aboutsummaryrefslogtreecommitdiff
path: root/target/arm/cpu64.c
AgeCommit message (Collapse)Author
2019-11-01target/arm/kvm: host cpu: Add support for sve<N> propertiesAndrew Jones
Allow cpu 'host' to enable SVE when it's available, unless the user chooses to disable it with the added 'sve=off' cpu property. Also give the user the ability to select vector lengths with the sve<N> properties. We don't adopt 'max' cpu's other sve property, sve-max-vq, because that property is difficult to use with KVM. That property assumes all vector lengths in the range from 1 up to and including the specified maximum length are supported, but there may be optional lengths not supported by the host in that range. With KVM one must be more specific when enabling vector lengths. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Message-id: 20191031142734.8590-10-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-01target/arm/cpu64: max cpu: Support sve properties with KVMAndrew Jones
Extend the SVE vq map initialization and validation with KVM's supported vector lengths when KVM is enabled. In order to determine and select supported lengths we add two new KVM functions for getting and setting the KVM_REG_ARM64_SVE_VLS pseudo-register. This patch has been co-authored with Richard Henderson, who reworked the target/arm/cpu64.c changes in order to push all the validation and auto-enabling/disabling steps into the finalizer, resulting in a nice LOC reduction. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Message-id: 20191031142734.8590-9-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-01target/arm/kvm64: max cpu: Enable SVE when availableAndrew Jones
Enable SVE in the KVM guest when the 'max' cpu type is configured and KVM supports it. KVM SVE requires use of the new finalize vcpu ioctl, so we add that now too. For starters SVE can only be turned on or off, getting all vector lengths the host CPU supports when on. We'll add the other SVE CPU properties in later patches. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Beata Michalska <beata.michalska@linaro.org> Message-id: 20191031142734.8590-7-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-01target/arm/cpu64: max cpu: Introduce sve<N> propertiesAndrew Jones
Introduce cpu properties to give fine control over SVE vector lengths. We introduce a property for each valid length up to the current maximum supported, which is 2048-bits. The properties are named, e.g. sve128, sve256, sve384, sve512, ..., where the number is the number of bits. See the updates to docs/arm-cpu-features.rst for a description of the semantics and for example uses. Note, as sve-max-vq is still present and we'd like to be able to support qmp_query_cpu_model_expansion with guests launched with e.g. -cpu max,sve-max-vq=8 on their command lines, then we do allow sve-max-vq and sve<N> properties to be provided at the same time, but this is not recommended, and is why sve-max-vq is not mentioned in the document. If sve-max-vq is provided then it enables all lengths smaller than and including the max and disables all lengths larger. It also has the side-effect that no larger lengths may be enabled and that the max itself cannot be disabled. Smaller non-power-of-two lengths may, however, be disabled, e.g. -cpu max,sve-max-vq=4,sve384=off provides a guest the vector lengths 128, 256, and 512 bits. This patch has been co-authored with Richard Henderson, who reworked the target/arm/cpu64.c changes in order to push all the validation and auto-enabling/disabling steps into the finalizer, resulting in a nice LOC reduction. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Beata Michalska <beata.michalska@linaro.org> Message-id: 20191031142734.8590-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-01target/arm: Allow SVE to be disabled via a CPU propertyAndrew Jones
Since 97a28b0eeac14 ("target/arm: Allow VFP and Neon to be disabled via a CPU property") we can disable the 'max' cpu model's VFP and neon features, but there's no way to disable SVE. Add the 'sve=on|off' property to give it that flexibility. We also rename cpu_max_get/set_sve_vq to cpu_max_get/set_sve_max_vq in order for them to follow the typical *_get/set_<property-name> pattern. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Beata Michalska <beata.michalska@linaro.org> Message-id: 20191031142734.8590-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20190816' into staging target-arm queue: * target/arm: generate a custom MIDR for -cpu max * hw/misc/zynq_slcr: refactor to use standard register definition * Set ENET_BD_BDU in I.MX FEC controller * target/arm: Fix routing of singlestep exceptions * refactor a32/t32 decoder handling of PC * minor optimisations/cleanups of some a32/t32 codegen * target/arm/cpu64: Ensure kvm really supports aarch64=off * target/arm/cpu: Ensure we can use the pmu with kvm * target/arm: Minor cleanups preparatory to KVM SVE support # gpg: Signature made Fri 16 Aug 2019 14:15:55 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190816: (29 commits) target/arm: Use tcg_gen_extrh_i64_i32 to extract the high word target/arm: Simplify SMMLA, SMMLAR, SMMLS, SMMLSR target/arm: Use tcg_gen_rotri_i32 for gen_swap_half target/arm: Use ror32 instead of open-coding the operation target/arm: Remove redundant shift tests target/arm: Use tcg_gen_deposit_i32 for PKHBT, PKHTB target/arm: Use tcg_gen_extract_i32 for shifter_out_im target/arm/kvm64: Move the get/put of fpsimd registers out target/arm/kvm64: Fix error returns target/arm/cpu: Use div-round-up to determine predicate register array size target/arm/helper: zcr: Add build bug next to value range assumption target/arm/cpu: Ensure we can use the pmu with kvm target/arm/cpu64: Ensure kvm really supports aarch64=off target/arm: Remove helper_double_saturate target/arm: Use unallocated_encoding for aarch32 target/arm: Remove offset argument to gen_exception_bkpt_insn target/arm: Replace offset with pc in gen_exception_internal_insn target/arm: Replace offset with pc in gen_exception_insn target/arm: Replace s->pc with s->base.pc_next target/arm: Remove redundant s->pc & ~1 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16target/arm/cpu64: Ensure kvm really supports aarch64=offAndrew Jones
If -cpu <cpu>,aarch64=off is used then KVM must also be used, and it and the host must support running the vcpu in 32-bit mode. Also, if -cpu <cpu>,aarch64=on is used, then it doesn't matter if kvm is enabled or not. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16target/arm: generate a custom MIDR for -cpu maxAlex Bennée
While most features are now detected by probing the ID_* registers kernels can (and do) use MIDR_EL1 for working out of they have to apply errata. This can trip up warnings in the kernel as it tries to work out if it should apply workarounds to features that don't actually exist in the reported CPU type. Avoid this problem by synthesising our own MIDR value. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190726113950.7499-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-10target/arm: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace arm_env_get_cpu with env_archcpu. The combination CPU(arm_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-23arm: Remove unnecessary includes of hw/arm/arm.hPeter Maydell
The hw/arm/arm.h header now only includes declarations relating to boot.c code, so it is only needed by Arm board or SoC code. Remove some unnecessary inclusions of it from target/arm files and from hw/intc/armv7m_nvic.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190516163857.6430-3-peter.maydell@linaro.org
2019-05-22target/arm: Implement ARMv8.5-RNGRichard Henderson
Use the newly introduced infrastructure for guest random numbers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-05target/arm: Implement ARMv8.5-FRINTRichard Henderson
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190301200501.16533-11-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-05target/arm: Implement ARMv8.5-CondMRichard Henderson
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190301200501.16533-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-05target/arm: Implement ARMv8.4-CondMRichard Henderson
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190301200501.16533-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: fixed up block comment style] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-05target/arm: Implement ARMv8.0-PredInvRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190301200501.16533-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-05target/arm: Implement ARMv8.0-SBRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190301200501.16533-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-28target/arm: Enable ARMv8.2-FHM for -cpu maxRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190219222952.22183-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-21target/arm: Implement ARMv8.3-JSConvRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190215192302.27855-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: fixed a couple of comment typos] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-05target/arm: Enable BTI for -cpu maxRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190128223118.5255-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01target/arm: Always enable pac keys for user-onlyRichard Henderson
Drop the pac properties. This approach cannot work as written because the properties are applied before arm_cpu_reset, which zeros SCTLR_EL1 (amongst everything else). We can re-introduce the properties if they turn out to be useful. But since linux 5.0 enables all of the keys, they may not be. Fixes: 1ae9cfbd470 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01arm: Clarify the logic of set_pc()Julia Suvorova
Until now, the set_pc logic was unclear, which raised questions about whether it should be used directly, applying a value to PC or adding additional checks, for example, set the Thumb bit in Arm cpu. Let's set the set_pc logic for “Configure the PC, as was done in the ELF file” and implement synchronize_with_tb hook for preserving PC to cpu_tb_exec. Signed-off-by: Julia Suvorova <jusual@mail.ru> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190129121817.7109-1-jusual@mail.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0Aaron Lindsay
This commit doesn't add any supported events, but provides the framework for adding them. We store the pm_event structs in a simple array, and provide the mapping from the event numbers to array indexes in the supported_event_map array. Because the value of PMCEID[01] depends upon which events are supported at runtime, generate it dynamically. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-10-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Enable PAuth for user-onlyRichard Henderson
Add 4 attributes that controls the EL1 enable bits, as we may not always want to turn on pointer authentication with -cpu max. However, by default they are enabled. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21target/arm: Enable PAuth for -cpu maxRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07arm: replace instance_post_init()Marc-André Lureau
Replace arm_cpu_post_init() instance callback by calling it from leaf classes, to avoid potential ordering issue with other post_init callbacks. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-13target/arm: Implement the ARMv8.1-LOR extensionRichard Henderson
Provide a trivial implementation with zero limited ordering regions, which causes the LDLAR and STLLR instructions to devolve into the LDAR and STLR instructions from the base ARMv8.0 instruction set. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181210150501.7990-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13target/arm: Implement the ARMv8.1-HPD extensionRichard Henderson
Since the TCR_*.HPD bits were RES0 in ARMv8.0, we can simply interpret the bits as if ARMv8.1-HPD is present without checking. We will need a slightly different check for hpd for aarch32. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181203203839.757-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13target/arm: Move id_aa64mmfr* to ARMISARegistersPeter Maydell
At the same time, define the fields for these registers, and use those defines in arm_pamax(). Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181203203839.757-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: fixed up typo (s/achf/ahcf/) belatedly spotted by RTH] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert v8.2-fp16 from feature bit to aa64pfr0 testRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert sve from feature bit to aa64pfr0 testRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert v8 extensions from feature bits to isar testsRichard Henderson
Most of the v8 extensions are self-contained within the ISAR registers and are not implied by other feature bits, which makes them the easiest to convert. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Move some system registers into a substructureRichard Henderson
Create struct ARMISARegisters, to be accessed during translation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16target/arm: Add the Cortex-A72Edgar E. Iglesias
Add the ARM Cortex-A72. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181011021931.4249-11-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-08target/arm: Handle SVE vector length changes in system modeRichard Henderson
SVE vector length can change when changing EL, or when writing to one of the ZCR_ELn registers. For correctness, our implementation requires that predicate bits that are inaccessible are never set. Which means noticing length changes and zeroing the appropriate register bits. Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181005175350.30752-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Add sve-max-vq cpu property to -cpu maxRichard Henderson
This allows the default (and maximum) vector length to be set from the command-line. Which is extraordinarily helpful in debugging problems depending on vector length without having to bake knowledge of PR_SET_SVE_VL into every guest binary. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29target/arm: Add ID_ISAR6Richard Henderson
This register was added to aa32 state by ARMv8.2. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180629001538.11415-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29target/arm: Prune a57 features from maxRichard Henderson
There is no need to re-set these 9 features already implied by the call to aarch64_a57_initfn. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180629001538.11415-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29target/arm: Implement ARMv8.2-DotProdRichard Henderson
We've already added the helpers with an SVE patch, all that remains is to wire up the aa64 and aa32 translators. Enable the feature within -cpu max for CONFIG_USER_ONLY. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-36-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29target/arm: Enable SVE for aarch64-linux-userRichard Henderson
Enable ARM_FEATURE_SVE for the generic "max" cpu. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-35-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-10target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-onlyRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180508151437.4232-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09target/arm: Make 'any' CPU just an alias for 'max'Peter Maydell
Now we have a working '-cpu max', the linux-user-only 'any' CPU is pretty much the same thing, so implement it that way. For the moment we don't add any of the extra feature bits to the system-emulation "max", because we don't set the ID register bits we would need to to advertise those features as present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180308130626.12393-5-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-03-09target/arm: Add "-cpu max" supportPeter Maydell
Add support for "-cpu max" for ARM guests. This CPU type behaves like "-cpu host" when KVM is enabled, and like a system CPU with the maximum possible feature set otherwise. (Note that this means it won't be migratable across versions, as we will likely add features to it in future.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180308130626.12393-4-peter.maydell@linaro.org
2018-03-09linux-user: Implement aarch64 PR_SVE_SET/GET_VLRichard Henderson
As an implementation choice, widening VL has zeroed the previously inaccessible portion of the sve registers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180303143823.27055-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09target/arm: Add a core count propertyAlistair Francis
The cortex A53 TRM specifies that bits 24 and 25 of the L2CTLR register specify the number of cores in the processor, not the total number of cores in the system. To report this correctly on machines with multiple CPU clusters (ARM's big.LITTLE or Xilinx's ZynqMP) we need to allow the machine to overwrite this value. To do this let's add an optional property. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: ef01d95c0759e88f47f22d11b14c91512a658b4f.1520018138.git.alistair.francis@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Enable ARM_FEATURE_V8_FCMARichard Henderson
Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Enable ARM_FEATURE_V8_RDMRichard Henderson
Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPUPeter Maydell
Now we have implemented FP16 we can enable it for the "any" CPU. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: split out from an earlier patch in the series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09target/arm: enable user-mode SHA-3, SM3, SM4 and SHA-512 instruction supportArd Biesheuvel
Add support for the new ARMv8.2 SHA-3, SM3, SM4 and SHA-512 instructions to AArch64 user mode emulation. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-6-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 13:59:42 +0000