| Age | Commit message (Collapse) | Author |
|---|
|
The LDG instruction loads the tag from a memory address (identified
by [Xn + offset]), and then merges that tag into the destination
register Xt. We implemented this correctly for the case when
allocation tags are enabled, but didn't get it right when ATA=0:
instead of merging the tag bits into Xt, we merged them into the
memory address [Xn + offset] and then set Xt to that.
Merge the tag bits into the old Xt value, as they should be.
Cc: qemu-stable@nongnu.org
Fixes: c15294c1e36a7dd9b25 ("target/arm: Implement LDG, STG, ST2G instructions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The atomic memory operations are supposed to return the old memory
data value in the destination register. This value is not
sign-extended, even if the operation is the signed minimum or
maximum. (In the pseudocode for the instructions the returned data
value is passed to ZeroExtend() to create the value in the register.)
We got this wrong because we were doing a 32-to-64 zero extend on the
result for 8 and 16 bit data values, rather than the correct amount
of zero extension.
Fix the bug by using ext8u and ext16u for the MO_8 and MO_16 data
sizes rather than ext32u.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-2-peter.maydell@linaro.org
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Push the mte check behind the exclusive_addr check.
Document the several ways that we are still out of spec
with this implementation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
FEAT_LSE2 only requires that atomic operations not cross a
16-byte boundary. Ordered operations may be completely
unaligned if SCTLR.nAA is set.
Because this alignment check is so special, do it by hand.
Make sure not to keep TCG temps live across the branch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fixes a bug in that with SCTLR.A set, we should raise any
alignment fault before raising any MTE check fault.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Pass the individual memop to gen_mte_checkN.
For the moment, do nothing with it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Pass the completed memop to gen_mte_check1_mmuidx.
For the moment, do nothing more than extract the size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This is required for LSE2, where the pair must be treated atomically if
it does not cross a 16-byte boundary. But it simplifies the code to do
this always.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
No need to duplicate this check across multiple call sites.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Round len_align to 16 instead of 8, handling an odd 8-byte as part
of the tail. Use MO_ATOM_NONE to indicate that all of these memory
ops have only byte atomicity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This fixes a bug in that these two insns should have been using atomic
16-byte stores, since MTE is ARMv8.5 and LSE2 is mandatory from ARMv8.4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
While we don't require 16-byte atomicity here, using a single larger
operation simplifies the code. Introduce finalize_memop_asimd for this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
While we don't require 16-byte atomicity here, using a single larger
load simplifies the code, and makes it a closer match to STXP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Let finalize_memop_atom be the new basic function, with
finalize_memop and finalize_memop_pair testing FEAT_LSE2
to apply the appropriate atomicity.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This had been pulled in via exec/translator.h,
but the include of exec-all.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Move most includes from *translate*.c to translate.h, ensuring
that we get the ordering correct. Ensure cpu.h is first.
Use disas/disas.h instead of exec/log.h.
Drop otherwise unused includes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Create helper-proto-common.h without the target specific portion.
Use that in tcg-op-common.h. Include helper-proto.h in target/arm
and target/hexagon before helper-info.c.inc; all other targets are
already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Create helper-gen-common.h without the target specific portion.
Use that in tcg-op-common.h. Reorg headers in target/arm to
ensure that helper-gen.h is included before helper-info.c.inc.
All other targets are already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This had been included via tcg-op-common.h via tcg-op.h,
but that is going away.
It is needed for inlines within translator.h, so we might as well
do it there and not individually in each translator c file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
For M-profile, there is no guest-facing A-profile format FSR, but we
still use the env->exception.fsr field to pass fault information from
the point where a fault is raised to the code in
arm_v7m_cpu_do_interrupt() which interprets it and sets the M-profile
specific fault status registers. So it doesn't matter whether we
fill in env->exception.fsr in the short format or the LPAE format, as
long as both sides agree. As it happens arm_v7m_cpu_do_interrupt()
assumes short-form.
In compute_fsr_fsc() we weren't explicitly choosing short-form for
M-profile, but instead relied on it falling out in the wash because
arm_s1_regime_using_lpae_format() would be false. This was broken in
commit 452c67a4 when we added v8R support, because we said "PMSAv8 is
always LPAE format" (as it is for v8R), forgetting that we were
implicitly using this code path on M-profile. At that point we would
hit a g_assert_not_reached():
ERROR:../../target/arm/internals.h:549:arm_fi_to_lfsc: code should not be reached
#7 0x0000555555e055f7 in arm_fi_to_lfsc (fi=0x7fffecff9a90) at ../../target/arm/internals.h:549
#8 0x0000555555e05a27 in compute_fsr_fsc (env=0x555557356670, fi=0x7fffecff9a90, target_el=1, mmu_idx=1, ret_fsc=0x7fffecff9a1c)
at ../../target/arm/tlb_helper.c:95
#9 0x0000555555e05b62 in arm_deliver_fault (cpu=0x555557354800, addr=268961344, access_type=MMU_INST_FETCH, mmu_idx=1, fi=0x7fffecff9a90)
at ../../target/arm/tlb_helper.c:132
#10 0x0000555555e06095 in arm_cpu_tlb_fill (cs=0x555557354800, address=268961344, size=1, access_type=MMU_INST_FETCH, mmu_idx=1, probe=false, retaddr=0)
at ../../target/arm/tlb_helper.c:260
The specific assertion changed when commit fcc7404eff24b4c added
"assert not M-profile" to arm_is_secure_below_el3(), because the
conditions being checked in compute_fsr_fsc() include
arm_el_is_aa64(), which will end up calling arm_is_secure_below_el3()
and asserting before we try to call arm_fi_to_lfsc():
#7 0x0000555555efaf43 in arm_is_secure_below_el3 (env=0x5555574665a0) at ../../target/arm/cpu.h:2396
#8 0x0000555555efb103 in arm_is_el2_enabled (env=0x5555574665a0) at ../../target/arm/cpu.h:2448
#9 0x0000555555efb204 in arm_el_is_aa64 (env=0x5555574665a0, el=1) at ../../target/arm/cpu.h:2509
#10 0x0000555555efbdfd in compute_fsr_fsc (env=0x5555574665a0, fi=0x7fffecff99e0, target_el=1, mmu_idx=1, ret_fsc=0x7fffecff996c)
Avoid the assertion and the incorrect FSR format selection by
explicitly making M-profile use the short-format in this function.
Fixes: 452c67a42704 ("target/arm: Enable TTBCR_EAE for ARMv8-R AArch32")a
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1658
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230523131726.866635-1-peter.maydell@linaro.org
|
|
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
The only use of the functions with explicit endianness was in
target/sparc64, and that was only to satisfy the assert: the
correct endianness is already built into memop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Convert the exception-return insns ERET, ERETA and ERETB to
decodetree. These were the last insns left in the legacy
decoder function disas_uncond_reg_b(), which allows us to
remove it.
The old decoder explicitly decoded the DRPS instruction,
only in order to call unallocated_encoding() on it, exactly
as would have happened if it hadn't decoded it. This is
because this insn always UNDEFs unless the CPU is in
halting-debug state, which we don't emulate. So we list
the pattern in a comment in a64.decode, but don't actively
decode it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-21-peter.maydell@linaro.org
|
|
Convert the last four BR-with-pointer-auth insns to decodetree.
The remaining cases in the outer switch in disas_uncond_b_reg()
all return early rather than leaving the case statement, so we
can delete the now-unused code at the end of that function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-20-peter.maydell@linaro.org
|
|
Convert the single-register pointer-authentication variants of BR,
BLR, RET to decodetree. (BRAA/BLRAA are in a different branch of
the legacy decoder and will be dealt with in the next commit.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-19-peter.maydell@linaro.org
|
|
Convert the simple (non-pointer-auth) BR, BLR and RET insns
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-18-peter.maydell@linaro.org
|
|
Convert the immediate conditional branch insn B.cond to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-17-peter.maydell@linaro.org
|
|
Convert the test-and-branch-immediate insns TBZ and TBNZ
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-16-peter.maydell@linaro.org
|
|
Convert the compare-and-branch-immediate insns CBZ and CBNZ
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-15-peter.maydell@linaro.org
|
|
Convert the unconditional branch immediate insns B and BL to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-14-peter.maydell@linaro.org
|
|
Convert the EXTR instruction to decodetree (this is the
only one in the 'Extract" class). This is the last of
the dp-immediate insns in the legacy decoder, so we
can now remove disas_data_proc_imm().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-13-peter.maydell@linaro.org
|
|
Convert the BFM, SBFM, UBFM instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-12-peter.maydell@linaro.org
[PMM: Rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the MON, MOVZ, MOVK instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-11-peter.maydell@linaro.org
[PMM: Rebased]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the ADD, ORR, EOR, ANDS (immediate) instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-10-peter.maydell@linaro.org
[PMM: rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Use the bitops.h macro rather than rolling our own here.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-9-peter.maydell@linaro.org
|
|
Convert the ADDG and SUBG (immediate) instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-8-peter.maydell@linaro.org
[PMM: Rebased; use TRANS_FEAT()]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the ADD and SUB (immediate) instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-7-peter.maydell@linaro.org
[PMM: Rebased; adjusted to use translate.h's TRANS macro]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Split out specific 32-bit and 64-bit functions.
These carry the same signature as tcg_gen_add_i64,
and so will be easier to pass as callbacks.
Retain gen_add_CC and gen_sub_CC during conversion.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-6-peter.maydell@linaro.org
[PMM: rebased]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the ADR and ADRP instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-5-peter.maydell@linaro.org
[PMM: Rebased]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The SVE and SME decode is already done by decodetree. Pull the calls
to these decoders out of the legacy decoder. This doesn't change
behaviour because all the patterns in sve.decode and sme.decode
already require the bits that the legacy decoder is decoding to have
the correct values.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-4-peter.maydell@linaro.org
|
|
The A64 translator uses a hand-written decoder for everything except
SVE or SME. It's fairly well structured, but it's becoming obvious
that it's still more painful to add instructions to than the A32
translator, because putting a new instruction into the right place in
a hand-written decoder is much harder than adding new instruction
patterns to a decodetree file.
As the first step in conversion to decodetree, create the skeleton of
the decodetree decoder; where it does not handle instructions we will
fall back to the legacy decoder (which will be for everything at the
moment, since there are no patterns in a64.decode).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-3-peter.maydell@linaro.org
|
|
Split out all of the decode stuff from aarch64_tr_translate_insn.
Call it disas_a64_legacy to indicate it will be replaced.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-2-peter.maydell@linaro.org
[PMM: Rebased]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
If vd == vm, copy vm to scratch, so that we can pre-zero
the output and still access the gather indicies.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1612
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230504104232.1877774-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In check_s2_mmu_setup() we have a check that is attempting to
implement the part of AArch64.S2MinTxSZ that is specific to when EL1
is AArch32:
if !s1aarch64 then
// EL1 is AArch32
min_txsz = Min(min_txsz, 24);
Unfortunately we got this wrong in two ways:
(1) The minimum txsz corresponds to a maximum inputsize, but we got
the sense of the comparison wrong and were faulting for all
inputsizes less than 40 bits
(2) We try to implement this as an extra check that happens after
we've done the same txsz checks we would do for an AArch64 EL1, but
in fact the pseudocode is *loosening* the requirements, so that txsz
values that would fault for an AArch64 EL1 do not fault for AArch32
EL1, because it does Min(old_min, 24), not Max(old_min, 24).
You can see this also in the text of the Arm ARM in table D8-8, which
shows that where the implemented PA size is less than 40 bits an
AArch32 EL1 is still OK with a configured stage2 T0SZ for a 40 bit
IPA, whereas if EL1 is AArch64 then the T0SZ must be big enough to
constrain the IPA to the implemented PA size.
Because of part (2), we can't do this as a separate check, but
have to integrate it into aa64_va_parameters(). Add a new argument
to that function to indicate that EL1 is 32-bit. All the existing
callsites except the one in get_phys_addr_lpae() can pass 'false',
because they are either doing a lookup for a stage 1 regime or
else they don't care about the tsz/tsz_oob fields.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1627
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230509092059.3176487-1-peter.maydell@linaro.org
|
|
While we cannot move the main "helper.h" out of target/arm/,
due to usage by generic code, we can move the sub-includes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230504110412.1892411-3-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
