aboutsummaryrefslogtreecommitdiff
path: root/target-xtensa
AgeCommit message (Collapse)Author
2012-10-28target-xtensa: rename helper flagsAurelien Jarno
Rename helper flags to the new ones. This is purely a mechanical change, it's possible to use better flags by looking at the helpers. Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-06target-xtensa: de-optimize EXTUIAurelien Jarno
Now that "and" with 0xff, 0xffff and 0xffffffff and "shr" with 0 shift are optimized in tcg/tcg-op.h there is no need to do it in target-xtensa/translate.c. Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-27Emit debug_insn for CPU_LOG_TB_OP_OPT as well.Richard Henderson
For all targets that currently call tcg_gen_debug_insn_start, add CPU_LOG_TB_OP_OPT to the condition that gates it. This is useful for comparing optimization dumps, when the pre-optimization dump is merely noise. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22target-xtensa: implement coprocessor context optionMax Filippov
In case Coprocessor Context option is enabled CPENABLE SR bits control whether access to coprocessors is allowed or would rise one of CoprocessorXDisabled exceptions. See ISA, 4.4.5 for more details. FP is coprocessor 0. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: implement FP1 groupMax Filippov
These are comparison and conditional move opcodes. See ISA, 4.3.10 for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: implement FP0 conversionsMax Filippov
These are FP to integer and integer to FP conversion opcodes. See ISA, 4.3.10 for more details. Note that ISA description for utrunc.s is currently incorrect and will be fixed in future revisions. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: implement FP0 arithmeticMax Filippov
These are FP arithmetic opcodes. See ISA, 4.3.10 for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: implement LSCX and LSCI groupsMax Filippov
These are load/store instructions for FP registers with immediate or register index and optional base post-update. See ISA, 4.3.10 for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: add FP registersMax Filippov
There are 16 32-bit FP registers (f0 - f15), control and status user registers (fcr, fsr). See ISA, 4.3.10 for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: handle boolean option in overlaysMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-21target-xtensa: don't emit extra tcg_gen_goto_tbMax Filippov
Unconditional gen_check_loop_end at the end of disas_xtensa_insn can emit tcg_gen_goto_tb with slot id already used in the TB (e.g. when TB ends at LEND with a branch). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: malc <av1474@comtv.ru>
2012-09-21target-xtensa: fix extui shift amountMax Filippov
extui opcode only uses lowermost op1 bit for sa4. Reported-by: malc <av1474@comtv.ru> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: malc <av1474@comtv.ru>
2012-09-08target-xtensa: fix missing errno codes for mingw32Max Filippov
Put the following errno value mappings under #ifdef: xtensa-semi.c: In function 'errno_h2g': xtensa-semi.c:113: error: 'ENOTBLK' undeclared (first use in this function) xtensa-semi.c:113: error: (Each undeclared identifier is reported only once xtensa-semi.c:113: error: for each function it appears in.) xtensa-semi.c:113: error: array index in initializer not of integer type xtensa-semi.c:113: error: (near initialization for 'guest_errno') xtensa-semi.c:124: error: 'ETXTBSY' undeclared (first use in this function) xtensa-semi.c:124: error: array index in initializer not of integer type xtensa-semi.c:124: error: (near initialization for 'guest_errno') xtensa-semi.c:134: error: 'ELOOP' undeclared (first use in this function) xtensa-semi.c:134: error: array index in initializer not of integer type xtensa-semi.c:134: error: (near initialization for 'guest_errno') Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-05target-xtensa: convert host errno values to guestMax Filippov
Guest errno values are taken from the newlib. Convert only those errno values that can be returned from used system calls. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-01target-xtensa: return ENOSYS for unimplemented simcallsMax Filippov
This prevents guest from proceeding with uninitialised garbage returned from unimplemented simcalls. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09Merge branch 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemuBlue Swirl
* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu: target-i386: move tcg initialization into x86_cpu_initfn() cleanup cpu_set_debug_excp_handler target-xtensa: drop usage of prev_debug_excp_handler target-i386: drop usage of prev_debug_excp_handler
2012-08-09target-xtensa: make default CPU depend on target endiannessMax Filippov
This makes usable default for -cpu option both for qemu-system-xtensa and qemu-system-xtensaeb fixing the following error: $ qemu-system-xtensaeb -M sim Unable to find CPU definition Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-28target-xtensa: fix big-endian BBS/BBC implementationMax Filippov
Quote from ISA, 2.1: For most Xtensa instructions, bit numbering is irrelevant; only the BBC and BBS instructions assign bit numbers to values on which the processor operates. The BBC/BBS instructions use big-endian bit ordering (0 is the most-significant bit) on a big-endian processor configuration. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-25target-xtensa: drop usage of prev_debug_excp_handlerIgor Mammedov
Chains of exception handlers are currently unused feature. Dropping it to be consistent with target-i386 but it may simplify qom-ifying CPU in future like for target-i386. Signed-off-by: Igor Mammedov <imammedo@redhat.com>
2012-06-10target-xtensa: switch to AREG0-free modeMax Filippov
Add env parameter to every helper function that needs it, update 'configure' script. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-10target-xtensa: add attributes to helper functionsMax Filippov
Mark exception generating functions 'noreturn' and pure constant functions as such. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-10target-xtensa: remove unnecessary include of dyngen-exec.hPeter Portante
Signed-off-by: Peter Portante <peter.portante@redhat.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: fix CCOUNT for conditional branchesMax Filippov
Taken conditional branches fail to update CCOUNT register because accumulated ccount_delta is reset during translation of non-taken branch. To fix it only update CCOUNT once per conditional branch instruction translation. This fixes guest linux freeze on LTP waitpid06 test. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: control page table lookup explicitlyMax Filippov
Hardware pagetable walking may not be nested. Stop guessing and pass explicit flag to the get_physical_addr_mmu function that controls page table lookup. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: update autorefill TLB entries conditionallyMax Filippov
This is to avoid interference of internal QEMU helpers (cpu_get_phys_page_debug, tb_invalidate_virtual_addr) with guest-visible TLB state. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: extract TLB entry setting methodMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: update EXCVADDR in case of page table lookupMax Filippov
According to ISA, 4.4.2.6, EXCVADDR may be changed by any TLB miss, even if the miss is handled entirely by processor hardware. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: flush TLB page for new MMU mappingMax Filippov
Both old and new mappings need flushing because their VPN may be different in MMU case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-07build: move other target-*/ objects to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move libobj-y variable to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move obj-TARGET-y variables to nested Makefile.objsPaolo Bonzini
Also drop duplicate occurrence of device-hotplug.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-04Kill off cpu_state_reset()Andreas Färber
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset() was renamed to cpu_state_reset(), to allow introducing a new cpu_reset() that would operate on QOM objects. All callers have been updated except for one in target-mips, so drop all implementations except for the one in target-mips and move the declaration there until MIPSCPU reset can be fully QOM'ified. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris) Acked-by: Alexander Graf <agraf@suse.de> (for ppc) Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04target-xtensa: Let cpu_xtensa_init() return XtensaCPUAndreas Färber
Make the include paths for cpu-qom.h consistent to allow using XtensaCPU in cpu.h. Turn cpu_init macro into a static inline function returning CPUXtensaState for backwards compatibility. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
2012-04-21target-xtensa: fix LOOPNEZ/LOOPGTZ translationMax Filippov
Translation of LOOP instructions used to call LEND SR write handler to update LEND and invalidate relevant TBs. Now that LEND SR write handler ends TB, LOOPNEZ and LOOPGTZ generate wrong code (same as for simple LOOP). Fix it by calling wsr_lend helper directly. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-15target-xtensa: add license to core-fsf.cMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-15target-xtensa: add license to core-dc232b.cMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-15target-xtensa: add dc233c coreMax Filippov
This is Diamond 233L Standard Core Rev.C (LE), implemented through linux/gdb overlay. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-14target-xtensa: fix tb invalidation for IBREAK and LOOPMax Filippov
Instruction breakpoint/zero overhead loop handling code is built into TBs pointed to by IBREAKA/LEND SRs. When these or related SRs get changed TBs at virtual addresses corresponding to their old and their new values must be invalidated. Virtual address range is passed to the tb_invalidate_phys_page_range, which is incorrect in system emulation mode. To fix it use guest TLB/MMU to translate virtual address to physical address. However the guest may not have virtual-to-physical mapping at the moment of IBREAKA/LEND change, thus this fix is not 100% accurate. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-14Use uintptr_t for various op related functionsBlue Swirl
Use uintptr_t instead of void * or unsigned long in several op related functions, env->mem_io_pc and GETPC() macro. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-14target-xtensa: Start QOM'ifying CPU initAndreas Färber
Move XtensaConfig-independent code from cpu_xtensa_init() into a QOM initfn, as a start. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2012-04-14target-xtensa: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() into QOM xtensa_cpu_reset(). To avoid moving reset_mmu() and dependencies, make it non-static. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2012-04-14target-xtensa: QOM'ify CPUAndreas Färber
Embed CPUXtensaState as first member of XtensaCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2012-04-14target-xtensa: Move helpers.h to helper.hLluís Vilanova
Provides a file naming scheme consistent with other targets. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-xtensa: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUXtensaState/g" target-xtensa/*.[hc] sed -i "s/#define CPUXtensaState/#define CPUState/" target-xtensa/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename cpu_reset() to cpu_state_reset()Andreas Färber
Frees the identifier cpu_reset for QOM CPUs (manual rename). Don't hide the parameter type behind explicit casts, use static functions with strongly typed argument to indirect. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-03Merge branch 'upstream' of git://qemu.weilnetz.de/qemuBlue Swirl
* 'upstream' of git://qemu.weilnetz.de/qemu: Move definition of HOST_LONG_BITS to qemu-common.h target-xtensa: Clean includes target-unicore32: Clean includes target-sh4: Clean includes target-s390x: Clean includes target-ppc: Clean includes target-mips: Clean includes target-microblaze: Clean includes target-m68k: Clean includes target-lm32: Clean includes target-i386: Clean includes target-cris: Clean includes target-arm: Clean includes target-alpha: Clean includes Remove macro HOST_LONG_SIZE
2012-02-28target-xtensa: Clean includesStefan Weil
Remove some include statements which are not needed. Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-02-20target-xtensa: add DEBUG_SECTION to overlay toolMax Filippov
Fill debug configuration from overlay definitions in the DEBUG_SECTION. Add DEBUG_SECTION to DC232B and FSF cores. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 18:12:29 +0000