| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit f7fb73b8cdd3f77e26f9fcff8cf24ff1b58d200f.
This change turned out to be a bit half-baked, and doesn't
work with KVM, which fails with the error:
"qemu-system-aarch64: Failed to retrieve host CPU features"
because KVM does not allow accessing of the PMCR_EL0 value in
the scratch "query CPU ID registers" VM unless we have first
set the KVM_ARM_VCPU_PMU_V3 feature on the VM.
Revert the change for 6.0.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20210331154822.23332-1-peter.maydell@linaro.org
|
|
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters for Cortex-A53, A57, A72,
A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
Cortex-R5 goes down to 3.
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20210311165947.27470-1-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84ce:
"target/arm: Remove KVM support for 32-bit Arm hosts").
A KVM-only build won't be able to run TCG cpus, move the
v7A CPU definitions to cpu_tcg.c.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210306151801.2388182-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
IDAU is specific to M-profile. KVM only supports A-profile.
Restrict this interface to TCG, as it is pointless (and
confusing) on a KVM-only build.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210221222617.2579610-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210204163931.7358-10-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: wrapped target code in CONFIG_TCG]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210204163931.7358-6-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Now that we have implemented all the features needed by the v8.1M
architecture, we can add the model of the Cortex-M55. This is the
configuration without MVE support; we'll add MVE later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-5-peter.maydell@linaro.org
|
|
Give the Cortex-M0 ID register values corresponding to its
implemented behaviour. These will not be guest-visible but will be
used to govern the behaviour of QEMU's emulation. We use the same
values that the Cortex-M3 does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-5-peter.maydell@linaro.org
|
|
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters
sub-struct. We're going to want id_pfr1 for an isar_features
check, and moving both at the same time avoids an odd
inconsistency.
Changes other than the ones to cpu.h and kvm64.c made
automatically with:
perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
|
|
GDB's remote protocol requires M-profile cores to use the feature
name 'org.gnu.gdb.arm.m-profile' instead of the 'org.gnu.gdb.arm.core'
feature used for A- and R-profile cores. We weren't doing this, which
meant GDB treated our M-profile cores like A-profile ones. This mostly
doesn't matter, but for instance means that it doesn't correctly
handle backtraces where an M-profile exception frame is involved.
Ship a copy of GDB's arm-m-profile.xml and use it on the M-profile
cores. The integer registers have the same offsets as the
arm-core.xml, but register 25 is the M-profile XPSR rather than the
A-profile CPSR, so we need to update arm_cpu_gdb_read_register() and
arm_cpu_gdb_write_register() to handle XSPR reads and writes.
Fixes: https://bugs.launchpad.net/qemu/+bug/1877136
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200507134755.13997-1-peter.maydell@linaro.org
|
|
A KVM-only build won't be able to run TCG cpus.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200504172448.9402-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
