| Age | Commit message (Collapse) | Author |
|---|
|
The inner loop, bounded by eltspersegment, must not be
larger than the outer loop, bounded by elements.
Cc: qemu-stable@nongnu.org
Fixes: 18fc2405781 ("target/arm: Implement SVE fp complex multiply add (indexed)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2376
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 76bccf3cb9d9383da0128bbc6d1300cddbe3ae8f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The HSTR_EL2 register allows the hypervisor to trap AArch32 EL1 and
EL0 accesses to cp15 registers. We incorrectly implemented this so
they trap to EL1 when we detect the need for a HSTR trap at code
generation time. (The check in access_check_cp_reg() which we do at
runtime to catch traps from EL0 is correctly routing them to EL2.)
Use the correct target EL when generating the code to take the trap.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2226
Fixes: 049edada5e93df ("target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240325133116.2075362-1-peter.maydell@linaro.org
(cherry picked from commit fbe5ac5671a9cfcc7f4aee9a5fac7720eea08876)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
While the 8-bit input elements are sequential in the input vector,
the 32-bit output elements are not sequential in the output matrix.
Do not attempt to compute 2 32-bit outputs at the same time.
Cc: qemu-stable@nongnu.org
Fixes: 23a5e3859f5 ("target/arm: Implement SME integer outer product")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2083
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240305163931.242795-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit d572bcb222010b38b382871a23b2f38e2c3f4d2d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The TBI and TCMA bits are located within mtedesc, not desc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 855f94eca80c85a99f459e36684ea2f98f6a3243)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
These functions "use the standard load helpers", but
fail to clean_data_tbi or populate mtedesc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 623507ccfcfebb0f10229ae5de3f85a27fb615a7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Share code that creates mtedesc and embeds within simd_desc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 96fcc9982b4aad7aced7fbff046048bbccc6cb0c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
When we added SVE_MTEDESC_SHIFT, we effectively limited the
maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining
bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored
fits within the field (expecting 8 * 4 - 1 == 31, exact fit).
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit b12a7671b6099a26ce5d5ab09701f151e21c112c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The field is encoded as [0-3], which is convenient for
indexing our array of function pointers, but the true
value is [1-4]. Adjust before calling do_mem_zpa.
Add an assert, and move the comment re passing ZT to
the helper back next to the relevant code.
Cc: qemu-stable@nongnu.org
Fixes: 206adacfb8d ("target/arm: Add mte helpers for sve scalar + int loads")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 64c6e7444dff64b42d11b836b9aec9acfbe8ecc2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
In commit 1b7bc9b5c8bf374dd we changed handle_vec_simd_sqshrn() so
that instead of starting with a 0 value and depositing in each new
element from the narrowing operation, it instead started with the raw
result of the narrowing operation of the first element.
This is fine in the vector case, because the deposit operations for
the second and subsequent elements will always overwrite any higher
bits that might have been in the first element's result value in
tcg_rd. However in the scalar case we only go through this loop
once. The effect is that for a signed narrowing operation, if the
result is negative then we will now return a value where the bits
above the first element are incorrectly 1 (because the narrowfn
returns a sign-extended result, not one that is truncated to the
element size).
Fix this by using an extract operation to get exactly the correct
bits of the output of the narrowfn for element 1, instead of a
plain move.
Cc: qemu-stable@nongnu.org
Fixes: 1b7bc9b5c8bf374dd3 ("target/arm: Avoid tcg_const_ptr in handle_vec_simd_sqshrn")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2089
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240123153416.877308-1-peter.maydell@linaro.org
(cherry picked from commit 6fffc8378562c7fea6290c430b4f653f830a4c1a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Perform the loop increment unconditionally, not nested
within the predication.
Cc: qemu-stable@nongnu.org
Fixes: 3916841ac75 ("target/arm: Implement FMOPA, FMOPS (widening)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1985
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231117193135.1180657-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
I noticed that Neoverse-V1 has FEAT_RNG enabled so let enable it also on
Neoverse-N2.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231114103443.1652308-1-marcin.juszkiewicz@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fixes: 179e9a3baccc "target/arm: Define new TB flag for ATA0"
Fixes: 5d7b37b5f675 "target/arm: Implement the CPY* instructions"
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
According to the technical reference manual, the Cortex-A9
has a Perfomance Unit Monitor (PMU):
https://developer.arm.com/documentation/100511/0401/performance-monitoring-unit/about-the-performance-monitoring-unit
The Cortex-A8 does also.
We already already define the PMU registers when emulating the
Cortex-A8 and Cortex-A9, because we put them in v7_cp_reginfo[]
rather than guarding them behind ARM_FEATURE_PMU. So the only thing
that setting the feature bit changes is that the registers actually
do something.
Enable ARM_FEATURE_PMU for Cortex-A8 and Cortex-A9, to avoid
this anomaly.
(The A8 and A9 PMU predates the standardisation of ID_DFR0.PerfMon,
so the field there is 0, but the PMU is still present.)
Signed-off-by: Nikita Ostrenkov <n.ostrenkov@gmail.com>
Message-id: 20231112165658.2335-1-n.ostrenkov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message; also enable PMU for A8]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When we are doing a FEAT_MOPS copy that must be performed backwards,
we call mte_mops_probe_rev(), passing it the address of the last byte
in the region we are probing. However, allocation_tag_mem_probe()
wants the address of the first byte to get the tag memory for.
Because we passed it (ptr, size) we could incorrectly trip the
allocation_tag_mem_probe() check for "does this access run across to
the following page", and if that following page happened not to be
valid then we would assert.
We know we will always be only dealing with a single page because the
code that calls mte_mops_probe_rev() ensures that. We could make
mte_mops_probe_rev() pass 'ptr - (size - 1)' to
allocation_tag_mem_probe(), but then we would have to adjust the
returned 'mem' pointer to get back to the tag RAM for the last byte
of the region. It's simpler to just pass in a size of 1 byte,
because we know that allocation_tag_mem_probe() in pure-probe
single-page mode doesn't care about the size.
Fixes: 69c51dc3723b ("target/arm: Implement MTE tag-checking functions for FEAT_MOPS copies")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231110162546.2192512-1-peter.maydell@linaro.org
|
|
AArch64 permits code at EL3 to use the HVC instruction; however the
exception we take should go to EL3, not down to EL2 (see the pseudocode
AArch64.CallHypervisor()). Fix the target EL.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20231109151917.1925107-1-peter.maydell@linaro.org
|
|
In commit be23a049 in the conversion to decodetree we broke the
decoding of the immediate value in the LDRA instruction. This should
be a 10 bit signed value that is scaled by 8, but in the conversion
we incorrectly ended up scaling it only by 2. Fix the scaling
factor.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1970
Fixes: be23a049 ("target/arm: Convert load (pointer auth) insns to decodetree")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231106113445.1163063-1-peter.maydell@linaro.org
|
|
The previous change missed updating one of the increments and
one of the MemOps. Add a test case for all vector lengths.
Cc: qemu-stable@nongnu.org
Fixes: e6dd5e782be ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231031143215.29764-1-richard.henderson@linaro.org
[PMM: fixed checkpatch nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Most of the registers used by the FEAT_MOPS instructions cannot use
31 as a register field value; this is CONSTRAINED UNPREDICTABLE to
NOP or UNDEF (we UNDEF). However, it is permitted for the "source
value" register for the memset insns SET* to be 31, which (as usual
for most data-processing insns) means it should be the zero register
XZR. We forgot to handle this case, with the effect that trying to
set memory to zero with a "SET* Xd, Xn, XZR" sets the memory to
the value that happens to be in the low byte of SP.
Handle XZR when getting the SET* data value from the register file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030174000.3792225-4-peter.maydell@linaro.org
|
|
In commit 442c9d682c94fc2 when we converted the ERET, ERETAA, ERETAB
instructions to decodetree, the conversion accidentally lost the
correct setting of the syndrome register when taking a trap because
of the FEAT_FGT HFGITR_EL1.ERET bit. Instead of reporting a correct
full syndrome value with the EC and IL bits, we only reported the low
two bits of the syndrome, because the call to syn_erettrap() got
dropped.
Fix the syndrome values for these traps by reinstating the
syn_erettrap() calls.
Fixes: 442c9d682c94fc2 ("target/arm: Convert ERET, ERETAA, ERETAB to decodetree")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024172438.2990945-1-peter.maydell@linaro.org
|
|
The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot of source files, most of which don't need these functions.
Move the feature test functions to their own header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-2-peter.maydell@linaro.org
|
|
Implement a model of the Neoverse N2 CPU. This is an Armv9.0-A
processor very similar to the Cortex-A710. The differences are:
* no FEAT_EVT
* FEAT_DGH (data gathering hint)
* FEAT_NV (not yet implemented in QEMU)
* Statistical Profiling Extension (not implemented in QEMU)
* 48 bit physical address range, not 40
* CTR_EL0.DIC = 1 (no explicit icache cleaning needed)
* PMCR_EL0.N = 6 (always 6 PMU counters, not 20)
Because it has 48-bit physical address support, we can use
this CPU in the sbsa-ref board as well as the virt board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230915185453.1871167-3-peter.maydell@linaro.org
|
|
Correct a couple of minor errors in the Cortex-A710 definition:
* ID_AA64DFR0_EL1.DebugVer is 9 (indicating Armv8.4 debug architecture)
* ID_AA64ISAR1_EL1.APA is 5 (indicating more PAuth support)
* there is an IMPDEF CPUCFR_EL1, like that on the Neoverse-N1
Fixes: e3d45c0a89576 ("target/arm: Implement cortex-a710")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230915185453.1871167-2-peter.maydell@linaro.org
|
|
The ext_and_shift_reg helper does this plus a shift.
The non-zero check for shift count is duplicate to
the one done within tcg_gen_shli_i64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
FEAT_HPMN0 is a small feature which defines that it is valid for
MDCR_EL2.HPMN to be set to 0, meaning "no PMU event counters provided
to an EL1 guest" (previously this setting was reserved). QEMU's
implementation almost gets HPMN == 0 right, but we need to fix
one check in pmevcntr_is_64_bit(). That is enough for us to
advertise the feature in the 'max' CPU.
(We don't need to make the behaviour conditional on feature
presence, because the FEAT_HPMN0 behaviour is within the range
of permitted UNPREDICTABLE behaviour for a non-FEAT_HPMN0
implementation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230921185445.3339214-1-peter.maydell@linaro.org
|
|
For the Thumb T32 encoding of LDM, if only a single register is
specified in the register list this instruction is UNPREDICTABLE,
with the following choices:
* instruction UNDEFs
* instruction is a NOP
* instruction loads a single register
* instruction loads an unspecified set of registers
Currently we choose to UNDEF (a behaviour chosen in commit
4b222545dbf30 in 2019; previously we treated it as "load the
specified single register").
Unfortunately there is real world code out there (which shipped in at
least Android 11, 12 and 13) which incorrectly uses this
UNPREDICTABLE insn on the assumption that it does a single register
load, which is (presumably) what it happens to do on real hardware,
and is also what it does on the equivalent A32 encoding.
Revert to the pre-4b222545dbf30 behaviour of not UNDEFing
for this T32 encoding.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1799
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230927101853.39288-1-peter.maydell@linaro.org
|
|
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
TARGET_PAGE_ENTRY_EXTRA is a macro that allows guests to specify additional
fields for caching with the full TLB entry. This macro is replaced with
a union in CPUTLBEntryFull, thus making CPUTLB target-agnostic at the
cost of slightly inflated CPUTLBEntryFull for non-arm guests.
Note, this is needed to ensure that fields in CPUTLB don't vary in
offset between various targets.
(arm is the only guest actually making use of this feature.)
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Fix:
target/arm/tcg/translate-m-nocp.c: In function ‘gen_M_fp_sysreg_read’:
target/arm/tcg/translate-m-nocp.c:509:18: warning: declaration of ‘tmp’ shadows a previous local [-Wshadow=compatible-local]
509 | TCGv_i32 tmp = load_cpu_field(v7m.fpdscr[M_REG_NS]);
| ^~~
target/arm/tcg/translate-m-nocp.c:433:14: note: shadowed declaration is here
433 | TCGv_i32 tmp;
| ^~~
---
target/arm/tcg/mve_helper.c: In function ‘helper_mve_vqshlsb’:
target/arm/tcg/mve_helper.c:1259:19: warning: declaration of ‘r’ shadows a previous local [-Wshadow=compatible-local]
1259 | typeof(N) r = FN(N, (int8_t)(M), sizeof(N) * 8, ROUND, &su32); \
| ^
target/arm/tcg/mve_helper.c:1267:5: note: in expansion of macro ‘WRAP_QRSHL_HELPER’
1267 | WRAP_QRSHL_HELPER(do_sqrshl_bhs, N, M, false, satp)
| ^~~~~~~~~~~~~~~~~
target/arm/tcg/mve_helper.c:927:22: note: in expansion of macro ‘DO_SQSHL_OP’
927 | TYPE r = FN(n[H##ESIZE(e)], m[H##ESIZE(e)], &sat); \
| ^~
target/arm/tcg/mve_helper.c:945:5: note: in expansion of macro ‘DO_2OP_SAT’
945 | DO_2OP_SAT(OP##b, 1, int8_t, FN) \
| ^~~~~~~~~~
target/arm/tcg/mve_helper.c:1277:1: note: in expansion of macro ‘DO_2OP_SAT_S’
1277 | DO_2OP_SAT_S(vqshls, DO_SQSHL_OP)
| ^~~~~~~~~~~~
---
target/arm/tcg/mve_helper.c: In function ‘do_sqrshl48_d’:
target/arm/tcg/mve_helper.c:2463:17: warning: declaration of ‘extval’ shadows a previous local [-Wshadow=compatible-local]
2463 | int64_t extval = sextract64(src << shift, 0, 48);
| ^~~~~~
target/arm/tcg/mve_helper.c:2443:18: note: shadowed declaration is here
2443 | int64_t val, extval;
| ^~~~~~
---
target/arm/tcg/mve_helper.c: In function ‘do_uqrshl48_d’:
target/arm/tcg/mve_helper.c:2495:18: warning: declaration of ‘extval’ shadows a previous local [-Wshadow=compatible-local]
2495 | uint64_t extval = extract64(src << shift, 0, 48);
| ^~~~~~
target/arm/tcg/mve_helper.c:2479:19: note: shadowed declaration is here
2479 | uint64_t val, extval;
| ^~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-3-philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Enable FEAT_MOPS on the AArch64 'max' CPU, and add it to
the list of features we implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-13-peter.maydell@linaro.org
|
|
The FEAT_MOPS CPY* instructions implement memory copies. These
come in both "always forwards" (memcpy-style) and "overlap OK"
(memmove-style) flavours.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-12-peter.maydell@linaro.org
|
|
The FEAT_MOPS memory copy operations need an extra helper routine
for checking for MTE tag checking failures beyond the ones we
already added for memory set operations:
* mte_mops_probe_rev() does the same job as mte_mops_probe(), but
it checks tags starting at the provided address and working
backwards, rather than forwards
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-11-peter.maydell@linaro.org
|
|
The FEAT_MOPS SETG* instructions are very similar to the SET*
instructions, but as well as setting memory contents they also
set the MTE tags. They are architecturally required to operate
on tag-granule aligned regions only.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-10-peter.maydell@linaro.org
|
|
Currently the only tag-setting instructions always do so in the
context of the current EL, and so we only need one ATA bit in the TB
flags. The FEAT_MOPS SETG instructions include ones which set tags
for a non-privileged access, so we now also need the equivalent "are
tags enabled?" information for EL0.
Add the new TB flag, and convert the existing 'bool ata' field in
DisasContext to a 'bool ata[2]' that can be indexed by the is_unpriv
bit in an instruction, similarly to mte[2].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-9-peter.maydell@linaro.org
|
|
Implement the SET* instructions which collectively implement a
"memset" operation. These come in a set of three, eg SETP
(prologue), SETM (main), SETE (epilogue), and each of those has
different flavours to indicate whether memory accesses should be
unpriv or non-temporal.
This commit does not include the "memset with tag setting"
SETG* instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-8-peter.maydell@linaro.org
|
|
The FEAT_MOPS instructions need a couple of helper routines that
check for MTE tag failures:
* mte_mops_probe() checks whether there is going to be a tag
error in the next up-to-a-page worth of data
* mte_check_fail() is an existing function to record the fact
of a tag failure, which we need to make global so we can
call it from helper-a64.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-7-peter.maydell@linaro.org
|
|
For the FEAT_MOPS operations, the existing allocation_tag_mem()
function almost does what we want, but it will take a watchpoint
exception even for an ra == 0 probe request, and it requires that the
caller guarantee that the memory is accessible. For FEAT_MOPS we
want a function that will not take any kind of exception, and will
return NULL for the not-accessible case.
Rename allocation_tag_mem() to allocation_tag_mem_probe() and add an
extra 'probe' argument that lets us distinguish these cases;
allocation_tag_mem() is now a wrapper that always passes 'false'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-6-peter.maydell@linaro.org
|
|
In every place that we call the get_a64_user_mem_index() function
we do it like this:
memidx = a->unpriv ? get_a64_user_mem_index(s) : get_mem_index(s);
Refactor so the caller passes in the bool that says whether they
want the 'unpriv' or 'normal' mem_index rather than having to
do the ?: themselves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230912140434.1333369-4-peter.maydell@linaro.org
|
|
The LDRT/STRT "unprivileged load/store" instructions behave like
normal ones if executed at EL0. We handle this correctly for
the load/store semantics, but get the MTE checking wrong.
We always look at s->mte_active[is_unpriv] to see whether we should
be doing MTE checks, but in hflags.c when we set the TB flags that
will be used to fill the mte_active[] array we only set the
MTE0_ACTIVE bit if UNPRIV is true (i.e. we are not at EL0).
This means that a LDRT at EL0 will see s->mte_active[1] as 0,
and will not do MTE checks even when MTE is enabled.
To avoid the translate-time code having to do an explicit check on
s->unpriv to see if it is OK to index into the mte_active[] array,
duplicate MTE_ACTIVE into MTE0_ACTIVE when UNPRIV is false.
(This isn't a very serious bug because generally nobody executes
LDRT/STRT at EL0, because they have no use there.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-2-peter.maydell@linaro.org
|
|
The allocation_tag_mem() function takes an argument tag_size,
but it never uses it. Remove the argument. In mte_probe_int()
in particular this also lets us delete the code computing
the value we were passing in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
FEAT_HBC (Hinted conditional branches) provides a new instruction
BC.cond, which behaves exactly like the existing B.cond except
that it provides a hint to the branch predictor about the
likely behaviour of the branch.
Since QEMU does not implement branch prediction, we can treat
this identically to B.cond.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
*: Delete checks for old host definitions
tcg/loongarch64: Generate LSX instructions
fpu: Add conversions between bfloat16 and [u]int8
fpu: Handle m68k extended precision denormals properly
accel/tcg: Improve cputlb i/o organization
accel/tcg: Simplify tlb_plugin_lookup
accel/tcg: Remove false-negative halted assertion
tcg: Add gvec compare with immediate and scalar operand
tcg/aarch64: Emit BTI insns at jump landing pads
[Resolved conflict between CPUINFO_PMULL and CPUINFO_BTI.
--Stefan]
* tag 'pull-tcg-20230915-2' of https://gitlab.com/rth7680/qemu: (39 commits)
tcg: Map code_gen_buffer with PROT_BTI
tcg/aarch64: Emit BTI insns at jump landing pads
util/cpuinfo-aarch64: Add CPUINFO_BTI
tcg: Add tcg_out_tb_start backend hook
fpu: Handle m68k extended precision denormals properly
fpu: Add conversions between bfloat16 and [u]int8
accel/tcg: Introduce do_st16_mmio_leN
accel/tcg: Introduce do_ld16_mmio_beN
accel/tcg: Merge io_writex into do_st_mmio_leN
accel/tcg: Merge io_readx into do_ld_mmio_beN
accel/tcg: Replace direct use of io_readx/io_writex in do_{ld,st}_1
accel/tcg: Merge cpu_transaction_failed into io_failed
plugin: Simplify struct qemu_plugin_hwaddr
accel/tcg: Use CPUTLBEntryFull.phys_addr in io_failed
accel/tcg: Split out io_prepare and io_failed
accel/tcg: Simplify tlb_plugin_lookup
target/arm: Use tcg_gen_gvec_cmpi for compare vs 0
tcg: Add gvec compare with immediate and scalar operand
tcg/loongarch64: Implement 128-bit load & store
tcg/loongarch64: Lower rotli_vec to vrotri
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230831030904.1194667-3-richard.henderson@linaro.org>
|
|
Use generic routine for 64-bit carry-less multiply.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Use generic routines for 32-bit carry-less multiply.
Remove our local version of pmull_d.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Use generic routines for 16-bit carry-less multiply.
Remove our local version of pmull_w.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Use generic routines for 8-bit carry-less multiply.
Remove our local version of pmull_h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
https://github.com/alistair23/qemu into staging
First RISC-V PR for 8.2
* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
* Add zmmul isa string
* Add smepmp isa string
* Fix page_check_range use in fault-only-first
* Use existing lookup tables for MixColumns
* Add RISC-V vector cryptographic instruction set support
* Implement WARL behaviour for mcountinhibit/mcounteren
* Add Zihintntl extension ISA string to DTS
* Fix zfa fleq.d and fltq.d
* Fix upper/lower mtime write calculation
* Make rtc variable names consistent
* Use abi type for linux-user target_ucontext
* Add RISC-V KVM AIA Support
* Fix riscv,pmu DT node path in the virt machine
* Update CSR bits name for svadu extension
* Mark zicond non-experimental
* Fix satp_mode_finalize() when satp_mode.supported = 0
* Fix non-KVM --enable-debug build
* Add new extensions to hwprobe
* Use accelerated helper for AES64KS1I
* Allocate itrigger timers only once
* Respect mseccfg.RLB for pmpaddrX changes
* Align the AIA model to v1.0 ratified spec
* Don't read the CSR in riscv_csrrw_do64
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmT+ttMACgkQr3yVEwxT
# gBN/rg/+KhOvL9xWSNb8pzlIsMQHLvndno0Sq5b9Rb/o5z1ekyYfyg6712N3JJpA
# TIfZzOIW7oYZV8gHyaBtOt8kIbrjwzGB2rpCh4blhm+yNZv7Ym9Ko6AVVzoUDo7k
# 2dWkLnC+52/l3SXGeyYMJOlgUUsQMwjD6ykDEr42P6DfVord34fpTH7ftwSasO9K
# 35qJQqhUCgB3fMzjKTYICN6Rm1UluijTjRNXUZXC0XZlr+UKw2jT/UsybbWVXyNs
# SmkRtF1MEVGvw+b8XOgA/nG1qVCWglTMcPvKjWMY+cY9WLM6/R9nXAV8OL/JPead
# v1LvROJNukfjNtDW6AOl5/svOJTRLbIrV5EO7Hlm1E4kftGmE5C+AKZZ/VT4ucUK
# XgqaHoXh26tFEymVjzbtyFnUHNv0zLuGelTnmc5Ps1byLSe4lT0dBaJy6Zizg0LE
# DpTR7s3LpyV3qB96Xf9bOMaTPsekUjD3dQI/3X634r36+YovRXapJDEDacN9whbU
# BSZc20NoM5UxVXFTbELQXolue/X2BRLxpzB+BDG8/cpu/MPgcCNiOZaVrr/pOo33
# 6rwwrBhLSCfYAXnJ52qTUEBz0Z/FnRPza8AU/uuRYRFk6JhUXIonmO6xkzsoNKuN
# QNnih/v1J+1XqUyyT2InOoAiTotzHiWgKZKaMfAhomt2j/slz+A=
# =aqcx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Sep 2023 02:42:27 EDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu: (45 commits)
target/riscv: don't read CSR in riscv_csrrw_do64
target/riscv: Align the AIA model to v1.0 ratified spec
target/riscv/pmp.c: respect mseccfg.RLB for pmpaddrX changes
target/riscv: Allocate itrigger timers only once
target/riscv: Use accelerated helper for AES64KS1I
linux-user/riscv: Add new extensions to hwprobe
hw/intc/riscv_aplic.c fix non-KVM --enable-debug build
hw/riscv/virt.c: fix non-KVM --enable-debug build
riscv: zicond: make non-experimental
target/riscv: fix satp_mode_finalize() when satp_mode.supported = 0
target/riscv: Update CSR bits name for svadu extension
hw/riscv: virt: Fix riscv,pmu DT node path
target/riscv: select KVM AIA in riscv virt machine
target/riscv: update APLIC and IMSIC to support KVM AIA
target/riscv: Create an KVM AIA irqchip
target/riscv: check the in-kernel irqchip support
target/riscv: support the AIA device emulation with KVM enabled
linux-user/riscv: Use abi type for target_ucontext
hw/intc: Make rtc variable names consistent
hw/intc: Fix upper/lower mtime write calculation
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Allows sharing of sm4_subword between different targets.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-14-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
