aboutsummaryrefslogtreecommitdiff
path: root/target/arm/cpu.c
AgeCommit message (Collapse)Author
2017-09-07target/arm: Make MPU_RNR register banked for v8MPeter Maydell
Make the MPU_RNR register banked if v8M security extensions are enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1503414539-28762-15-git-send-email-peter.maydell@linaro.org
2017-09-07target/arm: Make MPU_RBAR, MPU_RLAR banked for v8MPeter Maydell
Make the MPU registers MPU_MAIR0 and MPU_MAIR1 banked if v8M security extensions are enabled. We can freely add more items to vmstate_m_security without breaking migration compatibility, because no CPU currently has the ARM_FEATURE_M_SECURITY bit enabled and so this subsection is not yet used by anything. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1503414539-28762-14-git-send-email-peter.maydell@linaro.org
2017-09-07target/arm: Make MPU_MAIR0, MPU_MAIR1 registers banked for v8MPeter Maydell
Make the MPU registers MPU_MAIR0 and MPU_MAIR1 banked if v8M security extensions are enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1503414539-28762-13-git-send-email-peter.maydell@linaro.org
2017-09-07target/arm: Register second AddressSpace for secure v8M CPUsPeter Maydell
If a v8M CPU supports the security extension then we need to give it two AddressSpaces, the same way we do already for an A profile core with EL3. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1503414539-28762-5-git-send-email-peter.maydell@linaro.org
2017-09-07target/arm: Add state field, feature bit and migration for v8M secure statePeter Maydell
As the first step in implementing ARM v8M's security extension: * add a new feature bit ARM_FEATURE_M_SECURITY * add the CPU state field that indicates whether the CPU is currently in the secure state * add a migration subsection for this new state (we will add the Secure copies of banked register state to this subsection in later patches) * add a #define for the one new-in-v8M exception type * make the CPU debug log print S/NS status Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1503414539-28762-4-git-send-email-peter.maydell@linaro.org
2017-09-07target/arm: Implement ARMv8M's PMSAv8 registersPeter Maydell
As part of ARMv8M, we need to add support for the PMSAv8 MPU architecture. PMSAv8 differs from PMSAv7 both in register/data layout (for instance using base and limit registers rather than base and size) and also in behaviour (for example it does not have subregions); rather than trying to wedge it into the existing PMSAv7 code and data structures, we define separate ones. This commit adds the data structures which hold the state for a PMSAv8 MPU and the register interface to it. The implementation of the MPU behaviour will be added in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1503414539-28762-2-git-send-email-peter.maydell@linaro.org
2017-09-04hw/arm/virt: add pmu interrupt stateAndrew Jones
Mimicking gicv3-maintenance-interrupt, add the PMU's interrupt to CPU state. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500471597-2517-2-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-04target/arm: Don't store M profile PRIMASK and FAULTMASK in daifPeter Maydell
We currently store the M profile CPU register state PRIMASK and FAULTMASK in the daif field of the CPU state in its I and F bits. This is a legacy from the original implementation, which tried to share the cpu_exec_interrupt code between A profile and M profile. We've since separated out the two cases because they are significantly different, so now there is no common code between M and A profile which looks at env->daif: all the uses are either in A-only or M-only code paths. Sharing the state fields now is just confusing, and will make things awkward when we implement v8M, where the PRIMASK and FAULTMASK registers are banked between security states. Switch M profile over to using v7m.faultmask and v7m.primask fields for these registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1501692241-23310-10-git-send-email-peter.maydell@linaro.org
2017-07-31target/arm: Move PMSAv7 reset into arm_cpu_reset() so M profile MPUs get resetPeter Maydell
When the PMSAv7 implementation was originally added it was for R profile CPUs only, and reset was handled using the cpreg .resetfn hooks. Unfortunately for M profile cores this doesn't work, because they do not register any cpregs. Move the reset handling into arm_cpu_reset(), where it will work for both R profile and M profile cores. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1501153150-19984-5-git-send-email-peter.maydell@linaro.org
2017-07-17target/arm: Make Cortex-M3 and M4 default to 8 PMSA regionsPeter Maydell
The Cortex-M3 and M4 CPUs always have 8 PMSA MPU regions (this isn't a configurable option for the hardware). Make the default value of the pmsav7-dregion property be set per-cpu, so we don't need to have every user of these CPUs set it manually. (The existing default of 16 is correct for the other PMSAv7 core, the Cortex-R5.) This fixes a bug where we were creating the M3 and M4 with too many regions; most guest software would not notice or care, though, since it would just not use the registers associated with the unexpected extra regions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1499788408-10096-4-git-send-email-peter.maydell@linaro.org
2017-06-06Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging x86 and machine queue, 2017-06-05 # gpg: Signature made Mon 05 Jun 2017 19:58:01 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: scripts: Test script to look for -device crashes qemu.py: Add QEMUMachine.exitcode() method qemu.py: Don't set _popen=None on error/shutdown spapr: cleanup spapr_fixup_cpu_numa_dt() usage numa: move numa_node from CPUState into target specific classes numa: make hmp 'info numa' fetch numa nodes from qmp_query_cpus() result numa: make sure that all cpus have has_node_id set if numa is enabled numa: move default mapping init to machine numa: consolidate cpu_preplug fixups/checks for pc/arm/spapr pc: Use "min-[x]level" on compat_props Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-05numa: move numa_node from CPUState into target specific classesIgor Mammedov
Move vcpu's associated numa_node field out of generic CPUState into inherited classes that actually care about cpu<->numa mapping, i.e: ARMCPU, PowerPCCPU, X86CPU. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1496161442-96665-6-git-send-email-imammedo@redhat.com> [ehabkost: s/CPU is belonging to/CPU belongs to/ on comments] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-06-04target/arm: add data cache invalidation cp15 instruction to cortex-r5Luc MICHEL
The cp15, CRn=15, opc1=0, CRm=5, opc2=0 instruction invalidates all the data cache on the cortex-r5. Implementing it as a NOP. Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-06-02arm: All M profile cores are PMSAPeter Maydell
All M profile CPUs are PMSA, so set the feature bit. (We haven't actually implemented the M profile MPU register interface yet, but setting this feature bit gives us closer to correct behaviour for the MPU-disabled case.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-11-git-send-email-peter.maydell@linaro.org
2017-06-02arm: Don't clear ARM_FEATURE_PMSA for no-mpu configsPeter Maydell
Fix the handling of QOM properties for PMSA CPUs with no MPU: Allow no-MPU to be specified by either: * has-mpu = false * pmsav7_dregion = 0 and make setting one imply the other. Don't clear the PMSA feature bit in this situation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-6-git-send-email-peter.maydell@linaro.org
2017-06-02arm: Clean up handling of no-MPU PMSA CPUsPeter Maydell
ARM CPUs come in two flavours: * proper MMU ("VMSA") * only an MPU ("PMSA") For PMSA, the MPU may be implemented, or not (in which case there is default "always acts the same" behaviour, but it isn't guest programmable). QEMU is a bit confused about how we indicate this: we have an ARM_FEATURE_MPU, but it's not clear whether this indicates "PMSA, not VMSA" or "PMSA and MPU present" , and sometimes we use it for one purpose and sometimes the other. Currently trying to implement a PMSA-without-MPU core won't work correctly because we turn off the ARM_FEATURE_MPU bit and then a lot of things which should still exist get turned off too. As the first step in cleaning this up, rename the feature bit to ARM_FEATURE_PMSA, which indicates a PMSA CPU (with or without MPU). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-5-git-send-email-peter.maydell@linaro.org
2017-06-02target/arm: clear PMUVER field of AA64DFR0 when vPMU=offWei Huang
The PMUv3 driver of linux kernel (in arch/arm64/kernel/perf_event.c) relies on the PMUVER field of id_aa64dfr0_el1 to decide if PMU support is present or not. This patch clears the PMUVER field under TCG mode when vPMU=off. Without it, PMUv3 will init insider guest VMs even with vPMU=off. This patch also removes a redundant line inside the if-statement. Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1495123889-32301-1-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-05-11virt-arm: add node-id property to CPUIgor Mammedov
it will allow switching from cpu_index to property based numa mapping in follow up patches. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <1494415802-227633-5-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11hw/arm/virt: extract mp-affinity calculation in separate functionIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1493816238-33120-3-git-send-email-imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-20arm: Remove workarounds for old M-profile exception return implementationPeter Maydell
Now that we've rewritten M-profile exception return so that the magic PC values are not visible to other parts of QEMU, we can delete the special casing of them elsewhere. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1491844419-12485-10-git-send-email-peter.maydell@linaro.org
2017-02-28armv7m: Fix condition check for taking exceptionsPeter Maydell
The M profile condition for when we can take a pending exception or interrupt is not the same as that for A/R profile. The code originally copied from the A/R profile version of the cpu_exec_interrupt function only worked by chance for the very simple case of exceptions being masked by PRIMASK. Replace it with a call to a function in the NVIC code that correctly compares the priority of the pending exception against the current execution priority of the CPU. [Michael Davidsaver's patchset had a patch to do something similar but the implementation ended up being a rewrite.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-24target-arm/powerctl: defer cpu reset work to CPU contextAlex Bennée
When switching a new vCPU on we want to complete a bunch of the setup work before we start scheduling the vCPU thread. To do this cleanly we defer vCPU setup to async work which will run the vCPUs execution context as the thread is woken up. The scheduling of the work will kick the vCPU awake. This avoids potential races in MTTCG system emulation. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10target-arm: Enable vPMU support under TCG modeWei Huang
This patch contains several fixes to enable vPMU under TCG mode. It first removes the checking of kvm_enabled() while unsetting ARM_FEATURE_PMU. With it, the .pmu option can be used to turn on/off vPMU under TCG mode. Secondly the PMU node of DT table is now created under TCG. The last fix is to disable the masking of PMUver field of ID_AA64DFR0_EL1. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1486504171-26807-5-git-send-email-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07arm: Correctly handle watchpoints for BE32 CPUsJulian Brown
In BE32 mode, sub-word size watchpoints can fail to trigger because the address of the access is adjusted in the opcode helpers before being compared with the watchpoint registers. This patch reverses the address adjustment before performing the comparison with the help of a new CPUClass hook. This version of the patch augments and tidies up comments a little. Signed-off-by: Julian Brown <julian@codesourcery.com> Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07Fix Thumb-1 BE32 execution and disassembly.Julian Brown
Thumb-1 code has some issues in BE32 mode (as currently implemented). In short, since bytes are swapped within words at load time for BE32 executables, this also swaps pairs of adjacent Thumb-1 instructions. This patch un-swaps those pairs of instructions again, both for execution, and for disassembly. (The previous version of the patch always read four bytes in arm_read_memory_func and then extracted the proper two bytes, in a probably misguided attempt to match the behaviour of actual hardware as described by e.g. the ARM9TDMI TRM, section 3.3 "Endian effects for instruction fetches". It's less complicated to just read the correct two bytes though.) Signed-off-by: Julian Brown <julian@codesourcery.com> Message-id: ca20462a044848000370318a8bd41dd0a4ed273f.1484929304.git.julian@codesourcery.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07target/arm: Add cfgend parameter for ARM CPU selection.Julian Brown
Add a new "cfgend" property which selects whether the CPU resets into big-endian mode or not. This setting affects whether we reset with SCTLR_B (ARMv6 and earlier) or SCTLR_EE (ARMv7 and later) set. Signed-off-by: Julian Brown <julian@codesourcery.com> Message-id: 11420d1c49636c1790e60578ee996e51f0f0b835.1484929304.git.julian@codesourcery.com [PMM: use error_report_err() rather than error_report(); move the integratorcp changes to their own patch; drop an unnecessary extra #include; rephrase commit message accordingly; move setting of reset_sctlr above registration of cpregs so it actually has an effect] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27armv7m: R14 should reset to 0xffffffffPeter Maydell
For M profile (unlike A profile) the reset value of R14 is specified as 0xffffffff. (The rationale is that this is an illegal exception return value, so if guest code tries to return to it it will result in a helpful exception.) Registers r0 to r12 and the flags are architecturally UNKNOWN on reset, so we leave those at zero. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1485285380-10565-11-git-send-email-peter.maydell@linaro.org
2017-01-27armv7m: FAULTMASK should be 0 on resetMichael Davidsaver
For M profile CPUs, FAULTMASK should be 0 on reset, like PRIMASK. QEMU stores FAULTMASK in the PSTATE F bit, so (as with PRIMASK in the I bit) we have to clear these to undo the A profile default of 1. Update the comment accordingly and move it so that it's closer to the code it's referring to. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1485285380-10565-10-git-send-email-peter.maydell@linaro.org [PMM: rewrote commit message, moved comments] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27armv7m: add state for v7M CCR, CFSR, HFSR, DFSR, MMFAR, BFARPeter Maydell
Add the structure fields, VMState fields, reset code and macros for the v7M system control registers CCR, CFSR, HFSR, DFSR, MMFAR and BFAR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1485285380-10565-4-git-send-email-peter.maydell@linaro.org
2017-01-27target/arm: Drop IS_M() macroPeter Maydell
We only use the IS_M() macro in two places, and it's a bit of a namespace grab to put in cpu.h. Drop it in favour of just explicitly calling arm_feature() in the places where it was used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1485285380-10565-2-git-send-email-peter.maydell@linaro.org
2017-01-27armv7m: Replace armv7m.hack with unassigned_access handlerMichael Davidsaver
For v7m we need to catch attempts to execute from special addresses at 0xfffffff0 and above. Previously we did this with the aid of a hacky special purpose lump of memory in the address space and a check in translate.c for whether we were translating code at those addresses. We can implement this more cleanly using a CPU unassigned access handler which throws the exception if the unassigned access is for one of the special addresses. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1484937883-1068-3-git-send-email-peter.maydell@linaro.org [PMM: * drop the deletion of the "don't interrupt if PC is magic" code in arm_v7m_cpu_exec_interrupt() -- this is still required * don't generate an exception for unassigned accesses which aren't to the magic address -- although doing this is in theory correct in practice it will break currently working guests which rely on the RAZ/WI behaviour when they touch devices which we haven't modelled. * trigger EXCP_EXCEPTION_EXIT on is_exec, not !is_write ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* QOM interface fix (Eduardo) * RTC fixes (Gaohuai, Igor) * Memory leak fixes (Li Qiang, me) * Ctrl-a b regression (Marc-André) * Stubs cleanups and fixes (Leif, me) * hxtool tweak (me) * HAX support (Vincent) * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me) * PC_COMPAT_2_8 fix (Marcelo) * stronger bitmap assertions (Peter) # gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8 bitmap: assert that start and nr are non negative Revert "win32: don't run subprocess tests on Mingw32 platform" hax: add Darwin support Plumb the HAXM-based hardware acceleration support target/i386: Add Intel HAX files kvm: move cpu synchronization code KVM: PPC: eliminate unnecessary duplicate constants ramblock-notifier: new char: fix ctrl-a b not working exec: Add missing rcu_read_unlock x86: ioapic: fix fail migration when irqchip=split x86: ioapic: dump version for "info ioapic" x86: ioapic: add traces for ioapic hxtool: emit Texinfo headings as @subsection qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create() serial: fix memory leak in serial exit scsi-block: fix direction of BYTCHK test for VERIFY commands pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged acpi: filter based on CONFIG_ACPI_X86 rather than TARGET ... # Conflicts: # include/hw/i386/pc.h
2017-01-20target-arm: Enable EL2 feature bit on A53 and A57Peter Maydell
Enable the ARM_FEATURE_EL2 bit on Cortex-A52 and Cortex-A57, since this is all now sufficiently implemented to work with the GICv3. We provide the usual CPU property to disable it for backwards compatibility with the older virt boards. In this commit, we disable the EL2 feature on the virt and ZynpMP boards, so there is no overall effect. Another commit will expose a board-level property to allow the user to enable EL2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1483977924-14522-18-git-send-email-peter.maydell@linaro.org
2017-01-20target-arm: Expose output GPIO line for VCPU maintenance interruptPeter Maydell
The GICv3 support for virtualization includes an outbound maintenance interrupt signal which is asserted when the CPU interface wants to signal to the hypervisor that it needs attention. Expose this as an outbound GPIO line from the CPU object which can be wired up as a physical interrupt line by the board code (as we do already for the CPU timers). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1483977924-14522-4-git-send-email-peter.maydell@linaro.org
2017-01-19kvm: move cpu synchronization codeVincent Palatin
Move the generic cpu_synchronize_ functions to the common hw_accel.h header, in order to prepare for the addition of a second hardware accelerator. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-13qom/cpu: move tlb_flush to cpu_common_resetAlex Bennée
It is a common thing amongst the various cpu reset functions want to flush the SoftMMU's TLB entries. This is done either by calling tlb_flush directly or by way of a general memset of the CPU structure (sometimes both). This moves the tlb_flush call to the common reset function and additionally ensures it is only done for the CONFIG_SOFTMMU case and when tcg is enabled. In some target cases we add an empty end_of_reset_fields structure to the target vCPU structure so have a clear end point for any memset which is resetting value in the structure before CPU_COMMON (where the TLB structures are). While this is a nice clean-up in general it is also a precursor for changes coming to cputlb for MTTCG where the clearing of entries can't be done arbitrarily across vCPUs. Currently the cpu_reset function is usually called from the context of another vCPU as the architectural power up sequence is run. By using the cputlb API functions we can ensure the right behaviour in the future. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2016-12-27target-arm: Add VBAR support to ARM1176 CPUsCédric Le Goater
ARM1176 CPUs have TrustZone support and can use the Vector Base Address Register, but currently, qemu only adds VBAR support to ARMv7 CPUs. Fix this by adding a new feature ARM_FEATURE_VBAR which can used for ARMv7 and ARM1176 CPUs. The VBAR feature is always set for ARMv7 because some legacy boards require it even if this is not architecturally correct. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1481810970-9692-1-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27Correct value of ARM Cortex-A8 MVFR1 register.Julian Brown
The value of the MVFR1 (Media and VFP Feature Register 1) register for the Cortex-A8 appears to be incorrect (according to the TRM, DDI0344K), with the "full denormal arithmetic" and "propagation of NaN" fields holding both 0 instead of both 1. I had a go tracing the history of the use of this value, and it seems it's always just been wrong in QEMU: maybe it was derived from early documentation, or guessed based on the use of a "VFP Lite" implementation in the Cortex-A8. Depending on the startup/early-boot code in use, this can manifest as failure to perform denormal arithmetic properly: in our case, selecting a Cortex-A8 CPU when using QEMU as an instruction-set simulator for bare-metal GCC testing caused tests using denormal arithmetic to fail. Problems might be masked (or not occur) when using a full OS kernel with suitable trap handlers (I'm not sure). Signed-off-by: Julian Brown <julian@codesourcery.com> Message-id: 1481130858-31767-1-git-send-email-julian@codesourcery.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-19 02:31:39 +0000