is necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-07Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20190107' into staging target-arm queue: * Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel) * hw/misc/tz-mpc: Fix value of BLK_MAX register * target/arm: Emit barriers for A32/T32 load-acquire/store-release insns * nRF51 SoC: add timer, GPIO, RNG peripherals * hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller * cpus.c: Fix race condition in cpu_stop_current() * hw/arm: versal: Plug memory leaks * Allow M profile boards to run even if -kernel not specified * gdbstub: Add multiprocess extension support for use when the board has multiple CPUs of different types (like the Xilinx Zynq boards) * target/arm: Don't decode S bit in SVE brk[ab] merging insns * target/arm: Convert ARM_TBFLAG_* to FIELDs # gpg: Signature made Mon 07 Jan 2019 16:29:52 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190107: (37 commits) Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel. hw/misc/tz-mpc: Fix value of BLK_MAX register target/arm: Emit barriers for A32/T32 load-acquire/store-release insns arm: Add Clock peripheral stub to NRF51 SOC tests/microbit-test: Add Tests for nRF51 Timer arm: Instantiate NRF51 Timers hw/timer/nrf51_timer: Add nRF51 Timer peripheral tests/microbit-test: Add Tests for nRF51 GPIO arm: Instantiate NRF51 general purpose I/O hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral arm: Instantiate NRF51 random number generator hw/misc/nrf51_rng: Add NRF51 random number generator peripheral arm: Add header to host common definition for nRF51 SOC peripherals qtest: Add set_irq_in command to set IRQ/GPIO level hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller cpus.c: Fix race condition in cpu_stop_current() MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/ hw/arm: versal: Plug memory leaks Revert "armv7m: Guard against no -kernel argument" arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07target/arm: Emit barriers for A32/T32 load-acquire/store-release insnsPeter Maydell
Now that MTTCG is here, the comment in the 32-bit Arm decoder that "Since the emulation does not have barriers, the acquire/release semantics need no special handling" is no longer true. Emit the correct barriers for the load-acquire/store-release insns, as we already do in the A64 decoder. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-01-07target/arm: SVE brk[ab] merging does not have s bitRichard Henderson
While brk[ab] zeroing has a flags setting option, the merging variant does not. Retain the same argument structure, to share expansion but force the flag zero and do not decode bit 22. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181226215003.31438-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07target/arm: Convert ARM_TBFLAG_* to FIELDsRichard Henderson
Use "register" TBFLAG_ANY to indicate shared state between A32 and A64, and "registers" TBFLAG_A32 & TBFLAG_A64 for fields that are specific to the given cpu state. Move ARM_TBFLAG_BE_DATA to shared state, instead of its current placement within "Bit usage when in AArch32 state". Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181218164348.7127-1-richard.henderson@linaro.org [PMM: removed the renaming of BE_DATA flag to BE] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07arm: replace instance_post_init()Marc-André Lureau
Replace arm_cpu_post_init() instance callback by calling it from leaf classes, to avoid potential ordering issue with other post_init callbacks. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-16Merge remote-tracking branch 'remotes/pmaydell/tags/pull-misc-20181214' into ↵Peter Maydell
staging miscellaneous patches: * checkpatch.pl: Enforce multiline comment syntax * Rename cpu_physical_memory_write_rom() to address_space_write_rom() * disas, monitor, elf_ops: Use address_space_read() to read memory * Remove load_image() in favour of load_image_size() * Fix some minor memory leaks in arm boards/devices * virt: fix broken indentation # gpg: Signature made Fri 14 Dec 2018 14:41:20 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-misc-20181214: (22 commits) virt: Fix broken indentation target/arm: Create timers in realize, not init tests/test-arm-mptimer: Don't leak string memory hw/sd/sdhci: Don't leak memory region in sdhci_sysbus_realize() hw/arm/mps2-tz.c: Free mscname string in make_dma() target/arm: Free name string in ARMCPRegInfo hashtable entries include/hw/loader.h: Document load_image_size() hw/core/loader.c: Remove load_image() device_tree.c: Don't use load_image() hw/block/tc58128.c: Don't use load_image() hw/i386/multiboot.c: Don't use load_image() hw/i386/pc.c: Don't use load_image() hw/pci/pci.c: Don't use load_image() hw/smbios/smbios.c: Don't use load_image() hw/ppc/ppc405_boards: Don't use load_image() hw/ppc/mac_newworld, mac_oldworld: Don't use load_image() elf_ops.h: Use address_space_write() to write memory monitor: Use address_space_read() to read memory disas.c: Use address_space_read() to read memory Rename cpu_physical_memory_write_rom() to address_space_write_rom() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-14target/arm: Create timers in realize, not initPeter Maydell
The timer_new() function allocates memory; this means that if we call it in the CPU's init method we would need to provide an instance_finalize method to free it. Defer the timer creation to the realize function instead. This fixes a memory leak spotted by clang LeakSanitizer when a CPU object is created for introspection. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181204132952.2601-6-peter.maydell@linaro.org
2018-12-14target/arm: Free name string in ARMCPRegInfo hashtable entriesPeter Maydell
When we add a new entry to the ARMCPRegInfo hash table in add_cpreg_to_hashtable(), we allocate memory for tehe ARMCPRegInfo struct itself, and we also g_strdup() the name string. So the hashtable's value destructor function must free the name string as well as the struct. Spotted by clang's leak sanitizer. The leak here is a small one-off leak at startup, because we don't support CPU hotplug, and so the only time when we destroy hash table entries is for the case where ARM_CP_OVERRIDE means we register a wildcard entry and then override it later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181204132952.2601-2-peter.maydell@linaro.org
2018-12-13target/arm: Implement the ARMv8.1-LOR extensionRichard Henderson
Provide a trivial implementation with zero limited ordering regions, which causes the LDLAR and STLLR instructions to devolve into the LDAR and STLR instructions from the base ARMv8.0 instruction set. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181210150501.7990-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13target/arm: Use arm_hcr_el2_eff more placesRichard Henderson
Since arm_hcr_el2_eff includes a check against arm_is_secure_below_el3, we can often remove a nearby check against secure state. In some cases, sort the call to arm_hcr_el2_eff to the end of a short-circuit logical sequence. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181210150501.7990-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13target/arm: Introduce arm_hcr_el2_effRichard Henderson
Replace arm_hcr_el2_{fmo,imo,amo} with a more general routine that also takes SCR_EL3.NS (aka arm_is_secure_below_el3) into account, as documented for the plethora of bits in HCR_EL2. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181210150501.7990-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13target/arm: Implement the ARMv8.2-AA32HPD extensionRichard Henderson
The bulk of the work here, beyond base HPD, is defining the TTBCR2 register. In addition we must check TTBCR.T2E, which is not present (RES0) for AArch64. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181203203839.757-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13target/arm: Implement the ARMv8.1-HPD extensionRichard Henderson
Since the TCR_*.HPD bits were RES0 in ARMv8.0, we can simply interpret the bits as if ARMv8.1-HPD is present without checking. We will need a slightly different check for hpd for aarch32. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181203203839.757-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13target/arm: Tidy scr_writeRichard Henderson
Because EL3 has a fixed execution mode, we can properly decide which of the bits are RES{0,1}. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181203203839.757-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13target/arm: Fix HCR_EL2.TGE check in arm_phys_excp_target_elRichard Henderson
The enable for TGE has already occurred within arm_hcr_el2_amo and friends. Moreover, when E2H is also set, the sense is supposed to be reversed, which has also already occurred within the helpers. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181203203839.757-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 13:46:31 +0000