aboutsummaryrefslogtreecommitdiff
path: root/target-sh4
AgeCommit message (Collapse)Author
2012-09-27Emit debug_insn for CPU_LOG_TB_OP_OPT as well.Richard Henderson
For all targets that currently call tcg_gen_debug_insn_start, add CPU_LOG_TB_OP_OPT to the condition that gates it. This is useful for comparing optimization dumps, when the pre-optimization dump is merely noise. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: remove useless codeAurelien Jarno
Almost dead code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: cleanup DisasContextAurelien Jarno
We should avoid accessing env at translation stage, except of course for static values like the supported features. Remove variables copied from env in DisasContext and use the TB flags instead. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: rework exceptions handlingAurelien Jarno
Since commit fd4bab102 PC is restored in case of exception through code retranslation. While it is clearly the thing to do in case it is not not known if an helper is going to trigger an exception or not (e.g. for load/store, FPU, etc.), it just make things slower when the exception is already known at translation time. Partially revert this commit and save PC in the TCG code. Set bstate to BS_BRANCH to not generate TCG exit code. Micro-optimize the sleep helper. Make all the exception helpers to call raise_exception and mark it as noreturn. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: remove gen_clr_t() and gen_set_t()Aurelien Jarno
gen_clr_t() and gen_set_t() have very few callers and can be remplaced by a single line. Remove them. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: optimize swap.wAurelien Jarno
It's possible swap the two 16-bit words of a 32-bit register using a rotation. If the TCG target doesn't implement rotation, the replacement code is similar to the previously implemented code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: optimize xtrctAurelien Jarno
The register being 32 bit long, after a shift to the right by 16 bits, the upper 16 bit are already cleared. There is no need to call ext16u to clear them. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: implement addv and subv using TCGAurelien Jarno
addv and subv helpers implementation is directly copied from the SH4 manual and looks quite complex. It is however possible to explain it without branches, and is therefore possible to implement it with TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: implement addc and subc using TCGAurelien Jarno
Now that setcond is available, the addc and subc can easily be implemented using TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: use float32_muladd() to implement fmacAurelien Jarno
There is no need to add a SH4 specific pickNaNMulAdd() to softfloat as SH4 is always returning a default NaN. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: mark a few helpers const and pureAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15target-sh4: switch to AREG0 free modeBlue Swirl
Add an explicit CPUState parameter instead of relying on AREG0 and switch to AREG0 free mode. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-07build: move other target-*/ objects to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move libobj-y variable to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move obj-TARGET-y variables to nested Makefile.objsPaolo Bonzini
Also drop duplicate occurrence of device-hotplug.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-04Kill off cpu_state_reset()Andreas Färber
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset() was renamed to cpu_state_reset(), to allow introducing a new cpu_reset() that would operate on QOM objects. All callers have been updated except for one in target-mips, so drop all implementations except for the one in target-mips and move the declaration there until MIPSCPU reset can be fully QOM'ified. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris) Acked-by: Alexander Graf <agraf@suse.de> (for ppc) Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04target-sh4: Let cpu_sh4_init() return SuperHCPUAndreas Färber
Turn cpu_init macro into a static inline function returning CPUSH4State for backwards compatibility. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-30target-sh4: Start QOM'ifying CPU initAndreas Färber
Move code from cpu_sh4_init() into a QOM initfn. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-30target-sh4: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() to QOM superh_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-30target-sh4: QOM'ify CPUAndreas Färber
Embed CPUSH4State as first member of SuperHCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-14Use uintptr_t for various op related functionsBlue Swirl
Use uintptr_t instead of void * or unsigned long in several op related functions, env->mem_io_pc and GETPC() macro. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-sh4: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc] sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename cpu_reset() to cpu_state_reset()Andreas Färber
Frees the identifier cpu_reset for QOM CPUs (manual rename). Don't hide the parameter type behind explicit casts, use static functions with strongly typed argument to indirect. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-28target-sh4: Clean includesStefan Weil
Remove some include statements which are not needed. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-01-10target-sh4: ignore ocbp and ocbwb instructionsAurelien Jarno
ocbp and ocbwb controls the writeback of a cache line to memory. They are supposed to do nothing in case of a cache miss. Given QEMU only partially emulate caches, it is safe to ignore these instructions. This fixes a kernel oops when trying to access an rtl8139 NIC with recent versions. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-01-07target-sh4: Fix operands for fipr, ftrv instructionsStefan Weil
Coverity complained about right shifts of opcode (16, 18) which were larger than the size of opcode (16 bit). Using the correct shift values fixes this. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-12-05Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-12-02fix spelling in target sub directoryDong Xu Wang
Cc: Richard Henderson <rth@twiddle.net> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-24sh_intc: convert interrupt controller to memory APIBenoît Canet
Signed-off-by: Benoit Canet <benoit.canet@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-01softmmu_header: pass CPUState to tlb_fillBlue Swirl
Pass CPUState pointer to tlb_fill() instead of architecture local cpu_single_env hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-07Remove unused is_softmmu parameter from cpu_handle_mmu_faultBlue Swirl
Parameter is_softmmu (and its evil mutant twin brother is_softmuu) is not used in cpu_*_handle_mmu_fault() functions, remove them and adjust callers. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30exec.h cleanupBlue Swirl
Move softmmu_exec.h include directives from target-*/exec.h to target-*/op_helper.c. Move also various other stuff only used in op_helper.c there. Define global env in dyngen-exec.h. For i386, move wrappers for segment and FPU helpers from user-exec.c to op_helper.c. Implement raise_exception_err_env() to handle dynamic CPUState. Move the function declarations to cpu.h since they can be used outside of op_helper.c context. LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and env_to_regs(). ARM: make raise_exception() static. Convert #include "exec.h" to #include "cpu.h" #include "dyngen-exec.h" and remove now unused target-*/exec.h. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Move cpu_has_work and cpu_pc_from_tb to cpu.hBlue Swirl
Move functions cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. This is needed by later patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26exec.h: fix coding style and change cpu_has_work to return boolBlue Swirl
Before the next patch, fix coding style of the areas affected. Change the type of the return value from cpu_has_work() and qemu_cpu_has_work() to bool. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26cpu_loop_exit: avoid using AREG0Blue Swirl
Make cpu_loop_exit() take a parameter for CPUState instead of relying on global env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-20Remove unused function parameter from cpu_restore_stateStefan Weil
The previous patch removed the need for parameter puc. Is is now unused, so remove it. Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2011-04-20Remove unused function parameters from gen_pc_load and rename the functionStefan Weil
Function gen_pc_load was introduced in commit d2856f1ad4c259e5766847c49acbb4e390731bd4. The only reason for parameter searched_pc was a debug statement in target-i386/translate.c. Parameter puc was needed by target-sparc until commit d7da2a10402f1644128b66414ca8f86bdea9ae7c. Remove searched_pc from the debug statement and remove both parameters from the parameter list of gen_pc_load. As the function name gen_pc_load was also misleading, it is now called restore_state_to_opc. This new name was suggested by Peter Maydell, thanks. v2: Remove last parameter, too, and rename the function. v3: Fix [] typo in target-arm/translate.c. Fix wrong SHA1 object name in commit message (copy+paste error). Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2011-04-12target-sh4: get rid of CPU_{Float,Double}UAurelien Jarno
SH4 is always using softfloat, so it's possible to have helpers directly taking float32 or float64 value. This allow to get rid of conversions through CPU_{Float,Double}U. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-10Fix conversions from pointer to tcg_target_longStefan Weil
tcg_gen_exit_tb takes a parameter of type tcg_target_long, so the type casts of pointer to long should be replaced by type casts of pointer to tcg_target_long (suggested by Blue Swirl). These changes are needed for build environments where sizeof(long) != sizeof(void *), especially for w64. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-13inline cpu_halted into sole callerPaolo Bonzini
All implementations are now the same, and there is only one caller, so inline the function there. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-03target-sh4: move intr_at_halt out of cpu_halted()Aurelien Jarno
All targets except SH4 have the same cpu_halted() routine, and it has only one caller. It is therefore a good candidate for inlining. The difference is the handling of the intr_at_halt, which is necessary to ignore SR.BL when sleeping. Move intr_at_halt handling out of it, by setting this variable while executing the sleep instruction, and clearing it when the CPU has been woken-up by an interrupt, whatever the state of SR.BL. Also rename this variable in_sleep. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-04target-sh4: fix negcAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26target-sh4: update PTEH upon MMU exceptionAlexandre Courbot
Update the PTEH register to contain the VPN at which an MMU exception occured as specified by the SH4 reference. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26sh4: implement missing mmaped TLB read functionsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26sh4: implement missing mmaped TLB write functionsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-25target-sh4: fix index of address read error exceptionAlexandre Courbot
Exception index of address read error should be 0x0e0. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-25target-sh4: fix TLB invalidation codeAlexandre Courbot
In cpu_sh4_invalidate_tlb, the UTLB was invalidated twice and the ITLB left unchaged, probably because of some unfortunate copy/paste. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-03 13:38:26 +0000